Job Description & Requirements

· Inspecting electrical components during and after the product installation

· The Engineer will ensure clarity and alignment for all team members

• Testing IED NUMERICAL Relays for problems and proposing solutions.
• Familiar in Goose configuration
• IEC61850 Configuration in siemens, ABB, Alstom and Schneider relays.
• Modbus RTU, TCP Communication verification.
• Overall commissioning knowledge in Power system and SAS
• Test equipment such as SFRA, Omicron CPC, CTA, CMC and Transformer testing kits.
• Knowledge in Insulation Oil DGA, BDV.

· Conducts tests and experiments requiring modifications in test setups or procedures subjective judgments in measurement

· Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic and microwave measurement areas

· Establishes test and performance criteria and prescribes calibration approaches, tests, equipment and servicing requirements necessary to ensure measurement traceability

. Must be known of Testing and commissioning Electrical equipment, Switchgear equipment and power transformer. Proficient in testing and commissioning electrical substation, Steel plant and power plant. Set up trouble shooting control and protection circuits like Transformer, Circuit Breaker, CT, PT and switchgear wiring. Sometimes need to work overnight for shutdown maintenance job.

1. Must have Min-7 years experience in testing of CT, PT, relay and transformers

2. Must have knowledge in power system Schematics and SLD`s

3. Must have experience in Testing of GIS panels/ Breakers

4. Coordination with OEM for testing and troubleshooting the equipments.

5. knowledge in Basic configuration and testing of Relays.

6. Experience in handling testing equipment like primary and secondary test sets.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Job Responsibilities

• Responds to Attractions recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment in USS (Universal Studios Singapore).
• Troubleshoots failed components using basic test equipment, schematics/prints and specialized tools, equipment and resources.
• Report to Team Lead during reset of Ride & Show system to ensure safe operation.
• Support Attractions Operation team on the safe evacuation of guests from Ride vehicles during downtime.
• Operate company forklift or specialised vehicle such as high-reach boom lifts when required for recovery of Rides and Shows (Training will be provided by company.)
• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.
• Logs completion of inspections, corrective action and/or repairs made and listing of applicable parts used.
• Generate the required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical/Electrical/Mechatronic Engineering or related field of studies.
• 3-5 Years experience in troubleshooting and repair of basic to moderately complex systems which include - electrical/PLC controls, electro-mechanical devices, hydraulic, pneumatic, and mechanical equipment will be an advantage.
• Ability to troubleshoot electromechanical problems and use good judgment in high pressure situations.
• Able to work at height.
• Able to perform 12 hours shift work, permanent day and weekends/public holidays.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a E&I Engineer to join us on a contract role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Ensure that calibration and preventive maintenance (PM) programs are established for new instruments/equipment in the Manufacturing Unit, Laboratories, Utilities, and General Areas within COMOS, CMX, and SAP-PM by coordinating necessary information.

· Verify that vendor-executed instrument commissioning and calibration for Electrical and Instrumentation (E&I) meet site requirements.

· Update instrument data in COMOS, SAP-PM, and CMX as needed.

· Ensure successful execution of instrument calibrations and the issuance of calibration certificates in CMX, according to the project schedule.

· Provide timely and relevant input to the project team from pre-commissioning through to the end of validation.

· Participate in Electrical and Instrumentation-related troubleshooting, deviations, and root cause investigations.

· Ensure that all Electrical and Instrumentation activities comply with site-specific Work Instructions (WI) and Standard Operating Procedures (SOPs).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description

• Prepare project management plan and its sub-plans, such as: work scope statement,
schedule plan, manpower plan, tools and equipment plan, procurement plan
• Provide engineering support in project or plant maintenance
• Coordinate internal and external audit review
• Engineering calculations associated with current carrying capacity of cables, wires,
fuses and other circuit protective devices.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Executive Engineer (Civil & Structural) to join the Singapore Office in a growing engineering consulting business.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• To work with the Qualified Person (QP) to develop structural scheme for structures and buildings.
• To carry out engineering analysis to assess the stability and load to be sustained by the structures.
• To carry out engineering design in according with Eurocodes or relevant international design codes.
• To prepare submission to authorities for approval of design.
• Provide technical advice to team members/colleagues in supporting or leading role and embrace a culture that values teamwork
• To attend project meetings with Client, Project Manager and Consultants from other disciplines.
• To attend site progress meetings and reply to technical queries.
• To lead junior engineer in delivering design and seek clearance for all relevant parties and authorities
• To conduct supervision & contract administration when required

Key Requirements

• Degree in Civil/Structural Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5 years of experience with design of multi-storey/high-rise building from a local engineering consulting environment will be an advantage.
• Those registered as Professional Engineer with PEB and/or have more relevant working experience will be considered for senior role.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of relevant engineering software.
• Excellent written & spoken communication skills in English.
• Able to interact and work with colleagues and member of other consultants at various levels.
• A team, client and delivery focused working style.

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

RESPONSIBILITIES:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

REQUIREMENTS:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

RESPONSIBILITIES:

• Post-sales activities of Cybersecurity or Network Performance Monitoring products
• Involve in Large-scale (Local & Regional) Project Implementation
• Provide on-site implementation services including testing, deployment & documentation
• Provide technical support in ensuring customer satisfaction
• Analyse and clarify customer queries though troubleshooting and researching existing
  knowledgebase articles/known issues
• Be on routine standby to support 24x7 maintenance support calls
• Requires the ability to communicate issues clearly and concisely

REQUIREMENTS:

• Bachelor's degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• At least 1-2 years relevant experience in IT industry providing network support and
  administration.
• Equip with knowledge & experience in networking such as routing and switching technology.
• Possess CCNA or CCSA certification.
• Able to work independently as well as in a team environment.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients.
• Analytical and possess good troubleshooting skills.
• Willing to work extended hours and on standby duty.
• Excellent interpersonal and communication skills.
• Independent and motivated.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 3 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 5 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external CM suppliers to resolves wafer blocks/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or CM suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects. Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• The Key Performance Indicator is CM product performance in addition to the CM product pricing.

Continuous Improvement

• Initiate and lead projects relating to cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.
• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Solar cell and module processes.
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis.
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data-mining.
• Ability to work under stress in a fast paced environment with self motivation.
• Strong organization and project management skills.
• Ability to communicate effectively with all levels (PS to Management) within the organization.
• Ability to write and speak in English and one other language, preferably Mandarin for liasion with Taiwanese and China suppliers/customers.
• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills communication and organization.
• Good Team player.

Additional Advantageous Skills

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Service Sales Representative, who is responsible for pursuing opportunities for quick turn projects to keep our customers operating effectively, supporting various Outside Sales activities and customer relationship management. Responsible for supporting the company's interests and establishing business relationships to enhance outside sales performance.

Key Responsibilities:

As a Sales Engineer, you’ll be responsible for:

• Establishes prospects and develops a professional relationship to understand the customer needs and suggest products and/or services that meet the customer needs.
• Responsible for leveraging existing Service Agreement Customers / Non-Service Agreement Customer base for service repair / Upgrade opportunities.
• Aids in and supports business development activities for prospects within defined customer segment to support the business strategy.
• Provide leads for service agreement sellers / Service Modernization team when dealing with customers not under contract
• Utilize SFDC to manage customer interactions, activities, and opportunity pipeline.
• Prospects bid opportunities, participates in the preparation of bid responses and the negotiation with potential customers.
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Establish and build credibility with knowledge of Carrier products/solutions.
• Develop and sustain customer relationships Clearly articulate the value of Carrier’s value offerings and how they map to the customers’ needs.
• Ability to detect the Customer’s buying stage and adjust selling accordingly.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Achieve order booking in a timely manner meeting consistently sales metrics and annual targets.

Requirements

We are looking for people who has a passion for sales and possesses great communication skills. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree holder.
• Preferably 2-3 years experiences in Sales or Engineering, candidates without prior relevant experience are welcome to apply.
• Proficient in Microsoft Office Skills.
• Able to communicate with stakeholders of all levels.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

Responsibilities:

• Repairs, preventive maintenance and trouble shooting of precast automatic production machines and overhead cranes
• Able to interpret electrical circuit and mechanical drawings including pneumatic and hydraulics system
• Sound knowledge in PLC, inverter drives and direct-on-line controls
• Able to oversee maintenance team

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 1 year experience in maintenance of mechanical equipment
• 2-3 years experience in production machinery and industrial equipment
• Possess good written & spoken communication in English
• Able to work independently
• Working location : Tuas South