Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1.1. Lead and manage the implementation, delivery and operations of digital services, including ICT governance, budget management, application architecture and stakeholder engagement to achieve digital services transformation for the agency.

1.2. Provide experienced technical leadership and direction for digital services

1.3. Define application architecture framework for various components in the end-to-end digital solution and build architecture roadmap.

1.4. Review existing design and implement solutions for improvement from performance, security and usability perspective

1.5. Involved in procurement and vendor management.

1.6. Develop risk identification, quantification and mitigation plan.

1.7. Understand and ensure compliance with policies, standards, and guidelines in Infocomm Technology and Smart Systems Management defined by Singapore Government.

1.8. Prepare technical documentation and design, and conduct sharing sessions

1.9. Improve relevant work systems, processes and SOPs to achieve consistent results.

1.10. Good knowledge of next generation IT, such as cloud technology, IoT, data analytics, system architecture, etc

1.11. Work with Project Manager and clients to handle resources, scope, and schedule

1.12. Design Technology and Application architecture.

1.13. Convert system requirements into software architecture and design documentation.

1.14. Interface and coordinate tasks with Module Leaders to ensure all modules within the system are progressing as planned, and modules can be integrated smoothly.

1.15. Understand and determine clients’ requirements, expectations and design the technical infrastructure.

Job Requirement

1.1. Relevant background in Computer Science/Computer Technology or equivalent.

1.2. Minimum 8 years of working experience in digital service implementation, IT outsourcing management and ICT security.

1.3. Hands-on experience across the spectrum of Web and mobile technologies, such as Microsoft .NET technologies (e.g. C#, ASP.NET MVC 5), HTML5, JQuery, JavaScript, CSS, Microsoft SQL Server/Oracle database management

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description & Requirements

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in AutoCAD / BIM software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

We are looking for proactive marine service engineer who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components Overhaul and maintenance, general mechanical dismantling and assembly works.

Job Description:

· Inspect, diagnose and troubleshoot and carryout repair, maintenance or reconditioning of marine engines 2 & 4

Stroke Main/Aux Engines, Crankshaft & Camshaft Replacement and other onboard machinery.

· Collaborating with internal teams to address customer needs and provide technical assistance.

· Performing on-site repairs, maintenance and reconditioning jobs onboard the vessels in shipyards, ports,

anchorage or voyage and offshore with the team of service technicians.

· Carry out removal and installation work onboard vessels and general servicing and repair in the workshop.

· Interact with customers during the work execution.

Requirements:

· Diploma/Degree in Mechanical, Marine or Engineering related field.

· At least 5 years relevant experience within the engine overhaul industry.

· Be able to work on board vessel's engine room environment, Shipyards, Anchorage etc and travel overseas for

assignments.

· Excellent technical knowledge and problem-solving skills.

· Possess positive and responsible attitude towards work.

· Able to work with other specialists of the same or lower skill level and successfully complete projects.

· Ability to work independently.

· Ability to create internal and external work reports.

· Able to do overtime and work during weekends and public holidays for urgent repair jobs.

· Salary will commensurate according to experience & qualifications.

Additional Information:

· 5 days’ work week

· Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.

· Variable bonus and better medical benefits.

· Career growth & learning opportunity.

Job Description:

• Conduct global structural analyses, including Ultimate Limit State (ULS), Accidental Limit State (ALS), and global fatigue analyses (FLS) for fixed and floating offshore platforms.
• Develop structural design specifications and provide precise fabrication and construction guidelines.
• Prepare detailed structural analysis reports for foundations, support structures, lifting operations, sea fastening, load-out, and dry/wet tow operations, ensuring adherence to classification society standards.
• Perform collision analyses to evaluate structural impacts and propose mitigation strategies.
• Coordinate with classification societies for design and analysis approvals.
• Ensure structural designs comply with offshore wind industry standards and health, safety, and environmental regulations.
• Collaborate with multidisciplinary teams to integrate structural designs with other engineering disciplines.
• Provide technical leadership and mentorship to junior engineers to ensure quality and timely project deliverables.

Requirements:

• Bachelor’s degree in Marine Engineering or Civil Engineering (minimum).
• At least 10 years of experience in Marine & Offshore projects, including conceptual studies, FEED, and detailed design.
• Proficiency in finite element methods and engineering software such as SESAM, SACS, etc.
• Experience or knowledge in wind farm foundations, offshore substations/structures, and floating wind design/analysis is highly desirable.
• Strong leadership abilities, with a commitment to personal and team development.
• Excellent team player with strong communication skills for interactions with clients and third parties.
• Familiarity with marine and offshore industry standards and codes.
• Exceptional verbal and written communication skills, with attention to detail and effective interpersonal abilities.

Job Description:

• Perform preventive maintenance of production equipment.
• To report in writing for maintenance carry out.
• Provide support for network, security, server, UPS and mission critical systems.
• Perform other job responsibilities as and when assigned.

Requirements:

• Minimally 1-2 years of experience in supporting network, security, server, UPS and mission critical systems with a stringent SLA of 99.9%.
• Customer orientated with high level of service attitude.
• Good listening and analytical skills.
• Hardworking, outgoing and enthusiastic.
• Positive working attitude.
• Team player and also able to work independently with little supervision.
• Able to thrive in a dynamic environment.
• Able to understand the system and architecture diagrams.
• Able to understand the user operation environment.
• Willingness to pick up new technologies.
• Flexible to work in rotational shifts.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

*Position Overview:*

We are seeking a skilled and experienced Marine NavCom Service Engineer to join our team. The ideal candidate will have at least 4 years of hands-on experience in the installation, troubleshooting, and servicing of a wide range of marine navigation and communication systems, including but not limited to MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, and maritime IT equipment. Additionally, knowledge in IT/networking and VSAT systems is essential for this role. A General Operator's Certificate (GOC) is recommended. The candidate should also possess a general understanding of marine electrical and electronics systems. Flexibility and a willingness to travel are required for this position.

*Key Responsibilities:*

Install, troubleshoot, and service various marine navigation and communication systems including MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Conduct regular maintenance checks and inspections on installed systems to ensure optimal performance and compliance with safety regulations.
Diagnose and resolve technical issues efficiently to minimize downtime and ensure the continuous operation of onboard systems.
Provide technical support and guidance to onboard crew members regarding the operation and maintenance of navigation and communication systems.
Collaborate with internal teams and external stakeholders to coordinate installations, upgrades, and repairs as needed.
Keep abreast of industry developments, regulations, and technological advancements in marine navigation and communication systems.
Document all service activities, including installation procedures, troubleshooting steps, and solutions provided, accurately and comprehensively.
Qualifications and Experience:

Bachelor's degree or equivalent in Electrical/Electronics Engineering, Telecommunications, or a related field.
Minimum of 4 years of hands-on experience in the installation, troubleshooting, and servicing of marine navigation and communication systems.
Proficiency in the installation, configuration, and maintenance of MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Strong knowledge of IT/networking principles and protocols.
General Operator's Certificate (GOC) is recommended.
Familiarity with marine electrical and electronics systems is desirable.
Excellent problem-solving skills and the ability to work efficiently under pressure.
Effective communication and interpersonal skills.
Flexibility and willingness to travel frequently, including assignments at sea or in remote locations.
Commitment to maintaining high standards of safety and compliance with regulatory requirements.
If you meet the above qualifications and are looking to join a dynamic team in the maritime industry, we encourage you to apply for this exciting opportunity.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Responsibilities:

• Prepares key project documentation in executing the complete Telecom and Navigation engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares telecom system concepts, schedule of deliverables and plan activities in line with overall project schedule, delegate the tasks to telecom team member assigned to the project and monitor the progress
• Leads telecom teams to prepare documents, such as design philosophies, block diagrams, room layout and deck arrangement, cable schedules and etc
• Leads telecom teams to perform system design verification, such as PAGA sound coverage, PAGA voltage drop calculation, Link budget, system redundancy cabling etc. Coordinates with other engineering team members (i.e.yard engineering, basic design and etc.), subcontractors and consultants on technical issues and design solutions in meeting project deliverables
• Leads telecom team to prepare procurement engineering documents, such as technical specifications, equipment data sheets, MTO, technical bid evaluation etc
• Participates in project meeting/technical meeting/3D model review/Workshop, attends to basic technical queries and issues related to Telecom and Navigation system design and reviews the deliverables (i.e.VCD, third party study report, workshop report etc)
• Participates and support for Digital Security review regarding the network design and security implementation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Works with Procurement and project team to source for Telecom & Navigation vendors or Telecom System Integrator in complying with the project technical requirement specifications in meeting project deliverables
• Prepares engineering deliverable such as interconnection diagram, termination diagram, room & equipment layout in compliance with requirements of contract, classifications and regulations and coordinate with various disciplines for material handling, working environment requirement, constructability and installations, operations and maintenance, and safety etc
• Provides solutions to commercial, production and project team members on all aspects of Telecom engineering to support new-built’s/conversion fabrication, installation, testing and commissioning activities
• Performs technical studies and site survey in cooperation with production team members and Telecom & Navigation vendors or Telecom System Integrator for conversion project and/or repair & life extension project
• Performs any other duties as assigned by superior(s) from time to time

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering, Telecommunication Engineering or related engineering disciplines
• 3 years of working experience in planning, designing and construction of Telecom and Navigation system in the oil and gas industry
• Experience in telecom and navigation system design in Pre-FEED, FEED, EPCC, Conversion and Repair & Life Extension.
• Familiarity with USCG and BSEE requirements will be an additional advantages
• Excellent proficiency in English (written and spoken)

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Work Scope:

• To repair electrical and electronic component of plastic processing machinery and equipment.
• To modify electrical and electronic circuit of machinery and equipment for upgrading, data logging & process automation etc.
• To install or de-install electrical works for factory building or machinery.
• To conduct periodical maintenance for electrical and electronic related works.
• To update and maintain electrical circuit drawing of all machinery and installation.
• To design and build new machinery that may improve production efficiency of factory.
• To assist in procurement for components and parts.
• To keep tooling in organized manner.
• Other duties as and when assigned by the company.

Job Requirement:

• Diploma or certification in Electrical Engineering or a related field.
• Minimum of 3 years of experience in industrial electrical maintenance.
• Able to read single-line diagram.
• Hands on experience in electrical installation and cabling
• Able to work independently with discipline.
• Have teamwork and is committed.
• Able to cooperate on overtime arrangement.
• On-job-training will be provided.

Working Conditions:

• Full-time position with potential for overtime.
• May require working in various environmental conditions, including high noise levels and confined spaces.
• Must be able to lift and carry heavy equipment as needed.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Professional are responsible for identifying, analyzing, and relating business
demands. Your responsibilities include aligning priorities, planning and actions
to the overall business objectives. And involve business stakeholders. You will
share and communicate knowledge and innovation. You have knowledge of
the fundamentals of the Semco business model and the value chain.
The function is directly responsible to assist the Project Manager in all aspects
of the assigned project.

• Assist Project Engineers in producing telecom system drawings for
approval submission
• Check system compliance for project requirements and translate to project
documents.
• Checking of equipment ordered for a specific project, ensuring technical
compliance with relevant specification requirements
• Provide project progress updates and status reports to Project Manager
• Provide technical support to system assembly and fabrication, and ensure
assembly is done according to project requirements
• Assist Project Engineers to organize and plan usage of available
resources to achieve optimal performance and cost efficiency for each project
• Assist Project Engineer to report, follow-up and resolve on
non-conformance issues and customers’ complaints
• To maintain Semco’s quality policy and take active part in implementing
quality system
• Critical adherence to deadlines
• Assist the Project Engineer to monitor project deliverables in terms of
delivery and quality control
• Assist in site commissioning if required

We are looking for individuals with the following qualifications and experience:

• Education: Bachelor's Degree in Telecommunications, Electrical & Electronics Engineering, Computer Engineering, or IT.
• Experience: Entry-level candidates welcome

Personal Qualities:

• Excellent analytical and problem-solving skills.
• Strong attention to detail and organizational skills.
• Team player with a positive and proactive attitude.
• Excellent communication and interpersonal skills (written and spoken English).
• Ability to work independently and as part of a team.