Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as a global technology, defence and engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Join our team of highly motivated individuals in the engineering cutting edge solutions that unify both cybersecurity and productivity. As our Cyber Security Product Engineer, you will join a team of specialised engineers to deploy, configure and support our indigenous and robustness cybersecurity products.

Job Description

• Participate in the product and project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Understand customer’s requirements and transform to technical control & technical solution
• Install, configure and upgrade Cyber Security Products
• Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems on the customer's site
• Liaise with vendors and internal team for resolution solutioning for problems encountered.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the ICT infrastructure.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.
• Create, oversee and test system integration and security requirements (e.g. system integration test plan, system security acceptance test plan).
• Review findings from vulnerability assessment and penetration testing.
• You will learn system and cyber security knowledge with the team.

Requirements

• Possess 5-7 years of similar experience
• Familiar with cyber security products and project implementation
• Possess networking knowledge
• Possess basic knowledge in Linux
• Soft skills – Problem Solving, Communication and Teamwork Skills
• Singaporean only
• Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Coordinate equipment and process validation execution, data collection and summaries.
• Perform documentation and release technical requirements/ drawings, write, review or update work instructions for engineering and consumables production lines.
• Assist in MES ticket and process verification/ validation activities.
• Assist Process Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to new product development, yield, quality and throughput.
• Recommend and assist in implementation of improvements in a production environment to meet goals across multiple operations and technologies.
• Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.
• Support with Engineering/ R&D teams to develop processes for new products and improve processes of existing products.
• Supports nonconforming material analysis and investigations.

Qualifications:

• Possess good understanding of manufacturing process and regulated biotech or medical devices manufacturing environment.
• Capable of executing test plans for components, materials, systems and processes.
• Competent in Microsoft word, excel, powerpoint
• Knowledge in product & process feasibility study, line validation, qualification and optimization to production
• Excellent team player, interpersonal and communication skill.
• Well-developed documentation and technical report writing skills
• Able to work well under stress, both internally and across functions and perform multitasking.
• Proactive, innovative and self-motivating.
• Team player with strong focus on safety, quality and timeline.
• Diploma/ Bachelor in Engineering, Sciences or related field
• Experience in manufacturing/ FDA-regulated environment is a plus.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Key Responsibilities

• Fast development of analog IC physical designs, including layout drawing, DRC, LVS

• Layout extractions and analysis for IC designers

• Develop analog and/or digital library cells in various technologies (e.g. CMOS & SOI)

• Layout digital cells for various trade-offs (including speed, power, area, reliability)

• Layout analog circuits and IO circuits

• Characterize digital cell cells for timing and power analyses

• Construct test structures for validating various digital and analog cells

• Layout integration and optimization

• Advise IC designers for best layout practice

• Work with the IC design team to deliver IC physical designs

• Support the team lead for layout design integrations

Minimum Requirements

•Degree in electrical engineering or related field

• Strong experience in analog physical design, particularly bandgap, amplifier, comparator, LDO, current sensing, power switch, etc.

• Proficiency with industry-standard tools such as Cadence, Spectre, HSPICE, and Matlab

• Familiarity with CMOS, BiCMOS, and other process technologies

• Excellent problem-solving skills and ability to work in a fast-paced startup environment

• At least 3-year experience of analog layout design with at 2 IC product tapeouts.

• Some understanding of circuit analysis and implementation

• Strong expertise in power management including DC/DC converter design.

• Able to do design verifications

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.