Healthcare/Commercial Project

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in January 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in Preferably with experience in Hospital/Healthcare/Institution/Commercial developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in February 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in in additions and alterations of buildings/Commercial Developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.

The Technical Manager Service is responsible for the handling of all technical aspects of the service activities of the Company, in particular:

• Technical support of commercial service personnel and customers directly
• Service support, including commissioning of new equipment, repairs, modifications, warranty repairs
• Handling of warranty matters with customers and vendors in conjunction with the commercial manager service and 3rd parties such as classification,Societies and outside contractors
• Managing the workshop
• Managing a team of service engineers
• Support service engineers and customers with technical expertise
• Organising training and education of in-house and 3rd party personnel

In order to carry out these tasks, the Technical Manager Service

• Manages and maintains the company’s workshop
• Plans and manages the company’s equipment
• Supervises the company’s service personnel
• Coordinates activities with the company’s sales and service personnel

The Technical Service Manager should provide:

• the ability to approach and develop the After Sales Market for the company in accordance with the Company’s targets and policies
• good communication skills representing the company with customers, vendors and other organizations
• detailed and deep technical knowledge of the company systems and products
• good organizational skills in planning of service activities
• the ability to develop personnel

The Technical Manager Service participates in the planning of the relevant budgets

The position reports to the General Manager - service of the Company.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career. This role focuses on developing world-class engineering solutions that meet the unique challenges of biotech production.

In this position, you will provide support to Process Engineers in the characterization of new and existing products, maintaining and improving metrology tools, and ensuring process excellence in a high-volume biotech production setting. You will collaborate extensively with various departments including Manufacturing, Equipment Engineering, Analytical Sciences, Facilities, Supply Chain, and Quality Assurance to support new product releases and continuous process improvement.

Scopes & Responsibilities

• Assist Process Engineers in troubleshooting, sustaining, and continuously improving production lines for consumables related to new product development, yield, quality, and throughput.
• Design and execute controlled experiments to optimize processes, while documenting and analyzing results.
• Support MES ticket handling and process verification/validation activities.
• Conduct nonconforming material analysis and investigations.
• Recommend and implement process improvements to meet production goals across multiple operations and technologies.
• Coordinate execution of equipment and process validation, data collection, and report summarization.
• Collaborate with Engineering/R&D teams to develop and refine processes for new and existing products.
• Maintain and update technical documentation, including technical requirements, drawings, and work instructions for engineering and consumables production lines.

Qualifications

• Diploma or Bachelor’s degree in Engineering, Sciences, or related field.
• Experience in manufacturing within a FDA-regulated environment is advantageous.
• Strong understanding of manufacturing processes within a regulated biotech or medical devices environment.
• Ability to execute test plans for components, materials, systems, and processes effectively.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• Experience with product & process feasibility studies, line validation, qualification, and process optimization.
• Excellent team collaboration, interpersonal, and communication skills.
• Strong documentation and technical report writing abilities.
• Ability to manage stress and handle multitasking across functions effectively.
• Proactive, innovative, and self-motivated.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

JOB SUMMARY

Under general direction, the Technical Sales Manager is responsible for managing the technical sales aspects including segment, product line & technology packages, and all relevant technical supporting activities throughout the entire sales process. Successful activities include: collaborating within the sales organization on new customer opportunities, building strong customer relationships, technology training, collecting & analyzing customer/market insights to identify winning technology solutions, and supporting strategic sales growth initiatives. This is a key role within our organization advising and guiding the technical aspects of the sales process while working within a close collaboration with Global Technical Sales Managers (TSMs) to ensure alignment and leverage global insights and strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Build credible & strong relationships by focusing on:

• Advocating, coaching, and training for the segment, product line, and/or specific technology.
• Supporting sales growth opportunities, and proposal development, in a team selling approach with sales managers and sales support operations.
• Actively supporting sales activities: customer technology needs assessment, alignment with engineering standards, technology decision, product sizing, and strategic account planning.
• Face to face interactions with customers and identified markets we serve.
• Developing multiple relationships & communication pathways within a customer
• organization focused on Engineering and Plant Operations.
• Support conference strategies including technical presentations and booth support.
• Maintaining up-to-date understanding of industry trends and technical developments.
• Identifying opportunities & advise on available technology or service solutions.
• Clearly articulate Crown’s technology offerings and advantages.
• Obtaining and coordinating data and recommendations to Sales and Sales

• Segment and Product Line development:

• Collaborate with Global Segment Commercial Leads, Engineering, & other Technical Sales Product Managers to develop cohesive standard global product offerings.
• Develop & Manage standard product line sales tool-kits including sizing programs, sales flow diagrams, mass balances, and a library of sales presentations.
• Assist marketing collateral development on product lines and new innovations.
• Support technology discussions to close the deal in an efficient and professional manner.
• Deliver against sales goals by supporting Sales, Sales Support, & Aftermarket team members.
• Cross functional & global collaboration. Key technical tag for Aftermarket commercial support connecting inquiries into Sales & Engineering as needed.
• Deep understanding of technology/service value and total cost of ownership, TCO.
• Support new innovation launches with technical support & training.
• Contribute to all customer field reports after each customer visits.

• Develop testing protocols for customer piloting work as required.

• Perform other related duties as required and assigned.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in chemical, or mechanical engineering.

• Master’s degree preferred.

• 5+ years Engineering or Operations experience within the Oilseeds complex, preferably in an Oilseeds Crushing or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleochemical business.

• Demonstrated sales support experience.

• Strong Competitive desire to succeed & win.

• High integrity and ethics.

• Entrepreneurial spirit.

• Excellent written and verbal communication skills.

• Effective at problem solving and conflict resolution.

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Strong attention to detail.

• Technology advocate into customer focus.

• Establish and maintain effective working relationships with co-workers, customers, and vendors.

• Responsive to requests and inquiries from internal and external customers.

• Well-developed presentation skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, TEAMS and PowerPoint, SharePoint.

• Must be able to communicate in English fluently. Ability to communicate in a second language – European or Asian languages preferred but not required.

• Customer relationship management (CRM) experience a plus.

• Process Modeling experience – ChemCad, Aspen modeling a plus.

• Ability to travel internationally and domestically up to 25% of the time.

Job Responsibilities

• Respond to the recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment at Universal Studios Singapore (USS).
• Troubleshoot failed components using basic test equipment, schematics/prints, and specialized tools, equipment, and resources.
• Report to the Team Lead during the reset of Ride & Show systems to ensure safe operation.
• Support the Attractions Operations team in the safe evacuation of guests from ride vehicles during downtime.
• Operate company forklifts or specialized vehicles, such as high-reach boom lifts, when required for the recovery of rides and shows (training will be provided by the company).
• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.
• Log completion of inspections, corrective actions, and/or repairs made, including a list of applicable parts used.
• Generate required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or a related field of study.
• 3-5 years of experience in troubleshooting and repairing basic to moderately complex systems, including electrical/PLC controls, electro-mechanical devices, hydraulics, pneumatics, and mechanical equipment (experience in these areas will be an advantage).
• Strong ability to troubleshoot electromechanical problems and use good judgment in high-pressure situations.
• Ability to work at height.
• Willingness to perform 12-hour shift work, including permanent day shifts, weekends, and public holidays.

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge.
• To constantly monitor improve the department performance. To conduct periodic review of existing work flows and procedures, and make recommendations for improvements and executing the improvement plans.
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution.
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff.
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly.
• To implement and supervise correct EHS practices within the department.rnal departments on incoming waste discrepancy and revise related SOPs accordingly.ent.
• To implement and supervise correct EHS practices within the department.
• To work with resale for arrangement of recovered products to minimize the storage.
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely.
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations.
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency situation. To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time.
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely.

Secondary responsibilities

• To undertake any other tasks assigned by the Management from time to time.
• As an ISO committee member, to develop and implement documents for operation procedures, such as SOP, RA and MOC, SWP and participate in auditing the various departments as an Internal Auditor

Requirements:

• Degree in Engineering or Chemistry
• At least 2 years relevant experience
• No colour blindness

Remuneration:

• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• Sign-on bonus
• AWS & Variable bonus

• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

· Procurement and sales

· Source & procure equipment/ components/ spares, etc.

· Vendor evaluation and registration

· Prepare purchase requisitions

· Price negotiations

· Prepare sales contracts

· Prepare shipping documents

· Management of supplier and client relationships

· Resolve issues related to requirements, substitutions, damages, quality, delivery and other important terms and conditions.

· Ensure accurate and timely payment for invoices

· After sales service

Job Requirements

· Candidate must possess a Diploma in Engineering or Business Admin with at least 5 year(s) of relevant experience in Marine/ Shipyard.

· Strong communication negotiation and interpersonal skill

· Bilingual in English and Mandarin

· Proficient in Microsoft Office applications (Outlook, Excel, Words and Powerpoint, etc.)

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan