Job Description:

• Manage and perform engineering/design execution, planning, and interface and ensure that activities are completed on schedule and within the budget.
• Prepare project execution and quality plans, projects plan of works, initial projects safety review, initial projects environmental review, and project control system.
• Coordinate with project managers, discipline engineers, designers, drafters and field staff, and ensure consistency in execution of project activities.
• Organize and conduct project meetings, technical, and progress reviews.
• Initiate and complete projects close-out and archiving.
• Develops project objectives by reviewing project proposals and plans; conferring with management.
• Determines project responsibilities by identifying project phases and elements; assigning personnel to phases and elements; reviewing bids from contractors.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Confirms product performance by designing and conducting tests.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.
• Controls project costs by approving expenditures; administering contractor contracts.
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations.
• Maintains project data base by writing computer programs; entering and backing up data.
• Ad- hoc duties assigned

Requirements

• Degree in Civil / Structural Engineering recognised by the Professional Engineer Board
• At least 3 - 5 year(s) of relevant experiences in construction industry
• Knowledge of Autocad would be an advantage
• Good communicative skills, able to interact with people of all levels and teamwork
• 5.5 days work week

JOB SCOPE & JOB RESPONSIBITIES

• Prepare submission and approval of documentation
• Prepare RFQ, evaluate and recommend purchases
• Coordinate with Customer, Consultant and Inter-department
• Tracking progress and prepare reports

JOB REQUIREMENT

• Degree with Mechanical / Electrical / Chemical / Environmental

Job Description

• Testing: Setup controllers with motors. Tune the system and perform functionality tests for new functions and features.
• Debugging: Replicating issues that customers face and liaising with R&D to report bugs.
• Advanced Debugging: Looking into the code base to find the bug, and test a fix.
• Feature Development: Customize features for specific use cases.
• Electrical Design: Adhoc designing of interface cables, drawing electrical diagrams. (No pre-requisites for electrical knowledge required)

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 3 Year(s) of working experience in Motion Controls, High precision, Semiconductor, Machine building, Manufacturing.
• Dealt with applications project, delivery to customers, facing with customer and deadline pressure.
• Ability to apply critical thinking to solve a vast spectrum of potential issues.

Other Information

Skillset(s) Requirement:

• Fluency in Chinese, both written and spoken
• Knowing how to speak Hebrew is a huge plus
• Strong communication skills
• Strong social skills and intuitive feel for group dynamics

Attributes:

• Strong communication skills necessary
• Life long learning mindset
• Kind, friendly and approachable

We are looking for a Software Engineer who are inquisitive self starters that are able to thrive well in ambiguity who enjoys being at the forefront of a revolution in technology. You will be challenged with solving complex problems daily. If you are passionate about the future of decentralized finance, with strong desire to leave your mark on the Web 3.0 space, we want you!

Responsibilities:

• Design, architect and implement core features and peripheral contracts
• Design and write thorough unit and integration tests to test the developed smart contracts under various scenarios to ensure the dApp security
• Research and explore other protocols and programming models
• Maintain well-written documentation for internal and external users
• Improve development tooling and productivity in the smart contract team
• Participate in public protocol discussions on Discord or Twitter

Requirements:

• 1+ years of experience in writing smart contracts (in either Solidity, Rust, or equivalent) that have been deployed to a production mainnet.
• 4+ years of experience in software engineering. Able to develop backend and automation scripts in Typescript, Javascript, Shell and/or Python.
• Have good knowledge of data structures and optimisations
• Proficient in verbal and written communication in English
• Remote friendly but must be willing to work around GMT +8 Timezone Primarily

• Responsible for direct sale of vacuum pumps, systems, parts and services in Singapore. Be accountable for individual sales target to be determined by the Company.

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Automotive, Pharmaceutical, Electronics, Semiconductor etc.

• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.

• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.

• Responsible for quarterly Sales forecasting and meeting monthly and yearly “Sales” target for Singapore region.

• Track and report sales activities; submit weekly and monthly report promptly.

• Handle sales inquiries and generate proposal to customers for sale of pumps, repair, field service and spare parts.

• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.

• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.

• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.

• Working closely with customers to find application possibilities and propose suitable technical solutions.

• Conduct competitive analysis and identify market price for various customers and market segments in Singapore.

• Conduct product and application training.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

OVERALL PURPOSE OF THE ROLE:

• Participate in the development of the T&C procedures and adequate method statements based on defined specifications from the system and sub system design to meet the contractual requirements.
• Prepare, manage and lead the on-site execution of the T&C activities until final handover to the authority.
• Coordinate and lead the execution of the Integrated T&C activities (external interfaces tests) with the participating E&M contractors. • Execute the on-site testing based on the approved subsystem procedures and Method Statements.
• Troubleshoot and provide preliminary investigations report on faults identified during the site testing.
• Perform testing and reporting activities consciously with quality,
• Maintain a close coordination with the different internal stakeholders such as Engineering, Installation, V&V and metiers experts to secure the delivery of the Signalling System under commissioning.
• Ensure the application of all EHS Golden rules (AZDP) during T&C activities.

S/he reports functionally to the ATS T&C Leader and hierarchically to the T&C Manager. Maintains a close relationship with the others members of the T&C and V&V teams.

QUALIFICATIONS & SKILLS:

EDUCATION
• Bachelor degree in Engineering or equivalent experience

TECHNICAL COMPETENCIES & EXPERIENCE

• Minimum of 2 years relevant experience in engineering, V&V, T&C or maintenance for railway signaling,
• Knowledge in deployment processes of Driverless Signaling systems (or with similar complexity),
• Good knowledge in Signaling environments and railway operations principles,
• Ability to define the testing principles leading to the preparation of the tests plans and/or procedures and reports, ability to define acceptance criteria,
• Experience in leading the troubleshooting of complex issues involving various internal and external systems. Relevant experience in commissioning of complex systems (ATS, SCADA or similar),
• Knowledgeable in OPC client-server architectures, XML, COM/DCOM, Database (MS-SQL), Windows HMI design, basic network configuration, and operating systems fundamentals,
• Knowledgeable in common programming and scripting languages,
• Experience in software testing and problem troubleshooting.

2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

Commissioning (Cx) Lead Engineer – Mechanical, Data Centre

Role: Leads the commissioning of all mechanical systems within the data center, with a focus on achieving optimal cooling and environmental control essential for data center operations.

Key Responsibilities:

Develop and implement mechanical commissioning procedures .

Ensure systems are tested for cooling redundancy and efficiency, meeting stringent uptime and temperature control requirements.

Oversee performance testing of cooling systems, including airflow management and pressure tests to prevent hotspots and optimize cooling efficiency.

Collaborate with design and operations teams to ensure mechanical systems align with energy efficiency, environmental, and operational goals of data centers.

Troubleshoot and optimize complex mechanical systems to ensure high reliability and continuous operations.

Provide technical reports on system performance and recommendations for mechanical systems' long-term operation.

Familiarity with ASHRAE data center cooling guidelines.

Expect more. Connect more. Be more at Diebold Nixdorf.

Our teams automate, digitize, and transform the way more than 75 million people around the globe bank and shop in this hyper-connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role.

Attend field service ticket assigned by helpdesk, working on the ticket with status update, interrupt the ticket whenever necessary, close ticket when done with resolution. Follow up with interrupt tickets. Maintain a good manner for parts handling, for return & disposal.

Installs, debugs and provides technical maintenance for product and component hardware and software, mainly on customer premises. Provides scheduled inspection, cleaning and other services and performs minor product repairs within an assigned territory. Inspects products for correct operation and resolves noted issues and / or escalates according to established procedure. Schedules services, completes all required paperwork and works with customers to ensure satisfaction with service delivery and understanding of product functionality.

RESPONSIBILITIES

· Gains familiarity with Field Service Technician practices and procedures.

· With guidance and / or in conjunction with more experienced technicians performs any or all of the following: Incident Handling: Utilizes diagnostic tools to perform troubleshooting via detailed analysis of hardware and software failures.

· Performs hardware repairs on a component level.

· Cleans and adjusts mechanical components.

· Configures and installs applicable software.

· Preventive Maintenance: Performs routine checks according to documented procedures.

· Refills consumables as directed.

· IMAC/R: Installs, moves, adds, changes and removes hardware and software products.

· Customer Training: Instructs and trains customers on usage and operation of installed hardware and software.

· Participates in regular hardware and software trainings (on the job, classroom and web based).

· Participates in the implementation of measures to achieve agreed KPIs.

· Assists with special projects as assigned.

QUALIFICATIONS

• Minimum of 1-2 years of relevant experience or equivalent combination of education and experience in Field Services.
• Good written and verbal communication skills.
• Basic Mandarin language skill required due to operational needs.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

ABOUT US

Why should you join Diebold Nixdorf?

Brightest minds + technology and innovation + business transformation The people of Diebold Nixdorf are 23,000+ teammates of diverse talents and expertise in more than 130 countries, harnessing future technologies to deliver personalized, secure consumer experiences that connect people to commerce. Our culture is fueled by our values of collaboration, decisiveness, urgency, willingness to change, and accountability.

–Diebold Nixdorf is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, or disability status.

** To all recruitment agencies: Diebold Nixdorf does not accept agency resumes. Please do not forward resumes to our jobs alias, Diebold Nixdorf employees or any other organization location. Diebold Nixdorf is not responsible for any fees related to unsolicited resumes**

We are a global Company operating in multiple Locations and Entities. As we are keen to find the best solution for our candidates several legal entities might be applicable for a Job offer. A List of our operating entities can be found here - https://www.dieboldnixdorf.com/en-us/about-us/global-locations

Duty and responsibility

• Plan, organize and ensure the First Article, Incoming QC, In-Process QC; Final-QC activities are performed efficiently and effectively.
• Supervise and lead a team of QC Leaders/Specialist/Inspectors.
• Establish, review quality control plans, standard operating procedures to ensure products and processes conform with customer specifications
• Work with cross functional departments to ensure product quality and system requirements are realized.
• Liaise with suppliers to improve their processes and resolve material/component related quality issues including RTV lots.
• Perform internal audit to warrant processes and procedures are well maintain and comply with ISO 9001, 13485 Standards and Regulatory requirements
• Lead in the investigation of product non-conformity, gather, analyse data to determine root cause and implement corrective/preventive action to prevent recurrence.

Requirement

• 5 years’ experience in QA functions, preferably in the medical device/plastic moulding manufacturing.
• Good knowledgeable in statistical techniques, eg SPC, CPK, Gage R&R and FMEA.
• Well versed in measurement metrology eg, familiar with CMM, Smart-scope and the ability to interpret Engineering drawings and specifications.
• Computer literate with proficiency in Microsoft Office (Word, Excel, and Power Point).

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board

• Maintain max passing yield results

• Test Board Maintenance activities (Perform socket replacement and testing)

• Identify Issues

• Reporting of service activities

• Management of spare socket inventory

• Technical service on industrial chambers

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

1 - 2 Years Experience

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Able to do soldering work on tiny component

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

Location: Changi

Responsibilities

1. Coordinate services, resolve site issues, and provide feedback.

2. Review contractor submissions (shop drawings, method statements, etc.).

3. Ensure emergency preparedness protocols.

4. Attend meetings (site, progress, QAQC).

5. Monitor quality, progress, and compliance.

6. Review drawings, method statements, and risk assessments.

7. Coordinate As-Built information and defect rectification.

8. Maintain daily records (tests, inspections, safety, etc.).

9. Provide safety oversight and ensure compliance.

10. Liaise with authorities.

Skills

1. Communication and coordination

2. Technical knowledge (civil/structural engineering)

3. Quality control and assurance

4. Safety management

5. Problem-solving and analytical thinking

6. Leadership and teamwork

Qualifications & Experience

1. 4+ years of experience in civil/geotechnical engineering

2. 3+ years in design/supervision of major construction projects (tunnels, excavation, foundation)

3. Recognized Civil/Structural or Geotechnical Engineering degree (PEB Singapore)

4. Accredited by JAC (IES/ACES)

Key Responsibilities:

1. Lead site staff to monitor, supervise, and inspect works

2. Ensure compliance with statutory codes and quality control procedures

3. Manage construction administration and progress reporting

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

Want to be part of a fun and exciting team in one of the fastest growing IT companies in Singapore? Xtremax is an established IT company that provides IT services such as website development and design to government agencies and private companies to help them transform their digital experience. We are expanding and actively looking for an experienced and highly motivated individual for the Technical Support role.

Responsibilities:

• Provide customer support by answering phone and email enquiries
• Primary investigation, information gathering before escalating to internal team for further diagnosis
• Manage operational issues/risks in a timely manner; escalating when necessary
• Keep track of service requests to meet service KPIs
• Follow standard operating procedures, and respond professionally
• Communicate effectively between customers and development team on escalated issues
• Understanding of issues raised by customer
• Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised
• Serve as a key point of contact based on agencies assigned
• Cross functional collaboration: You are required to work with different teams within our organisation to meet the needs of our business.
• Escalate critical issues / roadblocks to the Technical Support Team Lead

Requirements

• Minimum polytechnic diploma in IT, computer engineering, or relevant experience
• Preferably have knowledge in cloud services (eg. Microsoft 365, Amazon Web Services, Microsoft Azure, Google Cloud)
• Preferably have knowledge in ticketing system (JIRA)
• Good interpersonal and communication skills
• Strong analytical and problem solving/troubleshooting skills
• Strong interest in technology
• Ability to communicate highly technical information to both technical and non-technical customer audience
• Ability to work independently and as a team in a dynamic environment

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Apply for this job

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Senior Project Engineer

Responsibilities:

• Lead a team of Engineers and Technicians for the execution of I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Work with team to prepare, review, and submit all the related samples, catalogues, method of statement, risk assessments, panel layout details, design/shop drawings, Operational & Maintenance manual, As-built drawings, and etc for consultants and clients review and approval
• Work closely with team to control and monitor the execution of the projects to ensure that the projects meet the planned schedule, quality and cost requirement
• Communicate and coordinate with all the related stakeholders including internal teams, clients and contractors during the execution of the projects
• Manage site installation and site commissioning
• Manage and oversee the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) in accordance to the clients' requirements
• Troubleshoot and resolve any issue arise during the deployment of the control system
• Prepare and submit the progress claims with all the necessary supporting documents to clients for payment clarification
• Any other duties as assigned by manager

Requirements:

• At least a Degree in Electrical, Electronics or Instrumentation & Control related discipline
• At least 5 years project management working experience related to I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Good knowledge on basic electrical design & control system design philosophy
• Able to work effectively in a multidisciplinary environment
• Possess Class 2 or 3 driving license with own vehicle will be an advantage

Remuneration: Basic + VB

Work location: Alexandra

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built
• documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Strong leadership with problem-solving skills. Strong understanding in structural design is highly advantageous
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.