Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

About Us:

We develop comprehensive software products and solutions ranging from IT consultancy to infrastructure and hardware setup to optimise customers' experiences. To establish ourselves as a leading provider of applications and healthcare support services for the Asian market, and partner healthcare customers to build a safe medical environment for all.

We are driven by our group philosophy as defined below:

1. Provide the best to our customers through a service-oriented culture

2. Create new value through innovation

3. Realise greater possibilities through advanced technology

Roles and Responsibilities:

• Responsible for providing technical assistance and support related to computer systems, hardware or software testing
• Responds to queries, runs diagnostic programs, isolates problem, and determines and implements solution
• Provide technical assistance and support for incoming queries and issues related to computer, systems, software, and hardware
• Respond to queries either in person or over the phone
• Write training manuals
• Maintain daily performance of computer systems
• Respond to email messages for customers seeking help
• Ask questions to determine nature of problem
• Walk customer through problem-solving process
• Install, modify, and repair computer hardware and software
• Run diagnostic programs to resolve problems
• Are required to apply information security in accordance with the established policies and procedures of the organization.

Requirements:

• Diploma or Certificate in IT/Computer Engineering with 1-2 years of working experience in technical support
• Experience in basic networking support
• Experience in supporting OS platforms such as Windows 10 and MS Office applications
• Prefer candidates who are resourceful, good working attitude & takes initiative
• Good communication skills and administrative skills

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

Job Summary:

The Applications Support Engineer provides technical support and maintenance for software applications, ensuring their optimal performance and availability. This role involves troubleshooting issues, implementing solutions, and collaborating with other IT teams to enhance system functionality. The Applications Support Engineer is also responsible for documenting processes, managing application configurations, and assisting in the deployment of software updates and patches.

Key Responsibilities:

• Application Support: diagnose and troubleshoot application issues reported by end-users or detected through monitoring tools. Provide timely and effective resolution to application problems, escalating issues when necessary.
  
• Incident and Problem Management: manage and resolve application-related incidents and problems, ensuring root causes are identified and addressed. Maintain an incident log and provide regular updates to stakeholders on the status of issues.
  
• Application Maintenance and Updates: work with development teams to deploy new versions and patches of applications and implement changes. Test and validate updates before deployment to ensure minimal disruption to users.
  
• User Support and Training: assist end-users with application-related queries and provide technical support. Conduct training sessions for users on new features or changes to applications. Develop user guides and support documentation to assist end-users.
  
• Configuration Management: manage application configurations, including settings, permissions, and access controls. Ensure that application configurations are documented and maintained in line with organizational standards.
  
• Collaboration and Communication: work closely with developers, system administrators, and other IT teams to resolve application issues. Communicate effectively with stakeholders, providing regular updates on application status and issues. Participate in project meetings to provide input on application support requirements.
  
• Continuous Improvement: identify areas for improvement in application performance and user experience. Propose and implement solutions to enhance application efficiency and reliability.
  

Requirements:

• Degree in Computer Science, Information Technology, or related field.
• Preferably 2 to 5 years of experience in application support, software troubleshooting, or a related role.
• Beneficial to have experience in an Aircraft Engine Maintenance Repair and Overhaul shop.
• Good knowledge of MS Excel, databases, SQL, and scripting languages (e.g., Python, PowerShell).
• Strong problem-solving and analytical skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Strong customer service orientation.
• Training provided for candidate without prior experience.

JOB SCOPES & JOB RESPONSIBILITIES

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programme.
• Liaise with Professional Engineer on civil related works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handling of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.
• Good attitude and relevant working experience.

JOB REQUIREMENTS

• Recognised Certificate in Civil Engineering.
• Minimum 5 Years experience in the construction site.
• Independent with good communication skills.
• Good organizational and planning skills.
• Effective communication and coordination skills and teamwork.
• Able to work independently and in a team.

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Responsibilities

●Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how company's Robotics solutions can address those needs.
● Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of our robotics solutions.
● Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.
● Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.
● Create technical proposals and documentation tailored to customer requirements.
● Develop a deep understanding of company's Robotics' products and stay up-to-date with the latest advancements in the field.
● Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.
● Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.
● Provide feedback to our product development team based on customer needs and market trends.
● Excellent presentation and communication skills.
● Ability to understand and address customer requirements and translate them into technical solution

Requirements:

● Degree with a focus on robotics, mechatronics, or related fields. Background in Computer Science/Electrical Engineering/Mechanical Engineering can be considered as well.
● Strong technical knowledge in their domain and the ability to work with customers.
● Should have at least one of the following:
○ Experience in Python or Javascript or C++. (or)
○ Experience in CAD software such as SolidWorks. (or)
○ Experience in mechatronics design such as working with Arduino or custom PCBs.

Plus Qualifications (Good to have)
● Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).
● Familiarity with Docker, Jenkins, and other deployment tools.
● Exposure to backend system design to support robotics applications.
● Previous experience in a presales or technical sales role.
● Participation in robotics-related hackathons or competitions.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

As a Non-Volatile Memory Quality & Reliability Assurance (NVM QRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analysis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., Product Engineering, Product Yield Enhancement) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode.
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

Key Responsibilities:

• System Development, Implementation and Support
• Evaluate requirements and analyze impact to the application
• Involve in design and development stage
• Involve in application setup and deployment
• Provide guidance towards testing phases
• Provide level 3 production support to relevant open systems applications 
• Coordinate with internal teams and vendors to resolve application and system issues
• Execute tasks related to project / change request / maintenance request

Key Requirements:

• Degree in Computer Science or equivalent
• 5 years of UNIX/LINUX/SQL/Korn Shell programming experience
• Hands-on experience on Oracle database, Webserver such as Apache, Java platform / J2EE and Java web container such as WebLogic, JBoss EAP, Tomcat
• Relevant working experience with good working knowledge in cards, loyalty, remote commerce, portals or digital payment domains.
• A good understanding of API frameworks will also be desired.
• Ability to multi-task and perform well under pressure

- Respond to network appliances connectivity issues and resolve any issues within the confines of the office.

- Collaborate with partners and service vendors to ensure that the proxy, firewalls, and network appliances stay operational.

- Responsible for configuration and maintaining Routers, Switches, Firewalls, Proxy/Web Isolation, Load-Balancer and Security Patches for equipment.

- Troubleshoot, provide resolution and raising tickets when networking equipment face issues.

- Create, maintain, and update documentation as it relates to configuration, process, and service records.

- Monitoring security measures for the protection of computer systems, networks, and information

- Responsible for providing customer support in solving all phases of complex information security related technical problems.

- Reviews and recommends information security solutions to customer problems based on an understanding of products/systems test results.

Key Requirements

- L2: 3 to 5 years’ experience in Network Infra Setup and Operations and at least 3 to 5 full delivery cycle implementations of relevant projects

- Required to work on wee hours, weekends, and public holidays.

- Knowledge of routing, switching, firewall, proxy/web isolation and data center operation.

- Able to work well in a team environment and use tools like Visio and Wireshark.

Job Summary:

Drives the design chain value proposition by generating the greatest number of Xilinx design wins in technologies and registrations for customers engaged in Xilinx based product design resulting in growing business. Interface with the engineering departments of customers and suppliers. Performs a variety of product, technical and engineering functions including but not limited to: pre/post sales support, research, design and development.

Principal Responsibilities:

• Work with sales to explore new customer base which use Xilinx products.
• Deliver technical solutions / proposals and provide product presentations to customers.
• Provide technical support to customer which are using Xilinx products from start of development to design win closure.
• Provide technical training to customers
• conduct seminars and workshops
• Willing to travel
• Must be proactive and constantly striving to keep abreast of latest advances in Xilinx technology.

Job Level Specifications:

• Must be highly motivated and able to work independently
• Strong interpersonal and communication skills.
• Good team player
• Good analytic and problem-solving skills
• Integrity & Trust
• Excellent in time management.

Work Experience:

• Minimum 3+ years work experience in Programmable Logic based design / ASIC / Processors / GPU
• Proficient in VHDL/Verilog/C++ programming
• Experience working on AI solutions development using Caffe, Tensorflow, Keras, Pytorch frameworks is a strong plus.
• Experience working on systems in one or more of the following areas is a highly desired: Software Defined Radios, Wireless Communication Systems, Artificial Intelligence,.

Education and Certification(s):

• Bachelor's or Masters Degree in Engineering or equivalent.

Job Responsibilities:

• Over-all project management, which includes planning and implementation of assigned projects

• Planning and monitoring of progress and timely completion of projects which includes preparation of detailed progress and status reports

• Coordination with clients & consultants to ensure smooth communication

• Directly reports to the Project Manager

• Preparation of samples according to the requirements of the project

• Ensuring smooth procurement process and timely deliveries, which includes preparation of status reports

• Coordination of deliveries on site

• Issuance delivery orders

• Attending site meetings for smooth coordination

Requirements:

• Minimum Diploma in Electrical/Electronic/Microelectronic/Mechatronic/Green Building & Sustainable or related engineering diploma.

• Minimum 1 year of experience in engineering field

• Computer knowledge in Auto CAD will be added advantage.

• Ability to plan & monitor project progress to ensure timely completion

• Ability to communicate with clients & consultants · Willingness to learn & improve personal skills through team work

• Knowledge in basic project management e.g. preparing monthly project reports, site planning, monitoring & control processes and project risk analyses.

• Good work ethics and team player

• Knowledge in lighting technology and lighting design or electrical engineering fields

• Able to start work immediately

Summary:

• Basic up to 6k +
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

SOFTWARE ENGINEER (AGV)

Company Background:

One of Asia Pacific's market leader in intelligent warehousing solutions.

Location: West (Benoi)

Working Hours: 5 Days Work Week (Mon-Fri - 8.30am to 5.30pm)

Benefits:

• Basic up to S$ 6000
• Performance Bonus (~3 months)
• Flexi Dollars S$ 800

Responsibilities:

Incumbent will be in charge of mainly 3 entities

• To develop and maintain Warehouse Control System (WCS) application.
• Development of REST API endpoints for interfacing with external and internal stakeholders
• Design and documentation of REST APIs
• Development of REST API interfaces and implementing REST API logic
• Database integrations for persisting REST API data
• Testing of REST APIs
• Development of internal APIs for interfacing with internal components
• Writing documentation for internal API interfaces
• Development of internal API interfaces and implementing internal API logic
• Testing of internal APIs
• Assist with software deployment and testing in customer site.
• Supporting deployment of WCS system on customer’s premises
• Handling integrations with additional systems
• Deployment and testing of the system
• Involve in DevOps related tasks

Job Requirements:

• Minimum Bachelor's Degree in computer science, computer engineering, information technology or a and relevant practical experience
• Software skills required: Python, Docker, Git, REST API

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

# Risk Management & Project Management

# Network Migrations - LAN & WAN, Network security

# Experience in Data Centre Project

Job Description:

• Plan and execute data centre migration
• Oversee procurement of new servers and network equipment
• Manage data migration and verification processes
• Set up new Server Room compliant with Green Book standard
• Other ad-hoc tasks assigned
• 
  
• Diploma/Degree Holder and above
• At least 5 years of experience of handling ICT projects such as DC relocation etc
• Relevant IT certifications (eg. ITIL, CISSP, PMP) preferred

Send your cv to [email protected]

As an Manufacturing Central Team Assembly and Test Automation Project Engineer Automation Project Engineer, you are member of the Global Operations Team responsible for the worldwide portfolio of Automation projects aligned to Assembly and Test Operations objectives and corporate strategies and initiatives. You will develop, facilitate, and/or lead data-driven program management capabilities during Initiation, planning, and execution phases. You will identify risks early, manage issues, and drive initiatives to closure.

Job Responsibilities

• Collaborate with network teams - site automation, central/ site Process and Equipment Engineering, procurement, safety EHS in managing the automation projects
• Identify Project partners and manage expectations
• Identify and manage program projects dependencies
• Collect and document partner requirements
• Identify and resolve issues and conflicts
• Control project scope
• Communicate project expectations to team members and partners
• Coach, mentor, motivate, supervise, and provide recognition for projects
• Maintain project support through interaction with senior leaders
• Promote Program Management value and business practices to the organization
• Develop and deliver progress reports, proposals, requirements documentation, and presentations
• Identify potential crises, and develop and implement resolution plans
• Facilitate transition of system and business processes from project closure to long term sustainment
• Follows Company/Department Policies and Group expectations.
• Maintains a clean and safe working environment by proactively assessing the work (and surrounding) area and submitting work orders as needed.
• Recognizes and reacts to safety alarms (EES, fire alarm, MDA, etc.)
  Remains within Micron’s attendance policy.
• Displays a positive attitude toward Micron and its policies
  Holds self and other team members accountable for adherence to all company-wide safety procedures (PPE, EIPS).
• Observe all established EHS policies, requirements, and procedures.
• Understand and follow EHS guidelines included in work instructions.

Requirements:

- Bachelor's in Engineering or Science in fields such as mechanical, electrical, industrial, computer or automation.

- Minimum 3 years working experience in engineering semiconductor project management field

- Strong verbal and written communication skills

- Capability to lead teams and manage project team members

- Project Management Certifications are preferred

- Knowledge in automation, semiconductor process and systems are beneficial

- Experiences in supporting and leading global teams/projects

As a Metrology/ Real-Time Defect Analysis (RDA) Engineer in MSB, you have the opportunity to work with a multi-functional team from different areas of the plant/ process areas to understand their tools and processes so as to create measurement recipes that can provide quick and accurate feedback on the product integrity, thus ensuring quality output. As technology advances, you will be constantly challenged with the need to innovate for newer, faster and better modes of monitoring. You will collaborate closely with vendors to explore best known methods to maintain high tool performance and embark on possible ways of cost reduction to ensure our product retains its competitiveness in the market. Additionally, you are required to work in both clean/non-clean room environment

Enable production Metro/RDA needs.

• Provide first level of support for engineering requests, recipe maintenance, tool recovery and basic troubleshooting of tool issues
• Set daily priorities and enable efficient communication.
• Schedule and perform preventive maintenance on assigned tool sets
• Ensure all Special Work Requests (SWRs) are processed correctly and in a timely manner
• Optimize tool maintenance schedules and utilization
• Resolve sampling strategy to meet business requirement

Ensure all Metro/RDA tool meet measurement and inspection standards.

• Set up tool qualification criteria, implement, supervising through SPC.
• Make decisions on how to address tools and products that are out of control for established SPC rules for both process and defect related issues
• Develop and handle projects designed to reduce cost, reduce tool measurement variability, improve availability, and find solutions to ongoing problems
• Partner with Process, Equipment Owners and vendors for equipment upgrades/enhancements to improve tool performance
• Perform periodic assessment, tool-to-tool matching and GR&R, etc. to ensure tool measurement accuracy.
• Evaluation and enable next generation tool to close metrology gaps.
• Partner with the metrology/inspection tool vendors to develop new hardware, software, and technologies.
• Perform tool evaluation and buy-off

Seek and drive methodology breakthrough to improve efficiency in metro/RDA function.

• Drive process improvement through new recipe creation that helps to provide accurate and faster feedback to the line, thereby improving the confidence level of the product.
• Participate in world-wide discussions for continuous improvement on the toolset(s) assigned across Micron sites.
• Set up processes, design and implement process monitoring, control methodologies.
• Establish business process standards, specifications and documents.
• Work with peer groups to test and vet new or continuously improve the Reaction Mechanisms and Procedures based on feedback from the end users.
• Write and publish reports that summarize projects, detection capability improvements, manufacturing productivity and cost reduction work.

Requirements:

• Bachelors in engineering/science/Statistics
• More than 2 years’ experience in Metrology/RDA in Semiconductor industry
• Knowledge of semiconductor Metrology/RDA equipment and understanding of Statistical Process Control (SPC), process control and its reaction mechanism
• Strong problem solving and critical thinking skills and able to identify root causes
• Ability to facilitate meetings and achieve cross area engagement /empower a group of people toward a common goal / work and lead team project.
• Good documentation skills with strong attention to details
• Validated strong analytical and data summary skills
• Experience in MSA (Measurement System Analysis) is an added advantage
• Experience in Python and Tableau is an added advantage
• Good communication skills

Keen on the role? Apply now!

Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers’ technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. Defines and writes preventative maintenance schedules.

Summary:

• Basic up to 6k
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem areas

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem areas

Job Description

Program Management and Customer Interface

Act as the main point of contact for Key Account Customer(s), managing all technical communications, status updates, and program-related inquiries.Define project scope, objectives, and success metrics in close collaboration with K&S and align cross-functional teams within Akribis Systems to meet these objectives.Develop, track, and manage detailed project plans, timelines, and milestones, ensuring transparency and accountability throughout the project lifecycle.

New Product Introduction (NPI)

Lead new product introduction projects for K&S, coordinating closely with engineering, production, quality assurance, and supply chain teams to ensure on-time and on-spec delivery.Collaborate with K&S on design specifications and performance requirements, ensuring that Akribis meets the technical and operational needs of the customer.Identify and mitigate project risks, ensuring potential issues are proactively addressed to minimize impact on project timelines and quality.

Engineering Change Management (ECM)

Oversee engineering change management (ECM) processes for Key Account Customer(s)' projects, ensuring all modifications are smoothly integrated and communicated to relevant stakeholders. Coordinate with production, quality, and supply chain teams to ensure seamless implementation of engineering changes and compliance with customer requirements.Document and track engineering changes, ensuring alignment with both Akribis’s standards and Key Account Customer(s)’s requirements.

Technical Alignment and Decision Making

Facilitate technical discussions between Akribis and Key Account Customer(s), ensuring all stakeholders understand project requirements, objectives, and progress.Serve as a technical advisor to internal teams, aligning customer requirements with Akribis’s capabilities and solutions.Drive decision-making processes related to technical aspects, balancing customer requirements with feasibility, cost, and quality.

Continuous Improvement and Process Optimization

Identify areas for process improvement and implement changes to enhance project efficiency, product quality, and cost-effectiveness.Utilize feedback from Key Account Customer(s) and internal stakeholders to continuously refine program processes and customer engagement strategies.Implement metrics to monitor program performance, analyzing data to identify trends, address issues, and support strategic goals.

Documentation and Reporting

Develop and maintain detailed documentation of project plans, schedules, risk assessments, and change orders for full transparency and traceability. Provide regular reports, updates, and technical reviews to Key Account Customer(s) and Akribis leadership, ensuring all parties have a clear understanding of project status.Maintain organized and accessible project documentation to support quality audits, compliance, and future reference.

Qualifications

• Bachelor’s degree in Engineering, Program Management, or a related technical field;
• Master’s degree is preferred.
• Minimum of 5 years in technical program management, project management, or engineering, preferably within semiconductor or precision engineering industries.

Other Information

Skillset(s) Requirement:

Technical Skills:

Strong understanding of project management methodologies (Agile, Waterfall) and proficiency in ERP/PLM systems.Experience managing complex technical programs, including new product introductions and engineering change management.Familiarity with technical drawings, engineering specifications, and quality control standards.

Customer Management Skills:

Demonstrated experience building and managing key customer relationships, with a focus on aligning deliverables to customer expectations.Analytical Skills: Strong problem-solving skills, with the ability to analyze program performance data and drive continuous improvement.

Communication Skills:

Excellent verbal and written communication skills to interact effectively with cross-functional teams and customers.

Organizational Skills:

Strong organizational skills, with a proven ability to prioritize and manage multiple projects simultaneously. Preferred Skills and CompetenciesPMP or Program Management certification is a plus.Experience in Lean, Six Sigma, or other continuous improvement methodologies.Familiarity with the semiconductor industry and engineering change management processes.Proficiency in project management software (e.g., SmartSheet,Microsoft Project, Jira) and ERP systems (e.g., SAP).