• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevan experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Who we are

We are a boutique management consulting firm offering Business Consulting, Advisory, and Technology services to our banking clients in the wealth space. We partner with our clients on large transformation projects and act as their delivery partners.

We are building a competency center with a high-potential team with niche skill sets. Our focus is to bring together, a diverse talent pool that will create perfect synergy in delivering the best possible solutions for the projects we undertake. We also aspire to provide an inclusive workplace where fresh talent can grow and achieve their full potential.

Job Description

The candidate must have 5+ years of experience in a Data Engineer role with a degree in Computer Science, Informatics, Information systems or similar fields.

Key responsibilities include:

· Designing and building scalable data pipelines to extract, transform, and load data from a variety of sources.

· Maintaining and optimizing existing data pipelines and automating data workflows such as data ingestion, aggregation, and ETL processing.

· Working with data analysts in Fintech space to understand data needs and design appropriate data models.

· Collaborating with cross-functional teams to integrate data pipelines with other systems.

· Ensure data accuracy, integrity, privacy, security, and compliance through quality control procedures.

· Monitor data systems performance and implement optimization strategies.

Minimum Qualifications:

· Strong development experience in at least two or more of the following languages: Python, Java, Scala, Go.

· Experience with working on large data sets and distributed computing in Enterprise using technologies like Hadoop, Spark, Hive, Kafka, etc.

· Proficient with building data pipelines and workflow management tools. Should have worked on Airflow, Nifi or related tools.

· Working knowledge of message queuing, stream processing systems like Kafka, Spark Streaming.

· Hands on experience working with NoSQL databases (like Cassandra, MongoDB, or Neo4j) and relational databases (like MySQL, PostgreSQL, or Oracle)

· Experience with data visualization tools like Tableau, Superset, or similar tools.

· Working knowledge of data quality, data governance, and data security principles.

Good to have:

· Experience with data science and machine learning tools and libraries (e.g. scikit-learn, TensorFlow, PyTorch, etc.)

· Cloud computing experience (e.g. AWS, GCP, Azure)

· Cloudera Certified Professional Data Engineer, IBM Certified Data Engineer, or similar certifications.

· Must be aware of data privacy and security concerns and regulations (e.g. GDPR, CCPA, etc.)

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

Civil Engineer, Ducts & Manhole (indoor office-based)

Salary up to $5200

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.

• To coordinate underground ducts and manholes implementation works with external parties.

• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter

• C&S engineering SME

Responsibilities:

• New Development and Diversion of Services:

- Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.

- Project Manage the implementation of underground ducts and Manholes within new development and service diversion.

- Review method statement and coordination drawings and other relevant construction documents.

• Review 3rd party submission on matters related to Netlink Underground Services

• Support Facilities and Maintenance team on Civil & Structural related issues.

• Participate in tender, contract administration

Requirements:

• Civil Engineering Degree with 3-year engineering/construction experience

• Diploma holders in Civil Engineering with extensive relevant experience will be considered

• Experience in infrastructure (Road works) projcts and its geotechnical aspects.

• Exposure in Service coordination with Authorities and Service providers

• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.

• Ablity to review Method statement. Ability to generate method statements is preferred.

To apply:

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

We are looking for candidates that are looking for IT job.

Job scope as follow for the candidate:

• Provide technical support to ensure the smooth operation of PCs / NB/ Servers/Network switch/Router/Firewall/ printer through regular maintenance & housekeeping.
• Job also include diagnosing and resolving of hardware and software problems, installing software and new applications as well as providing advice and assistance to users.
• Willing to learn & responsible

Job Description

• Using Microsoft technology stacks, i.e Azure services, SharePoint, Power Platform to develop custom applications to fulfil business needs.
• Involve in software delivery lifecycle (i.e., requirements elicitation, estimation/sizing, solution design, development, testing, deployment, post-production support).
• Apply / Setup DevOps best practices and techniques as part of software delivery.
• Improve / Ensure sound security architecture and design of the applications and their environments.
• Plan and carry out data migration and data analysis activities.
• Facilitation / Participation in Agile delivery events (i.e., Planning & Replenishment meetings, Daily Scrum, Team Retrospectives).
• Conduct evangelisation, provide technical consultancy and clinics.
• Able to carry out Azure subscription administration or Power Platform administration will be a plus.

Requirements

• Degree in Information Technology or related fields.
• Minimum 6 years of experience in designing and developing solutions in the domain of Azure services, SharePoint Online, Power Platform preferably as a full-stack developer.
• Strong expertise in Azure App Services, Azure Functions and Azure SQL.
• Strong expertise in DevOps tools for source control management, Pipelines for continuous integration/continuous deployment (CI/CD), Tests Management, Azure Monitor for monitoring and logging, and Azure Resource Manager for infrastructure deployment and management.
• Strong expertise in SharePoint (SPFx), HTML, CSS, JavaScript and React.
• Strong expertise in REST API and Microsoft Graph API.
• Experienced with scripting languages like PowerShell and Bash.
• Experienced in security tools like Azure Security Center, Azure Key Vault and Azure Sentinel.
• Experienced in implementing authentication protocols in applications via Azure Active Directory (AD), OAuth, Single Sign-On (SSO), and Multi-Factor Authentication (MFA).
• Good understanding of SQL Server, T-SQL, and NoSQL, along with expertise in writing and optimizing SQL queries.
• Good understanding of network concepts such as virtual network, DNS, TCP/IP etc. Familiarity with network security protocols like SSL, TLS, SSH, and HTTPS is also required.
• Competencies in Power Platform application development (Canvas App, Model Driven App, Power Pages and Power Automate flows)
• Experienced in relevant platform administration will be an added advantage.
• Has advanced certifications in the relevant domains will be an added advantage.
• Strong critical thinking, numerical, analytical and project management skills.
• Team player with good inter-personal skills.
• Experienced in Agile frameworks like Scrum and Kanban, including facilitation of agile delivery events.

Job Description

The End User Computing (EUC) team in SIA provides IT services for all SIA Group employees in Singapore and Overseas. We are looking for an experienced professional with relevant experience to be part of the EUC team and play a significant role in modernizing our enterprise authentication system. This position also offers significant opportunity to contribute to the enhancement of our security posture by enabling Multi factor Authentication (MFA) and Single Sign-On (SSO) solutions.

Responsibilities

•Design, implement, and maintain a robust enterprise authentication system with a focus on Multi-Factor Authentication (MFA) and Single Sign-On (SSO).

•Evaluate and assess various solutions available in the market and conduct Proof of Concepts (PoC) to determine the best fit for the organization.

•Stay abreast of industry best practices and emerging technologies to continuously enhance and improve authentication mechanisms.

•Collaborate with cross-functional teams to ensure alignment with overall security strategy.

•Develop and execute a comprehensive migration plan to transition users to the new MFA solution.

•Implement effective change management strategies to minimize disruption and ensure a smooth transition.

•Collaborate with application owners and development teams to seamlessly integrate applications with the new SSO solution.

•Define standard and create authentication patterns for application integration.

•Troubleshoot and resolve any issues related to SSO integration, ensuring optimal performance.

•Act as a subject matter expert and provide guidance to internal stakeholders.

Required Skills

•Bachelor’s degree in computer science, Information Technology, or a related field.

•Proven experience in designing and implementing enterprise authentication solutions.

•Solid understanding of Single Sign-On (SSO) and experience with SSO solution implementation.

•Familiarity with identity and access management (IAM) concepts and technologies.

•Strong knowledge of security best practices.

•Excellent communication and interpersonal skills to collaborate effectively with teams.

•Good working knowledge in Active Directory, Single Sign-On, 2 Factor Authentication, Encryption, LDAP/LDAPS, RADIUS protocol, SAML 2.0, Open ID Connect and OAuth 2.0.

•A good understanding of SDLC and Agile methodology.

•Enterprise Architecture (TOGAF) or Microsoft Certification (MCSE) preferred.

•Exposure to ITIL (Incident, Problem & Change management) preferred.

•Ability to work independently, multi-task, and take ownership.

Production technician job duties

Production technicians fulfill several job duties during their workday, including:

• Ensuring materials are available for production manufacturing
• Inspecting and testing finished products
• Identifying problems with production or manufactured goods
• Communicating solutions for production challenges with quality assurance
• Educating coworkers on health and safety regulations
• Establishing preventative maintenance methods
• Analyzing machinery and tools to report faults or broken items
• Scheduling training sessions for coworkers and staff

Production technician work environment

The exact work environment of a production technician can vary depending on their work location and specific job duties. However, many production technicians work in manufacturing companies or factories assembling goods on the factory floor. In these general environments, they might be expected to move quickly and be on their feet for long durations, lifting heavy materials when necessary. While working in this setting, it can be important for production technicians to

Responsibilities:

• Provide excellent customer success services to enterprise clients, establish mutually trusting collaborative relationships, and assist enterprise clients in deriving business value and success from the Huawei Cloud Service Platform solution architecture.
• Possess a profound understanding of data governance products and application scenarios, accurately discern the genuine perspectives of different roles such as customers and partners, and effectively guide solutions.
• Deep understanding and master data governance products, aiding customers in building solutions based on their specific requirements..
• Support the expansion and replication of platform product projects, contributing to the commercial success of these products.

Requirement：

• Bachelor Degree /or above, in Software Engineering, Telecom or equivalent.
• Possess over 5 years of IT-related work experience in relevant industries, with a strong inclination towards innovation, rapid learning adaptability, and a willingness to engage in forward-looking work.
• Preferred experience in data analysis, data modeling, data mining, and business insight projects.
• Familiarity with any of the following business domains: cloud computing, big data, artificial intelligence, machine learning, and the Internet of Things (IoT).
• Specific industry know-how or familiarity with related industry background knowledge is advantageous.
• Experience in planning, designing, and implementing projects in the fields of cloud services and artificial intelligence.
• Experience in solution design, including customer research, business model analysis, solution document writing, and effective communication and collaboration skills.
• Fluent in Chinese and English (to liaise with mandarin speaking associates in HQ).

Working hours: Mon-Fri 8.30am - 6.15pm

Responsibilities

• Develop and maintain the project schedule in order to manage efficiently the time and commitments of the projects
• To develop, monitor and review equipment and manpower deployment plans for construction works
• Responsible for developing and updating the various stages of pre-construction and construction programs to Project Management team
• To perform monthly/weekly/daily project progress reporting activities
• To provide information and assist in the analysis of claims utilizing schedule information and capabilities of the scheduling system to provide accurate image of construction activities and events
• To define the specific activities taking into consideration the Master Project Schedule, as well as labour, material and equipment availabilities throughout the length of the project
• Review actual weekly progress which include the Actual progress S-Curve & Manpower Histogram compared to the approved Baseline
• Plan and forecast work schedule of weekly, monthly work and set productivity to be achieved
• Maintain Baseline Schedule, and update current schedule periodically and analyse the effect of any proposed changes and any additional activities in the project, using Primavera P6 or Microsoft Project software
• To monitor the progress of projects with the mindset to continuously improve, reassess and improve planned schedules in accordance with site conditions and contractual obligations. Update and propose changes to the management especially in the event of any schedule variances
• Take periodic walk around at the project site to check actual work progress and also take progress image for file and presentation to the management
• Any other duties deemed necessary

Requirements

• Candidate must Possess at least a Bachelor Degree/or Diploma in Electrical Engineering
• Candidate must have Certification on Project Management in Primavera P6 Software
• Candidate must have at least 3-5 years Project Planning and Programme experience in Electrical Construction Industry
• Candidate with LTA / MRT project experience will be an advantage

To Apply, please kindly email your updated resume to cv_ray(a)goodjobcreations.com.sg

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

EA Personnel Name: Ray Loh Run Ting

EA Personnel Reg. no.: R1550214

EA License no.: 07C5771

Job Requirements

· Good to have EUC Support, IT helpdesk /IT support experience desirable.

· General skills - Candidate to demonstrate a positive attitude, good customer service skills, resourceful, responsive, and pro-active. Pleasant personality

· Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification, and escalation.

· Support on desktops, notebooks, printers, scanners hardware components.

· Provide support for queries, escalation, problem determination, resolution, and MAC – move, add and change.

· Printer Maintenance.

· Take on and resolve complex calls or tasks the other engineers could not resolve.

Job Responsibilities :

• Plan and monitor project progress to ensure timely delivery
• Liaise with contractors, consultant, design team, client etc
• Manage project resources availability to meet project needs e.g manpower, build components, equipment
• Monitor and control project cost
• Conduct risk assessment for projects
• Arrange O&M work as required

Job Requirements :

• Good knowledge of solar power system design
• Good communication and interpersonal skills which is essential for project work
• Self- motivated, hardworking, enthusiastic
• Willing to put in overtime when necessary to meet project datelines
• Experience in solar PV installation
• Diploma/Degree in Solar/ Renewable/Electrical engineering or related field
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc

1) To conduct factory acceptance test

2) To conduct site acceptance test

3) To produce functional description specification

4) To produce Q&M manuals after SAT

5) To develop PLC/HMI program on Contrologix and Wonderware IAS/HMI.

6) To conduct training to the customer

7) To provide post project support