Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural design and excellent delivery of service to clients.

• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports

Reporting to General Manager, Sales & Marketing, this position will play a key role in driving our sales and marketing strategies focusing on technical support initiatives for global and Japanese customers. This role involves orchestrating joint trials, crafting technical proposals, and resolving complex issues. Additionally, the role will mentor and support technical executives within the Sales & Marketing division.

Responsibilities:

• Forge strategic alliances with Research & Development (R&D) team in Japan Headquarters (HQ) and counterparts from other countries to drive application and market expansion initiatives through thorough understanding of customers’ needs in global and Japanese markets
• Conduct in-depth analysis of market trends and competitive landscapes across global markets to formulate technical strategies tailored to diverse markets
• Deliver exemplary technical services to our global clientele, including Japanese customers and business partners for commercialization of polyolefin, polyethylene and other chemical products
• Devise and execute impactful marketing strategies, including innovative sustainable solutions, to elevate the company's brand and products presence and market value

Requirements:

• Bachelor’s Degree in Chemical Engineering/Polymer Science with 12 to 15 years relevant working experience
• In-depth knowledge in polymer and packaging industry related to m-LLDPE/HDPE/PP
• Proficient in Japanese language to liaise with counterparts from HQ in Japan
• Strong understanding of Japanese market and culture
• Highly self-motivated, meticulous, independent and resourceful
• Strong leadership and communication skills and an effective team player
• Effective customer orientation
• Able to travel within short notice when required

• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

Perform mechnical & piping design review, technical agreement review and other engineering related matters for new building and conversion projects

Job Requirements or Responsibilities

• To support project in addresings engineering issues involving designers and classifications.
• To perform TA review in accordance with the contractual requirement and review schedule.
• To conduct an integration meeting involving pertinent parties for the purpose of design integration.
• To scrutinize all drawings received from supplier and designers, and provide comment as per contractual requirements, rules & regulations and operational practice

Key Responsibilities

• Lead AM materials development, manage projects involving multiple stakeholders. Use materials-process-performance research methods to investigate, solve, and deliver project objectives.
• Lead metal AM application and parts development projects including parts selection, design, prototyping and manufacturing
• Operation of metal AM machines and auxiliary equipment, including maintenance troubleshooting, and risk assessment
• Execute customer projects using AM materials and applications knowledge, to meet project deliverables and deadlines. Support in FEM simulation for DfAM.
• Provide technical support for addressing technical inquiries related to the development process, quality assurance, and analytical problems.
• Produce technical reports and presentations for AM project development

Job Requirements

• Masters/PhD in Engineering, Mechanical/Materials or equivalent
• 5-7 years of working experience with AM materials-process-performance characterization and analytical tools.
• Experience in LMD and/or L-PBF machine operations
• Proficient in 3D modelling and 2D drawing using Solidworks
• Experience in CAM and Siemens NX
• Experience in FEA/FEM
• Strong understanding of LMD process and materials, key process variables.
• Experience with parameters development, material characterization methods
• Experience with LMD machine operation
• Proficient in statistical tools like DOE
• Familiar with metal AM process chain
• Able to work independently and self-motivated

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with Sales Manager and Director to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 2 years in marine or oil and gas industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with valves and pumps or piping solution.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities

• To be the liaison for the coordination of M&E works to ensure works are carried out as per schedule and local authorities’ quality standard.
• To supervise and ensure that work done are in accordance with the required drawings and specifications as per the contract.
• To monitor closely and report promptly work progress to superior.
• Coordinate and prepare technical submissions with sub-contractors and suppliers to ensure timely work arrangements.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Diploma in Civil Engineering/Building Construction/Mechanical Engineering or any equivalent qualification or relevant on-the-job experience are welcome.
• More than 3-years of work experience in the Construction sector would be preferred.
• Good team player and able to work independently.
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

§ Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

§ Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

§ Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

§ Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

§ Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

§ Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

§ Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

§ Ensure non-conformity report is being raised as and when necessary.

§ Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

· Assist Sales / project team in Technical and Engineering support

· To execute Sales/project coordination and report to Sales/Project Engineer

· To execute production order and co-ordination with internal department and customers

· Liaise with customers on technical analysis, engineering calculation and submission

· Troubleshoot and able to service electronic / mechanical faults on equipment.

· Ensure all work complies with industry standards, codes, and safety regulations.

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

We are looking for a Generative AI Innovation engineer with keen interest in nation-wide initiatives.

• Be a part of the innovation team from a leading industry of Singapore's GDP.
• Attractive Remuneration Package.
• Hybrid work arrangement.

Responsibilities:

• Designing, developing, and implementing generative AI models and algorithms utilizing state-of-the-art techniques such as GPT, VAE, and GANs.
• Collaborating with cross-functional teams to define AI project requirements and objectives, ensuring alignment with overall business goals.
• Conducting research to stay up-to-date with the latest advancements in generative AI, machine learning, and deep learning techniques and identify opportunities to integrate them into our products and services.
• Optimizing existing generative AI models for improved performance, scalability, and efficiency.
• Developing clear and concise documentation, including technical specifications, user guides, and presentations, to communicate complex AI concepts to both technical and non-technical stakeholders.

Requirements:

• Degree in Computer Science or equivalent.
• Experience in developing and implementing generative AI models, with a strong understanding of deep learning techniques such as: GPT, VAE, and GANs.
• Proficient in Python and have experience with machine learning libraries and frameworks such as TensorFlow, PyTorch, or Keras.
• Familiar with cloud-based platforms and services, such as AWS, GCP, or Azure.
• Experience with natural language processing (NLP) techniques and tools, such as SpaCy, NLTK, or Hugging Face.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J51139 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.