Contract Period:

From 15 Jan 2025 for 10 months to 20 months depending on the project requirement

Duties and responsibilities:

· To perform all roles and responsibilities required of site supervisors under the Building Control Act.

· To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.

· To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Client, SO, SOR, QP and Resident Engineer.

· Check shop drawings submitted by contractor, as-built drawings and Operation and Maintenance Manual submitted by contractor; and ensure that the required construction tests in connection with the construction works are carried out where necessary.

· Submit site daily reports of works done by contractor including daily manpower and equipment status on site to Client and Consultant Team.

· Inspect and maintain records of equipment/machinery/licensed machinery operator/permits (both statutory and aviation requirements)

· To ensure that the structural elements or critical works of the construction works are being
carried out in accordance with the approved plans and with any terms and conditions imposed by the Commissioner of Building Control where necessary.

· To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.

· To take and carry out instructions from and represent the Client, SO, SOR, QP and Resident Engineer/Architect on site.

Shall possess the following minimum requirements and practical experience stipulated below:

· Diploma in Civil/Structural Engineering or an equivalent certificate from a recognized institution/university or acceptable to the Commissioner of Building Control.

· Registered RTO (with BCA / IES / ACES) with Min. 5 years of RTO experience, institutional Project working experience preferred

· Good understanding in construction drawings and specification for Structural and / or Architectural works

· Familiar with Singapore Building Control Act and Construction Regulations.

· Good knowledge or experience in several aspects of construction activities

· Experienced in Coordinating Architectural / Structural works with project team

Job Description

• Lead, plan and manage projects involving multiple systems.
• Communicating with internal/external stakeholders including offshore development team.
• For any change request is raised, understand the customer’s expectation, discuss with the customer and development team to fix the requirement and specification.
• Provide the support for the customer in any incidents/clarification on the systems.
• Expected to perform Hands-on activity (Investigation, Fixing, Testing, Module release).
• Communicate with the offshore development team to discuss and understand detailed implementation.
• Ensure all technical specifications are recorded & updated timely.

Job Requirements:

• Degree in Information Technology.
• Min 5 years and above in IT banking services.
• Experienced in Avaloq Technologies with core banking expertise.
• Excellent stakeholder management and communication skills.
• Strong analytical and strategic thinking, as well as the ability to grasp and document abstract and complex matters.
• Strong result orientation and stress resistance.
• Teamwork and ability to share knowledge with the team.
• Strong verbal and written communication skills.

Please send your detailed resume in MS Word format including the following details to: [email protected]

1. Working experience

2. Reason for leaving each employment

3. Last drawn salary

4. Expected salary

5. Date of availability

Technical Manager

Salary: $7,000 - $10,,000 + 14-15 Days AL + Bonus

5 Working Days, 9am-6pm

Changi South (Between Tanah Merah / Simei / Expo MRT)

General

• Support Head of Engineering in training and developing the engineers on technical matters, including handling and operating all broadcast equipment.
• Assist with engineering technical tasks to ensure smooth running of daily engineering operations.
• Establish an SOP for Site Survey and prepare Production and

Technical

• Integration Layout Plan. To review and make relevant updates as required for process improvement.
• Implement design and make permanent layout for racks along with serial numbers and standard placing of panels.
• Support Head of Engineering to improve and test system designs.
• Support process of racks and kit standardization.
• Collaborate with Head of Engineering to establish a process for equipment testing and preparation.
• To review and make relevant updates on a yearly basis for process improvement.
• Ensure a process is in place for communication/escalation of technical problems on all projects.
• Research technical development standards for present and new technologies. Provide technical support of the company's service to clients
• Design the project template to cover the tasks needed for each project
• Keep the project task updated for each project on hand.

Before Project

• Review technical specifications of equipment and crew for quotation prepared by Sales Department.
• Participate in client/contractor meetings and site recce when required.
• Address clients’ technical queries prior to the project.
• Expand list of equipment from quotation to a detailed list (to include all equipment needed).
• Prepare Engineering book to include technical information regarding
• Router/Switcher I/O, Distribution assignments, cabin/room layouts etc. 17.Create a timeline for project preparation and set the targets. Adjust based on any changes subjected to availability of engineers at the base, shipping schedules, deliverables or scope of the projects.
• Communicate with Equipment Planner, Warehouse and Engineering Department to monitor the project and ensure it is on the right track.
• Check the equipment packing list and ensure that it matches the expanded list.
• Sign off and approve the Packing List to be used for a project.
• Prepare Production and Technical Integration Layout for each project with relevant technical information and ensure relevant parties receive it before project.

During Project

• Be part of the Support Team during project by monitoring the support email and respond to communications received.

After Project

• Conduct post-project evaluation on technical performance and issues encountered and suggest possible improvements for the next project.

Requirements

• Degree qualified in Electrical / Communication / Broadcast Engineering or similar related field.
• 10+ years of relevant work experience.
• An expert in equipment and products used in broadcasting; for example, audio and vision mixers, radio communication products, cameras, and camera lens
• Experienced in technical training for knowledge transfer

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Roles & Responsibilities

We are looking for a self-motivated rounded IT professional with prior experience in managing multiple IT Development and Support teams in an outsourced environment in BFSI (Banking, Financial Services & Insurance) domain.

Responsibilities

• To manage large development and Production Support teams in an onsite offshore environment involving in excess of 100+ FTEs.
• Ability to demonstrate through experience the understanding and implementation of ITIL process.
• Manage overall team’s service quality and lead in any service recovery issues with clients.
• Provide expertise to identify and translate system requirements into software design artifacts.
• To be a Subject Matter Expertise and act as visionary and strategist for solution/application area.
• Survey market landscape for solution/application insights, direction, vendors, and methods.
• Act as technology leaders within our wider digital and technology practices, providing thought leadership, guidance and coaching to junior members of team.
• Interface and coordinate tasks with internal and external technical resources. Collaborate with Project Managers and technical staff to provision estimates, develop overall implementation solution/application plan, and serve as a lead as required, to implement the installation, customization, and integration efforts.
• Ability to manage the Fixed price engagement.
• Able to demonstrate on how scope, schedule and budget are managed effectively.
• To demonstrate good technical acumen by having strong technical background for effective management of the team.
• Broad BFSI domain knowledge.
• Responsible for establishing operating procedures, people management, planning activities & work assignment within the span of control.

Skills Requirement

• Bachelor’s degree in Information Technology, Computer Science, Engineering or similar areas.
• Prior experience in managing multi-ethnic, multi-geo teams.
• 19+ years of experience in Relevant Field.
• Good Project management experience/knowledge using various project management methodologies like Agile Scrum/Kanban, Waterfall, Iterative etc.
• Broad BFSI domain knowledge with in-depth knowledge in any one of the domain areas like Lending, Cash Management, Transaction Banking, Trade Finance etc.
• Proven hands on expertise in Core Java, JDBC,Json,XML parsing, EIP using Apache Camel And Performance Fine Tuning.
• Strong Experience in managing & designing EAI applications using Axway’s XIB/Synchrony, SAP XI/PI and Mercator.
• Good understanding of IT process, procedures & identifying and implementing the productivity improvement levers.
• Understanding IT outsourcing engagement and commercial models.
• Prior experience of managing transitions including transition from incumbent vendors.
• Good project management knowledge including various project management methodologies – like Agile, Waterfall etc.
• Experience of managing/ participating in RFP/Bid process including Due Diligence.
• Strong IT technical experience in any of the prominent technologies in digital, data / analytics etc.

Non-Technical / Soft Skills

• Willingness to learn new technologies and ability to adopt to work in a corporate environment.
• Outstanding communication skills both oral and written, technical and non-technical and the ability to work with diverse group of individuals in a professional environment.
• Ability to communicate both oral and written with client mid/senior management professionals.
• Ability to present status report in a senior management forum and ability to articulate and answer questions.
• Good Negotiation and interpersonal skills.
• Excellent customer orientation and communication skills.

AWS Sales, Marketing, and Global Services (SMGS) is responsible for driving revenue, adoption, and growth from the largest and fastest growing small- and mid-market accounts to enterprise-level customers including public sector.

As a Sr. Technical Account Manager you will provide consultative architectural and operational guidance delivered to help customers achieve the greatest value from AWS.

As we continue to rapidly expand in Singapore, you’ll have plenty of opportunities to develop your technical, consulting and leadership skills. You’ll work with talented cloud technologists whilst expanding your knowledge of AWS products. You’ll also have the chance to receive mentorship and gain AWS certifications.

Key job responsibilities
• You’ll build solutions, provide technical guidance and advocate for the customer
• Ensure AWS environments remain operationally healthy whilst reducing cost and complexity
• Develop trusting relationships with customers, understanding their business needs and technical challenges
• Using your technical acumen and customer obsession, you’ll drive technical discussions regarding incidents, trade-offs, and risk management
• Consult with a range of partners from developers through to C-suite executives
• Collaborate with AWS Solutions Architects, Business Developers, Professional Services Consultants, and Sales Account Managers
• With a bias for action, you'll proactively find opportunities for customers to gain additional value from AWS
• Provide detailed reviews of service disruptions, metrics, detailed prelaunch planning
• Being part of a wider Enterprise Support team you’ll provide post-sales, consultative expertise
• Solve a variety of problems across different customers as they migrate their workloads to the cloud
• Uplift customer capabilities by running workshops, brown bag sessions, etc.

A day in the life
As a trusted advisor you’ll have a direct impact in helping our customers gain the most value from cloud technology. You’ll craft and execute strategies to drive our customers’ adoption and use of AWS services.

Our Technical Account Managers partner with some of the most iconic businesses in the country. These range from rising startups building their business from scratch through to large enterprises going through significant transformation. You’ll provide advice on architecture, support strategy, project, and launch planning as well as ongoing operational issues. Watch a short video about life as a Technical Account Manager team here https://www.youtube.com/watch?v=EBA_8o0F9D0

About the team
Diverse Experiences
AWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.

Why AWS?
Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.

Inclusive Team Culture
Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.

Mentorship & Career Growth
We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.

Work/Life Balance
We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.

Provide technical guidance, product knowledge, and exceptional customer service to clients, ultimately driving sales and fostering lasting relationships.

Product Expertise:

· Develop an in-depth understanding of the jewelry products offered, including materials, craftsmanship, and design.

· Stay updated on industry trends, new materials, and innovative techniques in jewelry manufacturing.

Customer Engagement:

· Build strong and lasting relationships with clients, understanding their preferences and needs.

· Provide personalized product recommendations and solutions based on technical knowledge and customer requirements.

Technical Consultation:

· Offer technical guidance and explanations to customers regarding jewelry specifications, such as metals, gemstones, and craftsmanship.

· Address customer inquiries and concerns with accuracy and professionalism.

New Customer Acquisition and client retention

· Identify new customers and working closely with other teams to generate leads.

· Nurture existing customer relationships through follow-up and after-sales support.

· Seek opportunities for upselling and cross-selling to existing client

Market Analysis:

· Monitor market trends and competitor activities to identify opportunities and challenges.

· Provide feedback to the product development team to enhance existing products or develop new offerings.

Order Processing:

· Manage the order process, including pricing, invoicing, and delivery coordination.

· Ensure accuracy in order fulfillment and customer satisfaction post-purchase.

Sales Reporting:

· Maintain accurate records of sales activities and customer interactions.

· Generate sales reports and provide insights to the management team.

Staff Training and Development:

· Create and execute training programs for sales associates, emphasizing product knowledge and customer service skills.

· Maintain and update training materials and manuals.

The ideal candidate will help build, maintain, and troubleshoot, the company's rapidly expanding Automated Guided Vehicles, Autonomous Mobile Robot & Material Handling System. They will work alongside with Sales & Development team and our principal factories to ensure highest levels of performance and ability, and manage any problems that arise.

Roles & Responsibility

· To provide application and system support to customers and partners on all robotics and system which the company distributes and represent.

· To assist Sales & Development team in Sales Pitch, Project Planning & Proposal, technical specification and demo/ simulation.

· To support robotics programming, installation and commissioning.

· After sales service and troubleshoot any technical issue arise.

· To liaise with product principals and our R&D team base in HQ Indonesia.

· Other ad-hoc support duties.

Job Requirement

· ITE or Diploma in Mechatronics, Robotics, IT, electronics, AI and any engineering fields.

· 1 ~ 2 years of relevant work experience in system integration, robotics or Automation.

· Knowledge in Autocad is advantaged. To make and amend engineering drawing when require.

· Good working knowledge in IT, Network system and skill in software interfaces will be an added advantage.

· Able to understand robotics, robotics developments, autonomous navigation and system integration.

· Good communication skills, resourceful and can work independently.

What you will do:

We are looking for an L3 Technical Support Specialist to join our team and lead our efforts in the dynamic APAC region. While the focus of this role is the region, responsibilities are not limited to the region, this is a global role. Our team members operate with a high degree of autonomy and are expected to frequently coordinate their activities with their peers.

You will have worldwide responsibility for supporting the installation and service of our hardware solutions. These include but are not limited to RFID, Loss Prevention (AM, RF), Video Integrations, and certain OEM products. This team is the final point of escalation prior to engaging Engineering resources. Their primary interface is to Regional and Country Lead Technical Support resources to support the timely and proper installation and service of Sensormatic Hardware solutions.

How you will do it:

• Primary responsibilities are to directly deliver and coordinate L3 support activities in the APAC region. Secondary responsibilities are to provide L3 Technical Support globally.
• Work closely with Level 1 and Level 2 support teams, engineering, product development, and quality assurance teams to resolve issues.
• Assist in root cause analysis and propose long-term solutions for recurring problems.
• Create and maintain detailed technical documentation, including knowledge base articles, troubleshooting guides, and best practice job aids.
• Develop and share deep product expertise, including training internal support teams as needed.
• Evaluate system performance and operation, create and pursue improvements to enhance functionality and reliability.
• Troubleshoot and diagnose RFID tags, readers, antennas, middleware, and associated software.
• Troubleshoot and diagnose problems related to AM and RF based Loss Prevention systems and devices, including associated integrations and applications.
• Document and analyze test results and work with firmware and hardware engineers to identify root cause of issues.
• Document technical issues using digital tools, including but not limited to using Jira.
• Work within department to assist in testing and system setup as directed. This is a hands-on position; you will be required to install and configure systems to execute required evaluations.
• Serve as the final escalation point for resolving complex hardware and system integration issues. Provide detailed and effective communication with partners, and internal teams during the resolution process.
• Lead routine regional (APAC) and global technical discussions and manage escalations with professionalism and efficiency.
• This position is office (lab) based in our Singapore Regional HQ. (Travel may be required up to 10% of the time)

What we look for:

• Bachelor’s degree in technical field or 7 years’ equivalent technical experience
• Minimum 3 years’ experience with Sensormatic Hardware based RFID and Loss Prevention solutions with supporting RFID deployments a strong plus.
• General understanding of Engineering Standard Practices and scientific test methodologies
• Previous experience working with Engineering Groups to debug and report internal or external issues.
• Experience configuring, connecting and managing devices onto Ethernet and wireless based networks including an understanding of basic networking including IP addressing: Gateways, DNS, DHCP.
• Hands on Electro-mechanical installation skills.
• Must demonstrate excellent written and verbal communication skills in English. Must be able to organize and present ideas in a convincing and compelling manner to a small and large audience.
• Contributes to the creation of a team-based, collaborative environment, promoting candor and receptivity, clarity of purpose, and a commitment to achieve business goals.
• Must demonstrate superior ability to understand, analyze and assess a wide variety of complex business and/or technical issues.
• Good knowledge of bug reporting and source control tools such as Jira.
• Experience with Jira, MQTT, Postman, REST and SOAP protocols a strong plus.
• Moderate Windows and Linux Operating system knowledge.
• Wireshark knowledge for Network packet monitoring.
• General SDLC knowledge for both Agile and Waterfall.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Resident Technical Officer (Archi / C&S / M&E) for A&A project

At Palelai Buddhist Temple @ 49 Bedok Walk

- Duration: 2-year contract - Start work once structural works initiated (includes demolition)

- Commencement date : March 2025

Requirements:

• Approved Registered RTO Certificate.
• Registered as RTO with Institution of Engineers Singapore (IES)/BCA/ACES.
• Minimum Degree/Diploma in Civil or Structural Engineering or equivalent
• Minimum 5 years of relevant working experience in Structural, Architectural and M&E.
• Experience with ERSS
• Able to fully understand architectural, structural and M&E drawings and contract documents in carrying out the works
• Good communication skills

Responsibilities:

• Be fully conversant with the current Building Control Act and Statutory Boards’ bylaws relevant to the works.
• Carry out daily inspection to ensure works are complying and progressing, inform Employer, Consultants, Site team and Contractor of non-compliance
• Carry out regular site checks on Contractor and ensure compliance to environmental, health and work safety as per MOM requirement
• Comply with all requirements concerning supervision of the contractor’s work, quality control of the works, prepare weekly and monthly site progress reports, assist Consultants to coordinate the various disciplines/trades and the latest information available for the works implementation, attend all site meetings and coordination meetings, and keep a proper documentation system.
• Supervise all testing and commissioning of the various installations and ensure its successful completion and safe operation
• Ensure the required standards of quality and accuracy are maintained for all works and are conformed to contract specifications, construction drawings, approved materials and mock-up, instructions and statutory requirements
• Check through all the architectural, structural and M&E drawings/ documents and highlight any discrepancies found between or within the same disciplines prior to the commencement of works
• Be responsible for the supervision of all mechanical, ventilation & air-conditioning, electrical, sanitary and plumbing, lift installation, and fire protection on site.

Role:

• Ensure the safe, economical, and efficient operation and maintenance of marine equipment on ships in line with customer contracts/Charter Party agreements and within approved budgets, meeting the satisfaction of both owners and clients.
• Serve as the primary onshore point of contact for vessels regarding technical management and mobilization activities.
• Maintain regular communication with the owner regarding daily operations as defined and agreed with the Marine Manager.
• Oversee Statutory and Classification surveys for all vessel equipment and systems.
• Conduct preventive and corrective maintenance to avoid technical or operational non-conformities that could lead to downtime.
• Provide proactive feedback to the Fleet Manager and Marine Manager to support continuous improvement of the PMS maintenance system.
• Monitor and follow up on vessel technical performance and key performance indicators (KPIs).
• Take prompt action to address and improve performance in cases of non-conformities or deviations.
• Ensure corrective actions are implemented in response to technical incidents or non-conformities.
• Analyze breakdowns and technical incidents and recommend learnings for the fleet.
• Submit weekly technical status reports for the vessel to the Marine Manager.
• Plan, coordinate, and supervise vessel repairs and dry-docking in collaboration with relevant stakeholders.
• Arrange repairs, provide spare parts and service engineers, and oversee repair work during major breakdowns to ensure safety, quality, and cost efficiency.
• Handle insurance-related matters, including notifications, follow-ups, and settlements, in coordination with the Fleet Manager and Marine Manager.
• Lead vessel condition assessments.
• Participate in appraisals and selection of key vessel personnel.
• Comply with requirements and report any non-conformities.
• Collaborate with other fleet disciplines to optimize vessel and fleet performance.
• Proactively seek and implement effective solutions for both the company and its clients.
• Demonstrate flexibility in handling ad hoc situations.
• Actively contribute to improving operational routines and solutions.
• Perform other duties as assigned.

Requirements:

• Minimum of 3 years of relevant experience.
• Preferred sea time experience as Chief Engineer on offshore vessels.
• Familiarity with operations and technical aspects of OSVs.
• Proven skills in budgeting and cost control.
• Strong knowledge in the following areas

1. General vessel machinery, equipment, and systems.
2. Classification and statutory regulations.
3. Engine types, including Caterpillar, Cummins, Wartsila, and Niigata.
4. FPP, CPP, Z-Pellers, and Azimuth drives.
5. DP systems and maintenance.
6. Diesel-electric drives and hybrid engine configurations.
7. Computerized PMS and related software.

• Preferably experienced in ship management.
• Availability to travel on short notice.
• Strong communication and information-sharing abilities.

Media Specialist TAMs work across all AWS Elemental media products and apply their product knowledge to key customer projects during the specification, development, deployment and acceptance phases to deploy video workflows.

Media Specialist TAMs work hand-in-hand with Media Specialist Solutions Architecture (SA) teams in AWS Sales, with Media Specialist SAs working to understand customer needs and design relevant media solutions, Media Specialist TAMs also work closely with customers to move those solutions from conceptual design to long-term production operations. When customized solutions are needed, the Media Specialist TAM may also work closely with AWS Professional Services by representing the operational needs of the customer and aligning with the capabilities of AWS Support. While a Media Specialist TAM is not expected to develop software, a software development background is valuable in helping understand complex customer needs and drive software solutions.
Media Specialist TAMs take overall ownership of the long-term operational health of their deployed solutions and, by extension, significantly contribute to the overall success of their assigned customers. Media Specialist TAMs will also work closely with AWS Support TAMs, who will have overall TAM responsibility for AWS Enterprise Support customers. Most importantly, Media Specialist TAMs recognize that long-term customer success depends on on-going support and deep domain-focused guidance throughout the lifespan of the customer.

As a Senior Media Specialist TAM, you will:

• Complete the onboarding and off-boarding requirements of assigned key customers
• Own customer health dashboards for media workflows, working closely with the AWS TAMs and Technical Project Manager where assigned
• Work across AWS Elemental products and with AWS Solutions Architects to define detailed customer project requirements and scope feature tickets
• Interface with customer project managers and technical owners to understand requirements and deliver product releases
• Collaborate with Product Managers to prioritize customer requirements, advocating for the customer
• Work with Engineering managers to ensure delivery of product features to meet customer requirements
• Advocate, specify, and own the availability of customer test environments either at AWS Elemental HQs or at customer location
• Verify implemented product features and test multi-product customer project workflows
• Communicate with customers and internally across, up, and down customer organizations
• Mentor junior Media Specialist TAMs and Engineers
• Define and implement team level metrics and processes

Basic qualifications

• A Bachelor’s Degree in Computer Science, Math, or related discipline required, or equivalent work experience
• 2+ years experience using the public cloud as a developer, architect, technical program manager or implementer
• 4+ years technical project management, technical account management, or professional services consulting experience that includes customer-facing responsibilities
• 2+ years experience (and demonstrated credibility) working in a technical role within a software engineering-focused business
• 3+ years experience in the Media & Entertainment market segment

Preferred qualifications

Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit <a href="https://amazon.jobs/content/en/how-we-hire/accommodations">https://amazon.jobs/content/en/how-we-hire/accommodations</a> for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Experience in a 24x7 operational services or support environment
Experience in internal enterprise or external customer-facing environment as a technical lead
Ability to travel domestically up to 20-30%
Excellent communication and leadership skills including facilitation, negotiation, and conflict resolution
Ability to understand and communicate business and technical needs
4+ years software engineering experience
Video processing technologies (MPEG2 / AVC/ HEVC/ MPEGTS)
Adaptive bitrate video streaming and delivery technologies
Experience with Amazon Web Services or other cloud providers

Looking for a senior technical manager who would be able to implement OFSA ACCM product implementations, effective customer interactions and collaboration among various teams -internal and external

Job description displayed in the job posting:

- Must have sound knowledge on Oracle’s Financial Services Analytical Application (OFSAA) and Oracle’s Financial Services Analytical Application Infrastructure (OFSAAI) technical solutions
- Working experience in AML and compliance domain.
- Musthave in-depth knowledge and technically hands-on in OFSAA FCCM solutions
- Good understanding of OFSAA data model
- Should be able to install, deploy and customize OFSAA products – mainly AML, ECM, KYC
- Should have through knowledge on infra management for OFSAA products
- Must be able to perform configuration and provide technical assistance to implement OFSAA FCCM products
- Must be able to work on ETL/data ingestion technologies for loading data into FCCM products
- Possess good knowledge on SQL-PL/SQL and ability to debug issues related to DB performances.
- Must be familiar with application servers, admin console and deployment of

OFSAA FCCM products
- Sound knowledge on OFSAA batch framework
- Strong command over shell scripts, working experience in LINUX
- Must be familiar with Java, JavaScript, JSON, JDBC, XML

Responsibilities displayed in the job posting

- Should have self-management, inter-personal and good communication skill
- Should be a good team player and should be able to work with client’s technical team
- Should be able to write and report technical artefacts clearly
- Must be flexible in work schedule and timing
- Posses multi-task capabilities, skills to adjust to multiple demands, and dynamic change

Qualifications displayed in the job posting:

• 8-10 years of experience relevant to this position including 4 years of consulting experience.
• Prior team leadership or management experience preferred.
• Undergraduate degree or equivalent experience preferred. Product or technical expertise relevant to practice focus.
• Ability to communicate effectively.
• Ability to build rapport with team members and clients.
• Strong influencing and negotiation skills.
• Ability to travel as needed.

Position: Senior Technical Consultant (SuccessFactors)

Our team is looking for a highly experienced Senior Technical Consultant to join our dynamic team. This role demands advanced expertise in SAP SuccessFactors, particularly in integration development, along with prior leadership experience. Proficiency in SAP CPI (Cloud Platform Integration), Integration Center, and SuccessFactors APIs is required, and knowledge of Dell Boomi is highly preferred. The successful candidate will play a key role in providing post-go-live support to clients, offering technical guidance, and ensuring the smooth implementation of integration solutions.

Primary Responsibilities:

• Gain a thorough understanding of client business objectives and requirements to design and configure SAP SuccessFactors solutions tailored to their needs.
• Evaluate existing integration setups, address technical issues, and implement necessary updates or modifications.
• Act as the primary point of contact for clients, ensuring clear communication and alignment of expectations.
• Maintain the quality of system configurations and project deliverables while adhering to best practices and industry standards.
• Provide mentorship and support to junior consultants to foster their professional development.
• Participate in team meetings and contribute to progress updates on client engagements.
• Simplify complex technical concepts and effectively communicate them to clients and team members.
• Assess workloads and plan tasks efficiently for yourself and the team.
• Maintain accurate records of time, expenses, and deliverables for ongoing projects.
• Contribute to additional internal initiatives, such as process improvements and reporting activities.

Qualifications and Experience:

• Bachelor’s Degree in Information Technology, Business, or a related field (preferred but not mandatory).
• 3–5 years of experience working with SAP SuccessFactors, including system integration and configuration.
• Certification in one or more SAP SuccessFactors modules (Associate or Professional level).
• Proven track record in managing SAP SuccessFactors integrations, with expertise in Boomi, SAP CPI, and SAP Cloud Platform Integration (certifications are advantageous).
• Demonstrated ability to manage technical integration projects and provide effective support to clients.
• Experience leading and guiding technical teams, especially in client-facing roles.

Core Competencies:

• Excellent analytical and troubleshooting skills.
• Strong verbal and written communication abilities.
• Effective time management skills and the ability to handle multiple priorities.
• A team-focused attitude with a commitment to delivering exceptional results for clients.
• This position offers the opportunity to collaborate with a skilled team, work on cutting-edge technologies, and contribute to the success of clients in their SAP SuccessFactors implementations.

If you are passionate about technical consulting and delivering impactful results, we encourage you to apply.

Role:

• Ensure vessel certificates are up-to-date and maintain e-documents within the system.
• Assist the Technical Superintendent or Manager in the preparation, monitoring, and control of repair and maintenance budgets for the fleet.
• Support the Technical Superintendent/Manager with the quotation and requisition processes for services and stores.
• Contribute to the creation of technical specifications for dockings and related operations.
• Review and follow up on Planned Maintenance System (PMS) reports from vessels.
• Oversee the tracking and submission of month-end reports from vessels.
• Carry out other ad-hoc tasks as assigned by the Technical Superintendent/Manager.

Requirements:

• Diploma/ITE in Marine Engineering or a relevant field (preference for Maritime or engineering majors).
• Excellent communication and interpersonal abilities.
• Proficient in MS Office software.
• Able to work independently.
• Ability to complete tasks within set deadlines.
• Effective team player.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1. Mechanical experiments and design
   • Experiments - e.g. designing variations to the grout extruder to allow less waste and better reliability
   • Design - e.g. most of the upcoming v4 robot is being designed by interns with Jakub supervising them
2. Mechanical manufacturing, assembly and testing (only for R&D, our manufacturing is outsourced)
   • 3D printing - Slicing prints (often for multi-filament printing), managing and repairing printers (we have Tenlog TL-D3, TL-D5, Ender 3, Prusa i3)
   • Outsourcing manufacturing - specifying cabling, machining etc. to manufacturers
   • Machine tools - making some parts by hand when we need to quickly iterate
   • Assembly - putting in inserts, bolting parts together, waterproofing
   • Testing - testing the robot’s grout extrusion and cleaning, making minor adjustments to make sure everything is running properly and robot produces nice grout lines
3. Electrical experiments and design
   • Design - most of our PCBs have been designed by interns, aiming to minimise free wires in the robot, speed up assembly, allow easy modification where needed. Generally connecting all modules, controlling power, providing a physical user interface…
   • Experiments - e.g. sourcing and testing various motor and driver combinations to pick for our drive system
4. Electrical assembly (only for R&D, our manufacturing is outsourced)
   • Outsourcing production of cable assemblies and PCBs
   • Where necessary to make modifications - soldering PCBs, soldering power cables, crimping cables
5. Embedded programming
   • Writing object oriented C++ code
   • Keeping the code clean and maintainable
6. Robotics DevOps & Real World Industry Trials (expect to be on site 1-2 times a week)
   • Understand the whole project and run our ROS2 stack on real HW.
   • Create reproducible testing methodology and evaluate metrics on the HW.
   • Be in charge of the robots on the construction site.
   • Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

We are seeking a detail-oriented and efficient Resident Technical Officer to join our team in Singapore, Singapore. As a key member of our construction supervision team, you will play a crucial role in ensuring the quality and compliance of various civil engineering projects.

• Provide quality and compliance supervision for construction of mechanical works, including piping, water tanks, etc,
• Assist the Superintending Officer in daily supervision and coordination duties
• Inspect and supervise contractors' works and tests according to approved drawings and specifications
• Maintain accurate quality records of all works and monitor project progress
• Implement and oversee quality assurance plans in a well-coordinated manner
• Coordinate with contractors, stakeholders, authorities, and interfacing contractors on the execution of works
• Assist engineers in supervision, inspection, and quality control of on-site construction work
• Monitor and report on work progress as per the contractor's approved program
• Handle contractors' queries, reports, and verify claims
• Ensure adherence to local building codes and regulations
• Collaborate with project teams to identify and resolve technical issues
• Contribute to the continuous improvement of construction processes and methodologies

Role Overview

We are seeking a Technical Architect with expertise in digital assets, tokenization, and financial market infrastructure. The role involves guiding engineering and stakeholder teams on technical planning and execution, while also serving as a bridge to communicate technical topics clearly and effectively.

Key Responsibilities

1. Technical Implementation & Coordination

o Assist specific technical workstreams within projects focusing on sub-areas of design and delivery.

o Collaborate with cross-functional teams (developers, analysts, external vendors) to ensure best-in-class solutions, aligning with project timelines and organizational goals

2. Integration of Projects

o Coordinate with project managers and technical leads to ensure seamless integration across these initiatives.

o Identify common components, requirements, and dependencies to optimize interoperability and performance.

3. Collaboration & Communication

o Engage with partner central banks, financial institutions, and vendors to gather requirements and align priorities.

o Assist specific technical workstreams within projectsfocusing on sub-areas of design and delivery.

o Work closely with other subject matter experts, product owners, and leads

4. Project Delivery

o Support sprint planning, backlog refinement, and development processes in an agile environment.

o Track risks, identify issues, and propose practical solutions collaboratively with technical teams.

5. Stakeholder Engagement

o Work closely with various workstreams to ensure the projects’ technical solutions align with broader organizational objectives.

o Incorporate feedback from partnering organizations as needed.

Qualifications & Experience

• Education:

Master’s degree in Finance, Computer Science, or a related field (or equivalent combination of education and experience) with demonstrated expertise across both disciplines.

• Financial Markets Knowledge:

Familiarity with digital assets, tokenization, and financial market infrastructure— particularly in the context of central bank money and settlement.

• Technical Skills:

Experience with cloud platforms (Azure), Java, zero-knowledge proof (ZKP) applications, MPC frameworks, Solidity, APIs, and other industry frameworks. Good understanding of the latest technological developments and their impact on central banking and financial market infrastructures.

• Project Delivery:

Proven track record contributing to technical product or platform delivery, preferably within the financial sector. Ability to meet project milestones on time.

• Regulatory Insight:

Exposure to compliance-focused projects (e.g., KYC/AML) and regulatory requirements is advantageous. Experience working with central banks or regulators is highly desirable.

• Problem-Solving & Innovation:

A proactive mindset to identify challenges, propose creative solutions, and drive continuous improvement.

What We Offer

• Innovative Projects: Be at the forefront of projects shaping the future of finance and payments on a global scale.

• Collaborative Environment: Work with a team of experts and stakeholders in a dynamic, international setting.

• Professional Growth: Opportunity to engage with cutting-edge technologies and practices in an agile, research-oriented environment.

• Contract Terms: 1-year fixed contract with the possibility of extension based on performance and organizational requirements.

EA Reg Number: R21103035

EA License Number: 07C3924 | Company Registration No: 200609504D

Job Description

• Supervise construction of Diaphragm Wall
• Supervise Bored Pile construction
• Supervise and ensure strict quality control
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Monitor and report progress of the works on site
• Expect to work a minimum of 60 hours per week

Requirements

• Possess a Degree in Civil Engineering or equivalent
• Very good experience in the construction of Bored Pile, Diaphragm Wall, Basement Excvation works, Structural Works,
• Strong Experience in Report preperation, Site Management, Quality Control
• Minimum 3 years of relevant experience in the above areas

Job Description

Role: Senior Technical Lead

Location: Singapore

Exp: 8+ Years

Requirements

• 8 to 12 years of PEGA development and implementation.
• Mandatory PEGA Certification.
• Good in client management.
• Good communication & coordination skills.
• Good Knowledge in waterfall & Agile lifecycle.

EA Number: 11C4879

• Perform routine and periodic inspections on building services/facilities, submit reports or defect lists to the manager, and carry out necessary rectifications.
• Conduct installations, troubleshooting, and preventive/corrective maintenance on systems such as HVAC, electrical, fire protection, plumbing, and building management systems.
• Address tenant complaints, service calls, and breakdowns, carry out repairs, and submit relevant maintenance reports to the manager.
• Oversee contractors, ensuring maintenance and repair work is done according to specifications, safety protocols, and quality standards.

Requirements:

• Nitec in Mechanical/Electrical Engineering or equivalent
• At least 2 years of experience in performing building inspections, maintenance, and repairs for Commercial Building.
• Strong knowledge in M&E systems (HVAC, electrical, fire protection, plumbing, and building management systems).
• Good troubleshooting and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Responsibilities:

· To assist the Resident Engineer in supervision and inspection of architectural works on site

· To inspect and monitor quality of architectural finishing materials delivered to site, and quality of workmanship

· To carry out supervision and co-ordination of architectural works of the project and shall exercise all reasonable skill, care and diligence in the discharge of the contract

· To ensure timely submission of shop drawings, technical submittals and material samples by the contractors

· To supervise the execution of the construction works and ensure the works are carried out by the contractors in accordance with contract specifications and drawings, complying with quality and standards

Job Requirements:

· Bachelor degree equivalent or higher, in Architecture or Building Services, Engineering or related disciplines from a recognized institution

· Minimum 2 years of site supervision experience

· Past working experiences in healthcare/residential/institutional building projects is preferred

· Proficient in Microsoft Word and Excel for project update and reports

· Good communication and interpersonal skills

· A good team player and experience in assisting Resident Engineer in supervision of works

Conversant with local construction practices, codes & regulations

Job Description:

• Establish sales channels;
• Attend to sales enquiries and prepare sales quotation;
• Providing pre-sales technical assistance and product education;
• Assist in formulating business strategies and identify new business opportunities;
• Preparing and negotiating tender and contract terms and conditions to meet both client and company needs;
• Providing after-sales support services;
• Build & maintain good relationship with clients;
• Supporting marketing activities by attending trade shows, conferences and other marketing events;
• Making technical presentation and demonstrating how a product meets client’s needs.

Requirements:

• Diploma or Degree in IT, Engineering or any related field
• Hardworking, proactive, self-motivated with good working attitude
• Aggressive and strong customer-oriented service mentality
• Possess strong communication and interpersonal skills

Key Responsibilities:

1. Work Coordination:

• Arrange technician work orders and update supervisors.
• Track and follow up on outstanding technical issues.

2. Administrative Tasks:

• Manage Purchase Requisitions, Orders, and vendor follow-ups for invoices and deliveries.
• Maintain organized filing systems for department documents.

3. Communication:

• Handle phone calls, emails, and complaints professionally.
• Draft letters, memos, and reports as needed.

4. Record Management:

• Update maintenance records, schedules, and department files.
• Ensure proper documentation of contracts and organizational charts.

5. Support and Reporting:

• Assist in preparing and submitting monthly reports.
• Order and manage maintenance supplies and tools.

6. General Assistance:

• Perform tasks assigned by supervisors or managers.

Qualifications:

• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Strong organizational and communication skills.
• Ability to multitask and work in a team environment.
• Prior administrative or technical support experience is a plus.

Key Attributes:

• Positive attitude and proactive problem-solving.
• Attention to detail and time management skills.