Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

IT Support Engineer

Responsibilities:

- Installing and configuring computer hardware, software, systems, networks, printers etc

- Responding in a timely manner to service issues and requests

- Providing technical support across customers

- On-site support for IT related issues at customer office

- Performing & maintaining customers’ IT inventory list

- Handling server related issues through the ticket system, escalate to server supplier TAC and follow up accordingly.

- Replace parts for servers like mainboards, CPU, RAM, HDD/SSDs, network linecards / modules, transceivers and cables

Requirements:

- Diploma in Computer Science, Information Technology or related disciplines

- Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community.

- Troubleshooting & Problem-solving skills

- Ability to determine computer problems and to coordinate hardware, software, and/or network solutions.

- Ability to communicate technical guidance and instruction to users on the use of PC and/or mainframe applications and systems.

Capable of working in a fast paced environment

- Knowledge of a wide range of computer systems software, applications, hardware, networking, servers and communications.

- Familiar with data center environment is a PLUS

------------- Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com EA Registration Number: R22108564

Data provided is for recruitment purposes only Business Registration Number: 201735941W. Licence Number: 18S9037

• Position : Service Engineer - Up to $5,000 - Changi Business Park
• Location : Changi Business Park
• Working hours : 5 Days Work Week – Monday to Friday: 9.00 AM to 5.30 PM
• Salary (commensurate with experience) : Up to $5,000 + Transport Allowance + AWS + Performance Bonus + 14 Days Annual Leave + Medical and Dental benefits + Insurance
• Duration : Permanent
• Industry : Semi-Conductor Industry

Responsibilities:

• Prepare service and spare parts quotations to customers enquiries
• Performing service tasks like in-house repair and on-site commissioning for various gas and water quality analyzers, CEMS and AQMS.
• Troubleshooting analyzer & advising customers on the best solutions in accordance with standard procedures and safety guidelines of Company
• Creating and maintaining strong relationships with customers and providing good services support.
• Liaise and work with customers to address any service concerns and provide solution on the technical problems
• Support project team to perform Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) for project
• Identifying potential opportunities to get new preventive & maintenance contract
• Provide product training to end user and distributor
• Any other ad-hoc duties assigned

Requirements:

• Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)
• Must have knowledge on gas analyzers, CEMS and water quality analyzer
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Preferably possess own transport

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer/ Technician to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, disassembly or removal of fault component
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for wafer fab frontline semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Diploma/ Higher Nitec/ Nitec (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Fresh graduates are welcome to apply
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Knowledge on HVAC fundamentals (chillers, pumps, cooling towers, air handling units)
• Identify, design, and propose energy conservative measures (ECM) on the chilled water system which includes:

1. Instrumentations selection and design on the measurements and verifications (M&V) system (temperature sensors, flow meters, pressure sensors, weather stations, power meters)
2. Centrifugal water pumps energy optimizations strategy
3. Chillers energy optimizations strategy
4. Cooling tower energy optimizations strategy
5. Heat balance substantiating test

• Operating system efficiency (OSE) report preparation
• Documentation of the chiller system optimization design

We prefer full time interns who can commit at least 5 months between January 2025 to July 2025.

Remuneration: Basic + VB

Work location: Alexandra

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built
• documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Strong leadership with problem-solving skills. Strong understanding in structural design is highly advantageous
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Position: Service Technician/Engineer (Measurement/Instrument/Electronic)
• Location: Ang Mo Kio - Few bus stops from Ang Mo Kio MRT
• Working hours: 5 days work week, Monday to Friday 9.00am to 6.00pm
• Salary (commensurate with experience): Up to basic $4500 + $800-$1000 Transport allowance + 10 days Annual Leave + Variable Bonus + Phone Allowance
• Duration: Permanent
• Industry: Test & Measurement Equipment

Main Responsibilities:

• Provide technical support to customer.
• Perform Troubleshooting, Installation, commissioning, testing and repair of test & measuring instruments
• Assist in all sales and technical support activities.

Requirements:

• Minimum ITE Higher NITEC/Poly Diploma in Electrical & Electronic Engineering or equivalent
• Minimum 1-2 years related experience
• Candidate without experience is welcome to apply, full training provided
• PC Literate
• Bilingual in English and Mandarin to liaise with Chinese speaking clients who converse in Mandarin only

Email me at [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : Sales Engineer (Metrology) - Up to $4,800 Gross - Changi Business Park
• Location : Changi Business Park
• Working hours : 5 Days Work Week – Monday to Friday: 9.00 AM to 5.30 PM
• Salary (commensurate with experience) : Up to $4,000 + Transport Allowance + AWS + Performance Bonus + 14 Days Annual Leave + Medical and Dental benefits + Insurance
• Duration : Permanent
• Industry : Semi-Conductor Industry

Responsibilities:

• Identify and engage with potential customers to offer solutions for their semiconductor processes.
• Manage end-to-end sales processes, from lead generation to post-sale support.
• Collaborate with cross-functional teams globally and work closely with the technical and & teams to customize solutions that meet customer requirements.
• Support business development initiatives by identifying market trends and growth opportunities in the SEA region.
• Establishing new, and maintaining existing, relationships with customers
• Negotiating and closing sales by agreeing terms and conditions
• Offering after-sales support services
• Administering client accounts
• Analysing costs and sales
• Preparing weekly reports for management
• Meeting regular sales targets
• Recording and maintaining client contact data
• Supporting marketing by attending trade shows, conferences and other marketing events
• Making technical presentations and demonstrating how a product will meet client needs
• Providing pre-sales technical assistance and product education
• Supporting sales manager in data analysis and sales presentation
• Any other ad-hoc duties assigned

Requirements:

• Degree in Chemical Engineering/Materials Science/Physics, or a related field
• Minimum 2 years of experience in solution sales, preferably in the metrology industry or scientific industry
• Understanding of semiconductor processes especially for laboratory equipment use for failure analysis, quality control and metrology equipment for thin film.
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Preferably possess own transport
• Able to do after office hour support
• No Experience welcome too, training will be provided!

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Remuneration: Basic & VB + $800 Flexi Dollars + 3 month performance bonus

Work location: Pioneer

Working hours: Mon - Fri, 8:30am - 5:30pm

Job Description:

• Manage daily operation activities in workshop and customer service
• Ensure the performance and reliability of XSQUARE’s fleet of AGVs
• Respond and provide technical guidance to customers regarding operational issues, software updates, general maintenance etc
• Ensure accountability and integrity operational readiness of workshop
• Develop all necessary policies and procedures to ensure the workshop is effectively maintained to ensure maximum efficiency
• Ensure staff are appropriately trained and motivated to carry out their responsibility to the required standards
• Deal openly and promptly with any problems and effectively identify and manage risk as appropriate
• Constantly review and streamline workflow and working conditions in order to achieve labor turnover and efficient operation
• To ensure all works are carried out in accordance with the safety and housekeeping requirements set by the company
• Provide the point of escalation for team for any operational issues
• Act as a bridge between sales, operations & customers
• Write technical report and submit to customer/manufacturer
• Preparation of reports on performance, budget and expenditure
• Plan and achieve financial budget and key performance indicators

Job Requirements:

• At least 3 years above experience in Industrial Robotics (AGV / Forklifts etc.)
• Candidates with experience from Robotics companies: strobo, hope technik, rockwell automation, omron, swisslog, would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Assist engineers in the installation and hook-up of new equipment
• Perform task with zero error
• Prepare consumables/preventive maintenance parts to ensure adequate provision
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Assist in implementing process improvement projects
• Ensure good housekeeping and safety practices in the Fab
• Safe custody of tools, equipment and other properties belonging to the Module
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy

Requirements:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills
• Able to perform 12-hour rotating shift

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Job Summary:

We are currently looking for a Senior Security Project Engineer to join our Professional Services Team delivering Security Projects encompassing predominantly NAC, Firewall, PS and MFA solutions. Qualified candidate is expected to have hands-on experience in delivering such solutions. This role presents itself with considerable learning opportunities on the state-of-the art security technologies.

Accountabilities:

• Develop low level design document for the project delivery detailing the scope with the sensible technology write up.
• Participate in Internal/Customer meetings to develop the LLD document.
• In-depth technical knowledge and good working experience in implementing and supporting Cisco ISE and HPE Aruba ClearPass NAC solutions.
• Prepare UAT document and perform UAT as per document.
• Understanding of Windows Active Directory and Integration with NAC Solutions
• Proficient with hands-on experience delivering Firewall migrations and fine-tuning Firewall/IPS policies.
• Ability to deliver MFA Solutions for specific use case requirements.
• Assist in reviewing Technical Design Specifications (TDS) document for security projects
• Proactively participate in maintaining internal knowledgebase sharing technical findings within the Team.

The Individual and their Experience:

• Network Access Control (dot1x) experience of Cisco ISE and HPE Aruba ClearPass (Mandatory).
• Firewall Migration expertise across multi-vendor platforms- Cisco ASA/FTD, Palo Alto, Fortigate, Checkpoint.
• Hands on experience Cisco FirePower NGIPS.
• Basic understanding of Networking – Routing and Switching Protocols.
• Ability to manage medium to large size project and ensure completion within the projected timeline.
• Build customer relationship to manage the projects in a congenial way.
• Team Player highly spirited, sharing project experience with peers.
• Able to learn and adopt new skills when projects warrant based on the relevant training provided.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

Key Responsibilities:

Design & Development:

Assist in designing, developing, and testing electronic circuits and systems.

Support PCB (Printed Circuit Board) design, layout, and testing.

Assist in developing prototypes and performing hardware debugging and troubleshooting.

Software Development & Embedded Systems:

Collaborate on developing embedded software for microprocessors and other embedded systems.

Assist in the integration of hardware and software components for electronic systems.

Support programming tasks using C, C++, or Python in embedded environments.

Testing & Evaluation:

Assist with hardware and software testing, verification, and validation of electronic devices.

Document test results and work with engineers to identify areas for improvement.

Research & Development:

Contribute to the research of new technologies and innovations in electronics and computer engineering.

Support the team in evaluating new components, tools, and methodologies.

Collaboration & Reporting:

Collaborate closely with engineers, software developers, and product teams to meet project requirements and deadlines.

Prepare technical documentation and reports for internal review.

Qualifications:

Currently pursuing a Diploma or Bachelor’s or degree in Electronic Engineering, Computer Engineering, Electrical Engineering, or related field.

Strong knowledge of electronic circuit design, digital systems, and embedded systems.

Proficiency in programming languages such as C, C++, and Python.

Basic understanding of microprocessors, and FPGA-based systems is a plus.

Ability to work independently as well as collaboratively in a fast-paced environment.

Strong problem-solving skills, attention to detail, and excellent communication skills.

Preferred Skills & Experience:

Experience with hardware/software co-design and integration.

Familiarity with debugging tools such as oscilloscopes, logic analyzers, and multi-meters.

Knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).

Understanding of machine learning and AI applications in embedded systems (a plus).

What We Offer:

Mentorship from experienced engineers.

Opportunity to work on impactful, real-world projects.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production.
• Perform scheduled equipment preventive maintenance (PM), calibration, troubleshooting and monitoring of equipment-related problems on a timely basis to minimize equipment downtime.
• Assist engineers in the installation and hook-up of new equipment.
• Perform task with zero error.
• Prepare consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives.
• Assist in implementing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy.

More about you:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Experience in TRACK ACT8/Mark8
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Job Summary

The Senior Network Operations Engineer is an Operations role whom will focus on SLA driven Level 3 Incident Management which encompasses responding and resolution of Network, Wireless, Security Infra related issues. The position will be a critical member of the Operations team whom are the higher level and Sev 1 n 2 escalations to diagnose and troubleshoot fault incidents. This role will work directly with customers to gather the fault symptoms and provide the resolution or work around and share best practices, make recommendations, document the issues, provide root cause incident reports. The job scope includes extensive support to client network support team to perform activities in network health check, wireless testing, user issues, break fix, preparing Incident root cause reports.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Field engineer responsible for handling support issues on Enterprise Networking Platforms and Solutions related to Routing, Switching, Wireless, NAC, Security. Includes Vendors such as Cisco / Aruba / Fortinet / Riverbed / Palo Alto / F5 etc
• Under take escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 3 on site troubleshooting and hardware field replacement works for Enterprise Networking Solutions.
• Be part of a team of engineers that performs 24 hours standby duties on a rotational basis.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you
• Work closely with various team of engineers for troubleshooting in relation to Enterprise Networking incidents.

Qualifications:

• Minimum 5 years of relevant experiences in network operations including network, wireless, security technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA/CCNP/CCIE certified plus any other networking certifications preferred
• Strong understanding about Enterprise Networking Solutions such as VSS,
• VPC, Multicast , MPLS etc..
• Ability in performing local / remote IOS upgrades on different products and RMAs for faulty devices in production

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf