1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

- Manage and supervise the construction work activities.

- Monitor work progress and project schedule and timeline.

- Design of electrical systems for nursing home projects.

- Conducting technical feasibility study, life cycle study and planning for all electrical systems.

- Preparation of design report, calculation, drawings, specification, cost estimation, method statement and details/ schedules for projects.

- Assist Project Manager in up-keeping the project ISO quality documentation and records.

- Evaluation of tenders and preparation of tender assessment reports.

- Assist Professional Engineer in liaison preparation and follow up of authority submissions with the respective government agencies.

- Responsible on testing and inspection work of electrical.

- Report to the superior on a daily/weekly basis on the progress of site work.

- Ad-hoc & other duties as assigned by the superior.

Job Requirements:

- Bachelors Degree in Electrical Engineering.
(Universities recognized by PE Board is an added advantage)

- Electrical engineering background is an advantage.

- Have more than 3 year of hands-on design experience in building and/or infrastructure projects.

- Good working knowledge of relevant legislation, regulations, codes of practice, and guidelines.

- Team player and able to work independent with minimal supervision.

- Proficient in AutoCAD and BIM.

- Able to work on construction/outdoor conditions.

- Being able to start work immediately would be an advantage.

- Good project management and technical skills.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Job Descriptions:

1. Develop and provide business solutions for SME, Enterprise, and various industry verticals using cloud technologies, participate in test-plan development, integration, and deployment.
2. You will be working with our Cloud Consulting & Sales team to evaluate the requirements and determine actionable tasks, estimates and provide efforts for business solution build and architecture in cloud-based technologies including Application & Infrastructure modernisation, APIs, BigQuery, AI/Machine Learning solutions (Dialogflow, AutoML, Tensorflow etc.).
3. Development of a proof of concept (POC) for business solutions.
4. Responsible for technical documentation on solution implementation.
5. Perform operational readiness tasks and ensure production acceptance criteria are met.
6. Respond to platform technical issues in a professional and timely manner.
7. We are looking for candidates with high-value personal qualities – critical thinking and problem-solving skills, willing to learn, agile and adaptable to changes on the go, with a resilient and can-do attitude.

Requirements:

1. Background in any programming languages, preferably Python/Javascript or NodeJS.

Responsibilities

· Field service work on highly complex equipment which involves troubleshooting, diagnostic and repairing at customer wafer fab in local and overseas facility.

· Knowledge of Laser and optics is beneficial.

· Prepare field service reports on work activity and provide customer with supporting functions on re-occurring problems.

· Training and OJT will be provided.

Requirements

· Bachelor’s Degree or Diploma in Mechanical/Mechatronics/Electrical/Electronics Engineering

· Good interpersonal/communication skills in understanding customer needs.

· Shows initiative and can work independently.

· Able to work overtime and travel at short notice when required.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Key Responsibilities:

• Provide technical support in carrying out preventive and corrective maintenance work on CCTV cameras and backend systems (e.g. network, server storage, Windows OS, video content analytics)
• Attend to service requests from customers promptly and professionally
• Act as single point of contact for all customer enquiries
• Liaise with relevant parties and users on the repairs and adjustments of cameras
• Carry out on-site equipment installation, testing and commissioning as required
• Liaise with principals or suppliers for spare parts
• Work with principals, suppliers, system engineers to resolve technical issues
• Conduct product demonstration to customers
• Candidate will be scheduled for on-call support rotation
• Other duties as assigned
• Comply with the company’s Safe work procedures at all times

Competence (Knowledge, Skills and Abilities):

• Skills in trouble shooting technical problems related to the company’s products
• Skills in relating to and servicing the end-users with a win-win mind set

Requirements:

• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction
• Advantageous to possess Class 3/2B license
• Strong commitment to meeting customer’s SLA

Education & Experience:

• Minimum Higher NITEC in Security Systems Integration or a Diploma in Electrical, Electronics and Computer Engineering
• 2 years’ experience in a similar environment

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

About Us:

At our core, we are a digital health startup with a bold vision: we believe in a future where healthcare is personalised, accessible, and affordable for everyone. Over the past four years, we’ve built a telehealth platform that has transformed healthcare in Singapore, Hong Kong, and Japan. But this is just the beginning.

We are looking for someone who shares our vision and is ready to join us on this journey towards reshaping healthcare in Asia. If you’re ready to do something truly impactful, this is the opportunity to create a legacy that will define the next generation of healthcare.

About the Role:

Are you ready to make a real difference in healthcare? As a Machine Learning Engineer, you’ll play a pivotal role in redefining how technology can deliver personalized healthcare at scale. Working closely with our Head of Engineering, you’ll join a small but elite team tasked with building cutting-edge solutions that integrate AI, machine learning, and LLMs to revolutionize telehealth in Asia.

This isn’t about maintaining the status quo—it’s about crafting a moonshot vision for the future. You’ll have the opportunity to work on groundbreaking challenges, such as scaling relationship management through AI, delivering personalized health insights, and developing tailored medication and products for patients.

Why Join Us?

This is more than a job—it’s a mission. While there may be trade-offs in compensation, what we offer is the chance to be part of something transformative. You’ll have ownership over impactful projects and the opportunity to work with a passionate team dedicated to changing lives through technology and innovation.

What You’ll Do:

• Develop and deploy machine learning models to support personalized healthcare at scale.
• Work on integrating AI and LLMs to enhance data insights, automate processes, and manage patient relationships effectively.
• Collaborate with the Head of Engineering and leadership team to design and implement technical solutions aligned with the company’s mission.
• Optimize ML pipelines for scalability and performance in a fast-paced telehealth environment.
• Ensure the security and integrity of patient data while leveraging it to create actionable insights.
• Continuously experiment and innovate, staying at the forefront of AI and ML advancements.

Who You Are:

• You’re passionate about using technology to make a meaningful impact on people’s lives.
• You have hands-on experience building and deploying machine learning models in production.
• You’re familiar with AI and LLM technologies and understand how to personalize experiences at scale.
• You thrive in fast-paced, high-growth environments and enjoy the challenge of building solutions from scratch.
• You have strong problem-solving skills and a desire to tackle healthcare’s toughest challenges.
• Experience with healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that have the potential to transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions truly matter.
• Ownership over impactful projects and the freedom to explore cutting-edge technologies.

Join us, and let’s build the future of healthcare together.

Why Join Us:

• Impact: Be part of something truly transformative—help lead the shift towards personalised healthcare in Asia.
• Ownership: Full responsibility over the engineering function and the freedom to shape technical direction.
• Equity: Share in the long-term success of the company.
• Flexibility: Work remotely, with occasional travel across Asia to collaborate with the team.
• Mission-Driven: Join a team that’s passionate, focused, and committed to making a real difference in healthcare.

1. The role of Coordination Engineer shall encompass collaboration and chair meeting with all stakeholders
2. T serve as the primary point of contact for HQ, clients, vendors, and project teams.
3. To facilitate regular communication and meetings to keep all stakeholders informed of project progress.
4. To Identify and address any issues or obstacles that may impact project timelines or deliverables.
5. To assist in collaborate with relevant teams to resolve technical or logistical challenges, if possible.
6. To foster collaboration among HQ, stakeholders, PTO, LTA, and subcontractors.

Qualifications & Work Experience

• Bachelor’s degree in project management/ Electronic & Electrical, with 5 years of relevant experience, or Diploma in Mechanical, Electronic, Electrical Engineering with 10 years related field of experience.
• Excellent organizational and multitasking skills, with track record of managing project.
• Strong interpersonal and communication skills, capable of collaborating effectively with all various stakeholders.
• Ability to work under pressure and meet tight deadlines while maintaining high standards of quality.
• Problem-solving and decision-making.
• Risk assessment and mitigation.
• Attention to detail and quality assurance.
• Customer relationship management.

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry

• 5+ years of experience with IT networking and IT systems in Data Center and virtualization technologies (UCS, VMware ESXi, vSphere, vSAN, vCenter, Windows Server, Linux Server).
• Hands-on experience in troubleshooting, and maintaining Aruba Wireless Conductor and Wireless Controller and Access Points, Identity Service Engine, Palo Alto firewalls, and network monitoring and management tools
• Experience with AVLP (Audio-Video, Lightings and Projections) equipment maintenance
• Proficient in managing common network services (SNMP,Syslog, DNS, NTP, DHCP, AD, etc).
• Analyze network performance with tools like Wireshark and provide root cause analysis, recommendations, guidance, and expertise in maintaining the highest level of performance.
• Proven ability to perform complex troubleshooting, backup, archiving, and recovery
• Strong documentation skills

• Hand on install automation machines & systems with meeting planned project & production schedule.
• Maintain and suggest improvement for existing automated production lines.
• Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.
• Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.
• Coordinate with internal team (Sales, Quality, Project, Production, maintenance) and external supplier to make projects successful.
• Participate of root cause analysis of product failure within cross functional team.
• Prepare machines preventive maintenance check list and train operation & maintenance staffs.
• Monitor automation system performance and provide support & perform service production automation line when necessary.
• Any other duties as and when assigned.
• Adhere to workplace health and safety. Abide by all EHS policies and procedures

Requirements

• Diploma of Engineering in Automation / Mechanical /Mechatronics / or equivalent. Fresh graduates are welcome, on job training will be provided.
• ITE with serval years’ experience are welcome.
• Experience in automation machine design are advantages.
• Hands-on experience of electrical and mechanical assembly & installation
• Knowledge on Mechanical/Mechatronics/Electrical components.
• IT skills (MS Office)
• Communicate well in English

• Fire Protection System comprising of Fire Alarm, Sprinkler, Hosereel, Hydrant, Rising Main, Emergency Communication, Gas etc.
• Plan, lead and manage a team of supervisors in implementing fire protection installation for the project throughout the concept stage, design development, contract documentation, authority submissions, site administration & management, testing & commissioning to project completion
• Assist & Report Directly to the Project Director on overall project management.
• Supervision of work, liaise with main contractors/sub contractors / site supervisors/ foremen and workers regarding the overall implementation on site
• Attend meetings with owner, consultants and main contractors on all matters relating to the project operation and co-ordination
• Opportunity to work on world class data center project with international consultants and client
• Excellent work environment
• 
  

Job Requirements

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma in Engineering or equivalent.
• Ideally 1-3 year(s) of working experience in the related field is required for this position.
• Good command of English and Computer Literate
• Able to work under tight deadlines
• Excellent interpersonal, communication and negotiation skills
• Self-driven, independent, self-motivated, proactive street smart.
• Wiling to learn & fast learner.
• Enthusiastically motivated individuals
• Strong Technical fundamental will be advantageous.
• Fresh Graduate are welcome to apply

Education Level:

· Professional Certificate/NiTEC

· Diploma/Advanced/Higher/Graduate Diploma

· Bachelor's Degree/Post Graduate Diploma/Professional Degree

Field of Studies

· Engineering (Electrical/Electronic)

· Engineering (Industrial)

· Engineering (Mechanical)

• Fire Protection System comprising of Fire Alarm, Sprinkler, Hosereel, Hydrant, Rising Main, Emergency Communication, Gas etc.
• Plan, lead and manage a team of supervisors in implementing fire protection installation for the project throughout the concept stage, design development, contract documentation, authority submissions, site administration & management, testing & commissioning to project completion
• Assist & Report Directly to the Project Director on overall project management.
• Supervision of work, liaise with main contractors/sub contractors / site supervisors/ foremen and workers regarding the overall implementation on site
• Attend meetings with owner, consultants and main contractors on all matters relating to the project operation and co-ordination
• Opportunity to work on world class data center project with international consultants and client
• Excellent work environment

Job Requirements

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma in Engineering or equivalent.
• Ideally 1-3 year(s) of working experience in the related field is required for this position.
• Good command of English and Computer Literate
• Able to work under tight deadlines
• Excellent interpersonal, communication and negotiation skills
• Self-driven, independent, self-motivated, proactive street smart.
• Wiling to learn & fast learner.
• Enthusiastically motivated individuals
• Strong Technical fundamental will be advantageous.
• Fresh Graduate are welcome to apply

Education Level:

· Professional Certificate/NiTEC

· Diploma/Advanced/Higher/Graduate Diploma

· Bachelor's Degree/Post Graduate Diploma/Professional Degree

Field of Studies

· Engineering (Electrical/Electronic)

· Engineering (Industrial)

· Engineering (Mechanical)

Responsibilities

● Collaborate with the sales/business development team to understand customer requirements and use cases, and identify how Company's Robotics solutions can address those needs.

● Conduct product demonstrations and presentations to potential customers, showcasing the features and benefits of company's robotics solutions.

● Develop proof-of-concept capabilities through ad-hoc software development and mechanical/electrical design with the help of internal engineering teams.

● Work closely with customers to understand their specific use cases and provide expert guidance on the integration of our robots into their operations.

● Create technical proposals and documentation tailored to customer requirements.

● Develop a deep understanding of Company's Robotics' products and stay up-to-date with the latest advancements in the field.

● Act as a technical liaison between customers and our internal engineering teams, ensuring a smooth transition from presales to implementation.

● Support the sales team by participating in customer meetings, technical discussions, and addressing customer inquiries.

● Provide feedback to to internal product development team based on customer needs and market trends

Requirements:

● Background in Computer Science/Electrical Engineering/Mechanical Engineering.

● Strong technical knowledge in their domain and the ability to work with customers.

● Should have at least one of the following:

○ Experience in Python or Javascript or C++. (or)

○ Experience in CAD software such as SolidWorks. (or)

○ Experience in mechatronics design such as working with Arduino or custom PCBs.

● Excellent presentation and communication skills.

● Ability to understand and address customer requirements and translate them into technical solutions.

Good to have:

● Experience with cloud computing platforms (e.g., AWS, Azure, Google Cloud).

● Familiarity with Docker, Jenkins, and other deployment tools.

● Exposure to backend system design to support robotics applications.

● Participation in robotics-related hackathons or competitions.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Job Description:
1. Design and engineering of Electrical Services.
2. Liaise and coordinate with architect, others consultants, owners and contractors in
development and implementation of the project until completion.
3. Provide project design and development.

4. Prepare drawings plan for submission to Authorities.
5. Prepare tender document and tender drawings for tender.
6. Attend to site progress meeting and site technical issues.
7. Work with others engineers and designer to complete assigned work within deadlines.
8. Liaise with authorities for plan approval and site inspection.
9. Conduct testing and commissioning of Electrical System.
10. Handover of the system during completion.

Job Requirement:
• Relevant degree recognized by PEB, Singapore in Electrical Engineering
• Extensive Electrical experience in designing M&E Building services, ideally with experience in healthcare project.
• Knowledge of relevant design standards and local authority regulations.
• Knolwedge of Autocad

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

We are seeking a motivated and detail-oriented Network Engineer (L1) to join our team. This entry-level role is part of our Managed Services team, where you will provide first-line support to ensure the smooth operation of clients’ IT infrastructure and systems. The role involves proactively identifying, investigating, and resolving technical issues, managing incidents to resolution, and ensuring no service level agreement (SLA) conditions are missed.

As an L1 Engineer, you will focus on standard and low-complexity incidents and service requests across multiple technology domains, including (but not limited to) Cloud, Security, Networking, Applications, and Collaboration. You may also support project work as req

Key Responsibilities:

- Monitor and maintain IT infrastructure to ensure optimal performance.
- Provide first-line support for incidents and service requests in alignment with SLAs.
- Investigate, troubleshoot, and resolve low-complexity technical issues.
- Escalate complex incidents to higher-level support teams when necessary.
- Contribute to project work as needed to support team objectives.

Preferred Qualifications:
- CCNA Certification or equivalent Level 1 Network Security certification.
- ITIL V3 Foundation Certification.
- CompTIA Network+, CompTIA Security+, or equivalent certification.

If you are passionate about IT, eager to learn, and ready to contribute to a dynamic team, we encourage you to apply!

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and package

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:

• Bachelors/ Masters in Engineering
  
• Showcase leadership experience/potential
  
• Have engaged in projects during internships
• Great teammate
  
• Showcase critical thinking
• Keen interest in Semiconductor industry
  

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Job Description:

We are seeking a highly skilled Ansible Automation Engineer to design and implement automation solutions tailored to diverse customer needs. The successful candidate will focus on developing robust playbooks and workflows to automate day-to-day IT operations across multiple domains, ensuring seamless integrations with industry-standard tools like Remedy and Jira.

Location: Onsite - Singapore

Experience Level : 5 years

Key Responsibilities:

• Collaborate with customers to understand automation requirements and define scope and workflows.

• Develop and maintain Ansible playbooks to automate day-to-day IT tasks across middleware, database, networking, infrastructure provisioning etc.

• Implement and manage integrations with ITSM tools like Remedy and Jira to streamline incident and change management processes.

• Ensure automation frameworks adhere to best practices in security and scalability.

• Troubleshoot, test, and validate playbooks to ensure reliable deployments and operations.

• Work closely with cross-functional teams to align automation strategies with overall IT objectives.

• Document automation workflows, processes, and best practices.

• Document automation workflows, processes, and best practices.

Required Skills:

• Ansible Expertise: Strong proficiency in Ansible and Ansible Automation Platform for playbook development, role creation, and managing inventory.

• System Administration: In-depth knowledge of Linux (RHEL, CentOS, Ubuntu) and Windows environments, including configuration and troubleshooting.

• Scripting and Development: Expertise in Python, Bash/Shell scripting, and YAML for automation and customization.

• Networking Automation: Hands-on experience with network device configurations (Cisco, Juniper, Palo Alto etc.) using Ansible.

• Database Management: Familiarity with automating database tasks for MySQL, PostgreSQL, Oracle, or MS SQL.

• ITSM Tools Integration: Proven experience with integrating ITSM tools such as Remedy and Jira.

• DevOps Practices: Knowledge of CI/CD tools like Jenkins, GitLab, or Azure DevOps, including pipeline automation.

• Containerization: Basic knowledge of Docker and Kubernetes for containerized application management and deployment automation.

• Security Practices: Familiarity with SSH, SSL/TLS, and other security mechanisms for secure automation.

• Version Control: Proficiency with Git for version control and collaboration.

Preferred Qualifications:

• Experience in deploying Ansible Automation Platform (AAP).

• Certifications: Red Hat Certified Specialist in Ansible Automation or equivalent certifications.

• Understanding of CI/CD pipelines and workflows.

• Certifications in Ansible or related IT automation domains.

Why Join Us?:

• Opportunity to work on diverse and challenging automation projects.

• Be part of a team driving digital transformation for top-tier clients.

• Access to cutting-edge technologies and continuous learning opportunities.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Responsibilities:

• Develop new accounts and manage existing customers
• Evaluating sales potential and actively follow up with customers’ requirements
• Identify customers’ needs and offer technical solutions, training & application support
• Plan, forecast and materialize sales target

Requirements:

• Degree/Diploma in Electrical / Electronic Engineering with preferably 2 years’ of sales experience in the electronics industry.
• Preferably with technical background in areas relating to electrical/electronic equipment.
• Prior experience in Renewable Energy and Battery related applications experience will be a plus.
• Proficient in computer hardware and software
• Able to learn and assimilate new technology quickly
• Dynamic, Independent and able to adapt to multi-tasking environment
• Preferably have a car
• Willing to travel

5 days week (9.00 AM - 6.00 PM)