Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.

Job Description:

• Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.
• Develop specific Lift Plans.
• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.
• Prepares procedure in coordination with vendors for internal shifting and load out operations.
• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.
• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.
• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.
• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.
• Resolve any technical problems or issues faced at the work site
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Job Requirements:

• At least 8 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

Roles:

-Interpretation and analyze of production drawings & documents.

-Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

Job Description:

• Read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Manage a team of Superintendents, Supervisors, including work schedules, project progress and resource allocation.
• Manage & chair day to day VSCC (Vessel Safety Coordination Committee Meetings).
• Assist in providing cost estimates for labour, supplies, materials and other project costs.
• Collaborate with clients, Project Managers, other construction management to determine budget and timeline.
• Coordinate materials and equipment delivery with vendors and suppliers.
• Create schedules for workers and subcontractors.
• Work closely with commercial team and forecast Subcontractor’s requirements and assign scopes accordingly.
• Maintain a daily log for the job site’s operations, reporting to management as necessary.
• Make changes in the operation as necessary to best met construction deadlines.
• Implement management techniques that are cost-effective and efficient.
• Prepare day to day reports & update project master schedule.
• Conduct weekly internal production meetings & Weekly client – shipyard interphase meeting.
• Prepare meeting minutes and disseminate every week to all personals related to the assigned project.
• Maintain project variation order records, technical query records, Drawing transmittal records and disseminate weekly.

Job Specification

• Bachelor’s / diploma in Mechanical or equivalent
• Minimum 5 years of working experience in Rig Construction & Shipyard experience
• Must possess MWSHSSR (Manage Workplace Safety and Health Ship building and Ship Repair)
• Must possess experience of working & managing Jack up rig upgradation / repair assignments in shipyard environment
• Excellent English command, including writing, speaking and active listening
• Proficient in MS Office applications (ie. Microsoft Excel)
• Knowledge of construction budgeting best practices and assist commercial team in preparing quotes.
• Good planning skills, including execution, resource allocation and manage contingencies
• Understanding of construction equipment, including safe operating practices and signs of maintenance issues
• In-depth understanding of MOM construction regulations
• Great problem-solving and decision-making skills
• Effective leadership abilities, motivate peers, set targets / goals and conflict management
• Organizational skills, including time management, delegation, prioritization and multitasking
• Willing to work in a challenging repair environment

• Support Project team in the coordination of project activities.
• Plan, schedule and manage the project efficiently and to ensure time completion.
• Ensure optimal utilization or resources of the Company and to work in accordance to safety standard and within project budget.
• Assist in day to day requirement.
• Follow up on the project progress.
• Execute all directions from managements.
• To raise Material Requisition Form (MRF) based on costing sheet provided but not limited to save project cost as much as possible without limiting result or quality of Genset delivered
• To discuss or consult with customer on delivery, installation and project related matter
• To coordinate project related work.

Job Description:

• Responsible for leading Pharma and Biopharma projects using DeltaV System or PLC Siemens with batch design (CM, EM, Phase, Recipe, etc)
• Responsible for design & managing system integrator and ensure they follow company standards and approved guidelines
• Responsible for managing internal stakeholders and coordination with various equipment owners to ensure their requirements are met in the PCS design and is implemented and tested in accordance with the company standards
• Responsible for reviewing functional specifications and design specifications and ensuring these are aligned with project, global and local standards
• Work with various teams to design system architecture, network architecture, cable schedule
• Responsible for reviewing test documents and protocols (FAT, SAT, Interface Test, etc.) so that they meet CSV and QA standards
• Responsible for participating in design meetings at various vendor locations
• Responsible for witnessing FAT’s and interface test at various vendor locations
• Work closely with qualification teams to support qualification test generation and execution efforts in IQ, OQ and PQ
• Support FAT, SAT, IQ, OQ and PQ

Job Requirement:

• Minimum 10 to 15 years of Relevant Experience.
• Expert in Development Tools - RSLogix5, RSLogix500, RSLogix5000, Studio5000, RSLinx,
• Experience in Industrial Protocols - Modbus, Modbus TCP, HART, Ethernet IP, OPC UA, OPC DA, ControlNet, Device Net, Industrial control protocols such as RS232/485.
• Expert in ControlLogix Logic coding Languages - (ST, FBD, SFC, Ladder)
• Database & Reporting - MS SQL Server, Crystal Report, and SSRS, VB & Excel based Report.
• SCADA - FactoryTalk View & Historian, Siemens WinCC, Ifix, Wonderware, Iconics, Schneider.
• Familiar with Industrial Protocols - Modbus, Modbus TCP, HART, Ethernet IP, OPC UA, OPC DA, ControlNet, Device Net, Industrial control protocols such as RS232/485, CAN/Open, Modbus RTU, traditional IO (4-20 mA, etc), Foundation Fieldbus, etc.
• Computer System Validation (CSV) 21CFR part11 (GAMP-5) using GMP &CGMP automation process industries.
• Good Knowledge and Min 5 years’ experience in regulatory Audits (US-FDA, MHRA, EU-GMP)
• Knowledge in Industrial Cybersecurity ISA IEC 62443 Standards.
• Experience on Automation Compliance projects Familiar with process controls equipment Strong knowledge of Computerized Systems, Compliance regulations and standards
• Hands on experience in IT application Infra Monitoring engineering tools - SevOne, Moogsoft, Dynatrace, Qualysys, MacAfee Trelix.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Construction company requires electrical engineer.

Job Highlights

• The job will offer you excellent opportunity for promotion.
• Good working environment.
• The Company has a broad market and good prospects for development

Job Description

1. Assist Sales Manager for the sales and marketing for local and overseas market and are required traveling overseas on regular basis to carry out duties.

2. Required to co-operate closely with all other department of the company in order for the contact and/ or project can be executed effectively and efficiently.

3. Assist Sales Manager decision making and overview the company daily operation to ensure the operation run smoothly.

4. Assist Sales Manager to preparing itinerary schedule before traveling to overseas, and contact to the person for arrangement for meeting.

5. Assist Sales Manager to monitor and ensure branch offices run smoothly for everything and keep report to the head quarter in routine basis.

6. Assist Sales Manager to prepare power point, company brochure, project reference etc. for presentation and generate commercial agreement and/ or technical agreement for meeting with clients.

7. Assist in decision making for procurement in searching, purchasing and negotiation of purchase and delivery terms of equipment and materials for production.

8. Able to read GA (general arrangement) to prepare material cost list and generate quotation, Technical specification, tender document etc. and reply to the enquiry of customer require.

9. Visit to the local shipyard frequently for gather more information on new project as well as the exiting project, and at the same time build up a good relationship between shipyard and the company.

10. Assist other Marketing related jobs not mentioned.

Job Responsibilities

• Design process and perform process calculations for water, wastewater treatment, air treatment projects.
• Design PFD, P&ID with Auto CAD independently or with the help of drafters.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and piping and ducting with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Prepare submissions of the process drawings and textual documents.
• Focus on deliverables and deliver the above-mentioned documents on time.
• Evaluation of technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Other ad hoc jobs.
• Report to engineering manager.

Job Requirements

• Minimum Qualification: Bachelor degree in environmental, chemical engineering or related engineering
• The candidate should be highly responsible for this role.
• A degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment. Master degree holders with less experience will be considered.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

Job Description:

• Responsible for leading Pharma and Biopharma projects using DeltaV System or PLC Siemens with batch design (CM, EM, Phase, Recipe, etc)
• Responsible for design & managing system integrator and ensure they follow company standards and approved guidelines
• Responsible for managing internal stakeholders and coordination with various equipment owners to ensure their requirements are met in the PCS design and is implemented and tested in accordance with the company standards
• Responsible for reviewing functional specifications and design specifications and ensuring these are aligned with project, global and local standards
• Work with various teams to design system architecture, network architecture, cable schedule
• Responsible for reviewing test documents and protocols (FAT, SAT, Interface Test, etc.) so that they meet CSV and QA standards
• Responsible for participating in design meetings at various vendor locations
• Responsible for witnessing FAT’s and interface test at various vendor locations
• Work closely with qualification teams to support qualification test generation and execution efforts in IQ, OQ and PQ
• Support FAT, SAT, IQ, OQ and PQ

Job Requirement:

• Minimum 10 to 15 years of Relevant Experience.
• Expert in Development Tools - RSLogix5, RSLogix500, RSLogix5000, Studio5000, RSLinx,
• Experience in Industrial Protocols - Modbus, Modbus TCP, HART, Ethernet IP, OPC UA, OPC DA, ControlNet, Device Net, Industrial control protocols such as RS232/485.
• Expert in ControlLogix Logic coding Languages - (ST, FBD, SFC, Ladder)
• Database & Reporting - MS SQL Server, Crystal Report, and SSRS, VB & Excel based Report.
• SCADA - FactoryTalk View & Historian, Siemens WinCC, Ifix, Wonderware, Iconics, Schneider.
• Familiar with Industrial Protocols - Modbus, Modbus TCP, HART, Ethernet IP, OPC UA, OPC DA, ControlNet, Device Net, Industrial control protocols such as RS232/485, CAN/Open, Modbus RTU, traditional IO (4-20 mA, etc), Foundation Fieldbus, etc.
• Computer System Validation (CSV) 21CFR part11 (GAMP-5) using GMP &CGMP automation process industries.
• Good Knowledge and Min 5 years’ experience in regulatory Audits (US-FDA, MHRA, EU-GMP)
• Knowledge in Industrial Cybersecurity ISA IEC 62443 Standards.
• Experience on Automation Compliance projects Familiar with process controls equipment Strong knowledge of Computerized Systems, Compliance regulations and standards
• Hands on experience in IT application Infra Monitoring engineering tools - SevOne, Moogsoft, Dynatrace, Qualysys, MacAfee Trelix.

1. Design and Development:

• Conceptualize, design, and develop mechanical components and systems for Maxiton's refuse compactors and related equipment.
• Conduct structural and functional analysis to ensure designs meet performance, safety, and regulatory standards.
• Collaborate with cross-functional teams (electrical, software, and manufacturing) to integrate smart technologies into mechanical systems.

2. Prototyping and Testing:

• Create and refine prototypes, ensuring alignment with technical specifications.
• Plan and execute testing protocols for durability, efficiency, and safety of mechanical systems.
• Analyze test data and implement design improvements to optimize product performance.

3. Manufacturing Support:

• Provide technical expertise to production teams to ensure seamless manufacturing processes.
• Develop and maintain detailed engineering documentation, including CAD models, drawings, and BOMs.
• Identify and resolve design-related manufacturing issues promptly.

4. Maintenance and Troubleshooting:

• Assist after-sales and customer service teams in diagnosing and resolving mechanical issues in the field.
• Recommend and implement design updates to improve reliability and reduce maintenance requirements.

5. Innovation and Research:

• Stay updated on industry trends, materials, and technologies to enhance product offerings.
• Contribute to the development of next-generation solutions, such as energy-efficient systems and IoT-enabled equipment.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering or related field.
• Experience: 2+ years in mechanical design, preferably in waste management, heavy equipment, or hydraulics.
• Technical Skills:Proficient in CAD software (e.g., SolidWorks, AutoCAD).
  Strong understanding of hydraulics, structural mechanics, and material properties.
  Familiarity with IoT or sensor integration is an advantage.
  
• Soft Skills: Excellent problem-solving, communication, and project management skills.

Qualification & Requirements

- Degree in Mechatronic or equivalent

- Min 5 years working experience in Marine Industry or shipyard environment.

- Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.

- Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).

- Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.

- Strong leadership with problem-solving skills. Added advantage with understanding in structural design.

- Teamwork: Ability to work effectively with all team members at all levels.

- Communication: Ability to communicate clearly and concisely in both Mandarin and English with team members, vendors, fabricator and clients.

- Ability to produce written report and presentation in English. Added advantage if such report and presentation can be in Mandarin.

- Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.

- Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

- The candidate must be willing to travel and work in marine and offshore environment.

Key Responsibilities

- Report to the Project Director / Manager in Charged of the WTW system.

- Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.

- Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.

- Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.

- Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.

- Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.

Develop operating, maintenance and safety procedures for the WTW system.

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 2 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

- Produce CNC design solutions for customize specification. Preferably with good technical design and engineering background.
- Produce design for automation
- Make drawings (2D & 3D) in CATIA
- Make parts explosion / BOM list using ENOVIA
- Documentation for fabrication
- Evaluation for design solutions
- Support production for machine modification design
- Do engineering presentations

Requirements:

- Diploma/ Degree in Mechanical Engineering
- Minimum 3 years related work experience
- 2D & 3D CAD operations; strong in CATIA
- Proficient in Microsoft ( Excel / words / power point )
- Independent and is a sound decision maker

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

We are seeking a skilled Observability Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Work location: Jurong East

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities:

• To cover design aspects for systems such as Radars, Navigation Comms, Integrated Comms, Integrated Combat Systems and Layout designs
• Work with other trades on integration design between Platform and Systems
• To prepare the General Arrangement Plan (GAP)
• Preparation of tender proposal and technical specifications for tender submission
• Establish Major Equipment Specifications and Selections
• To check and ensure equipment specification, technical information, functional description document, installation control document and interface design specification are correct and properly maintained, disseminate and use for the preparation of design work activities
• Planning and control of Basic design document schedule to support project milestone
• To develop of new designs and design concepts;
• To source for new design tools;
• To provide specialist technical assessment and analysis other in-house departments and external parties
• To continue updating the developing and expanding of the design database
• To participate in tests and sea trials, including HAT and SAT, where required
• Perform detail design calculation where necessary
• To follow up and resolve all the design issues raised by Owner, Classification and Statutory Authorities on all design documents promptly and timely to support the schedule, including on site checking and discussions
• To generate 2D arrangement drawings for major equipment
• To generate list of design drawing / document specific to each project
• To check working drawings and ensure that they conform to contractual technical specification, installation control documents, Classification and Statutory Rules/Regulations
• To keep abreast with current technological developments and products, Classification rules, military and industrial standards and other standards relevant to design activities.

Requirements:

• Degree in Electrical & Electronics Engineering
• 3 to 5 years of relevant experience in Marine related projects on Navigation Communications Systems and Radars (Fire Contol & Surveillance) will be advantageous
• Possess both project management and man management experience
• Ability to manage external and internal stakeholders will be critical for this role
• Proficiency in AutoCAD
• Only Singaporeans will be considered for this role

Additional Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628