Resident Technical Officer (M&E)

Responsibilities:

-Inspection and supervision of M&E works as required under the project and mandated under the Building Control Act & Regulations.

-Inspect and conduct all required tests for the project.

-Preparation & issuance of site memos on bad workmanship & non-compliant works.

-As-built drawings checks.

-Monitor progress of the works on site and at any off-site manufacturing facilities and report delays immediately.

-Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

-Attend and witness all on-site testing of architectural works as required by the Client and authorities.

-Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.

-Inspect the completed works and record all defects for rectification before handing them over to the Client.

-Others duties and responsibilities listed in project's contract.

Job Requirements:

-Candidate must be registered with BCA/IES as Resident Technical Officer

-M&E RTO shall be accredited with the Joint Accreditation Committee of the Institute of Engineers Singapore and the Association of Consulting Engineers.

-At least 3 Year(s) of working experience in the related field is required for this position.

-Required Skill(s): Supervision of M&E, building and construction works.

-Must attain certification in "BCSS" and "Develop a Risk Management Implementation Plan (bizSAFE Level 2)".

-Preferably Executive specialized in Engineering - M&E or equivalent.

-Good communication skills

The Resident Technical Officer shall be directly responsible to the Consultant (Architect) / Project PM for the duration of the construction of the Works.

Shall assist in the supervision of the construction of the Structural Works under the Building Control Act and to render all assistance as may be required by the Consultant (Civil & Structural Engineer) and the Consultant (Mechanical & Electrical Engineer). For HDB Project Civil & Structural / Architectural Works:

Diploma in Civil Engineering or Structural Engineering or equivalent.

Registered RTO accredited by the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES).

Preferred applicants with Certificate in Building Construction Safety Supervisors Course.

Ensure that building contractor embrace good construction practise to achieve good workmanship.

Minimum 5 years relevant experience in supervision of building projects in Singapore.

Must have HDB/ BTO projects with commercial buildings supervision experience.

Availability to commence work on short notice.

Able to work night shift and rotational Sunday duties.

DSTA & CAG project experience is preferred.

Technical Manager

Lead the technical management of our fleet, ensuring operational efficiency, safety, and compliance with regulatory requirements.

Key Responsibilities

• Lead technical superintendents during emergencies and critical situations.

• Manage technical aspects of fleet operations, including maintenance, repair, budgeting,

and surveys.

• Ensure vessels are technically operational and managed according to company

requirements.

• Foster a sense of ownership and accountability within the technical department.

• Oversee dry-docking, repair quotes, and shipyard selection.

• Source technical and operational supplies, ensuring economical rates.

• Perform evaluations, audits, and investigations to ensure technical compliance.

• Enhance safety practices within teams and ensure technical superintendents prioritize

safety.

• Collaborate with the HSE Management team to implement QHSE systems and policies.

• Ensure compliance with quality and safety management standards.

• Maintain vessels' zero loss time accident record and report incidents.

Requirements

• COC Class 1 with 5 years of experience in a similar capacity.

• Strong leadership, organizational, and communication skills.

• Independent, resourceful, and able to work under pressure.

• Analytical and proactive in technical trouble-shooting and problem-solving.

• Familiarity with ISM/ISPS.

• Ability to travel with short notice.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Project Location: Seletar Mall

Includes Night Shift work

Job Description:

• Assist the Job Manager to attend to technical and design issues at site and report issues to Job Manager.
• Provide standing supervision as and when directed by the Resident Engineer and/or Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in March 2025.

Requirements:

• A registered Resident Technical Officer with IES / ACES is an added advantage.
• Minimum 5 years’ experience as a Resident Technical Officer on local projects.
• Experience in Plumbing and Sanitary projects will be added advantage
• Experience in supervision of Mechanical Services installation for local Hospital/Healthcare/Commercial Developments would be added advantage
• Familiar with local codes and regulations
• Ability to respond to technical questions
• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution is an added advantage

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

We are seeking a dynamic and personable Technical Stylist to join our team. This role will require someone who has great interpersonal and communication skills, is highly detailed and meticulous. As a Technical Stylist, you will combine your garment expertise/problem solving skills with your love for people to deliver outstanding customer service.

Key Responsibilities:

1. Bridal Gown Fittings:
   • Assist brides during gown fittings, providing expert advice on fit, style, and alterations.
   • Ensure gowns are properly adjusted for comfort and appearance during appointments.
   • Collaborate with the alterations team to communicate fitting requirements and customizations.
2. Client Interaction:
   • Build rapport with brides and their families, creating a welcoming and fun environment.
   • Provide thoughtful and professional styling advice tailored to each bride’s preferences and body type.
   • Manage appointment schedules and follow up with clients to ensure a smooth fitting journey.
3. Garment Expertise:
   • Understand bridal fabrics, gown construction, and embellishments to provide expert recommendations.
   • Inspect gowns for quality and readiness before fittings.
   • Troubleshoot and suggest creative solutions for any fit or design challenges.
4. Customer Experience:
   • Maintain a high level of professionalism and positivity in all client interactions.
   • Handle questions, concerns, or special requests with tact and efficiency.
   • Ensure each client leaves with a memorable and delightful experience.

Requirements:

• Good understanding of garment construction, fabrics, and bridal fashion trends.
• Excellent communication and interpersonal skills.
• Outgoing, fun-loving personality with a natural flair for connecting with people.
• Passion for delivering exceptional customer service.
• Ability to work in a fast-paced, detail-oriented environment.
• Previous experience in bridal, fashion retail, or tailoring is a plus.
• Availability to work weekends and evenings as needed.

Why Join Us?

• Be part of a close-knit team passionate about creating joyful memories for brides.
• Work in a beautiful boutique environment surrounded by stunning gowns.
• Opportunities for professional growth and development within the luxury bridal industry.
• Competitive compensation and benefits package.

How to Apply: If you are enthusiastic, personable, and have a keen eye for detail, we would love to hear from you! Please send your resume and a cover letter with a paragraph detailing your relevant experience and why you’re a perfect fit for this role to [email protected]indicating SALES CO-ORDINATOR_NAME as the subject title.

# Working location in the West

# Salary up to S$3800 per month

# 5-day work week: Mondays - Fridays, Office Hours

Our client, an educational institution is currently seeking a candidate to join them as an Events Technical Officer.

Job Responsibilities:

• Act as the technical operator and provide technical support for the school’s events (e.g. setting up/taking down equipment, assisting with event publicity, performing post production)
• Supporting the school in technical and administrative areas for the Events Unit
• Maintain technical equipment and ensure that it is accounted for
• Maintain and support the school's website and social media page

Job Requirements:

• Diploma with minimum 2 years’ relevant experience
• Proficiency in MS Office applications
• Proficiency and expertise in events-related AV or IT knowledge is preferred

Looking for a new job or career opportunity? Please email your detailed resume in MS Word Format to [email protected]

Tammi Ng Yi Ning (Ms.)

Talent Acquisition Consultant

CEI Registration No.: R24119611

Personal Data Protection

"By submitting your curriculum vitae or disclosing your personal information in connection with your job application, you are deemed to have read and agreed to the terms of our Privacy Policy, and consented to the collection, use and disclosure of your personal data by us, in accordance with our Privacy Policy. Please access our website at www.celecti.com.sg for a copy of our Privacy Policy.”

Job Description

• Industry/ Organization Type: IT/ Cybersecurity
• Position Title: Technical Support Officer (SSL)
• Working Location: Tai Seng
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + AWS + 1 to 3 months VB
• Duration: Permanent

Key Responsibilities

• Interact with customers, resellers, and partners to identify and resolve technical issues.
• Provide first-level technical support for Secure Socket Layer (SSL) certificates via phone and email.
• Coordinate and escalate complex technical issues to the team and/or partners when necessary.
• Document issues encountered and their resolutions for tracking purposes and future reference.
• Conduct basic SSL technical support training for the Sales Support Team.
• Perform any other ad-hoc duties as required.

APPLY NOW!!!

• Minimum NITEC in IT/ Computer Science or its related discipline, with at least 1 year of relevant work experience.
• Strong SSL product and technical background is required.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71349 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Key Responsibilities:

• Spearhead, plan, and oversee the management of building defects and conversion works to meet asset objectives and ensure high standards across a diverse property portfolio.
• Collaborate closely with the in-house technical team, as well as external consultants and contractors, to assess and address building-related defects, offering practical solutions for rectification, operation, and maintenance of building facilities and systems.
• Source and manage consultancy services and contractors for the successful implementation of rectification and conversion projects.
• Review proposals from consultants for new developments, ensuring they meet functional and operational requirements for efficient building management.
• Take ownership of budgeting and cost control for repair and maintenance activities, long-term asset repair and replacement planning, and capital expenditure projects.
• Identify opportunities for new initiatives or automation processes, providing recommendations to enhance cost-efficiency and operational effectiveness across the portfolio.
• Offer expert guidance to the local team in addressing complex structural and mechanical challenges, ensuring timely resolution.

Qualifications & Requirements:

• A degree in Engineering (Electrical or Mechanical) or a related field.
• Minimum of 15 years of hands-on experience in building facilities management, project management, and integrated fit-out works.
• Strong proficiency in MS Office (Word, PowerPoint, Excel); experience with SAP is a plus.
• Fire Safety Manager certification is highly advantageous.
• Exceptional leadership, organizational, and communication skills, with the ability to foster strong working relationships.
• Proven ability to manage multiple operations and projects concurrently, ensuring deadlines and objectives are met.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Purpose

Technical Officer (TO) works in a team to perform preventive and corrective maintenance of railway signaling and communications systems to improve its reliability. TO assists in the preparation of maintenance activities and is technically inclined and adept in handling electronics and computer-based systems and equipment for maintenance.

TO also supervises the works of contractors and external stakeholders to ensure adherence to operating requirements, quality standards and safety standards. O can communicate effectively within the team and able to multi-task and can prioritize assigned maintenance workload in supporting maintenance activities.

Duties & Responsibilities

1. Work in any of SMRT depots, tracks, and facilities, as assigned by supervisors.

2. Work in rotating or fixed shifts (i.a.w. MOM guidelines), as assigned by supervisors.

3. Perform Preventive and Corrective on railway infrastructure assets, as assigned by supervisors. (Training and qualifications will be provided by company).

4. Operate equipment, locomotives and/or specialized track maintenance vehicles within depot and mainline tracks, as assigned by supervisors. (Training and qualifications will be provided by company).

5. Ensure the railway infrastructure system defects are identified, classified, and mitigated/rectified promptly.

6. Ensure that railway infrastructure defects are recorded and reported accurately in accordance with the maintenance procedures or OEM technical manual.

7. Ensure all works are done in a safe manner in accordance with the organisational procedures or OEM technical manual.

8. Ensure that the railway infrastructure system defects and maintenance records are properly documented and updated in the Maintenance Tracking System.

9. Assist supervisor to conduct training as required.

10. Perform Possession Master (PM) / Person-In-Charge (PIC) / ground shunter duty, as assigned by supervisors. (Training and qualifications will be provided by company).

11. Operate company forklift and/or aerial work platform, as assigned by supervisors. (Training and qualifications will be provided by company).

12. Drive company vehicle for the purpose of work. (For holders of Singapore Driving Licence. Familiarisation and authorisation will be provided by company).

13. Observe and report any safety concerns at the workplace.

14. Undertake any other tasks or functions that are supplementary to the performance of the works, as assigned by supervisor. (Training and qualifications will be provided by company, as required). Examples include (but not limited to):

a. Responding to emergency operations

b. Assist in the execution of projects including testing & commissioning, attendance to contractors, etc

c. Supervise contractors' work

d. Preparation of reports

e. Provide logistics support

f. Housekeeping

Physical Requirement

1. Able to work on a Shift Roster system in accordance with the MOM guidelines and Collective Agreement.

2. Able to work in harsh environment with present of dust, oil, grease etc.

3. Able to work at height.

4. Able to climb staircase ladders, work undercarriage in limited space, squat and stand for long duration up to 4-6hours.

5. Able to lift, carry and install heavy tools/equipment up to 15kg.

Qualifications and Work Experience

1. Higher NITEC in Electrical Engineering, Electronics Engineering, or equivalent

2. Preferably 2 years’ experience in a maintenance environment

Job Description

• Managing the onsite delivering of software services, pre-sales, post-sales or service delivery support, installation and configuration for customer environments.
• The jobs solve various business systems, networking and applications problems for standard industry servers, specialized or complex clustered environments.
• Deliver reactive and proactive activities according to Service Level Agreement to ensure customer satisfaction and loyalty.
• Provides direct post-sales systems on site technical support for reactive and proactive customers.
• Each position maintains a high level of customer satisfaction by ensuring clear business and technical solution alignment, clarifying customer needs and ensuring that they are met.
• Responsible for Customer Experience as well as the revenue growth, profitability, and account retention.
• Applies developed subject matter knowledge to solve common and complex business issues within established guidelines and recommends appropriate alternatives.
• Works on problems/ projects of diverse complexity and scope.
• Exercises independent judgment within generally defined policies and practices to identify and select a solution.
• May act as a team or project leader providing direction to team activities and facilitates information validation and team decision-making process.
• Ability to handle most unique situations.

Job Description

• Carry out full time supervision for construction of structural works in accordance to BCA approved structural drawings in compliance to Building and Control Act and regulations
• Check that requirements of specifications in regards to materials and workmanship are complied with the project specifications by the Builders. Ensure high quality control for all civil and structural as well as architectural works to be carried . This includes sample tests for materials and workmanship etc
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect / Engineers for issuance of Architect’s Instruction or Architects' clarification
• Work under the direction of RE, PE and Architect for site organisation, allocation of duties and tasks and coordinate with Architect for M&E services and structural design that affects architectural and ID works.
• Participate in Client/Consultant's site meeting and technical meeting if required by RE
• Vet and signoff inspection forms and quality related issues including all dry-lays, trade demonstrations, method of statements, mock-ups, defects inspection and rectification follow-up to sign-off, M&E testing and commissioning, handover to client.
• Check architectural and ID works and intent of design details are followed. To notify Architect of any design intent conflicts and quality variations, illegal works.

What you will need:

• Registered with IES-ACES Joint accreditation Committee ( JAC ) as Resident Technical Officer with a minimum diploma in Civil Engineering or equivalent qualification
• At least 5 years or more relevant experience
• Experience in precast RC piling works and structural steel buildings are preferred
• Comfortable for Project Site at Tuas South

We are hiring a technical support sepcialist with following Skills with 5 years’ experience ( awning Pipe, Steel, beams,installation of small construction equipments)

1 Able to read and interpret structural drawing for awning and steel work .

2 Take onsite measurement

3 Cut and fit material (as per drawing)

4 Able to weld material

5 Have valid Singapore class 3 driving license

6 Other job tasks when allocated by supervisor

7 Good knowledge of gas cutting and handle torch.

8 Able to do long working hours (able to work on Saturday and Sunday )

9 Able to carry weight manually ( 20KG to 25 KG )

10 must have construction safety supervisor course.

11 open for all nationality (Singaporean/ PR are preferred)

Send your Resume to: [email protected]

We are looking for a few Technical Leads to work on a banking project.

Job Description & Requirements

Responsibilities:

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options, and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree and 10-15 years of technical experience within architecture development, integration of backend systems and development. Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Micro services, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.

Argyll Scott Consulting Pte Ltd

Job Description

• Industry/ Organization Type: IT/ Cybersecurity
• Position Title: Technical Support Officer (SSL)
• Working Location: Tai Seng
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + AWS + 1 to 3 months VB
• Duration: Permanent

Key Responsibilities

• Interact with customers, resellers, and partners to identify and resolve technical issues.
• Provide first-level technical support for Secure Socket Layer (SSL) certificates via phone and email.
• Coordinate and escalate complex technical issues to the team and/or partners when necessary.
• Document issues encountered and their resolutions for tracking purposes and future reference.
• Conduct basic SSL technical support training for the Sales Support Team.
• Perform any other ad-hoc duties as required.

APPLY NOW!!!

• Minimum NITEC in IT/ Computer Science or its related discipline, with at least 1 year of relevant work experience.
• Strong SSL product and technical background is required.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71349 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• To perform all roles and responsibilities required of site supervisors under the Building Control Act. Please refer to Annex A for more details on the list of responsibilities for RTOs.
• To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the Client, PM, SO, SOR and QP to ensure that works are constructed to required quality and accuracy.
• To monitor progress of the works on site and at any off-site manufacturing facilities and ensure that the site programme is in accordance with the approved construction programme. Any deviations from the construction schedule shall be reported immediately to the Client, PM, SO, SOR and QP. In the event of delays, the Resident Technical Officer shall assist the contractors to mitigate delays but without comprising on the quality.
• To ensure and maintain proper updated records of all works done, including records of tests, inspections, status of works, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities, etc and all other records as directed by Building Control Authorities.
• To study the contract documents and drawings and verify if there are any discrepanciesamong the drawings. All discrepancies shall be brought to the attention of the Employer concerned.
• To ensure that all installation methods and material used are in accordance with the contract drawings and specifications, and report to Client, PM, SO, SOR and QP on any materials that are not conforming to the specifications
• To liaise with the Main contractor and the Architect / M&E / C&S Engineer in the checking and approval of shop drawings, catalogues and samples.
• To liaise with the Main contractor in resolving site problems. All problems on site shall be referred immediately to the Client, PM, SO, SOR and QP. The Resident Technical Officer shall issue sketches or directions as and when necessary. All site memos shall be copied to the Employer.
• To ensure that the Main contractor comply with the Ministry of Manpower’s guidelines and recommendations for construction safety and the owner’s in-house safety management system.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings.
• To follow up and report to relevant Employer within three (3) days for site issues raised during the meetings.
• To manage the team of supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements and supervisors’ overtime claims.
• To ensure that all reinforcement, formwork, penetrations, etc. are finally checked prior to concreting. All concrete pours during office hours and all critical pours even after office hours shall be supervised by you personally (i.e. standing supervision).
• To record collate and file all incoming and outgoing design, shop, construction and coordination drawings. All old construction drawings shall be stamped ‘superseded’ and no checking shall be carried out on the superseded drawings.
• To generate defects list, supervise and monitor progress of rectification works and ensure that all defects are rectified as per Employer’s advice.
• To advise the Employer on the percentage of works completed for the purpose of verifying progress payment valuation, and to check contractor’s claims and variation orders.
• To ensure that the contractors record accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site. Also to check against the Employer’s drawings and identify and highlight the changes of variation orders so that Employer can direct the contractor to finalise the as-built drawings and to maintain a set of updated drawings on site.
• To check on quality of materials delivered to site and report to Client, PM, SO, SOR and QP of any materials that are not conforming to the specification. And to verify reports and claims submitted by contractors and to certify and sign on Delivery Orders
• To submit daily reports and updates to HDB based on an approved format. This will include and not limited to daily noise meter readings, daily safety and manpower reports.

Qualification

• Diploma in Civil/Structural Engineering or an equivalent certificate from a recognized institution/university or acceptable to the Commissioner of Building Control.
• Registered RTO (with BCA / IES / ACES) with Min. 5 years of RTO experience, institutional Project working experience preferred
• Good understanding in construction drawings and specification for Structural and / or Architectural works
  Familiar with Singapore Building Control Act and Construction Regulations.
• Good knowledge or experience in several aspects of construction activities
• Experienced in Coordinating Architectural / Structural works with project team
  

Technical Manager (Electrical)

• Working Day: 5.5Days | 8.30am to 5.30pm (Mon – Fri), 8.30am to 12.30pm (Sat)
• Project Location: East, at Changi area
  Salary: $6,000 - $9,500

Requirements

• Degree in Electrical Engineering or any other relevant field with relevant design working experience
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore

Responsibilities

• Develop and implement successful design strategies and implement them for the project
• Ensuring that the multi-disciplinary teams building the project work together smoothly and that everything is delivered on time and within budget
• Overseeing the design process using technical expertise
• Advising on the selection of materials used and other aspects of procurement
• Working with clients to ensure that their expectations are met
• Reviewing designs with health and safety in mind
• Ensuring strict compliance of the design in accordance with contractual requirements and Singapore standards.
• Maintaining thorough documentation of the design process
• Managing processes relating to the project’s design to ensure that everything is delivered to schedule and budget
• Keeping up to date with changing building legislation and codes of practice relating to design
• Prepare and submit Single-Line Diagrams (SLD) and Drawings for FAT.

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Reputable MNC company
• LTA Projects
• Alternate 6 Days

Responsibilities:

• Inspection and supervision of Archi work, including but not limited to ALC wall & drywall, off-site precast toilet units, off-site precast façade panels factory, epoxy flooring, vinyl flooring, carpet flooring, plastering, painting, raised floor system, ceiling, screeding, tiling, waterproofing, room handover, defects, auto-door testing, lift interior, & resolving conflicts between Architectural, Structural & M&E works.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

Requirements:

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.
• Able to work alt sat work week.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Responsibilities

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents, and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Consultant / Qualified Person as stated below:
• Check shop drawings submitted by contractor.
• Check as-built drawings and Operation & Maintenance Manual submitted by contractor.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.

Qualifications

• Possess Diploma in Civil Engineering.
• Registered Resident Technical Officer with IES / ACES.
• Minimum 3 years’ experience as RTO in supervision of works similar in nature to major construction works in buildings, civil, HDB carpark.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Technical Writer with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Regulatory Documentation
• Standard Operating Procedures (SOPs)
• Clinical Trial Documentation
• Technical Reports and Writing
• Quality Control and Documentation Review
• Cross-Functional Collaboration
• Research and Data Interpretation
• Training Materials Development
• Documentation for Internal and External Audits
• Risk and Compliance Management
• Technical Assistance and Consultation

Qualifications:

• Graduate of Bachelor of Science in Pharmacy or any related field
• Proficient in English
• Previously working as a technical writer in pharmaceutical company/Life Science is highly advantageous.

This role is for 6 months contract and may be extended if performance is satisfactory.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Technical Superintendent x2

Summary:

The Technical Superintendent is responsible for technical operations of the assigned oil tankers.

Reports to: Vessel Manager / Technical Manager

Responsibilities:

• Ensuring vessels meet technical standards and performance requirements

• Maintaining up-to-date certificates and documents

• Implementing planned maintenance systems

• Managing surveys, dry-dockings, and repairs

• Reviewing and promoting crew performance

• Managing technical budgets

Requirements:

• Tanker seagoing experience as a Chief Engineer or Second Engineer (at least COC Class

2 or 3), or at least 2 years of experience as technical superintendent for oil tankers and

bunker tankers.

• Strong sense of integrity and professionalism.

• Excellent leadership, teamwork, management and communication skills.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

This role involves implementing and maintaining CI/CD pipelines, managing cloud infrastructure, and providing operational support.

Responsibilities

• Implement and manage continuous integration and continuous deployment (CI/CD) pipelines to streamline software delivery.
• Utilize cloud platforms Azure, or GCP to manage and optimize cloud infrastructure.
• Automate deployment, monitoring, and infrastructure management tasks to improve efficiency and reliability.
• Continuously monitor system performance and reliability, responding to incidents as needed.
• Work closely with development teams to ensure smooth and reliable software releases.
• Ensure security best practices are followed across infrastructure and applications.
• Create and maintain detailed documentation of processes and procedures.

Skills Requirement

• Bachelor’s degree in Computer Science/Information Technology/Engineering/related field.
• 4-6 years of experience in a DevOps or as an SRE.
• Proficiency with cloud platforms (Azure, GCP).
• Strong scripting skills - Python, Bash, Shell.
• Deep understanding of CI/CD principles and tools (e.g., Jenkins, GitLab CI/CD).
• Experience with containerization and orchestration tools (Docker, Kubernetes).
• Knowledge of version control systems (e.g., Git).
• Familiarity with infrastructure as code (IaC) tools (e.g., Terraform, Ansible).
• Proficiency with monitoring tools like Prometheus, Grafana, and the ELK stack (Elasticsearch, Logstash, Kibana) to gain insights into system performance and reliability.
• Experience with managing and optimizing databases (SQL and NoSQL) to ensure data integrity and performance.
• Strong understanding of networking concepts, including DNS, load balancing, and network security. Knowledge of network configurations and service discovery tools (e.g., Consul, Envoy).
• Familiar with programming languages such as Go, Java, or Ruby.
• Experience with configuration management tools like Chef, Puppet, or SaltStack.
• Good in incident response and management, including root cause analysis and post-mortem documentation.
• Understanding of distributed computing and cloud-native applications.
• Excellent problem-solving and troubleshooting skills.

Job Descriptions:

• Work as Resident Technical Officer to our LTA projects, to assist and report to RE and SRE to monitor all site activities, and any incident, including near-misses. Report any non-complianceto RE and Qualified Person Supervision (QPS).
• Assist Engineer in carrying out supervision for related works include but not limited to replacement and extension, construction and reconfiguration of viaduct/ bridge works, and associated civil works, proposed new flexible pavement and infrastructure, re-alightment of roadways, fencing and construction.
• Prepare daily reports at regular basic and as required by clients.
• Supervise all construction activities and ensure compliance to all plans/drawings, risk assessment and specifications.
• Willing to work on rotation shifts .
• Ensure compliance to all health and safety policies.
• Ensure that contractor and their subcontractor comply with client's safety requirement, and safety checklists are follow.
• Reject poor quality of works at site and inform RE to raise non-conformance notice.
• Assist RE to manage and maintain records and documentation on field or site changes and to monitor adherence to construction schedule.
• Carry out standing supervision for critical site activities based,
• Stationed fulltime on site, 44 hrs weekly. For RTO Tunnel: 56 hrs weekly.

Working Areas:

Full time at sites: Sin Ming Area; Tampinese North; and Serangoon North, Bright Hill MRT.