Required Key Skills

· Good knowledge in implementation and maintenance of Cisco Routers and Switches of all series.

· Good knowledge in Cisco IOS

· Average knowledge in implementation and operations support of NAC (network access control)

· Average knowledge in Wireless Network / Access Points / Controllers support and troubleshooting

· Good understanding of the OSI or TCP/IP model

· Provide Level-1 support and troubleshooting to resolve issues

· Preferred CCNA certification

· Knowledge on monitoring, network diagnostic and network analytics tools

· Preferred knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Aruba ClearPass, Cisco ISE

24*7 Support

Hospital environment

Priority Tasks

· Workplace is at customer premises and staff has to follow instituted Workplace securities

· Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual

· Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.

· Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment

· Perform periodic OS upgrade and Patching as and when required.

· 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.

· Assist Level 2 engineers in with first level Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem

· Assist Level 2 engineers in providing proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours

· Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported

· Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM

· Provide multi-vendor equipment support across a wide range of models and types of networking equipment

· Maintain the inventory of certificates and install/update/renew certificates as and when required.

· Maintain/Update inventory list and compliance related databases or similar Databases.

· Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date

· Maintain the IP address inventory and allocate new IP address when required by business.

· Engage third part vendors to resolve hardware issues and follow up till closure

· Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

EA License No. - 14C6941

• Responsible for the overall management and implementation of projects
• Plan and prepare work schedules when the projectis awarded
• Coordinate and manage activities of the vendors and sub-contractors to ensure quality standards are met
• Ensure documentation from vendors and sub-contractors are in-order i.e. Technical Submission, Material Submission, etc
• Constantly monitor the progress of projects and provide management and clients’ with regular progress status reports
• Conduct regular site walks and manage work schedules to ensure smooth progress and timely delivery of projects
• Anticipate issues/problems that could arise and provide solutions to solve them
• Prepare test scripts, schedule, and reports for Factory and Site testing and send an invitationto clients for all witness testing.
• Coordinate with consultant or clients for Integrated Services Test (IST) and prepare all vendors, sub-contractors and internal departments for the test.
• Work with CAD department to highlight any discrepancy in construction drawings and ensure accuracy in as-built drawings.
• Work with the Project Admin department to prepare OMM and handover certificates for assigned projects.
• Prepare system write-up for every discipline

Requirements

• Degree/Diploma in Electrical/Mechanical Engineering
• Fresh graduates are welcome
• 3-4 years’ experience in the M&E industry is an advantage
• Proficient in Microsoft Office i.e. Microsoft Word, Excel and Powerpoint.
• Possess knowledge in project management tools, solutions, andtechniques are highly desirable.
• Possess safety awareness at all time
• Familiar with Authority Requirement and Code of Practice is preferable
• Good interpersonal, communication and people management skills
• Able to work in a fast-paced environment and meet tight deadlines
• Able to commit to long working hours and responsive to sudden client’s request
• A team player who works well with all internal and external teams involved in the project.

Provide support to Facilities Manager in Facility Maintenance / Preventive Maintenance work.

• Liaise with customer engineering department to ensure company procedures and quality guidelines are followed.
• Review “Events and Actions” on site and implement remedial actions where needed
• Manage contractors work on site to ensure adherence to procedures
• To be involved and carry out planning, execution and updates for all daily work including routine report submission.
• To be involved in co-ordination and liaison on contractor works, which includes:
• Power Diversion,
• System power up and down,
• System roll in and out,
• Power tracing,
• Equipment data logging and encompassing all other minor works which contribute to the well-being of the Data Centre or Site.

Requirements

• Minimum Diploma in Mechanical or Electrical engineering (or related engineering field) and above.
• Fresh graduates are welcome
• At least 3 year experience of operating in and fitting our Data Centre Facilities is an advantage but not mandatory
• Able to work on odd hours as and when required
• License Electric Worker is an advantage but not mandatory
• Possess good practical knowledge of electrical and mechanical work
• Possess strong understanding of large-scale facility electrical infrastructure system
• Good written and oral communications skills, excellent interpersonal skills, ability to prioritize work efficiently and good team orientation.

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.

• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.

• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.

• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

Description

• Expertise in configuring, customizing, and integrating payment engines such as Global PayPlus (GPP), Finastra, and familiarity with API-based payment solutions.
• Synthesize intricate high-level requirements into actionable, product-specific deliverables. Drive gap analysis within payment systems, particularly for Global Pay Plus (GPP) engines, and leverage technical depth to integrate API-driven solutions for seamless global deployments.
• Navigate intricate vendor relationships, guiding them through RFPs and the selection of payment solutions, particularly for advanced capabilities like Virtual Account Management.
• Oversee sanctions compliance and payment risk mitigation strategies, ensuring all systems adhere to the most stringent global compliance standards.

We seek a highly skilled and experienced Facility Engineer to oversee the maintenance and operations of our facilities. You will play a crucial role in ensuring functionality, safety, and compliance while leading our maintenance team. The ideal candidate will have a strong technical background in mechanical or electrical disciplines and extensive experience in facility management and supervision. Proficiency in English and Mandarin, along with excellent communication and negotiation skills, is essential for liaising with contractors, local authorities, and stakeholders.

RESPONSIBILITIES

· Oversee the maintenance and repair of facility systems, equipment, and infrastructure.

· Supervise contractors, including negotiating pricing, scheduling, and quality control.

· Ensure compliance with local codes, safety regulations, and environmental standards.

· Prepare reports on maintenance activities, budget expenditures, and project progress.

· Serve as the primary contact for local authorities, obtaining permits, and ensuring regulatory compliance.

· Develop and implement emergency response procedures.

· Lead and mentor the facility maintenance staff, providing guidance and training.

JOB REQUIREMENTS/QUALIFICATIONS:

· Diploma in Mechanical or Electrical discipline or certification in facility management.

· Minimum of 5-7 years of experience in facility management, with supervisory roles.

· Proficiency in English and Mandarin, with strong communication skills.

· Ability to write reports, plan schedules, negotiate prices, and supervise contractors.

· Familiarity with local codes, safety regulations, and environmental standards.

· Class 2 or 3 driving licence required for travel to various facilities.

ATTRIBUTES:

· Ability to lead and motivate teams, fostering accountability and teamwork.

· Strong analytical and problem-solving skills.

· Flexibility to adapt to changing priorities and deadlines.

· Meticulous attention to detail for accurate documentation and compliance.

· Excellent organisational skills to manage multiple tasks and projects.

· Clear and effective communication skills for conveying technical information.

• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure), and technologies associated with the ISP market
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• Network Automation: Python & Ansible
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Certification: CCNP/CCDA equivalent
• Meraki, Palo alto, f5 loadbalancer, UTP
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP

• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure), and technologies associated with the ISP market
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• Network Automation: Python & Ansible
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Certification: CCNP/CCDA equivalent
• Meraki, Palo alto, f5 loadbalancer, UTP
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Main Duties:

• Supervise & Lead QA/QC day to day activities including installation and coordination with consultants, main contractors and subcontractors.

• Prepare the ITP by studying project plans and specifications; calculating time requirements; sequencing project elements.

• Controls and implement Quality plan by reviewing material and test specifications, and plan and schedule changes; recommending actions.

• Check, confirm all Quality documents and specifications are complied with ALSg standards.

• Attend the weekly and monthly project meetings to update the status and activity of the project.

• Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

• Manage quality control of all construction and testing of the install facilities, equipment and systems.

• Maintains site Quality Standards by enforcing internal procedures, rules, and regulations.

• Maintains product and company reputation by complying with state and company policy and regulations.

• Contributes to project team effort by accomplishing related results as needed.

• Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.

• Willing to work late or during weekends when required.

• Attend Toolbox meetings with project team onsite.

• With sound knowledge of process piping installation and equipment installation.

• Able to work with the project team in Piping layouts and design specifications.

Qualifications:

• Graduate of Bachelor's degree in Mechanical or equivalent engineering education.

Skills required:

• More than 3 yrs experience working on site installation and Greenfield project environment.

• Experience working at process/equipment construction site, plant installation, EPC, or equivalent.

• With experience in generating ITP and specification document

• Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.

• Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.

• Proficient with Microsoft office application and Microsoft project or equivalent and familiar with Google doc

• Familiar with Singapore and international codes /Regulations related piping, construction

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Responsibilities:

• Duties include, but not limited to application support, troubleshooting, advise customers on technical and application issues, preventive maintenance, repair and calibration activities
• Able to complete administrative tasks associated with service field, balance customer visits and requests, documentation and reporting to supervisors and management
• Apply your technical knowledge and experience to solve technical problems and perform complex repairs onsite, via phone or email
• Travel to customer sites for repair and preventive maintenance
• Assure that repair, calibration and service work is performed in compliance with the manufacturer specification
• Establish and maintain positive relationships and promote service products

Requirements:

• A background of Chemistry with minimum 2 years’ experience in analytical instrument field, calibration, troubleshooting and repair of instruments
• Strong computer, communication and customer service skills
• This position requires a highly motivated individual that is capable of completing assigned tasks with little supervision
• Possess valid driving license

Salary will commensurate with qualifications and experience. Interested candidates are invited to write in with full curriculum vitae, current and expected remuneration, recent photograph and contact numbers to:

Responsibilities

• Global production service operations support in middleware technologies and platforms.
• Accountable for the overall service reliability, availability and stability of the technical scopes.
• Provide technical expertise for managed workloads, including troubleshooting, analyzing and resolving incidents, problem, service request and change management process.
• Partner with the development, project and business teams to understand requirements and technical specifications to participate in project deliverables activities.
• Drive through culture of continuous improvements for the production environment through automation or manual work and performance hygiene.
• Technical analysis of production platforms to identify and remediate performance issues.
• Work collaboratively in teams and develop meaningful relationships to achieve common goals.
• Operation and further development of middleware platforms and the associated interfaces
• Development of self-service interfaces and their workflows.
• Exercise specialist responsibility in strategic projects and initiatives.

Requirements

• Minimum Bachelors Degree in Computer Science / Information Technology / Computer Engineering or equivalent
• Minimum 4 years of experience in the following technical platforms:Operating Systems: Linux, Unix and/or Windows
  Middleware Technologies: BMC Control-M, Axway CFT/Secure Trasnsport/Sentinel
  Monitoring and Data analytics tools: OMI, ServiceNow, Geneos
  Scripting tools: Java, Unix Shell, Python, PowerShell, perl
• Good understanding of ITIL Service Management framework such as Incident, Problem, and Change processes
• Experience in one or more of the following technical platforms:Kubernetes, Ansible, Elastic Search, Rundeck, GIT
• Ability to work in shifts and support On-call in rotations.
• Excellent communication (written and verbal), interpersonal and logical skills.
• Customer oriented and a strong team player.
• Ability to work in a team and individually.

Advantage if you have the following:

• DevOps tools & framework experience
• BMC Certified Service Professional in Control-M Version 9.
• IBM MQ
• Experience working in the banking / financial institution
• French language proficiency

Next Step

• Prepare your updated resume and expected package.

• Simply click on 'Apply here' or email to [email protected] to drop your resume

• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241.

Roles & Responsibilities:

• Designing, implementation, planining on-premises environment to public cloud providers like AWS, Azure, Oracle
• Managing Kubernetes pod rotation, Scaling of Kubernetes deployments, Kubernetes labels and namespaces.
• Monitoring the Application Infra related Incidents/alerts from the multiple monitoring tools like Tivoli, Sensu, Onecheck
• Handling automation via shell scripts
• Responsible for impact analysis and design modifications to existing systems to support new solution
• Provide technical support to software users
• Perform troubleshooting/Automate operations using AWS System Manager
• Collaborate with software engineers to ensure that code is of the highest quality
• Performing the changes related to the application via the servicenow change management tool.

Requirements:-

• Bachelor’s degree in Information Technology, Computer Science, or related field.
• 5 to 7 years of experience in software enginner or software development role or similar related role.
• Experience that will demonstrate proficiency and ease with one or more programming languages, scripting languages and operating systems.
• Solid hands-on development experience in technologies like AWS, cloud, oracle ,API and related technology stacks
• Experience in Automation using Slack Bot and Slack API.
• Strong foundation expected in Application hosted in the AWS cloud environment using cloudwatchwolf
• Strong designing, analytical, programming & communication skills needed, along with aptitude for building stable solutions.
• Expertise in Unix Shell scripting and automation via shell scripts.
• Demonstrable experience utilizing object-oriented patterns and design best practices is a strong plus.
• Exposure to tools like Linux(RHEL) , (CENTOS, UBUNTU; Windows servers Client is desired. UNIX skills are required.
• Experience in other AWS services like CDN, EFS, ACM, WAF, Route 53, SES[Email service] Storage Gateway
• Supporting Apache webserver & MySQL

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

Responsibilities:

• Electrical and Mechanical Design for IoT sensor systems.
• Provide technical support and design for site installation of IoT systems.
• Support Project Manager in technical reviews and discussions with customers, subcontractors, and suppliers.
• Manage work plan and budget.
• Prepare project documents and reports for submission.
• Ensure cost-effective execution of deliverables in accordance with contract specifications, schedule, and safety requirements.
• Manage site installation and commissioning works.

Requirements:

• Diploma in Electrical / Mechanical Engineering or equivalent.
• 3-5 years’ experience in engineering projects.
• Experience in System Integration, Automation, Electrical or Mechanical environments will be preferred.
• Candidates with experience in working with water supply and distribution systems will have an advantage.
• Able to multi-task and work under tight schedules.
• Strong project and people management skills.
• Excellent command of both written and spoken English.

Degree in Mechanical / Electrical must

Able to manage project / office works

Able to read building mechanical, electrical drwings

Prepare tender, quotation for clients

Preparation of monthly claims

Preparation of daily,weekly, monthly work progress

Attend site, consultant, tender meetings

Familiar with MS Office

Class 3 license

Pick up / drop worker in the early morning and night time after works

Able to work week ends and public holidays for shutdown jobs

Good interpoersonal and communication skill

Basic understanding of BIM

Able to draw autocad drawings

Minum 5 years of experience in construction M&E industry

• Monitor contractors' daily activity, site progress, schedule and safety on site
• Carry out administrative works and other duties as required by QP/Superintending Officer/Consultant/Employer
• Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.
• Must familiar with Singapore code of practice (COP), regulations and statutory requirements.
• Highlight discrepancies, feedback site progress and non-conformances/irregularities to QP/Consultants/Employer.
• Assist in reviewing of contractor's method statements and working procedures and assure contractor followed on site.
• Prepare lists of defects, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified.
• To ensure all the construction works have complied statutory requirements