The Civil Engineer is responsible for providing engineering and administrative coordination for the design, supply, construction and testing of the project. The primary challenge of this position is to ensure the project is completed in a timely and cost effective manner to meet contractual arrangements made with the client. Responsibilities will focus on projects with bulk earth works and civil works.

Key responsibilities and accountabilities

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Technical

• Manage interface between UGL Electrical/Structural Engineers and Civil design consultants
• Liaise with subcontractors to ensure job is constructed to the drawings, to the customer requirements
• Attend meetings with client taking a lead role on items like bulk earth works and civil works
• Liaise with Client on all technical aspects of the project
• Ensure that the survey of installations throughout the project is conducted in a professional manner with all results being reviewed and accepted as correct with actions coordinated and documented.
• Verification of all Subcontractor earth works and civil works quantities for progress claims
• Assist the Project Manager with compliance to the documentation required under the UGL Management System
• Review and plan the project with the Project Manager to ensure technical aspects of job are clear and to become familiar with contractual arrangements made with client
• Liaise with Construction Manager to ensure job is on schedule
• Provide a focal point for all technical based queries for associated subcontractors/suppliers.
• Provide engineering advice for subcontractors/suppliers
• Liaise with the Project Manager and the Project Planner regarding schedule issues and status of activities
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed
• Assist the Project Manager with all procurement and purchases of goods and services
• Assessment of risks and hazards involved in tasks, and methods to manage the hazards in order to prevent incidents, injury and damage
• Assist the Project Manager in preparation of monthly reports and also attends the monthly report meetings with Client
• Prepare and circulate the minutes of the monthly meeting with Client
• Responsibilities as per Work Health Safety Training Needs Analysis Matrix
• Propose creation and/or modification of HSSE documents within the management Ensure compliance with all record keeping requirements
• Undertake any adhoc projects, initiatives, tasks as directed by the Construction Manager

Policies and Procedure Responsibilities

• Ensure compliance with all UGL HSSE policies, procedures and relevant legislative requirements.
• Ensure compliance with UGL’s Fitness for Work Policy, including undertaking your own Drug & Alcohol responsibility of care and submitting to random testing as required.
• Ensure compliance with all emergency plans and procedures and ensuring they are displayed as appropriate within your area.
• Ensure compliance with all relevant Safety legislation.
• Ensure all work is compliant with UGL’s Quality Management Systems policies and procedures and ISO 9001:2008 requirements.
• All personnel are responsible for ensuring the quality of their work meets specified standards and requirements.
• Raise any non-conformances, with regard to product or process, with immediate manager or supervisor.
• Ensure compliance with all UGL & Group HR policies & procedures and legislation including Equal Employment Opportunity and Harassment Legislation.
• Ensure compliance with all IT policies & procedures in particular with regards to: appropriate access and use of systems/software, security of data and policies pertaining to viewing/ copying/ downloading of inappropriate, offensive or sexually explicit material.
• Ensure compliance with all Procurement and Asset Management policies and procedures.
• Ensure compliance with all policies and procedures pertaining to commercial obligation, risk management and protection of all intellectual property.

Qualifications and Education Requirements

• Bachelor of Engineering (Civil/ Structural/ Building)
• RPEQ certification desirable
• AS 9001 Quality Systems knowledge
• Minimum 5 Years’ Experience in project related disciplines
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, email

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

We are looking for an experienced IT software engineer to join our dynamic team!

Key responsibilities:

· Report to the IT Manager

· Design, implement, and maintain software applications.

· Monitor IT applications to proactively identify and resolve reported issues.

· Maintain accurate and up-to-date documentation for processes, procedures, and project updates.

· Understands UI, cross-browser compatibility, and general web functions and standards.

· Executes assignments with the use of web applications, scripts, and programming languages such as HTML, CSS, JavaScript, and APIs.

· Develops and validates test routines to ensure the quality of the external and internal interface.

· Plans and delivers software platforms and products across multiple organizational units.

· Designs assignments with web services like REST, SOAP, etc.

· Evaluates written code to ensure it meets industry standards and is compatible with all devices.

· Maintains a professional understanding of web development by tracking trends and participating in study groups.

· Handle ad-hoc tasks and projects as assigned, adapting to changing priorities.

The successful candidate should have:

• BA in Computer Science, Computer Engineering, Information Technology, Information Systems, Software Engineering, or related areas
• Min 3 Years of experience
• Proficiency in C# and/or JS programming languages.
• Proficiency in ASP.NET, .NET Framework, .NETCore, HTML, CSS, JavaScript, NodeJS, NextJS.
• Proficiency in Microsoft SQL Server and/or PostgreSQL.

Working location:

511 Kampong Bahru Road, #04-07, Keppel Distripark, Singapore 099447.

Working hours:

Mondays to Fridays

8:30am to 6:15pm

Whatsapp your resume to 87612258 to APPLY or ENQUIRE TODAY!

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Construction Engineer Responsibilities:

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

Construction Engineer Requirements:

• Bachelor's degree in civil engineering, civil engineering technology, or similar.
• State-approved license.
• At least 2 years experience as a construction engineer in the relevant field of specialization.
• Advance proficiency in construction management software, such as BuildSmart and Smartsheet.
• In-depth knowledge of construction industry regulations.
• Exceptional leadership, project management, decision-making, and problem-solving skills.
• Great mathematical, organizational, and time-management skills.
• Excellent written and verbal communication skills.
• Ability to collaborate with a variety of stakeholders.
• Availability to visit the construction site outside of business hours, when relevant.

Reporting to Senior Manager, Technical & Planning, this position will provide technical support for manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures, and driving plant optimization initiatives.

Responsibilities

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures and recommend appropriate solutions or corrective actions
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions as well as to review and revise Safety Case reports
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings, participating in contract discussion and negotiation with suppliers and following up on action plans and other operational tasks
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors and review and improve existing training materials
• Coordinate Management of Change and support plant investment and infrastructure projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as reviewing and developing standard operating procedures and maintaining proper certification and documentation

Requirements

• Bachelor’s Degree in Chemical Engineering or related discipline with working experience in chemical/polymer plant preferred
• Entry level candidates without experience can be considered
• Meticulous, self-driven, independent and resourceful
• Possess good analytical thinking and problem solving skills
• Effective team player with good communication and presentation skills
• Proficient in Microsoft Office applications
• Able to perform overtime work when required
• Willing to work on Jurong Island

• Carry out project management role for the installation of telecommuication 4G/5G equipment, access points to meet project deadline.
• Business Development scope for TSI/Telecoms Package projects .
• Support Telecoms Lead Engineer in all other Telecoms activities
• Wor on Telecoms systems studies such as PAGA coverage study, radio coverage study, VSAT link calculation, fibre optic link budget, etc
• Liaise with client to resolve Engineering comments and provide solution
• Coordinate with other disciplines and contractors on systems interfaces
• Interpret schematic diagrams and possess a strong understanding of basic electronics and RF telecommunications.

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various In-situ machines for precision work
• Responsible for overseeing and coordinating all activities related to the in-situ crankshaft repairs and maintenance
• Lead and supervise a team of technicians and machinists in performing in-situ crankshaft repairs and maintenance.
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description:

- Proposed CAAS Extension of ATCC

Requirements:

- At least 5 years of supervisory experience in supervision of Civil/Structural works, RC & steel works.

- Experience in supervision of medium to large scale building works, piling works, temporary works, Ground Building Works (GBW) for Government Institutional projects.

- To provide full supervision works to ensure works are carried out in accordance to approved plans under Building Control Act.

- Assist QP to keep and maintain site records.

- Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

- Registered with BCA/IES/ACES as site Resident Engineer

- Job site is at Sealand Road, Changi Area, must be willing to travel and work at that area

- Able to lead a team of site staffs.

Interested applicants to apply to:

[email protected]

Quote: SG510

Submit resume with photo including current and expected salary and contact no. latest by 31 December 2024.

With business expansion, we're looking to hire a Singapore based Service Technical Officer to provide services to our local customers.

For this role, you will need to

■ Commission, calibrate and maintain the performance of the sensors;

■ Provide effective solutions to customers' concerns.

■ Communicate with clients’ engineers and other technicians to ensure that

services are delivered effectively.

■ Promptly following up on service requests and providing customer feedback.

■ Prepare presentations and conduct training to the customers to keep up to date with

the latest developments of the sensors;

■ Write reports and present findings to the Manager after each service visit.

Job requirement

■ Diploma in any field (engineering related major is preferred)

■ At least 2 years of technical service experience within engineering space,

candidates with engineering background are welcome to apply.

■ Team player and independent, good communication skills.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Principal Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 12 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for fresh graduate software engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

Fresh graduates welcome to apply for entry level positions.

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.