Position Summary

Your main role will be to ensure that Lam Research comply with regulatory and safety requirements. You will be is responsible for administering and coordinating the organization’s Workplace Safety and Health Management Systems, processes and policies. This will include conducting safety inspections, closing audit findings, reviewing workplace risk assessment and coordinating safety training for all personnel.

Job Responsibilities:

• Enter, inspect and examine worksite for potential safety violations/hazards; (WSH Reg)
• Inspect and examine any machinery, equipment, plant, installation or article in the worksite for potential violations / hazards; (WHS Reg)
• Assess the level of noise, illumination, heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work; (WSH Reg)
• Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite. Coordinate with management, customers and relevant authorities when an incident / accident occurred
• Employ risk mitigation strategies, and environmental and safety requirements for the business unit;
• Identify safety lapses and provide solutions to improve. Execute to aligned action plans to close the identified gaps;
• Conduct audits to ensure conformance to Lam’s and customers’ safety requirements, policies and procedures;
• Conduct safety briefings (as appropriate) including representing Lam Research at customer meetings on issues relating to EHS;
• Report/ assist in any accident / injury/ near misses’ investigations
• Establish mechanisms to implement and monitor compliance requirements such as advise and assist with job analysis, risk assessment, job instruction training, safe work procedures, method statement
• Establish tracking and ensure that all Lam personnel attend required training such as CSOC (Construction Safety Orientation Course) and other related EHS (Environmental, Health & Safety) training for employees, including new hires, contractors and loaners from other countries;
• Take appropriate action to halt any conditions that may result in imminent hazard to persons, property, or the environment;
• Perform the role of Safety Assessor for the inspection/ assessment of Permit-to-work system
• Notify the local EHS manager of any unresolved compliance issues and situations, and seek EHS guidance in implementing corrective actions as needed; facilitate and promote the exchange of information within the business unit and with EHS in the interest of collaborative problem solving and program improvement;
• Represent the business unit on EHS committees (Customer meetings) and provide regular briefings to business unit management and the local EHS manager on the unit’s environmental and safety program status, trends and risks.
• Identify PPE (Personal Protective Equipment) requirements and sourcing of approved supplier for procurement
• Assist in applying special permits if certain work is required (e.g. hot work, working at tall heights etc), including facilitating the application / renewal of licenses and liaise with relevant authorities/bodies for license / permit issue
• Maintenance of worksite safety records, certificates, notices and documents (WSH Reg)
• Manages internal WSH systems, coordinates government agency or customers visits, inspections and compliance audit at the workplace and submit audit reports to relevant stakeholder for review (Customs, Foreign Trade, Biz Safe, MOM)
• Point of contact for physical security in Singapore Office
• A key member of the SEA BCP (Business Continuity Plan) team, responsible to ensure that the business continuity plan is up to date and support the coordination of annual BCP tabletop exercise.
• Lead a team of contract EHS officer / coordinator, ensuring that adequate resources are deployed to support different customers sites.
• Any other Safety, Health and Environmental related duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor’s degree or equivalent
• Processes relevant qualification recognized ty the Ministry of Manpower
• Must be a registered Workplace Safety and Health (WSH) Officer with the Ministry of Manpower
• At least 10 years’ experience handling a WHS in a manufacturing site, preferably in the electronic or semiconductor industry
• Possesses strong inter-personal and communications skills, both in written and spoken English
• Comfortable to interact with people of diverse backgrounds
• Is meticulous and maintains detailed and accurate records
• Possesses good analytical and problem solving skills

Roles and Responsibilities

• Develop and establish quality assurance deliverables and testing framework, including estimate testing scope and time needed based on user requirements, create and maintain test specifications in accordance with changing requirements, throughout development;

• Create and maintain automated test framework using tools such as Cucumber/Selenium to support continuous development and testing, including prepare test environment, create and maintain functional testing scripts in accordance with changing requirements;

• Conduct manual functional / exploratory testing to compliment automated testing, including browser testing and system integration tests with other modules;

• Conduct impact analysis of defect fixes discovered during manual or automated tests

• Validate stories using acceptance criteria, raising defects as needed and work with development team to improve the expected behaviours and test cases;

• Conduct performance and load tests if needed, validate the output and expected outcomes and feedback on improvement required;

• Conduct application performance and security testing if needed, to ensure we have a robust and secured system in place;

• Work with Business Analyst on UAT data preparation and support;

• Work collaboratively with the rest of the technical and business team, including understanding the business/user requirements to facilitate testing, participate in desk-checks to do early validation and verify completeness of story, as well as participate in showcases to demonstrate tested stories;

• Conduct system integration tests with external parties when necessary, validate the output and expected outcome e.g. data to and from external parties’ systems and feedback on improvement requirement;

• Work with DevOps team to establish process for deployment and maintaining CI/CD pipeline

Knowledge and Skills

• Tertiary education in relevant fields is preferred

• Experience in programming in Java / Python / NodeJs is preferred

• Hands-on experience with software testing including automated functional testing tools such as Cucumber, Selenium, Maven, Capybara is preferred.

• Experience doing automation testing in Agile development process will be an added advantage

• Have SQL scripting skills

• Hands-on experience in one or more of the followings is preferred:

o Application exploratory testing and regression test automation

o Application performance testing

o Application security testing

• Have relevant knowledge of software QA methodologies, tools, and processes

• Hands-on experience with performance testing tools such as JMeter, Gatling will be an added advantage

• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.

• Strong analytical and problem-solving skills

• Good presentation and listening skills

• Good writing skills

• Good communication and interpersonal skills

• Team player

• Meticulous attention to details

• Able to multi-task, take initiative and work independently with multiple stakeholders

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

Requirements

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire an Junior System Engineer. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

JOB TYPE:

Long Term Contract

Job Description

· Support SCCM

· Daily operation includes reports of end point and server

· Lvl 2 troubleshooting

Requirements:

SCCM

Active Directory Services

To submit your application, please apply online or share the updated cv to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Khalid Farooq

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy policy

Must have worked strong hands on working experience on all the network skills and more specifically must have extensive experience in Zscaler and Zero Trust

Should have worked on many projects; network support projects in this technology Zscaler and Zero trust.

Resource must be Bilingual – Chinese + English Speaking

Job Description & Requirements

Responsibilities:

• Assist to Plan and schedule work sequences for construction operation
• Liaise with emmployees / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Preparation of progress report, and site expenses details.
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Qualifications:

• Any diploma or degree related to construction.
• Strong problem-solving skills with the ability to analyse complex issues and propose effective solutions.
• Excellent attention to detail and the ability to prioritize and manage multiple tasks.
• Good interpersonal skills and the ability to work effectively in a team environment.
• Proficient in using microsoft word and excell documentation, and project management.
• Good attitude with willingness to learn and take on new challenges in a fast-paced environment.

JD:
Big Data Developer
 Good understanding of concurrent software systems and building them in a way that is scalable, maintainable, and robust
 Experience in designing application solutions in hadoop ecosystem
 Deep understanding of the concepts in Hive, HDFS, yarn, Spark, Spark sql, Scala and Pyspark
 HDFS file formats and their use cases (eg Parquet, ORC, Sequence etc)
 Good knowledge in data warehousing system
 Experienced in any scripting language (SHELL, PYTHON)
 HortonWorks distribution and understanding on SQL engines (Tez, MR)
 Java/RestServices/Maven experience is a value addition
 Control-M development. Monitoring Resource utilization using Grafana Tool
 Good skillset to create automation scripts in Jenkins & knowledge in working on automating builds, test frameworks, app configuration etc
 Experience in implementing scalable applications with fully automated deployment and control using Bitbucket, Jenkins, ADO etc
 Skillset:
o Mandatory: Big Data – Hive, HDFS, Spark, Scala, Pyspark.
o Good to have : Schedulers (Control-M), ETL Tool – Dataiku , Unix/Shell scripting , Knowledge of Integration services of FileIT/MQ and others , CI/CD tools – Jenkins, Jira, ADO Devops – tools suite , Oracle .

Job Description

• Follow up on the design, fabrication, testing, FAI, and fixtures for manufacturing processes.
• Estimate costs for tooling to quote.
• Set up and manage Epicor costing and transactions.
• Provide DFM, Gantt Charts, and follow up with customers to ensure tool approval.
• Source and procure tools, inserts, and fixtures from suppliers.
• Obtain and follow up on third-party tooling quotations until project closure.
• Identify opportunities for process improvements and implement changes to increase efficiency and reduce costs.
• Collaborate with manufacturing, quality, and production teams to ensure tooling meets production requirements.
• Troubleshoot tooling issues and implement corrective actions.

Requirements

• Minimum Diploma in Engineering or a related field
• Minimum 3 years of experience as a Project Engineer in the manufacturing industry
• Good communication skills, able to interact with people of all levels and teamwork
• Maintain accurate records of tooling designs, costs, and maintenance schedules.
• Ensure tooling designs and processes comply with relevant regulations and industry/customer standards.

- prepare contracts and monthly progress claims and variation orders

- assist to handle variation orders

- read, understand and intepret contractual terms

- able to read and interpret construction drawings

- prepare reports - able to analyse and compare quotations

- attend meetings with clients and suppliers and contractors

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

1. JOB DESCRIPTION

Job Title

Assistant Production Engineer

Job Description & Requirements

Overview

As an Production Engineer (Senior / Assistant), you will assist the Production Manager in managing the Overall Operation of Precast Cconstruction Plant. You are to adhere to Quality, Environmental, Safety Management System in accordance with Company’s standards and customers’ requirements.

Responsibilities

1) Identifies operational problems by observing and studying system functioning and performance results; investigating complaints and suggestions; interviewing process supervisors and operators; completing troubleshooting procedures.

2) Identifies operational priorities by assessing operational objectives; determining project objectives, such as, efficiency, cost savings, energy conservation, operator convenience, safety, environmental quality; estimating relevance, time, and costs.

3) Develops operational solutions by defining, studying, estimating, and screening alternative solutions; calculating economics; determining impact on total system.

4) Anticipates operational problems by studying operating targets, modes of operation, limitations & performance.

5) Improves operational quality results by studying, evaluating, and recommending process re-design; implementing changes; contributing information and opinion to improve productivity performance.

6) Provides operational management information by collecting, analyzing, and summarizing operating and engineering data and trends.

7) Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.

8) Participate in reviewing Company Quality, Environmental, Safety and Health Risk Assessment to ensure its effectiveness.

9) Participate in investigation of EHS incident and recommend preventive measure.

10) Authorize to stop production relating to Safety, Environmental or Efficiency issue not complying to Company Quality, Environmental, Safety and Health Management System or Procedure.

11) Verify that solutions agreed for problems relating to non-conformities relating to product process and Company Quality, Environmental, Safety and Healthsystem are implemented.

12) Review and recommend the disposition of the rejected in-coming raw material, work-in-process and finished goods.

13) Review and endorse Company Quality, Environmental, Safety and Health System Procedure.

14) Manage, coach and train the team members which include carrying out performance review and disciplinary action, if required.

15) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum ITE

a) Preferably in Fabrication / Civil Engineering

b) 5 years’ experience working as Engineer or 8 years’ as Technician in a manufacturing environment

2) Diploma in Engineering

a) Preferably in Fabrication / Civil Engineering

b) 2 years’ experience working as Engineer in a manufacturing environment

3) Preferably with knowledge of manufacturing and assembling of Precasting.

4) Knowledge of ISO 9001, 14001 & 45001 standards and AutoCAD will be advantages.

5) Knowledge in Safety Management is a must.

6) IT savvy with proficient in Microsoft Office application.

7) Possess leadership and supervisory skills with manpower planning experiences.

8) Possess problem-solving, analyzing and reporting skills.

9) Possess good interpersonal skills and excellent team spirit.

10) Independent with high level of initiative and fast learner.

11) Meticulous and positive attitude in learning.

(A) Job Summary:

Assists the Construction Manager in overseeing day-to-day site works.

(B) Essential Job Functions:

The Site Engineer is responsible, but not limited to, the following:

• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Monitor the daily progress of work-on-site, identifying potential delays or issues and implementing necessary
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering ary adjustments to keep the project on track.
• Oversee the preparation of monthly progress reports for in-house, owner, and consultant submissions, highlighting key achievements and milestones.
• Produce weekly site progress reports and necessary submissions
• Attend meetings, and conduct site inspections on work progress to ensure quality control by authority requirements.
• Maintain safe and clean working environment and ensure compliances according to standard rules and regulations
• Any ad-hoc duties as per assigned by Construction Manager/ General Manager/ Project Director.

(C) Minimum Qualifications/ Job Experience:

• Minimum 6 years’ engineering experience with a Degree in Civil Engineering recognized by the PE Board or qualification / Degree in the relevant field subject to the acceptance of the SO.
• At least 3 years’ experience in main contractor on projects of similar scale, nature and complexity.
• Prior experience in working in construction site, especially in Civil Projects.

As a Senior Quality Engineer – Mechanical Parts & Complex Assemblies at MKS Instruments Manufacturing operation located in Kaki-Bukit, Singapore you will be responsible for leading the quality assurance of mechanical components and complex mechanical assemblies used in our laser-based systems. This role involves developing and executing inspection and testing protocols, managing inspection systems, and performing failure analysis activities. The ideal candidate will possess a strong background in dimensional inspection, troubleshooting complex mechanical parts and assemblies, and extensive ISO-9001 quality systems expertise. This role involves ensuring product quality, resolving issues related to mechanical components & sub-systems and driving continuous improvement initiatives.

Key Responsibilities:

Quality Assurance & Inspection:

• Develop detailed dimensional inspection plans for mechanical components and assemblies using tools such as CMM, and optical comparators.
• Develop and maintain inspection protocols and test plans for mechanical parts and assemblies.
• Interpret technical drawings, GD&T (Geometric Dimensioning and Tolerancing) and engineering specifications to ensure compliance.
• Failure analysis & Troubleshooting: Investigate failures in mechanical parts and assemblies, identifying root cause using techniques such as metallurgical analysis, fractural analysis and FMEA.
• Utilize statistical methods to define appropriate sample sizes based on part criticality, lot size and supplier performance.
• Validate cleaning processes for incoming parts and verify their compliance with cleanliness requirements.
• Conduct first article inspections (FAI) for new parts to validate conformance to design specifications.

Quality Management System (QMS):

• Implement and maintain QMS processes in compliance with ISO 9001 and other relevant standards.
• Support internal and external audits, including preparation, execution, and follow up actions.

Supplier Quality Improvements:

• Evaluate and qualify suppliers for mechanical components, ensuring adherence to quality standards and specifications.
• Collaborate with supplier to investigate and resolve non-conformances and drive quality improvement.

Data Analysis & Reporting

• Analyze quality data to identify trends, drive decision-making, and recommend process improvements.
• Create reports and dashboards to communicate quality performance metrics to stakeholders.

Continuous Improvement:

• Lead initiatives to improve product quality and manufacturing processes.
• Provide recommendations for process improvements based on data analysis and best practices.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost effectiveness.

Requirements:

• Bachelor’s/Master’s degree in Mechanical Engineering, Quality Engineering, or a related field.
• 5+ years of experience in mechanical parts inspection, quality engineering, failure analysis, preferably in laser, systems, or manufacturing environments.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Strong background in mechanical parts inspection, including dimensional inspection tools & GD&T.
• Proficiency in CAD software for drawing interpretation (e.g Solidworks, Autocad).
• Experience with Quality Software such as Minitab, SPC tools, SAP ERP & Agile PLM.
• Experience in failure analysis techniques, Optical Microscopy, Stereo Microscopy, Material property analysis, Surface roughness measurements etc.
• Strong knowledge of QMS and ISO 9001 standards.
• Experience with supplier audits and managing vendor relationships.
• Familiarity with fabrication and cleaning processes for mechanical parts.
• Excellent problem solving, analytical, and communication skills.
• Experience with lean manufacturing and continuous improvement methodologies.
• Hands on experience with laser or systems manufacturing is a plus.

An Infrastructure Engineer (IE) is responsible for designing, building, deploying, and maintaining the IT infrastructure using the latest technology for our Customers as well as internal in house systems. An Infrastructure Engineer requires all the IT systems that support businesses of any size to function efficiently. Infrastructure here includes Internet connectivity, security, cabling, servers and networking, virtualization platforms, storage area networks and any infrastructure related technologies.

With the expertise, Infrastructure Engineers ensure all of the systems within an organization function seamlessly. They work on site or remotely by evaluating all the systems within an infrastructure. Engineers may also be required to interact with all vendors on behalf of the customers or company concerning the infrastructure.

Infrastructure Engineer should be knowledgeable about network and security concepts, SAN technology and storage, and tuning techniques and system performance configuration and they should have exposure to networking in Windows server and Linux, TCP/IP environment, virtualization technologies, and OS performance monitoring.

Infrastructure Engineer needs good communication skills and must be able to work collaboratively with clients and other technical colleagues. Individuals work across all functional areas of the Company and use a strong customer service orientation to ensure that all service requests and incidents are resolved in a professional manner. They share their expertise and provide individual training and support to their technical colleagues within TSG. Infrastructure Engineer works with other technical staff and vendors to provide IT services to all our customers.

Your job duties will include but not limited to:

· performing installation, configuration, administration, migration, maintenance, tuning, troubleshooting, patching and upgrading of the IT infrastructure;

· managing technical deliverables of any projects and determine deployment strategy with the Project Managers;

· assisting Project Manager to create project plans, project roles and responsibilities, tracking and reporting project status. Communicating delays and issues;

· producing, delivering, and maintaining appropriate documentation for systems in accordance with document control standards and procedures;

· attending to pre-sales call to conduct scooping and customer site evaluation, if any;

· assisting sales in proposal preparation and technical write-out including drawing, if any;

· researching for solution and proposed appropriate solution to enhance / resolve customer’s pain points;

· ensuring customer’s satisfaction is highest at all time

· monitoring and performing capacity and feasibility studies and resolve system related issues.

· providing assistance for the reduction in volume and mean time to recover incidents in your business unit by providing high-level, independent trouble shooting on technical issues;

· providing assistance to Technical Recovery plans, and taking part in technical recovery for major incidents within your defined area;

· working and cooperating with internal and external groups when required in order to fully support environments and maintain service;

· adhering and contributing to the definition and implementation of operating procedures and operability on new and existing systems, ensuring adherence to defined operations standards;

· adhering to change management procedures in defining, planning and implementing change in such a way that ensures appropriate coordination with other teams, minimizing service disruption, and ensuring adherence to Service Level Agreements;

· collaborating with business, third party vendors, developers, application support and technical operations groups to determine appropriate hardware/software needed and to resolve any issues impacting the application processes;

· staying abreast of recent developments in related technical community, including new technology and business news that may impact vendors’ ability to provide service;

· seeking out all information and to fully understand all aspects of each device’s technology configuration and all uses;

· approving engineering tools available to implement conforming changes;

· packaging, company approved hardened versions of targeted operating systems;

· ensuring stack of agents for management systems are properly installed and connected; and

· maintaining patch levels in accordance with change management and security standards.

· Any other tasks assigned by the respective Team Managers and Directors

Requirements

• Minumum 3 years' experience
• Bachelor's degree
• Professional qualifications such as Microsoft 365 Certifications
• Additional qualifications such as CCNA Routing and Switching, ; and/or CCNA Security; VCP in Data Centre Virtualization will be an added advantage
• Must have strong knowledge of enterprise backup solution such as Symantec, CommVault etc.

Responsibilities

· Assist, plan and execute or draft Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule

· Create process flow diagrams, general arrangement drawings, piping & instrumentation diagrams, and isometrics.

· Draft and prepare Shop drawing / as-built drawing of the given MEPL service with (CAD) software.

· Ensure all drawings are in accordance with the standards set by company’s quality.

· Perform file management on a regular basis.

· Participate in continual quality check and improvement of work activities.

· Complies with company safety regulations and ethics.

· Ability to work under pressure.

· Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field.

· Provide technical submission of proposal / drawings / MOS / RA etc

· Able to travel for site survey/study to better understand conditions/limitations onsite and attend site meetings and necessary site walk

· Cooperate and communicate effectively with internal and external stake holder.

· Review engineering deliverable and initiate appropriate corrective actions

· Any other duties as assigned and comply to ISO / OSHA standards

Requirements:

· 2-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors MEPL services

· Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or drafter / mechanical experience.

· Proficient in Good software usage in Autocad / Solidwork / Revit / BIM etc software.

· Able to work independently and yet a team player with leadership.

· Ability to handle multiple projects and task with a high attention to detail.

· Pleasant, mature, meticulous with good interpersonal skills.

· Proficient in MS Excels/words/PowerPoint/Project.

· Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Key Responsibilities:

• Collaborate with the Facilities Manager to engage with clients regarding all operational tasks and projects.
• Supervise and ensure that maintenance programs and rectification tasks are efficiently managed by a team of technical officers and technicians.
• Oversee and coordinate maintenance activities for various Air Conditioning and Mechanical Ventilation (ACMV) systems, including chiller systems, chilled water systems, direct expansion (DX) systems, mechanical ventilation systems, clean room systems, and building management systems.
• Develop comprehensive plans for the installation, maintenance, and operation of ACMV systems.
• Provide guidance and lead technical investigations for rectification works, ensuring effective resolution of issues.
• Ensure daily air conditioning thermal comfort levels are maintained within acceptable limits according to established codes of practice.
• Monitor and report on maintenance work progress, follow up on action items, and maintain thorough maintenance checklists and schedules.
• Innovate and implement improvements to operational processes aimed at enhancing efficiency and promoting energy conservation.
• Work collaboratively with owners, users, consultants, vendors, and contractors to provide feasible solutions that meet engineering functional requirements and ensure project objectives are achieved.
• Conduct regular inspections of existing air-conditioning systems to verify that all maintenance programs are effectively implemented in strict adherence to guidelines and Provide technical specifications for ACMV system upgrades or renovation projects as needed.
• Stay informed about local codes of practice, including ASHRAE standards, to ensure compliance in all operations.
• Ensure that all work is carried out safely and in accordance with established safety procedures.
• Coordinate with contractors for rectification and ad-hoc works, ensuring that all tasks are executed efficiently.
• Investigate, analyze, and determine root causes of breakdowns and faults, reporting findings effectively.
• Prepare detailed technical reports and proposals regarding breakdowns and maintenance activities.

Education and Experience:

• Bachelor’s degree in Mechanical Engineering or an equivalent engineering discipline (mechanical, electrical, or industrial).
• Minimum of 3 years of hands-on experience in ACMV (Air Conditioning and Mechanical Ventilation) systems, facilities management, or project management.
• Proficient in guiding and troubleshooting ACMV faults, with a solid understanding of construction principles and building processes.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills with the ability to collaborate effectively with non-engineering team members.
• Detail-oriented, self-motivated, disciplined, and well-organized, with a strong safety mindset and a commitment to exemplary workplace safety and health (WSH) practices.
• Strong analytical and problem-solving abilities, capable of troubleshooting on-site issues effectively.
• Familiarity with project management principles and practices.

VIBTECH GENESIS excels as a premier provider specializing in industrial IoT maintenance solutions. Renowned for our innovative approach, we continuously push the boundaries of technological advancement in predictive and preventive maintenance within our industry. We are currently seeking a passionate and knowledgeable Sales & Application Engineer to join our team. If you possess robust technical expertise, excellent communication skills, and a dedication to driving sales growth, we encourage you to apply.

JOB RESPONSIBILITIES:

• Know-how, know-where, and know-what for sales approach and deal closure.
• Engage with customers to comprehend their requirements and suggest appropriate Products, Services, Solutions, and Training.
• Develop and deliver compelling product presentations to potential clients, including hands-on product demonstrations.
• Build and maintain strong relationships with existing clients while actively seeking and engaging new customers.
• Provide technical guidance and assistance to clients, addressing queries and resolving challenges.
• Generate technical proposals, quotations, and participate in contract negotiations.
• Conduct product training for clients, ensuring they fully understand the applications and benefits of our solutions.
• Stay updated on industry trends, market dynamics, and competitive offerings.
• Collaborate cross-functionally with project, IT, and service teams to ensure the timely execution of product installations, solutions implementation, and a smooth delivery process.
• Visit clients’ locations and conduct on-site demonstrations, showcasing our portable equipment.
• Maintain compliance with ISO9001 and ISO45001 standards in daily work.

JOB QUALIFICATIONS:

• Diploma/Degree in Mechanical / Electrical / Computer Engineering, or a related field.
• Minimum 1 year of technical sales experience.
• Proven experience in sales and marketing, preferably in the industrial sector, with a focus on oil refining and process, machinery, and predictive maintenance.
• Embraces a growth mindset with strong personal integrity. Demonstrates teamwork, proactive problem-solving, and a positive approach to managing challenges. Ability to collaborate effectively across diverse teams is crucial.
• Good understanding of technical specifications, contract interpretation, and excellent sales negotiation skills.
• Comfortable with on-site settings, even in challenging environments.
• Familiarity with GeBIZ and/or open tender procedures would be an added advantage.
• Ability to start work within a short notice period is preferred.

We appreciate all applicants for your interest. Please note that only those selected for an interview will be contacted.

• Administration experience of Storage Arrays of multiple vendors
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
  Strong analytical skill, very initiative, good planning & systematic execution

Job Scope:

• To carry out full-time site supervision as Resident Engineer as required under the Building Control Act & Regulations
• To carry out standing supervision as PE assignee as required under the Railway Protection Act during lifting operation
• Contract period is 14 month to cover the construction of an chinese temple at Plantation Crescent
• Contract start date: Tentatively Feb 2024
• Only 1 RE position to be filled

Remunerations:

• 2 months of gratuity will be provided upon completion of project
• Overtime is claimable, but overtime works shall be limited due to nearby residentail estates

Job Requirements:

• With valid RE certificate issued by IES
• Minimum 5 years working experience in building works supervision

(A) Job Summary:

The Building Engineer assists the Assistant Manager, Project in the project and construction management of dwellings, factories, commercial and other types of buildings and/or construction.

(B) Essential Job Functions:

• The Building Engineer is responsible, but not limited to, the following:
• Interprets plans, estimate costs and quantities of materials required.
• Assists in the development of Temporary Works’ Plan, design and drawings for construction projects.
• Assists in the tender process by providing technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Assists in the preparation and assessment of cost estimates and the documentation for tender/ contract bids.
• Develops and studies architectural and engineering drawings to ensure that all specifications and regulations are followed.
• Liaises with architects, engineers and other technical colleagues to ensure that the design intentions are met.

(C) Minimum Qualifications/ Job Experience:

• A Bachelor’s Degree in Science, Building or Engineering.

(D) Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

About the Role

• To Manage and Lead the Team to carry out planned preventive maintenance, corrective maintenance, and repairs as instructed by Manager.
• To provide support for events that are held in these facilities.
• To plan and effectively carry out Scheduled Facilities Planned Maintenance with 100% completion.
• To carry out site verification and provide related scope of work for inhouse / external vendors for recommendation and quotation.
• To work with Project Main contractor to address builder’s defects pertaining to the building and MEP system.
• To follow up all related administrative operation for PR/ PO for vendors to carry out the necessary rectification work.
• To ensure and follow up all necessary statutory certification / license renewal for all related MEP system.
• To ensure all MEP Plant Room system are in functional operation at all times.
• To coordinate and liaise with Venue Ops for all MEP system PM work timeline accordance to schedule.
• To collate and evaluate all reactive cases assigned by Manager and carry out necessary rectification or temporary repair/fix (when necessary) within a stipulated time.
• To assist the Manager to follow up on outstanding issue and case.
• To be activated at all-time 24/7 for any related urgent issue arise.
• To respond instantly and brief the team; in the event of an emergency, notify appropriate personnel and follow safety protocol.
• Ability to work independently without supervision from Manager.
• To actively lead the team in the absence of the Manager.
• To verify and conduct trending of all related MEP system in view for energy and water efficiency.
• To ensure operation of MEP equipment and events assign are 100% operational readiness.
• To assist the Manager for coordination in all events or issues assigned
• To coordinate and liaise with Manager in monitoring and controlling expenditures within the budget allocated.
• To acquire the knowledge of Microsoft Office to prepare and submit weekly and monthly document work and report.
• To ensure the team adhere to all workplace safety requirement.
• To lead and provide training to the team for all the MEP system on site.

About You:

• Nitec with Engineering or Facilities Management.
• Candidates with relevant prior work experience will be preferred.
• Strong team player with good interpersonal and communication skills.
• Able to works under minimal supervision, perform under pressure, proactive.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

- Provide top-tier technical support and quality information to car manufacturers, distributors, and Service Dealers (SD) to drive continuous product quality improvement.
- Support the establishment and management of SD network expansion in responsible territories, ensuring a seamless service experience for our customers.
- Conduct engaging onsite and virtual technical training and audits to SD, guaranteeing that repair capabilities meet and exceed company standards.
- Maintain and ensure the operational readiness of all repair equipment and diagnostic tools, enabling efficient service delivery.
- Offer ad-hoc support to automotive sales and related departments, contributing to the overall success of our automotive business.

An Infrastructure Engineer (IE) is responsible for designing, building, deploying, and maintaining the IT infrastructure using the latest technology for our Customers as well as internal in house systems. An Infrastructure Engineer requires all the IT systems that support businesses of any size to function efficiently. Infrastructure here includes Internet connectivity, security, cabling, servers and networking, virtualization platforms, storage area networks and any infrastructure related technologies.

With the expertise, Infrastructure Engineers ensure all of the systems within an organization function seamlessly. They work on site or remotely by evaluating all the systems within an infrastructure. Engineers may also be required to interact with all vendors on behalf of the customers or company concerning the infrastructure.

Infrastructure Engineer should be knowledgeable about network and security concepts, SAN technology and storage, and tuning techniques and system performance configuration and they should have exposure to networking in Windows server and Linux, TCP/IP environment, virtualization technologies, and OS performance monitoring.

Infrastructure Engineer needs good communication skills and must be able to work collaboratively with clients and other technical colleagues. Individuals work across all functional areas of the Company and use a strong customer service orientation to ensure that all service requests and incidents are resolved in a professional manner. They share their expertise and provide individual training and support to their technical colleagues within TSG. Infrastructure Engineer works with other technical staff and vendors to provide IT services to all our customers.

Your job duties will include but not limited to:

· performing installation, configuration, administration, migration, maintenance, tuning, troubleshooting, patching and upgrading of the IT infrastructure;

· managing technical deliverables of any projects and determine deployment strategy with the Project Managers;

· assisting Project Manager to create project plans, project roles and responsibilities, tracking and reporting project status. Communicating delays and issues;

· producing, delivering, and maintaining appropriate documentation for systems in accordance with document control standards and procedures;

· attending to pre-sales call to conduct scooping and customer site evaluation, if any;

· assisting sales in proposal preparation and technical write-out including drawing, if any;

· researching for solution and proposed appropriate solution to enhance / resolve customer’s pain points;

· ensuring customer’s satisfaction is highest at all time

· monitoring and performing capacity and feasibility studies and resolve system related issues.

· providing assistance for the reduction in volume and mean time to recover incidents in your business unit by providing high-level, independent trouble shooting on technical issues;

· providing assistance to Technical Recovery plans, and taking part in technical recovery for major incidents within your defined area;

· working and cooperating with internal and external groups when required in order to fully support environments and maintain service;

· adhering and contributing to the definition and implementation of operating procedures and operability on new and existing systems, ensuring adherence to defined operations standards;

· adhering to change management procedures in defining, planning and implementing change in such a way that ensures appropriate coordination with other teams, minimizing service disruption, and ensuring adherence to Service Level Agreements;

· collaborating with business, third party vendors, developers, application support and technical operations groups to determine appropriate hardware/software needed and to resolve any issues impacting the application processes;

· staying abreast of recent developments in related technical community, including new technology and business news that may impact vendors’ ability to provide service;

· seeking out all information and to fully understand all aspects of each device’s technology configuration and all uses;

· approving engineering tools available to implement conforming changes;

· packaging, company approved hardened versions of targeted operating systems;

· ensuring stack of agents for management systems are properly installed and connected; and

· maintaining patch levels in accordance with change management and security standards.

· Any other tasks assigned by the respective Team Managers and Directors

Requirements

• Minumum 3 years' experience
• Bachelor's degree
• Professional qualifications such as Microsoft 365 Certifications
• Additional qualifications such as CCNA Routing and Switching, ; and/or CCNA Security; VCP in Data Centre Virtualization will be an added advantage
• Must have strong knowledge of enterprise backup solution such as Symantec, CommVault etc.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

This is a one-year contract role.

Internal Code: A25001

What will you do?

• We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.
• We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.
• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

Fun working environment

Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

This is a one-year contract role.

Internal Code: A25001

What will you do?

• We adopt an Agile development approach and work towards tech best practices and cutting-edge tools.
• We are looking for software quality engineers who are passionate about improving the quality of the Government services provide. You will be part of an in-house team tasked with developing and maintaining the citizen disbursement system.
• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Performance/security testing
• Familiar with Java
• Create, maintain, and improve the automated test framework and test environments.
• Conduct testing on new features and file defects.
• Perform various tests such as manual/functional/performance/exploratory tests support UATs.
• Assist in resolving production cases.
• Participate in all agile ceremonies.
• Leadership experience

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering, or infocomm-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Experience in Python
• Experience in performing API Testing
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration, and continuous delivery
• Experience with open-source automated testing frameworks (Robot, Appium, Selenium)
• Enterprise level testing tools (HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage.
• Excellent verbal communication skills
• Proactive, self-driven and self-motivated

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.