Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Support district sales personnel in the handling of Company program service calls on existing products and services and assist in the correction problems as appropriate.
• Participate in design reviews, new application start-ups, and evaluations.
• Assist in critiquing products for serviceability, performance and reliability.
• Inter-act with appropriate company resources and work as a team.
• Ability to assess on-site field problems and operate required testing equipment to return systems to customer conformance.
• Coordinate and manage replacement parts programs with the individual manufacturing plants to ensure the availability of components as needed.
• Assist in the preparation of reports detailing technical problems and solutions to initiate necessary corrective product modifications and/or recommended process changes.
• Document value provided to the customer whenever possible.
• Assist in the development of troubleshooting service guides and bulletins on existing products.
• Assume lead role of maintaining troubleshooting guides/bulletins and distribution to departments when required.
• Qualify, coordinate and monitor outside subcontractor network as required to ensure repair timelines are maintained, and customer satisfaction is maintained.
• Work with other district personnel toward continuous improvement of policies and procedures resulting in increased customer satisfaction.
• Provide installation resource services on a project request basis necessary to satisfy the needs of the customer. Services may include (but not limited to) field surveys, installation checklists, roll-out support services, etc.
• Provide training to the first-line Account Managers on Company offerings and the resources available to them to assist in answering customer questions.
• Seek to keep abreast of the latest industry advances through continuous education

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and
• installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Able to write and maintain clear, concise reports utilizing a standard laptop computer.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player.
• Required to travel to Jurong Island. Company car is provided.

Job Highlights

• The job will offer you excellent opportunity for promotion.
• Good working environment.
• The Company has a broad market and good prospects for development

Job Description

1. Assist Sales Manager for the sales and marketing for local and overseas market and are required traveling overseas on regular basis to carry out duties.

2. Required to co-operate closely with all other department of the company in order for the contact and/ or project can be executed effectively and efficiently.

3. Assist Sales Manager decision making and overview the company daily operation to ensure the operation run smoothly.

4. Assist Sales Manager to preparing itinerary schedule before traveling to overseas, and contact to the person for arrangement for meeting.

5. Assist Sales Manager to monitor and ensure branch offices run smoothly for everything and keep report to the head quarter in routine basis.

6. Assist Sales Manager to prepare power point, company brochure, project reference etc. for presentation and generate commercial agreement and/ or technical agreement for meeting with clients.

7. Assist in decision making for procurement in searching, purchasing and negotiation of purchase and delivery terms of equipment and materials for production.

8. Able to read GA (general arrangement) to prepare material cost list and generate quotation, Technical specification, tender document etc. and reply to the enquiry of customer require.

9. Visit to the local shipyard frequently for gather more information on new project as well as the exiting project, and at the same time build up a good relationship between shipyard and the company.

10. Assist other Marketing related jobs not mentioned.

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)

Position Summary

• Able to do engineering and design for Fire and Gas detection and suppression systems in accordance with international standards (e.g. NFPA) and project specifications.
• Provides daily technical support to instrument and electrical technicians and supervisors during installation.

Tasks and Responsibilities

• Involved in Fire Alarm Detection System Design and installation.
• Involved in Gas Detection Design and installation.
• Involved in Fire Suppression design and installation.
• Involved in preparing Intrinsically Safe calculation for Instruments.
• Involved in HVAC design control philosophy and instrumentation
• Involved in preparing mapping list for interface to customer.
• Involved in preparing bill of materials and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting.

Job Requirements

• Good communication skills in English both written & spoken.
• Must know basic fire alarm detection system.
• Must know gas detection system.
• Must know HVAC instrumentation.
• Must know PLC logic.
• Have knowledge in basic electrical design.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Willing to travel to Batam

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

• To work closely with sales, service, and industry managers in a team approach to serving customers. To perform out-door sales activities to achieve the agreed sales targets.
• To promote and develop existing customers in Singapore for Endress+Hauser products, services and solutions in the industries assigned to your team.
• To provide customer service, build and maintain good customer relations, solve problems, attend to complaints, and provide effective customer support, to achieve the best customer experience from end-to-end.
• To develop sound customer relationships at all levels and keep the accounts plan and forecast regularly updated in Salesforce Lightning CRM.
• To work closely with colleagues internationally, joining our global network to ensure the best of service to our customers and to be an active participant in Kaizen and Lean projects.
• To respond to and follow up on customer enquiries and specifications for products and systems or packages based on E+H products, services and third-party suppliers and pass on clear instruction to Internal Sales Engineer to prepare quotations and proposals in SAP, in a timely manner.
• To be responsible for sales functions, like customer visits, product demonstration, negotiations, complaint handling, providing technical assistance and advice, following up of quotations, closing orders and customer liaison.
• To assist in marketing activities, like exhibitions, seminars, presentations, direct mailing, etc.
• To assist service department in satisfying customers’ after-sales and commissioning service requirements, where applicable.
• To execute agreed strategic plans in an organized way.
• To promote digital sales and meet/exceed assigned targets.
• To be always polite and customer oriented

Requirements

• Diploma in Electrical engineering or its equivalent
• At least 3 years' relevant experience.
• Experience in Sales/Business Development, Project Management or Engineering related industry
• Proven sales records of achieving sales target.
• Knowledge of SAP and Salesforce will be an advantage

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

JOB RESPONSIBILITIES:

• Perform Stamping die set design according to product specification & requirement
• Carry process layout discussion & confirmation with R&D & production team
• Perform 3D CAD construction for complex shapes Profile Punch & Die
• Work as a team & perform tool testing with tester to achieve tooling FA timely
• Carry out further tool improvement during initial production period to stabilize tool condition

JOB REQUIREMENTS:

• Diploma / ITE in Mechanical Engineering, Precision Engineering or related disciplines
• Experience in metal Stamping Designing is needed
• Proficient in 2D & 3D AutoCAD or others CAD applications
• Be able to work independently & work under pressure
• Willing to perform overtime

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $4.5k
• Working location at Joo Koon

Job Responsibilities:

• Ensure projects meet internal and client expectations for quality, budget, delivery timelines, and strategy, complying with Workplace Safety and Health (WSH) standards to avoid Liquidated Damages (LD).
• Monitor project cash flow, ensuring timely submission of progressive payment claims and managing budgets, cash flow projections, and cost variance reporting.
• Review and approve WSH documents (e.g., Risk Assessments, Method Statements, Safe Work Procedures, Fall Prevention Plans, Lifting Plans, Safety Management Systems, Permits to Work).
• Ensure all work is executed safely in compliance with approved safety standards.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Job Description & Requirements

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Key Responsibilities:

- Provide technical support and expertise on marine electrical systems, products, and solutions.

- Assist in the selection, specification, and procurement of marine electrical equipment for various maritime applications.

- Evaluate client requirements and recommend suitable electrical solutions, ensuring compliance with industry standards and regulations.

- Work closely with the sales team to deliver product presentations, provide quotes, and respond to customer inquiries.

- Liaise with vendors and suppliers to ensure the timely procurement of electrical components and equipment.

- Prepare and review electrical drawings, schematics, and documentation for projects.

- Ensure adherence to safety standards and quality assurance procedures for all electrical installations and services.

Job Requirements:

- Minimum 3 years of relevant experience in marine electrical systems.

- Strong understanding of marine electrical standards, regulations, and safety procedures (e.g., SOLAS, ABS, IEC standards).

- Familiarity with electrical design and installation on marine vessels.

- Excellent communication skills, both verbal and written, with the ability to interact with clients, suppliers, and internal teams.

- Ability to work independently and as part of a team in a fast-paced, customer-oriented environment.

- Strong problem-solving skills and attention to detail.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region