Description

· Technical & Helpdesk Support, IT/Computer - Hardware, IT/Computer Network/System/Database Admin, IT/Computer - Hardware

· Installation and configuration of office broadband, firewalls, servers, routers, and workstations, as well as office relocation

· Server and Storage Consolidation, Data Protection and Retention

· Virtualization and Cloud Computing Solutions. Inventory control of laptops and licenses and maintain serial numbers.

· To initiate approval and asset write-offs for IT equipment.

· Monitoring, assigning, and purchase requisition laptops and licenses.

· Evaluate the various PCs and laptops' performance and support levels, and make any required recommendations for future purchases.

· Assist with technical and help desk issues.

· Setup a Virtual Private Network (VPN).

· End-user support (Remote Access, Teamviewer support)

· Conduct an internal compliance audit on a regular basis to prevent illegal software and program downloads.

· Coordination of IT Compliance and Audits

· Review and improve company IT Policy

· Drive Security Awareness

· Keep laptops in good working order for troubleshooting, security, and other purposes.

· Responsible for cybersecurity of our system

Requirement:

· Bachelor Degree in Computer Science and /or with IT-related discipline in relevant professional certifications.

· Minimum of three years' experience working in an IT security-related capacity, with a thorough awareness of cybersecurity frameworks and standards.

· Automation Champion. Network Supervision.

· Citizens of Singapore are encouraged to apply

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

About the role

To run R&D, product development activities and projects related to aerogel such as paints and fire resistant coatings, boards, blankets and other innovation solutions for commercial thermal insulation applications for various industries such as Oil and Gas, Built and Environment, Marine and Offshore and Electric Vehicles. As a core member, it has a pivotal role in shaping the technology, developing the core products together and defining the vision of the company.

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $7000 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Establish R&D procedures and work processes.
• Manage laboratory day-to-day operations including lab organization, laboratory facilities, and safety protocols.
• Stay up to date with scientific literature/patent, brainstorm new ideas with founders and contribute to the intellectual property of the company.
• Development of new and/or improved product formulation to meet customers requirements.
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with process engineers to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Source and evaluate new raw materials for formulation improvement to roll out new variants.
• Monitors the progress of stability study for R&D samples.
• Develop technical specifications, datasheets for commercial and R&D products.
• Trouble-shooting in the areas of formulation and process for routine production.
• Provides documentation to support registration of products with regulatory authority.
• To ensure the quality of product is in accordance with the specification.
• To ensure that products are produced, stored according to the appropriate documentation and monitor storage conditions for materials and products in order to obtain or maintain the required quality.
• To implement quality control framework for commercial products such as COA and COC.
• To ensure that company is always updated with the regulatory requirements.
• To establish and maintain Good Manufacturing Practices for all R&D and commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related record are kept properly

Requirements

• A minimum of bachelors degree in chemical engineering, chemistry, materials science/engineering, manufacturing engineering, or a related field.
• A minimum of 5 years' experience with track record in formulating / developing new coating products with commercial release.
• Experience working with various types of solvent free, water based and solvent-based coatings /paint chemistry is advantageous.
• Leadership abilities, problem solving skills and a good communicator
• Experience in paint additive chemistry
• Project Management expertise
• Experience in industrial coating performance standards such as ISO, ASTM., etc.
• Ability to drive innovation and creativity in a team setting
• Experience in nanotechnology or surface coatings is a plus
• Ambitious, confident, curious and decisive amidst ambiguity and uncertainty

To Apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Lead Materials Engineer (R&D)’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Summary

· Senior/Principal Civil and Structural (C&S) Engineer is an exciting role that offers candidates opportunities in SJ Global Energy’s business unit covering C&S design work for various projects such as CCGT power plants, renewable, clean energy projects and typical land infrastructure for terminaling projects.

Responsibilities:

· Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for civil & structural (C&S) works in industrial/energy related projects. The C&S design will cover foundation, substructure for storage tanks, pipe racks/sleepers/bridge, equipment plinths/foundation, underground pipeline culvert, drainage, sewerage, road infrastructures, superstructures for low-rise buildings/structures, etc.

· Experience in power plant projects would be an added advantage

· Prepare C&S material take-off (MTO) for cost estimates

· Prepare C&S tender specifications, and project requirements, carry out the tender evaluation, etc. for C&S works

· Conduct presentation for concept, FEED and detailed designs to clients and stakeholders

· Project management

· Carry out authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals

Requirements:

· Preferably, honour degree in C&S Engineering from a recognised university and with at least 5 years of detailed design experience in civil & structural engineering projects.

· Conversant in geotechnical engineering design

· Experience in marine facilities’ design would be an added advantage.

· At least 5 years of relevant working experience in the design of concrete and steel structures, drainage, sewerage and road works infrastructures

· Candidate with more than 15 years of relevant experience will be considered for a higher position

· Conversant in Eurocodes, BS Codes, NFPA, API

· Conversant with local authorities’ requirements and submission

· Able to perform a feasibility study, conceptual, FEED and detailed design using commercial software, excel spreadsheet, etc.

· Able to project manage assigned projects independently and possess strong presentation, communication and report writing skills

· Good spoken and written English

· Fluency in spoken and written Chinese would be an advantage

· Able to travel for overseas projects at short notice

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Coordinate equipment and process validation execution, data collection and summaries.
• Perform documentation and release technical requirements/ drawings, write, review or update work instructions for engineering and consumables production lines.
• Assist in MES ticket and process verification/ validation activities.
• Assist Process Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to new product development, yield, quality and throughput.
• Recommend and assist in implementation of improvements in a production environment to meet goals across multiple operations and technologies.
• Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.
• Support with Engineering/ R&D teams to develop processes for new products and improve processes of existing products.
• Supports nonconforming material analysis and investigations.

Qualifications:

• Possess good understanding of manufacturing process and regulated biotech or medical devices manufacturing environment.
• Capable of executing test plans for components, materials, systems and processes.
• Competent in Microsoft word, excel, powerpoint
• Knowledge in product & process feasibility study, line validation, qualification and optimization to production
• Excellent team player, interpersonal and communication skill.
• Well-developed documentation and technical report writing skills
• Able to work well under stress, both internally and across functions and perform multitasking.
• Proactive, innovative and self-motivating.
• Team player with strong focus on safety, quality and timeline.
• Diploma/ Bachelor in Engineering, Sciences or related field
• Experience in manufacturing/ FDA-regulated environment is a plus.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities:

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge.
• To constantly monitor improve the department performance. To conduct periodic review of existing work flows and procedures, and make recommendations for improvements and executing the improvement plans.
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution.
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff.
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly.
• To implement and supervise correct EHS practices within the department.rnal departments on incoming waste discrepancy and revise related SOPs accordingly.ent.
• To implement and supervise correct EHS practices within the department.
• To work with resale for arrangement of recovered products to minimize the storage.
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely.
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations.
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency situation. To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time.
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely.

Secondary responsibilities

• To undertake any other tasks assigned by the Management from time to time.
• As an ISO committee member, to develop and implement documents for operation procedures, such as SOP, RA and MOC, SWP and participate in auditing the various departments as an Internal Auditor

Requirements:

• Degree in Engineering or Chemistry
• At least 2 years relevant experience
• No colour blindness

Remuneration:

• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• Sign-on bonus
• AWS & Variable bonus

Job Summary:

Seeking a Sales Manager / Engineer with a civil engineering background and sales experience in construction or building materials. This role involves liaising with consultants, professional engineers, architects, and façade contractors to drive sales and deliver presentations.

Job Responsibilities:

• Develop and execute sales strategies.
• Build relationships with industry professionals.
• Coordinate with the technical team to present aluminum and glass, façade and curtain wall solutions.
• Coordinate with project teams and provide regular sales updates.
• Follow up on claims and payments from clients to ensure timely processing.

Job Requirements:

• Degree in Civil Engineering
• Sales experience in construction / building materials
• Knowledge of façades, curtain walls, and glazing systems is an advantage
• Strong communication and presentation skills

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

Under the Air Traffic Management Research Institute (ATMRI) (http://atmri.ntu.edu.sg/), Nanyang Technological University, you will be part of a research team to study the use of Artificial Intelligence and Data Analytics in Air Traffic Management Systems. The selected candidate will work on developing innovative machine learning models to address key challenges in the future airspace system, including traffic prediction, optimization, and safety enhancements.

Key Responsibilities:

• Develop and implement machine learning models for air traffic prediction, flow management, and conflict detection.
• Apply deep learning, reinforcement learning, and other advanced AI techniques to improve decision-making in ATM systems.
• Work with real-time and historical air traffic data (e.g., ADS-B) to build predictive models for air traffic demand and capacity.
• Collaborate with a team of researchers and engineers to integrate machine learning models into ATM decision support systems.
• Analyze the performance of machine learning models and optimize their scalability for real-world airspace management applications.
• Participate in project meetings, prepare research reports, and contribute to publications in top-tier academic conferences and journals.
• Assist in the preparation of project proposals and technical documentation.

Job Requirements:

• Master's degree in Artificial Intelligence.
• Evidence of developing Machine Learning and Optimization models for ATM system.
• Strong programming skills in Python.
• Good English writing and communication skills - for research purposes
• Independent and team player.

We regret that only shortlisted candidates will be notified.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

A Corp Lab in NTU is looking for a motivated Research Engineer to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities:

• Develop and implement the data and model interface for the AI/Data Twin platform with IoT or BMS systems.
• Debug and deploy the AI/Data Twin platform in on-site or cloud environments.
• Collaborate with the team to develop automation tools to optimize integration and deployment processes.
• Regularly maintain deployed platforms and perform data analysis.
• Prepare system delivery documents and maintenance reports.
• Quickly identify issues and develop solutions.

Job Requirements:

• Bachelor’s or Master’s degree in Computer Science, Automation, or a related field.
• 2-3 years of experience in DevOps and IT systems maintenance (Linux).
• Proficient in operating systems, Docker, and Kubernetes.
• Skilled in Shell programming and fundamental Python programming.
• Familiar with cloud platforms such as AWS and Azure.
• Understanding of DevOps and automated testing tools, such as Ansible and Selenium.
• Excellent communication and problem-solving skills.
• Priority given to those with a background in power systems or cooling systems.
• Ability to quickly learn new technologies.

We regret that only shortlisted candidates will be notified.