The Technical Manager is responsible for all technical operational activities, managing the technical department as well as providing engineering & planning services for tender and support services to projects.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress
• Coordinate and support the construction and other departments within the project to fulfil design requirement
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications
• Adherence to safety practices in the work place

Value Add of Position

• Excellent client facing with strong people orientation ability to build and develop positive relations
• Possess strong skill in developing and delivering effective communication to different audiences
• Able to lead and inspire high performance, to ensure project plans are implemented on a timely, efficient and effective basis

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognised university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 8 years of engineering experience in delivering large scale projects

Job Description & Requirements

The Technical Manager is designated as the Design Manager of the LTA MRT project, in charge of design management of the project and managing the consultant and client’s expectation to deliver the project within budget.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget.
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress.
• Coordinate and support the construction and other departments within the project to fulfil design requirement.
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details.
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications.
• Adherence to safety practices in the workplace

Skills & Requirements

• Education: Degree in Civil Engineering from a recognized university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 12 years of engineering experience in delivering projects with at least 8 years of experience in design of civil and infrastructure project
• Extensive experience within a construction environment demonstrating accountability and ability to meet commitments through key internal stakeholders, clients, and staff at all levels.
• Technical Competencies: Technical expertise and knowledge in Structural, Architectural Design
• Proven track record of managing teams and delivering projects from start to hand-over

Job Descriptions

• Manage a team of in-house Technician including roster planning, to carry out day-to-day building M&E services and manage contractors doing maintennace of Soft Services ( Cleaning , Pest control, landscape, security etc)
• Develop and implement preventive/ corrective M&E maintenance to ensure smooth and efficient operations of services.
• To provide technical knowledge and advice to the Team to resolve any site issue. To respond and compile fault cases and highlight any major issue to managers.
• Oversee sub - contractors in fitting out/ reinstatement of A&A works in accordance with authorities/ building’s regulations if needed. Manage minor A&A works M&E /facility-related repair and replacement works.
• Managing and fostering relationships with team/vendors and other key stakeholders through effective communications, collaboration, and engagement.
• Ensure set SLAs (Service Level Agreements) / KPIs (Key Performance Indicators) fulfilled.
• Administration of service or term contracts including cost comparisons and negotiation for contract renewal/ replacement of building M&E services.

Requirements

• Facilities management background with at least 3 years of similar experience.
• Minimum Diploma / Degree in Facilities Management , Building , Engineering or any equivalent.
• Good technical knowledge in Mechanical systems / engineering and ACMV.
• Good communication skills and Proficient in Microsoft application.

5.5 Work Day week

JOB SUMMARY

• The Technical Delivery Lead will be responsible for managing the end-to-end delivery of our AI platform, working closely with cross-functional teams to ensure timely and successful project completion. This role requires a deep understanding of project management, AI and machine learning infrastructure, and technical leadership. The ideal candidate will have extensive experience in delivering complex technical projects, with a strong focus on infrastructure as code, DevOps, and platform automation.

Key Responsibilities

• Project Management: Lead the planning, execution, and delivery of the AI platform, ensuring projects are completed on time, within scope, and within budget.
• Technical Leadership: Provide technical leadership and guidance to engineering teams, ensuring best practices in software development, code quality, testing, and documentation.
• Stakeholder Management: Collaborate with stakeholders, including data scientists, AI engineers, and business leaders, to define project requirements and deliverables.
• Resource Management: Allocate and manage resources effectively to ensure project success, including managing external vendors and contractors as needed.
• Risk Management: Identify potential risks and develop mitigation strategies to ensure the smooth delivery of the platform.
• Infrastructure as Code: Oversee the implementation of infrastructure as code (IaC) using tools like Terraform to automate the provisioning and management of AI infrastructure.
• DevOps & CI/CD: Implement and manage DevOps practices, including continuous integration and continuous deployment (CI/CD) pipelines, to streamline development and deployment processes.
• Platform Automation: Ensure the development and maintenance of automation frameworks to enhance platform efficiency and reliability.
• Quality Assurance: Ensure rigorous testing and quality assurance processes are in place to deliver a robust and reliable AI platform.
• Communication: Maintain clear and effective communication with all project stakeholders, providing regular updates on project status, risks, and issues.
• Continuous Improvement: Foster a culture of continuous improvement, encouraging teams to innovate and adopt new technologies and methodologies.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.

Our Ideal Candidate

• 10 years of experience in technical project management and delivery, with a focus on AI and machine learning infrastructure.
• Strong proficiency in infrastructure as code (IaC) tools like Terraform, DevOps practices, and platform automation frameworks.
• Proven track record of successfully delivering complex technical projects, with strong project management skills and methodologies (e.g., Agile, Scrum).
• Demonstrated leadership and team management experience, with the ability to inspire and guide engineering teams.
• Excellent interpersonal and communication skills, with the ability to effectively collaborate with cross-functional teams and stakeholders.
• Strong analytical and problem-solving skills, with the ability to identify and address technical and project-related challenges.
• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field is preferred.

Role Specific Technical Competencies

• Technical Project Management
• Stakeholder Management, Risk Management
• Oversee Platform Automation, Provide Quality Assurance for AI
• Oversee IaC implementation, Devops CI/CD pipelines for development and deployment

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Responsibilities:

• Technical review on new project orders and order assignments
• Submission of documents; Control Schematic Drawing, Assembly Drawing, Wiring Diagram etc.
• Review all project engineering documents before submitting them to client.
• Manage engineering change function and ensure engineering documents are updated accordingly.
• Provide advice and guidance to technical engineer & drafter team and to support other ops team on technical/engineering matters.
• Recommendations based on common industrial engineering practice, where necessary.
• Implement cost effective and engineering solutions for project to stay competitive.
• Provide engineering practice and engineering calculation where applicable
• Review project specifications i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards related to Valve Automation and/or instrumentation.
• Provide field support to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base & sites if needed.
• Lead the department’s improvement programs and updating SOP
• Annual performance review for staffs to ensure competency
• Support new employee orientation by providing brief training on process flow.
• Support and guide the Operations department in resolving aftermarket technical issues
• Develop and upkeep of staff technical competencies include the design, development of instructor guides, plan training, schedule and conduct training with the staff.

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Min 6 years supervisory experience in Valve Automation and/or instrumentation background
• Knowledge in ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Ability to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP is an added advantage.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Ship building Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles that occurred to the working vessels and establish a proper restore/repair plan.
• Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Master’s degree in mechanical or shipbuilding engineering.
• Minimum 10 years of experience in mechanical or shipbuilding engineering.
• Minimum 2 years of experience as a project manager in new shipbuilding development.
• Minimum 1 power cable laying vessel construction supervision experience.
• Minimum 1 LNG dual-fuel or methanol dual-fuel vessel with basic design experience.
• Minimum 2 years of experience working in a Japanese engineering team.
• Experience in detailed design of hull piping.
• Able to use CAD and to draw a piping diagram on its own.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery. Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels.
• Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel masters shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and Ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 7 years of higher education in mechanical and/or naval engineering.
• Minimum 4 years of experience with designing for installation of special equipment in shipyards.
• Minimum 3 years of experience in considering ship specifications at companies operating work vessels.
• Experience in shipbuilding projects for special vessels that require advanced technical capabilities in Power/Air supply systems, Mechanical alignment, Procurement and overseeing vendors.
• Experience in boarding cable-laying vessels with a cable capacity of 10,000 tons or more.
• Expert knowledge of cable laying equipment installed on cable laying vessels.
• Expert knowledge of cable laying work using cable laying vessels.
• Good knowledge of Working class ROV and Trencher.
• Good knowledge of marine engineering, structural mechanics, ship design and mechanical design.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers during the project period

• Experience in supervision of underpinning work.
• Experience in concrete technology, inspection, quality control, and quality assurance procedures related to the casting of concrete structures.
• Degree in Civil & Structural Engineering.
• Minimum Three (3) years of relevant experience, experience in bridge/viaduct construction preferred.
• Shall be an engineer in the civil/structural discipline with a qualification accredited by JAC of IES/ACES as RTO.
• LTA Project

JOB DESCRIPTION

Job Title

Technical Delivery Manager

Occupation

SENIOR APPLICATION SYSTEM MANAGER

Job Description & Requirements

About the Client:

Our client is MNC company

Responsibilities:

• Manage the end-to-end technical delivery of large IT projects, including scope, cost, quality, and time management; stakeholder communications; risk, issue, and dependency management; and project reporting and governance.
• Develop and maintain project plans, status reports, and other project-related documentation to ensure effective communication among stakeholders and project team members.
• Lead and mentor a team of developers, providing guidance and support throughout the project lifecycle.
• Collaborate with cross-functional teams, including business analysts, project managers, and other stakeholders, to ensure alignment and effective communication.
• Identify and mitigate risks and issues related to technical deliverables, proactively resolving any roadblocks to ensure project success.
• Ensure adherence to coding standards, best practices, and security guidelines across all development activities.
• Provide regular updates on project progress, highlighting key milestones, risks, and issues to relevant stakeholders.
• Contribute to the continuous improvement of development processes and methodologies.
• Conduct code reviews and provide constructive feedback to team members to ensure high-quality deliverables.

Requirement:

• Minimum 5 years of working experience in E2E project implementation.
• Good understanding and experience in Software Development Life Cycle (SDLC).
• Working experience with AML (specifically transaction monitoring).
• Experience in working in vendor environment.
• Ability to work in a fast-paced, team-oriented environment.
• Experience with managing end to end implementation of projects.
• Experience with managing and working with external vendors/teams.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

About the Company

A dynamic and growing subsidiary of a Sweden-based MNC, is a leader in the field of ultra-pure fluid transfer systems. A strong global presence spanning 28 countries and the regional headquarters in Singapore, they are committed to innovation and expansion within the ASEAN region. The company specializes in providing best-in-class transfer systems, including tubes, hoses, fittings, and more, to meet the stringent demands of industries like biomedical, pharmaceutical, and chemicals and continue with their growth and success.

Job Description

The company is seeking a highly motivated and results-oriented Technical Sales Specialist; who will play a crucial role in driving revenue growth and expanding the company's market share in Singapore. This candidate will be responsible for selling and marketing a diverse range of fluid transfer products and single-use assemblies, delivering customized solutions that meet the highest standards in ultra-pure fluid transfers.

Key Responsibilities:

● Develop and execute strategic sales and marketing plans to achieve revenue targets and expand the customer base.

● Identify and pursue new business opportunities while nurturing relationships with existing clients to maximize account penetration.

● Provide exceptional customer service, including prompt and effective handling of inquiries and technical support.

● Conduct product presentations and demonstrations, showcasing value propositions and technical specifications to potential customers.

● Collaborate with internal stakeholders, including the sales and marketing team, engineering, production, and customer support, to ensure seamless order processing, project intake, and customer satisfaction.

● Maintain accurate records of customer interactions, sales activities, and project updates in the company's CRM and ERP systems.

● Stay abreast of market trends, competitor activities, and emerging technologies within the Life Sciences industry.

● Contribute to a positive and supportive team environment where knowledge sharing and collaboration are highly valued.

Qualifications:

● Minimum a Diploma or Bachelor's degree in Biotechnology, Life Sciences, or a related field.

● Proven track record of sales success, preferably within the Life Sciences industry, with 1-2 years of experience or more, particularly in sectors like biomedical, pharmaceutical, chemicals, water treatment, food and beverage, and biofuel.

● Strong technical aptitude with the ability to understand and effectively communicate complex product information.

● Excellent communication, presentation, and interpersonal skills, with the ability to build rapport with clients and internal stakeholders.

● Self-motivated and results-oriented, with a strong work ethic and a passion for sales excellence.

● Proficient in Microsoft Office Suite (Excel, Word, PowerPoint).

Benefits:

● Comprehensive product training to enhance your technical expertise.

● Opportunities to learn and grow with a company expanding its market presence in the ASEAN region.

● Opportunities for professional growth and development within a dynamic and expanding organization, including potential paths in assembly services, commissioning, installation, and support services.

● Competitive compensation and benefits package.

To Apply:

Please submit your resume and a compelling cover letter outlining your relevant experience and qualifications to [email protected]

Job Description

• Recognized Diploma in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Technical Officer Practicing Certificate.
• Minimum 8 years’ experience in construction, preferably in steel and precast building construction.
• Must be familiar with local Regulations/Codes for Civil and Structural related to building projects.
• A good team player and experience in assisting Resident Engineer in supervision.
• Ability to resolve site and technical issues, prepare and document detailed site progress reports.
• Knowledge in Microsoft Word, Excel, and AutoCAD are preferred.

Job Requirements

• Assist the Resident Engineer in supervision and inspection of construction work on site
• Monitor project progress schedule and quality standards, ensure safety on site
• Maintain and update site records on project progress
• Inspect and monitor quality of architectural finishing material delivered to site
• Check all drawings (including authority submission drawings and shop drawings)
• Ensure works are carried out in accordance to statutory requirements

• Reputable MNC company
• LTA Projects
• Alternate 6 Days

Responsibilities:

• Inspection and supervision of Archi work, including but not limited to ALC wall & drywall, off-site precast toilet units, off-site precast façade panels factory, epoxy flooring, vinyl flooring, carpet flooring, plastering, painting, raised floor system, ceiling, screeding, tiling, waterproofing, room handover, defects, auto-door testing, lift interior, & resolving conflicts between Architectural, Structural & M&E works.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

Requirements:

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.
• Able to work alt sat work week.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Role: Lead Technical Consultant

Responsibilities

• Responsible for Design and delivery of DeltaV systems on site.
• Participate in the design, development, and implementation of Automation solutions in line with S88 standards for the plant.
• Lead team of engineers to deliver the Automation Project on site.
• Lead, design Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards.
• As a Subject Matter expert, lead development of systems architecture, specifications, controls strategies, sequence of operations through all design stages
• Build and maintain trusted relationships with client.

Requirements

• Good technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Good experience In Automation Sector ideally in the Pharmaceutical and/or Biotechnology industry.
• Good Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc),
• Familiarity with GAMP lifecycleand quality management processes employed in the pharmaceutical sector.
• Excellent computer skills, proficient in Microsoft Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills.
• Leadership abilities, works well in a team environment.
• Capacity to lead team of engineers for design, development, and delivering Automation projects.
• Experience with Operations Support on site
• Good analytical & problem-solving skills

About Cognizant

Cognizant (NASDAQ-100: CTSH) is one of the world's leading professional services companies, transforming clients' business, operating and technology models for the digital era. Our unique industry-based, consultative approach helps clients envision, build and run more innovative and efficient businesses. Headquartered in the U.S., Cognizant is ranked 195 on the Fortune 500 and is consistently listed among the most admired companies in the world. Learn how Cognizant helps clients lead with digital at www.cognizant.com or follow us @Cognizant.

Job Description

• Industry/ Organization Type: Manufacturing (Consumer Appliances)
• Position Title: Technical Support Assistant
• Working Location: Pasir Ris
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $3,500 + AWS + Overseas Allowances + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Troubleshoot various hotel guestroom appliances such as safes, minibars, kettles, hairdryers, irons, and clocks.
• Manage the entire spare parts inventory and improve inventory control processes.
• Handle technical issues for local and overseas hotel customers and generate investigation reports.
• Collaborate closely with certification and sales colleagues to address challenges.
• Participate in testing, evaluating, and implementing new products.
• Visits to overseas customers/distributors to provide technical support.

APPLY NOW!!!

• A diploma or degree in electrical and/or mechanical engineering is advantageous.
• Familiarity with Microsoft Word, Excel, and PowerPoint.
• A hands-on, eager-to-learn, and progressive attitude.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69028 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause, and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality,environment, health & safety requirements are met.

Requirements:

• Must have a Bachelor of Engineering in Marine Electronics and Mechanical Engineering, Graduated advanced Marine Technology Specialist Course or similar.
• Minimum 3 years of Engineering experience in an offshore wind farm, ROV, Trencher or offshore vessel projects.
• Expert knowledge of Trencher (power cable trenching machine)
• Expert knowledge of Work class ROV
• Expert knowledge of wind farm construction projects.
• Expert knowledge of seabed soil information especially.
• Good knowledge of cable laying equipment installed on cable laying vessels.
• Good knowledge of cable laying work using cable laying vessels.
• Can draw the model with 2D and 3D Auto CAD
• Positive working attitude and ability to work in a fast-paced environment.

Responsibilities:

• Confirm compliance with IMO, classification standards (ClassNK) and inspections (JG) stipulated by the Japanese government and comply with technical standards.
• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality accurately.
• Ship design drawings and technical specifications can be checked.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Able to prepare progress reports and report them to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 15 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Mechanical and or Electrical engineering
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Practical experience at a shipyard.
• Experience in reclamation works using TSHDs.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Good Knowledge of high- and low-voltage electricity.
• Well-versed in ship maintenance requirements.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Excellent writing and high communication skills.

Job Title: Technical Business Analyst (Salesforce)
Location: Singapore

Position Type: Contract

Responsibilities

As a Business Analyst, you will work in collaboration with a government agency, contributing as a key member of the project team, comprising the Product/Project Manager, Solution Architect, and Technical Services Consultant. Your primary responsibility will be to deliver ICT solutions to support Singapore's vision of becoming a Smart Nation.

In this role, you will:

• Elicit business needs and analyze business problems to define and deploy digital solutions for citizens, businesses, and public officers.
• Collaborate with outsourced, co-sourced, or insourced development teams to ensure delivery of well-defined digital solutions.
• Provide advice to stakeholders on best practices in using digital technologies.
• Work closely with stakeholders to facilitate the deployment of digital solutions.

Key Tasks Include:

• Partner with business teams to identify and analyze citizen/business needs using human-centric, visual methods like service journeys, and develop business cases.
• Collaborate with project teams to develop user stories, technical/functional specifications, and acceptance criteria.
• Evaluate and recommend suitable technologies while aligning with strategic directions, such as cloud-based solutions, modernization of legacy systems, and the SG Tech Stack.
• Identify and adopt appropriate development methodologies (e.g., Agile or Waterfall) in various development environments.
• Plan, review, and conduct testing and data conversion to meet specifications.
• Drive product/system readiness for smooth deployment, adoption, and operations.
• Analyze and address technical problems during the Operations & Maintenance phase.
• Assess and manage the impact of requested changes while proposing continuous improvements.

Experience and Skills Needed

• A degree or diploma in Computer Science, Information Systems, IT, or related fields.
• Participation in at least one full software/product development cycle, preferably using Agile methodologies.
• Proven experience in IT business analysis, application solutioning, design, and testing.
• Strong understanding of customer/user experience, design thinking, service journey mapping, and digital product lifecycle management.
• Excellent analytical, conceptualization, and problem-solving skills.
• Exceptional communication skills, both written and verbal, with the ability to influence stakeholders.

Preferred Qualifications

• Knowledge of cloud-based technology, enterprise architecture, and modernizing legacy systems.
• Familiarity with the SG Tech Stack or equivalent technologies.
• Experience in collaborative environments with co-sourced or outsourced teams.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

This is a Technical Business Analyst opportunity for a public sector services company. The role will mainly support the web and mobile version of a widely-used application.

RESPONSIBILITIES:

• Modifying, enhancing or adapting existing or proposed systems within an organisation with the purpose of improving business efficiency and productivity.
• Plans activities involving the examination and documentation of technical requirements for new solutions to be created and user needs analysis.
• Analyses the feasibility of new systems and enhancements to existing systems, translates technical requirements into system specifications and writes test cases.
• Develops documentation and guides for the use of new or enhanced systems.
• Manages analysis projects and is open-minded and innovative in exploring new and alternative solutions to optimise systems.
• Able to engage and support others in the team, and readily put forth his ideas in a clear and compelling manner.

REQUIREMENTS:

• Degree in Computer Science, Computer Engineering or equivalent
• At least 5 years relevant IT Business Analyst work experience
• Experience in assessment of requirements feasibility, functional and technical design, and involved in project life cycle
• Strong analytical skills, self-motivated and ability to work independently
• Ability to communicate effectively and collaborate with teams
• Proficient in MS Office and basic understanding of Windows Servers and MS SQL

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

An established Civil & Structural Engineering Consulting firm in Singapore requires the following:

Resident Technical Officer

Responsibilities:

• To assist QP(Supervision) on the site supervision and coordination works.
• To attend site meetings and resolve site technical issues.
• To review contractor’s submission.

Requirements:

• Registered with IES as Resident Technical Officers (RTO) in Singapore.
• Minimum 3 years of site experience and preferably in viaduct structures / MRT projects / road works or geotechnical works.
• Able to work independently as well as in a team.

Interested applicants, please write-in with detailed resume, stating personal particulars, current & expected salaries, availability and experiences to [email protected]

Job: Business Analyst ( technical Writer)

Duration: 12 Months ( renewable)

Location: Central Singapore

As a Business Analyst/Technical Writer, you will be responsible for creating and maintaining high-quality documentation for both functional and technical aspects of application/ platforms. You will work closely with solution architects, development leads, developers, product managers and other stakeholders to translate complex technical information into clear, concise and structure documentation. Your role will involve ensuring that documentation meets the needs of both technical and non-technical stakeholders, supporting solutioning, integration, ops and app/platform design discussion.

Responsibilities:

Create, organise and maintain functional and technical documentation for platform, including architectural, functional flows, data flows, data/entity, micro services, etc.

• Collaborate with solution architects, development leads, developers, and other stakeholders to drive documentation discussion.

• Translate complex technical concepts into clear, structured documentation that is accessible to both technical and non-technical audiences.

• Ensure consistency, accuracy, and completeness of documentation.

• Create and maintain templates and documentation standards to ensure consistency across projects and teams.

• Conduct regular reviews and updates of documentation based on changes.

• Work with cross-functional teams to ensure that all documentation aligns with the platform documentation.

• Facilitate knowledge transfer between development teams, business units, and end-users through detailed documentation

Requirements:

Bachelor’s degree in Information Technology, Computer Science, Technical Communication, or a related field.

• At least 3 years of experience as a Technical Writer, Business Analyst, or a related role, with a focus on creating both technical and functional documentation.

• Understanding of software development lifecycle (SDLC) and familiarity with Agile methodologies.

• Ability to grasp complex technical concepts and translate them into easily understandable documents for various audiences.

• Experience with documentation tools such as Confluence, Jira, Excel or similar platforms.

• Knowledge of software systems, APIs, databases, and enterprise architectures.

• Strong organizational and communication skills, with a keen attention to detail.

• Proven ability to manage multiple documentation projects simultaneously and meet tight deadlines.

Job Description

• Industry/ Organization Type: Manufacturing (Consumer Appliances)
• Position Title: Technical Support Assistant
• Working Location: Pasir Ris
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $3,500 + AWS + Overseas Allowances + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Troubleshoot various hotel guestroom appliances such as safes, minibars, kettles, hairdryers, irons, and clocks.
• Manage the entire spare parts inventory and improve inventory control processes.
• Handle technical issues for local and overseas hotel customers and generate investigation reports.
• Collaborate closely with certification and sales colleagues to address challenges.
• Participate in testing, evaluating, and implementing new products.
• Visits to overseas customers/distributors to provide technical support.

APPLY NOW!!!

• A diploma or degree in electrical and/or mechanical engineering is advantageous.
• Familiarity with Microsoft Word, Excel, and PowerPoint.
• A hands-on, eager-to-learn, and progressive attitude.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69028 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Managing quotation requests, generating quotes in ERP, and forwarding quotes to clients.
• To assign project numbers, view work files, execute orders, and create job numbers.
• After receiving confirmation of the client's request, coordinate with the internal department to carry it out.
• Email correspondence and communication with the client regarding delivery instructions and readiness
• Delivery orders are issued, and SCM is contacted for pickup and delivery.
• Time management and coordination skills are essential for any task that the business manager or sales manager assigns.
• Creating shipment documentation and communicating with a shipping/forwarding company in order to export goods
• Send purchase requisition forms (PRs) to the supply chain division so that the supplier can receive a purchase order.
• Verify the supplier's invoice for payment, close the necessary job files that were anticipated for the month, and print the quotation and job costing sheet for the sales manager to evaluate.
• Make sure all vendor invoices are filed in job files and submitted for payment processing.
• Maintain a record of every project milestone and send the appropriate invoice to the client.
• Prior to the actual billing invoice being sent to the customer, the drafting specification of the invoice must be prepared with all required printouts, such as the quotation, customer purchase order, email confirmation, onsite timesheet, and general expenses, for the sales manager and business manager to review and approve.

Role:

• Ensure vessels meet required technical standards and performance levels.
• Systematically update and store vessels’ certificates and documents.
• Implement the Company’s planned maintenance system effectively.
• Prepare, arrange, and manage class, statutory, and other vessel surveys.
• Prepare, manage, and monitor dry-dockings and other necessary repairs and maintenance.
• Review and enhance crew performance on vessels.
• Prepare and manage the technical budget for vessels.
• Perform other assigned tasks as needed.

Requirements:

• Tanker seagoing experience as a Chief Engineer or Second Engineer (minimum COC Class 2 or 3), or at least 2 years of experience as a technical superintendent for oil tankers and bunker tankers.
• Strong integrity and professionalism.
• Excellent leadership, teamwork, management, and communication skills.
• Proficient in spoken and written communication.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels andestablish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 4 years of higher education in mechanical and/or naval engineering.
• Minimum 2 years of experience with ship hull design and outfitting design in shipyards.
• Experience in building six or more new ships at a shipyard.
• Experience in large civil construction project sites over SGD120M in General Civil works
• Experience in large marine construction project sites over SGD100M in Marine construction works
• Well-versed in ship maintenance requirements.
• Good knowledge of ship engineering, structural mechanics, marine engineering, and marine equipment
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers
• during the project period.

Responsibilities:

• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Able to prepare progress reports and reports to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 12 years of ship maintenance management experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Proven track record in the ship of maintenance management

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Experience in large size of dredging & reclamation project sites over SGD 500M
• Experience in design, calculation, planning and modification of ships and ships equipment.

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Good knowledge of marine engineering and structural mechanics
• Experience in planning large-size crane equipment.
• Good knowledge of the ClassNK survey
• Well-versed in ship maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting / finding the root cause.