Job Description

• Researches, plans, coordinates and proposes original designs of mechanical products and systems. Performs testing of prototype and production equipment.
• Participates in customer and project review meetings relating to project assignments. Reports and presents information as required.
• Analyzes projects work scope to develop and coordinate design/drafting manpower requirements for project demand and scheduling.
• Assists in conceptual customer design proposal, identification of application. Prepares designs and layouts that define equipment concepts, or the basic functional characteristics of systems, components, structures or equipment.
• Leads design staff, on a project basis, in analyzing design alternatives. Suggests design options and prepares layouts illustrating the need of the customer.
• Review complete product layouts, working from detail drawings and sub-assemblies. Prepares and review all levels of engineering calculations.
• Create, check and review TCE and Engineering documentation through the ECN process
• Is responsible for project status for on-time delivery, productivity and quality and safety of design. Reports as required on assigned projects.
• Provide a link with the Product Groups to transfer new technologies or design improvement to the operations
• Follow all TFMC rules and procedures for Engineering, Quality, Environment, Health and Safety.
• Conducts and prepare design reviews
• Conduct SITs
• Goes on field assignments for new products installation and commission
• Provides technical support to manufacturing and marketing

Requirements

• Mechanical engineering degree (minimum honors, masters preferred) or minimum ten years related design/drafting experience within FMC engineering
• Knowledge of TFMC products and manufacturing processes or related experience preferred.
• Ability to perform high level engineering calculations.
• Experience in leading and supporting others in team building and time management skills.
• Skills include design, product knowledge, enabling technology, and computer skills.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations

• Delivery of technical presentations

• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members

• Supervision of construction, site inspection and training of constructors

• Preparation of technical submissions, proposals and documentation

Job Specifications

• Degree in Civil, Structural or Mechanical Engineering or related disciplines.

• 3 – 5 years of experience in façade design, engineering and construction and project management

• Proficient in CAD software to create designs and solve technical issues.

• Strong and diverse technical background with effective presentation skills

• Well-versed in construction trends, international design standards and building regulations.

• Possess a wide network of building professionals and property developers.

• Ability to multitask and work well in a team.

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software

• Possesses deep understanding about various façade materials.

• Well informed in construction trends, international design standards and building regulations.

• Demonstrate organisation and communication skills

• Possesses relationship building and networking skills.

• Skilled in interacting with people of diverse cultural backgrounds at various levels.

• Possesses strong project management skills.

• Willing and able to travel as needed (1 – 2 times/month)

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

Purpose: Responsible for reviewing customer supplied data and drawings; and the creation of manufacturing data, programs, tools, jigs and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.

Key Area of Responsibilities:

• Review customer (internal/external) supplied data and drawings to ensure that supplied information aligns with project requirements and standards.
• Create manufacturing data, programs, tools, jigs, and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.
• Perform machine simulation for all CNC programs to ensure error-free machining prior to release.
• Create detailed and clear shopfloor documentation such as machining setup sheets and tool list.
• Handle workshop feedback and troubleshoot problems relating to CNC machining, programming, and cutting tools in order to ensure parts are produced according to customers' drawings specifications.
• Manage revision control on the 3D model, drawing, program, tool list, and setup sheet documentation to ensure accurate records and allow all parties to follow the right revisions.
• Drive continual improvement on existing CNC program.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 5 years of working experience in the precision machining industry.
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Experience with 3D CAD, 3D CAM and simulation software (e.g. NX, and Vericut)
• Technical knowledge of cutting methodologies and cutting tools
• Experience with tool database software, automation, and post-processor development is advantageous.
• Problem Solving and Continuous Improvement

As a Fab 10 Facilities Operations Transformation Engineer, you will play a pivotal role in redefining our Facilities Operations to support our advanced memory and AI applications. You will lead multiple exciting programs aimed at improving team productivity and ensuring an uninterrupted supply of plant utilities and facilities services, operating 24/7 to support Fab Production. Your innovative mentality and passion will drive continuous improvement through data, automation, and enhanced operational strategies. You will have opportunities to work with people from various backgrounds and different responsibilities.

Responsibilities and Tasks:

• Drive improvements to all existing and future Operations programs, coordinating with all Facilities system owners from all sites in Fab 10.
• Lead Post Incident Review (PIR) processes to prevent facilities supply interruptions and ensure smooth execution of critical work through the Site Incident Prevention Plan (SIPP).
• Spearhead labor productivity improvement projects, using business process improvement and automation in daily operations.
• Area Quality Coordinator (AQC), leading quality improvement programs, includes: problem-solving, quality champion, and human deviation reduction.
• Represent Fab 10 in Global Facilities AQC and Operational forums to handle, lead, and facilitate all Global Facilities operations and quality programs.
• Learn and drive improvement to Facilities daily operations, including but not limited to:
• Supervise and handle facilities equipment's and system through FMCS or equivalent, like Life safety system.
• Respond swiftly to abnormal condition affecting production or the site in general and raise it to relevant parties accordingly.
• Reponse and restore facilities services in a timely manner to minimize interruption to production or the site
• Support and implement operating procedures and risk assessments for all facilities systems and facilities-related work activities.
• Follow up on incidents or service interruptions with system owners.
• Coordinate and connect with internal and external parties for facilities operation-related activities.
• Support the shift operations ERT (Emergency Response Team).
• Support Facilities Operation meetings with the Facilities Operations Manager.
• Coordinate, handle, and improve the work permit system.
• Act as a backup for the Site Operations Manager’s functional scope if required.
• Prepare and consolidate operation reports.

Requirements:

• Bachelor in Engineering (Mechanical/Electrical/Controls and Instrumentation) or equivalent experience.
• Have experience with Facilities systems in Semiconductor Industry
• Experience and familiarity with data analytics/automation software such as: Tableau, Microsoft Excel, Python, SharePoint, Power BI, SQL.
• Ability to handle multiple tasks concurrently, prioritize and handle workload.
• Fluent digital literacy, including word processing, spreadsheet, database.
• Team player who enjoys working in a cross-functional environment and the ability to develop long term partnership across teams.
• Positive, energetic, and daring to innovate with the drive to actualize concept into plan.
• Excellent problem solving and analytical thinking!

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Responsibilities:

· Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.

· Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.

· Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.

· Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.

· Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.

· Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

· Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.

· Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.

· Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).

· Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1) Strong programming skills in languages such as Python.

2) Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.

3) Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.

4) Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.

5) Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.

6) Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.

7) Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Job Functions:

• Collaborate with development teams to design, build, and maintain the Micro SaaS (Microservices as a Service)/LaaS (Logistic as a Service)/WMS (Warehouse Management System) website and its underlying platform components.
• Analyze and optimize web application performance to enhance overall user experience.
• Manage and maintain large-scale data suites on overseas cloud platforms, ensuring the stability and efficiency of data platforms and services.
• Monitor cloud resources, manage costs, and implement optimization strategies.
• Automating operations, performance tuning, troubleshooting and incident response, and cloud platform management

Education and Experience:

• Bachelor’s degree in computer science-related technical discipline, or equivalent practical experience; with minimal 2 years of working experience in Internet industry
• Proficiency in Java or TypeScript (Angular) for software development.
• Experience with K8S, Docker, SQL Server, MySQL, Redis, RocketMQ, and similar technologies.
• Familiarity with DevOps, SRE, and Scrum methodologies are plus.
• Experience in managing cloud platforms like Azure, AWS, or GCP.

Knowledge, Skills and Abilities

• Self-motivated, a good team player, and continuous improvement attitude
• Ability to read & communicate in Mandarin and English
• Good analytical and trouble-shooting skills.
• Effective communication skills and interpersonal skills.

• Hands-on and customer insights to operate/ administer a cloud infrastructure and firewalls.
• Configuration to high levels of performance, security, scalability, maintainability, aligning to design specifications
• Codify or implement/deploy configurations of automation by default in new projects with proper documentations
• Codify or maintain cloud systems using tools like Ansible, CloudFormation, Terraform
• Participate in Cloud Migrations for VMs using tools like CloudEndure with more than 50 VMs migration or Databases

Requirements:

• Minimum of 5 years IT working experience. Working exprience in cloud platform or tools
• Experience in operational/administration and deployment/migration projects in Cloud and Unix System administration
• Significant experience in problem solving, collaboration and communication, cloud technical expertise
• Experience in Networking skills is good to have

Kindly indicate 105 – Cloud Engineer on the subject

Interested applicants may send in their detailed resumes, with subject title: 105 – Cloud Engineer in MS Word format

(Reg. Nos. R1104128)

IT Consultancy & Services Pte Ltd

EA License No.: 92C5311

For more information about ITC, please visit us @ www.itcspl.com

Job Description

Analyze and design effective compiler optimization;

Implement or enhance code generation targeting mobile platforms;

Analyze and improve the efficiency of our toolchains and build systems with compiler techniques;

Collaborate with cross-product teams to deliver technical solutions and best practices.

Qualifications

Bachelor or above degree in computer science or a related technical discipline, with 5+ years’ experience as a software engineer and 3+ years leading a software engineering team;

Experience in mobile infrastructure, particularly in the compiler, performance optimization, quality, and development efficiency;

Proficient in (at least one): Java, C/C++,Python;

Skilled in building trust-based relationships with the team and fellow leaders;

Experience in managing a cross-regional team is a plus.

Workplace: Ang Mo Kio

Job Description:

• Manage the QA and QC activities of assigned projects to ensure systems meets the customer quality requirements
• Plan, conduct and monitor testing and inspection of Projects work products to ensure finished product quality
• Conduct internal Quality Audits
• Collect and compile statistical quality data
• Prepare reports to communicate outcomes of quality activities
• Coordinate and support on-site audits conducted by external providers
• Develop, monitor and recommend preventive actions
• Investigate customer complaints and issues
• Assist in drafting QA policies and procedures
• Interpret and implement quality assurance standards and procedures
• Analyze data to identify areas for improvement

Requirements:

• Quality inspection, auditing and testing experience
• Experience in software/system/product development lifecycle
• Knowledge of tools, concepts and methodologies of Quality Assurance
• Knowledge of relevant regulatory requirements like ISO 9001, ISO 27001 would be advantageous

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering (Marine Industry)
• Position Title: Mechanical Engineer
• Working Location: Gul Circle
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary up to $5,000 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years of ship repair experience in Singapore
• Able to work with tight schedules to accommodate ship arrival times
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site, on board vessels, and in workshops with occasional irregular hours

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67187 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Network Engineer
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Develop client business by exploring opportunities, guiding client needs, and designing solutions.
• Provide after-sales technical support to major accounts, including service management, channel management, pre-sales testing, project implementation, troubleshooting, and customer service planning.
• Coordinate resources (technical, sales, R&D, service providers) to ensure smooth project progression and address any issues promptly.
• Support client and market success by consolidating industry experience and standardizing knowledge through training and process improvements.
• Analyze the Asia-Pacific telecommunications market to understand demand, competition, and industry trends, and provide feedback to help the company gain a competitive advantage.

APPLY NOW!!!

• Diploma or higher in Computer Science, Information Technology, Engineering, or related field.
• Network-related certifications like CCNA, CCNP, and CCIE are preferred.
• 3-5 years of experience in network solution design or on-site delivery, preferably in the Singapore market.
• Experience in designing and implementing cloud data centers or campus networks.
• Proficiency in network protocols (BGP, OSPF, SSH, VRRP, STP, NetConf, HTTP/HTTPS, DNS, DHCP).
• Familiarity with network automation tools (Ansible, Terraform) and scripting (Python, Shell).
• Ability to troubleshoot complex network environments using tools like Wireshark.
• Deep understanding of network technology and industry trends in the Singapore market.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67599 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Service/Sales Engineer
• Working Location: Tuas
• Working Hours: 5 days (Mon 8 am – 5 pm, Tue – Fri 8 am – 6 pm)
• Salary Package: Basic salary up to $3,600 + Transport Allowances + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Attend to customer inquiries and requests for spare parts and services.
• Plan and execute sales action plans to engage and follow up with prospects.
• Assist in preparing proposals, tenders, and quotations.
• Build strong customer relationships and identify business opportunities within the industry.

APPLY NOW!!!

• Diploma or Degree (strong relevant experience required if no diploma).
• Good communication and presentation skills.
• Self-motivated to work.
• Possess Class 3 Driving License and own vehicle (preferred). Transport allowance provided if own vehicle is used.
• At least 1 year of sales experience in the Heavy Industry.
• Knowledge of ERP systems is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641