Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team & Resident Engineer on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To attend site, progress, variation and coordination meetings
• To coordinate with Resident Engineer with respect to C&S engineering works, architectural and M&E engineering works
• Period: 36 months
• Start from: December 2024

Requirement:

• Min Diploma in Civil Engineering, Construction Engineering, Architectural or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

About Us!

The mission of Housing & Development Board (HDB) is to provide affordable, quality housing and a great living environment where communities thrive. To achieve its mission, HDB aims to be data-driven to the core and adopt evidence-based decision making in developing better housing policies service, improving service delivery and optimising operations.

What Will You Do?

As a data engineer, you will play a key part in helping HDB begin its journey to be data-driven to the core. In this role, you will assume the following responsibilities:

• Create and maintain data architectures that meets the needs of HDB.

• Build and maintain data platforms required for storage, extraction, transformation, and loading of data from a wide variety of data sources.

• Improve discoverability and distribution of analytical data to data analysts and data scientists.

• Implement best practices in data security throughout the lifecycle of analytical data.

You will be a Great Fit if you:

• Background in Information Systems (IS), Computer Science or related field in a reputed institution.

• 3 years relevant experience in designing and maintaining data platforms such as data lakes, data warehouses and the associated data pipelines is preferred.

• Proficient in creating and maintaining complex data pipelines using tools such as Microsoft SQL Server Integration Services (SSIS).

• Knowledge of data platforms such as Spark, Flink, Kafka, SQL and NoSQL databases, Airflow

• Knowledge of the latest developments in data engineering and best practices in data management.

• Knowledge of analytical tools is an advantage e.g., SAS Viya, Tableau, PowerBI, Amazon SageMaker, ArcGIS Pro

• Knowledge in cloud computing, design and development is an advantage e.g., AWS, Azure, GCP

• Knowledge of cloud technologies in data platforms is a plus e.g. Snowflake, AWS Redshift, Google BigQuery, Azure Synapse.

• Strong project management and organization skills.

• Possess an eagerness to learn and impart new skills.

• Be a good team player.

Good to Have:

- Great Attitude to bring the best out our team

- Team Player; we work together as a team

- Possess an eagerness to learn and impart new skills

- Autonomous & Take ownership

Fresh graduates are welcomed.

Successful candidates will be offered a 1+1 year contract in the first instance. Conversion to perm is dependent on good performance.

Find out more about a career with HDB at www.hdb.gov.sg/cs/infoweb/about-us/careers

Please apply for the job through the Careers@Gov job portal as linked:

https://www.careers.hrp.gov.sg/sap/bc/ui5_ui5/sap/ZGERCFA004/index.html#/JobDescription/15360615/bd622d52-6b55-1eef-acdd-9a6efdfa2206

Responsibilities:

• Setting up of AOI machines.
• Machine alignment, teaching and testing.
• Ensure machine meet customer specifications.
• Able to do machine troubleshooting

Requirements:

• NITEC or Higher NITEC, Diploma in Mechanical or Electrical Engineering.
• With minimum 3 years of experience in the semiconductor industry.
• Experience in automation industry.

Summary:

We are seeking an NLP engineer with a minimum of 2 years of hands-on experience in NLP solution development, particularly in NLP solutioning design, development and deployment. The role involves applying NLP knowledge to develop Gen Al solutions, leverage on machine learning framework, not limited to Tensorflow, Py-torch, etc.... Responsibilities include designing, developing, and deploying NLP solutions using cutting-edge techniques and technologies in cloud or on-premises environments. Participating in code reviews, architecture discussions, team meetings, and creating comprehensive documentation is expected. The ideal candidate should have a proven ability in statistical analysis, deep learning methods, understanding of generative Al methods and text representation techniques. Besides technical abilities, the candidate should consistently deliver highquality projects, exhibit strong communication skills, and a strong work ethic focused on pursuingthe best solutions efficiently.

Responsibilities:

• Work closely with subject matter experts to incorporate NLP components into existing systems and applications.
• Conduct independent research to refine and enhance product evaluation suites, ensuring accurate measurement of model and product performance.
• Engage in various data engineering tasks, including data collection, preprocessing, quality control, and augmentation, to curate high-quality datasets essential for model training.
• Assess and compare different NLP techniques and tools to pinpoint the most effective approach for specific tasks.
• Execute thorough testing and validation procedures on NLP models to guarantee their resilience and dependability.
• Optionally, possess experience in designing resilient frameworks and devising solutions for intricate challenges.
• Demonstrate an analytical mindset with adept problem-solving skills.
• Keep abreast of the latest advancements in NLP techniques and methodologies, actively experimenting with novel models and approaches to maintain our competitive advantage.
• Exhibit a strong drive to deliver optimal solutions within tight timelines.
• Comprehensive documentation of technical specifications, architectural designs, and best practices.

Qualifications:

• Master or bachelor degree in computer science, Al / Machine Learning or relation field.
• Minimum 2 years of hands-on experience in Gen Al solution development specific in NLP applications, e.g., Agentic Al, RAG, NER, JER, prompt engineering, etc.
• Strong understanding of NLP fundamentals, algorithms, and techniques.
• Proficiency in Python and relevant NLP libraries (e.g., NLTK, spaCy, Gensim, LangGraph, Llamalndex, etc... ).
• Proficiency in relevant GenAI frameworks (e.g., LangChain, Llamaindex, Llama¬ factory, etc...)
• Experience with machine learning frameworks (TensorFLow, PyTorch, Hugging Face)
• Excellent problem-solving, communication, and teamwork skills.
• Experience with specific NLP tasks such as text classification, named entity recognition, sentiment analysis, or question answering.
• Knowledge of natural language understanding (NLU) and natural language generation (NLG).
• Experience with productionizing NLP models and addressing real-world challenges.

We are committed to fostering a collaborative and inclusive work environment where innovation and creativity thrive. If you are passionate about NLP and have the skills to make a significant impact, we encourage you to apply.

Asst Project Engineer

• To assist the Senior Project Engineer/Project Manager to conduct kick-off, pre-project/project meetings to ensure team members is clear on the objectives, deliverable, Quality, equipment’s Lead-time, Safety and construction requirements.
• Plan and assist the Senior Engineer to monitor the daily progress of activities to achieve on or before schedule, i.e., by comparing the planned vs actual progress status, identify critical activities.
• Preparation of engineering documents, such as inspection form, testing form and progress reports, updating of completion status.
• Together with the project team prepare the statement/work procedures, RA to specify the detailed work step required for the specific task of the job to be done and identify key risk with the associate risk. A risk mitigation strategy is applied with the whole project construction task.
• Calculate and tracking usage of resources, such as materials and tools with report prognosis to the Senior Project Engineer/Project Manager.
• Understand and evaluate the project requirements and project plans particularly, materials, schedule, equipment and labour loading.
• Assist the Senior Engineer/construction superintendent in assigning tasks to work teams.
• To explain the site situation, technical requirements, project specifications, special engineering requirements, coordination procedures, execution approach and activities priorities to the various work teams to seek contributions for further refinement.
• Ensure that various disciplines (including quality and safety personnel) are carrying out each tasks and tests/inspection in accordance with specification and standards as per the contractual requirements.
• Assist in resolving engineering issues at site, coordinating with the respective engineering support units, if necessary report discrepancy (if any) on labour status, equipment, materials etc. to the Senior Project Engineer/Project Manager.
• Preparation of project close-out report for the Senior Project Engineer/Project Manager to review before submission to clients.
• Ensure final acceptance of the project by client in accordance with contractual requirements

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• 3+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.
• Strong analytical and problem-solving skills with attention to detail.
• Excellent communication and teamwork abilities.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

As a Process Development Engineer, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

• Excellent execution on assembly process for 1st New Product Introduction (NPI) success and smooth transfer process from NPI to HVM
• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with cross functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and utilize key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:-

• Masters or Bachelor's degree in Mechanical/ Materials Engineering
• Experience in backend engineering process or package development preferred
• Good technical knowledge in component test and/or module manufacturing process
• Excellent data analysis, statistical analysis, data interpretation skills
• Ability to make sound data-driven decisions. Prioritize and apply due-diligence in day to day task.
• Possess analytical and problem solving skills
• Keen interest in semiconductor engineering
• Showcase leadership experience and potential

Roles & Responsibilities

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

Job Responsibilities:-

• Define, architect and document the Design-for-Testability (DFT) concept for SOC’s
• Develop, implement and verify DFT measures
• Work closely with cross-function teams (design/verification, physical, and operation) to ensure all test requirements are met and DFT function is correctly implemented for effective DFT solutions
• Achieve target structural test coverage for logic, memories, serdeses and other mixed signal IPs
• Test pattern generation/verification/post-silicon ATE support

Job Requirements:-

• Master's or Bachelor Degree in Electronics and Communications Engineering or equivalent
• Minimum 10 years of working experience in DFT field
• Good knowledge in Boundary Scan, ATPG Scan, Synopsys SMS and/or MBIST is a must
• Working experience in industry standard tools like Test Kompress, DFT advisor, DFT Compiler, Mentor’s SSN and OCC controller are desirable
• Knowledge of full VLSI RTL2GDSII design flow
• Knowledge in high level programming and script writing
• Knowledge in HDL, synthesis, static timing analysis and constraining will be an added advantage
• Some Experience in Test development and Product engineering

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical/Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Working Location: Buona Vista

Working Time: 5 day work week, 8:45am - 5:30pm

Job Description

● Utilise 3D CAD design tools and perform high precision 3D printing (FDM

& DLP)

● Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32

to build simple circuit boards for sensor control and data acquisition

● Testing and assembly of electronics and mechanical parts and debugging

of software using basic tools like python or C++

● Familiar with maintenance of laboratory inventory and laboratory

administrative tasks (Procurement, equipment preventive

maintenance/repairs and safety matters)

● Enthusiastic, highly motivated, able to multitask, with excellent

interpersonal and communication skills.

● Administrative works, such as ordering and payment with SAP system.

Job Requirements

● Basic experience in 3D CAD design software, like Solidworks and Fusion360.

● Basic experience with microcontroller boards like Arduino, Esp32, STM32.

● Basic experience in handling simple electronics and basic hands-on soldering skills

● Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

● Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei
EA Registered no.: R1543992
Recruit Now Singapore Pte Ltd
EA License no.: 21C0845

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering(PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 5-7 years of semiconductor fab experience in Chip package interaction and integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team-oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!