Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.
• 5.5 days work week

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company, and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

The Inside Sales Engineer work closely with External Sales members as one of the main contacts for customers regarding product and services inquiries. The role involves managing customer inquiries, preparing quotations, ensuring smooth coordination with other departments and maintaining strong customer relationships.

This role will be based in Singapore, is part of the Sales Department ( Internal Sales Team ) and reports to the Customer Experience Manager.

The main tasks and responsibilities are:

Collaborative Sales Approach

• Partner closely with all stakeholders to serve customers effectively and meet team sales targets.
• Respond promptly to customer inquiries via phone, email, or other communication channels.
• Build and maintain long-term relationships with customers.
• Promote Digital Sales business

Sales Support

• Coordinate with external sales teams to close sales opportunities.
• Prepare and follow up on quotations and proposals.
• Work with External Sales to ensure correct pricing, delivery timelines, and terms arrangement with customers.
• Verify customer Purchase Orders, convert quotations into sales orders, and process orders using the SAP system.
• Collaborate with the supply chain and operations teams to ensure timely delivery of products and services.
• Monitor and update customers on order status and delivery schedules.

Cross-Department Coordination

• Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations.

Basic Technical Support and Problem-Solving

• Understand and interpret technical requirements for products, projects and services.
• Liaise with Application Consultant teams to provide accurate solutions to customer enquiries and challenges.

Customer Service and Problem Resolution

• Deliver exceptional customer service, build strong relationships, resolve problems, and address complaints effectively.

Additional Responsibilities

• Perform any other tasks required by the Company to support its business strategy.

Requirements

· Diploma or Degree in any Engineering related discipline or equivalent

· Minimum 2 years’ experience as Inside Sales or Project Proposal

· Experience in Instrumentation and Automation/Control Engineering environments would be an advantage

· Relevant Technical knowledge (Would be an advantage)

· Enthusiastic, dynamic, and customer-oriented personality

· Systematic and meticulous

· Strong ability to work effectively within a team environment.

· Ability to handle multiple tasks simultaneously and prioritize effectively.

· Excellent communication skills, both written and verbal.

Shangri-La Rasa Sentosa, Singapore

We are looking for a Shift Duty Engineer to join our team!

As a Shift Duty Engineer, we rely on you to:

• Manage, coach and supervise the engineering technicians
• Ensure all equipment runs smoothly at all times
• Carry out and prioritise emergency work requests
• Support engineering projects through planning, supervision and execution
• Support the audit and training programmes
• Running shift to ensure smooth operations
• Be part of the Emergency Response Team

We are looking for someone who:

• Has a passion for Engineering
• Preferably has experience in electrical engineering, building maintenance and repair
• Willing to work shifts
• Has experience as a Duty Engineer or equivalent in a hotel
• Has relevant experience with Building Maintenance
• A motivator and a self-starter

We Offer

• 5-day work week
• Learning and Development opportunities for career development
• Medical and insurance coverage
• Special employee discount within Shangri-La Group
• Duty Meals and shuttle bus provided

If you are the right person, what are you waiting for? Click the apply button now!

Job Description:

- Plan, organise and execute the quality assurance activities at in-process and final QA process stages

- Prepare acceptance test plans and work instructions for the inspection and test of the first article and series MRO (Maintenance, Repair and Overhaul) units

- Plan and execute acceptance tests for first article and series production units

- Identify special skills and special test equipment that are to be made available or acquire for acceptance of the products

- Identify and evaluate quality problems, relating to the product, process and quality system, to initiate, recommend or provide solutions

- Initiate actions to prevent the occurrence of any non-conformity relating to the product, process and quality system

- Conduct failure investigation, monitor and ensure closure of corrective/preventive action

- To perform inspection of MRO units

Job Requirements:

- Diploma/ Degree in Mechanical Engineering with basic hydraulic knowledge

- Possess Class 3 driving license

- Knowledge of military vehicles or armament will be added advantage

- Willingness to work in workshop environment

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Project Description:

Our client is the corporate and investment banking arm of The Group, world’s 12th largest bank by total assets.
We work daily with international branches located in 30 markets by:
- Envisioning and preparing the Bank’s futures information systems
- Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
- Providing premium In-house Banking applications,
This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.
We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

We are seeking a talented Software Engineer with a strong aptitude for programming to join our dynamic Capital Market Department!

In this role, you will contribute to projects and possesses capability to make breakthroughs in design, development, testing, debugging and implementing software applications or specialised utility programs in support of end users' needs on platforms.

Capital Markets IT involves technology solutions and systems used in financial markets for trading, investment, and related activities. This includes electronic trading platforms, risk management systems, market risk, counterparty risk, algorithmic trading, data analytics, and Regulatory measures. The use of advanced technologies like API’s, artificial intelligence and cloud solutions are also becoming increasingly prevalent in capital markets to enhance efficiency and decision-making processes.

The department is responsible for development and maintenance of Capital Market IT applications (in-house and package) used worldwide, covering Front Office (Murex, Apex, Orchestrade…), Back Office (Summit, Calypso…), Market data referential (Asset Control..), Market Risk (in-house application on big data technologies).

The Foreign Exchange (FX) IT division, works across the full value chain to sustain business activity and enable its acceleration.

This role aims to develop on the Calypso back office package, in project mode as well as maintenance, and to support the “run the bank” function. It requires a deep understanding of the nature of business operations, timing of activities & data flowing through internal and external systems. The build and support team continuously works with business users, infrastructure engineers and system managers.

Responsibilities:

• Research, design, and develop computer and network software or specialised utility programs. Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Identify and resolve issues which have organisation wide and long-term impact. Identify security risks, creates requirements to capture security issues, and performs initial threat modelling to ensure coding standards meets security requirements
• Develop and maintain the software configuration management plan and oversees the building, verification and implementation of software releases. Provide guidance and technical support to the quality testing teams.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Collaborate with cross functional teams (business analysts/ support teams… ) to ensure smooth integration of new features and updates and troubleshoot, debug, and resolve application-related issues
• Stay updated on industry trends, emerging technologies, and regulatory changes relevant to capital markets.
• Participate to proof of concept for new technology R&D
• Contribute to continuous improvement and automation by leverage your programming skills to create custom tools and scripts that automate repetitive tasks and reduce manual effort.
• Develop scripts and automation tools using Python, shell scripting, and other basic programming languages to streamline processes and improve efficiency
• Engage and support others in the team, readily put forth his ideas in a clear and compelling manner.
• The candidate should have analytical and problem solving skills, a pro-active mind-set in security, proven ability to work individually under pressure. Team player with good interpersonal skills. Very good communication skills and keen to work with business users.
• Collaborate with computer hardware engineers (CAGIP and ITS) to integrate infrastructure constraint (whether in-premise or cloud) hardware and software systems aligned with capacity, develop specifications and performance requirements.
• Build management:
- Develop in JAVA for Calypso v14.4 package.
- Develop internal components.
• Incidents and Requests management (business users and other IT teams)
- Communicate effectively.
- Analyse enhancement requests and bug-fixes.
- Document deliveries.
• Change Management
- Apply monthly release strategy, following the team’s milestones for analysis, coding and testing.
- Support the release roadmap in production.
- Operations management
- Application support, level 3 (expert).
- Troubleshoot and fix issues.
• Continuous improvement
- Process improvements.
- Coach more junior team members as required.
• Research, design, and develop software.
• Analyse user needs and develop software solutions
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with other engineers to integrate hardware and/or software systems
• Develop specifications and performance requirements

Mandatory Skills Description:

• 7+ years of relevant working experience
• Experience in supporting capital market applications and trading systems, ideally within the dynamic landscape of Market Risk/Front Office operations with a commendable grasp of financial products (Treasury, FX, Credit, IRD, Bonds, RSF etc.)
• Expertise in Calypso Back office functionality with hands-on experience in customizations of different Calypso modules:
- Custom Remote Services
- Engines
- Events
- Filters
- Reporting Framework
- ScheduledTask
- Message / Swift messages
- Transfers
- Settlement Delivery Instructions
- Accounting
- Pricers
- Workflows
- Reconciliation functionalities
• In depth knowledge of Confirmations, Settlement, Position and Accounting modules.
• Understanding of financial assets (FX, Treasury products, repos, bonds, SLB, issuances) and trade lifecycle.
• Experience with regulatory reporting HRF, NORIA, MMSR.

• Excellent communication and interpersonal skills to effectively collaborate with diverse teams.
• Excellent problem-solving and analytical skills.
• Ability to work under pressure.
• Appetite to follow technology trend and participate to communities.
• Eagerness to learn and adapt to new technologies.
• Strong perseverance and diligence towards attaining goals and effective time management
• Passion for sharing expertise and grow team members’ skills.
• Autonomous, self-motivated and excellent team player

Nice-to-Have Skills Description:

• Domain-Driven design and Microservices: springboot
• Exposure to Capital Markets applications
• Hands-on experience in implementation projects.

• Provide pre-sales and after-sales support to all HVAC/ACMV projects.
• Manage the Service Team in executing project plans, timelines, cost preparations and resources requirement.
• Provide technical support and clarifications to the Customer Service in producing comprehensive quotations to the clients.
• Address and resolve project administrative issues that may arise during project execution.
• Liaise with vendors and suppliers to prepare necessary equipment required for the project.
• Actively follow-up and resolve customer service-related issues / concerns.
• Attend internal and external meetings with stakeholders to resolve service operational matters.
• Oversee project execution and ensure service completion are within schedule.
• Ensure off-site operations are scheduled in accordance with customers' requirements.
• Ensure customers' requirements are clearly coordinated and communicated with the Service Team.
• Conduct site survey to accurately plan and allocate manpower resources for all Service jobs.
• Ensure Service projects are in compliance with all internal and project site SQE rules & regulations.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / ervice & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a highly motivated and skilled Project Engineer to execute site engineering projects. This role involves managing both process and non-process-related projects, such as Technology Transfer/New Product Introductions and Capital Projects (typically <$5M). The successful candidate will ensure these projects meet safety, quality, and technical requirements while maintaining alignment with corporate and site standards.

Key Responsibilities

• Collaborate with cross-functional teams (e.g., manufacturing, facilities, engineering, process development, and quality assurance) to successfully implement engineering projects.
• Oversee all phases of project execution, including initiation, change control, design coordination, procurement, construction, commissioning, qualification, and close-out activities.
• Ensure projects comply with corporate and site engineering standards, including Environmental Health & Safety (EHS) requirements.
• Lead safety initiatives such as pre-job safety briefings, permit management, contractor risk assessments (e.g., JHAs), and HAZOP reviews.
• Act as the technical lead for site capital projects, providing oversight of design, vendor, and contractor submissions.
• Partner with document controllers to ensure timely updates and compliance with document management SOPs.
• Support document archiving in the Amgen document management system.
• Utilize critical thinking to troubleshoot and solve complex issues efficiently.
• Leverage tools such as MS Project, SharePoint, Smartsheet, and Excel for project tracking and management.
• Represent project milestones and updates in daily cross-functional meetings.
• Manage all aspects of projects, including planning, budgeting, scheduling, risk management, resource allocation, and post-project follow-up.
• Identify and address high-priority risks proactively during project execution.
• Collaborate with external stakeholders such as engineering firms, construction management teams, and vendors to ensure seamless project delivery.
• Build strong relationships with internal and external partners to foster a collaborative working environment.
• Execute multiple projects simultaneously in a dynamic, fast-paced setting while maintaining high-quality outcomes.
• Demonstrate learning agility and technical leadership by breaking down complex challenges into actionable plans.

Required Qualifications

• Master’s degree with 3 years of experience in Engineering or Project Management.
• Bachelor’s degree with 5 years of experience in Engineering or Project Management.
• Engineering background with expertise in cGMP manufacturing and utilities projects for Biotech/API plants.
• In-depth knowledge of biotech/API manufacturing processes and supporting functions.
• Certifications in Project Management and Safety (e.g., WAH Manager).
• Proficiency in commissioning and qualification of GMP equipment and automation systems.
• Familiarity with regulatory environments (e.g., cGMP, OSHA, EPA).
• Excellent communication and facilitation skills to build consensus among stakeholders.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Leads multiple project teams of other software engineers and firmware engineers, including internal and outsourced development partners responsible for all stages of design and development for complex products and platforms from NPI through Sustaining.
• Manages and expands relationships with internal and outsourced development partners on Software applications, firmware design, and development.
• Provides domain-specific expertise, overall software and firmware leadership, and perspective to cross-organization projects, programs, and activities.
• Specifies and documents workflows, engagement models, and objectives in partnership with other WW Software and Firmware teams.
• Collaborates with hardware engineers to ensure proper integration and communication between hardware and firmware components.
• Mentor less-experienced software and firmware engineers and help guide them to successful deliverables.
• Communicate program progress, escalations, and issue analysis to key stakeholders and executives.
• Identify areas of improvement in executing defined solutions and define path-forward actions.
• Communicate program progress, escalations, and issue analysis to key stakeholders and executives.

• Bachelor's degree/Master's in Computer Science, Computer Engineering, Software Engineering, Information Systems, Electrical Engineering, or equivalent.
• Minimum 5 years of experience in Embedded Systems/Firmware Development or relevant industries.
• Experience with multiple software/firmware design tools and languages, such as C, C++, Java/Javascript/Python, etc.
• Evaluating forms and processes for software/firmware testing and methodology, including writing and execution of test plans, debugging, and testing scripts and tools.
• Experience in CI/CD and Agile or other equivalent modern development methods.
• Experience in overall architecture of software/firmware and interaction with hardware/software/OS designs for products and solutions.
• Excellent analytical, problem-solving, and communication skills.
• Ability to effectively communicate program plans, proposals, and results, and negotiate options at senior management levels.

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

JOB RESPONSIBILITY

• Responsible for building and facility services, system operations and maintenance program
• Ensure all the works are carried out safely and in accordance with safety work procedures
• Oversees the Building Automation System (BAS) and other systems within the BMS/BASCO/FRC room, including ensuring the smooth operation (within the acceptable limits and are run safely, effectively and economically) and timely rectification of the M&E equipment and responding to all alarms as part of the drive to achieve KPIs.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM) using the CMMS (Computerized Maintenance Management System) to the maintenance staff accordingly.
• Lead the coordination and communication process of rectifying the faults between the maintenance staffs, vendors and contractors.
• Manage a team of technicians in attending to breakdown calls.
• Responsible to undertake maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Develop working schedule / duty roster for the team.
• Ensure all building and facility systems are operational within the acceptable limits and are run safely, effectively and economically
• Responsible for conducting preventive and corrective maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Liaison with OEM /system contractor for all building services & regularly solicit feedback from maintenance staff regarding fault status and feedback to users.
• Assists in Business Continuity, Emergency Operations and Exercises such as Fire Drill/Evacuation exercise, major equipment breakdowns, major power shutdown, disease outbreak and incidents where deemed to be of top priority. Activates Recall protocol for emergency situation.
• Provide feasible solution and coordinate with owners/users, consultants, vendors/contractors on engineering function requirement
• Conduct regular inspection of existing building equipment and its serviceability status
• Review service reports and escalate any finding or action that is required
• Assist in the Development, maintenance and the regular review and test of SOP/EOP
• Advice and lead the technical investigation / troubleshooting for rectification works
• Investigate and determine root cause of faults and report
• Prepare and submit regular reports to Management and Customer, with analytical findings and propose improvements.
• Provide training to technician /technical officers, and junior staff as necessary
• Undertake any ad hoc assignment requested or delegated by the AFM/FM as required for the operational needs
• Senior Grade level would have the below additional job responsibilities & deliverables:
  Participate in Ops Meeting and ensure follow-up items for BASCO issues (campus level) are closed in a timely manner.
  - Chairs BASCO Trade meetings with NUH Customer on a regular basis and to follow-up with delegation of tasks to ISS team to ensure completeness in follow-ups.
  - Lead the planning for BASCO coverage at assigned building and on campus wide for CERT requirements
  - Overall accountable for training and uplifting the competency and familiarity of BASCO team members on-site.
  - Target to reduce 15% month-on-month of Open RM items, by proposing practical solutions for customer to implement.
  - Perform on-boarding program for any new joiners to BASCO Team at NUH ISS. This can be done on a fixed-monthly frequency including existing staff as part of the refresher training.
  - Overall visibility & control of the BASCO team & performance at site. Key target is to hold internal bi-monthly meetings and foster camaraderie and team bonding among the team. Target is to establish full contractual compliant BASCO team and achieve 95% attendance rate.
  - Oversee and report the Emergency Recovery Equipment list at a cluster level and on a predefined frequency to ensure all equipment are operational functional and readiness.
  - Overall BASCO Lead during working / Shift Hours and leads in handling any key events / incidents, while working closely with other BASCO team members across the campus for manpower deployment, cross-support or coordination works.

JOB REQUIREMENT

• Degree in Mechanical Engineering / FM discipline with minimum 3 years experience; or Diploma in Mechanical Engineering / FM discipline with minimum 5 years of relevant experience;
• Preferably minimum 2-3 years of working experience in a facility management environment in a hospital / clean room / pharmaceutical will be preferred.
• Pro-active, ability to prioritize work and achieve desired result
• Independent, able to work with minimum supervision and have a good understanding of critical workflow
• Able to communicate and write well in English and Mandarin
• Able to work on Monday to Friday (Shift 1) 0700-1600 Hrs (Shift 2) 1100-2000 Hrs; Saturday 830am to 1230pm.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.