JOB DESCRIPTION

· Work on SoC architecture discussion and optimization with architect; SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Work on SoC floorplan with architect and APR; SoC power check; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

KEY JOB PURPOSE

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of high efficiency large-area perovskite panels in our flagship project, working towards the development of world leading perovskite photovoltaics as well as module integration.

KEY RESPONSIBILITIES

The job scope includes:

• Fabricate perovskite solar cells with 25% power conversion efficiency
• Improve device stability of highly efficient perovskite solar cell through material and device innovation
• Development of fabrication processes, material characterization and reliability testing capabilities for the perovskite photovoltaics on a weekly basis
• Dedicated to the rapid development of highly efficiency perovskite solar cells
• Conceptualize and test of new halide perovskite compositions and device configurations for enhanced stability and efficiency
• Design and test solar cells in various sizes
• Report writing and results presentation
• Regular maintaining of research and study records, conceptualize, execute and interpret scientific experiments
• Identify critical research pathways through assessment of internal results and literature review
• Take responsibility for maintaining lab equipment and follow safety protocols
• Interface with equipment vendors to meet project needs
• Work closely with internal colleagues in Singapore and China to work in company target.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Master or PhD in Materials Science, Chemistry or related fields with in-depth knowledge of materials (especially perovskites), device physics and processing
• Previous experience in fabricating p-i-n or n-i-p typed of perovskite solar cells with high efficiency, experience in device certification is a plus.
• Expertise in materials characterization techniques.
• Good skills in time management, experiment design and data analysis.
• Good communication and interpersonal skills

We regret that only shortlisted candidates will be notified.

• 5.5 Days work
• 830am to 530pm, 830am to 1230pm
• $4500 - $5000
• Main Con

Job Scope:

• Plan, organize and arrange daily construction activities.
• Supervise the direct workers and to give instruction to the sub-contractors.
• Coordinate with land surveyors and sub-contractors on all setting out works.
• Liaise with QP(S) representative for inspection of site works.
• Organize and supervise house-keeping and safety implementation.
• Report daily manpower and machinery to the Project Manager.

Requirements:

• Diploma / Degree holder in Construction / Building or related
• Min 2 years of working experience
• Singaporean Only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to “[email protected]”

EA Reg. No: R1880058 | Dylan

EA LIC. No: 15C7752

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

Responsibilities:

• Provide maintenance and support for Customers' IT Network Services.
• Hands-on experience in troubleshooting large, complex networks comprises of 10 to 20 nodes.
• Experience working with LAN/WAN/WLAN which include:

1. Cisco Wireless, Routers, Catalyst and Nexus Switches, Firepower, IPS/IDS, ISE, ASA, ESA, WSA, SMA
2. Alcatel Wireless and OmniSwitch
3. Arista Switches and Cloudvision
4. Fortinet, Checkpoint, SolarWinds NPM/NCM/NTA, F5 LTM and Aruba ClearPass
   

• Perform break-fix which include troubleshooting and problem identification for any network services.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Perform the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests.
• Work closely with Service Delivery Manager to fulfil deliverables, service report and operational request.
• Establish TAC cases with the principal vendor for complex problem until its resolved.
• Mentor Tier 1 Engineers and conduct training to align the Engineers’ technical competency.

Requirements:

• Required to have minimum 3 – 5 years of hands-on network technical support experience in SI Environment.
• Cisco and Arista certification is preferred.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation, maintenance support and break-fix.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Strong customer service orientation.
• Able to work in 24 x 7 standby duties

Work location: Jurong East

As an Associate Quality Engineer to be ensuring effective quality control, continuous improvement and in line with Zero Defects Philosophy to the end-to-end value chain.

Your main responsibilities:

• Benchmark quality control in production, to develop internal work processes and improvement handling to ensure quality assurance.
• Analyze process weakness and Quality performance data and work with internal departments (including external suppliers) on quality improvement plans.
• Create, review and update inspection SOPs, inspection checklist, control plan or special inspection instructions when needed.
• Coordinate with upstream and downstream process department/teams on quality related issues.
• Provide timely response to customers complaints including root cause analysis, facilitate containment, initiate improvements etc.
• Ensure that the department is readily prepared for internal and external quality audits.
• Initiate quality checks when needed and resolve system integrity wherever possible.
• Handle product recalls/delivery stops/rework processes to be taken place in the factory premises whenever the need arises in a timely and satisfactory manner.
• Administrator for documents relating to group standards and ensure timely implementation and awareness of relevant standards.
• Monitoring of engineering change management to ensure proper process handling from both internal and external suppliers.
• Organizing calibration for measuring tools
• To review the product warranty from the FAS and promote the improvement with the team.
• Ad-hoc duties where required.

Your Background:

• Degree/Diploma in Engineering or related field
• Minimum 2 years of working experience

Do you want to learn more?

This position is based in Singapore. If this interests you, please upload your CV/resume and cover letter today via our Careers portal.

We look forward to hearing from you.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves QA/QC document developing; monitoring site quality control activities; monitoring compliance with standards; implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as per the required by project Quality Assurance Plan.

2. Develop and/or review QC report templates, checklists as per ITPs.

3. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training to subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Take part in project internal quality audits in accordance with project audit procedure to ensure compliance with company ISO 9001 QMS, Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Take part in project external quality audits to subcontractors in accordance with project audit procedure to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Regularly monitor project KPIs, ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, at the meantime, report to QAQC manager.

8. Coordinate with discipline engineers, subcontractors, the client, third party inspectors to ensure project quality requirements are met.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant QE experience in Singapore.

Ø Experience in quality assurance (QA) and QA document developing.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Experience in defects rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule