Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.

Mechanical Engineer Responsibilities:

• Analyzing problems and coming up with designs to solve them.
• Networking and collaborating with other engineers and professionals.
• Working within the budget to deliver safe and efficient products on time.
• Allocating resources and time effectively.
• Developing design prototypes.
• Attending meetings and providing input and updates.
• Analyzing data to write up reports.
• Communicating with staff, directors, and clients.
• Inspect, Repair, Overhaul Semiconductor Robot

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping, tank and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or master’s degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570 and API 653 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, tanks and columns.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

1. Promote and practice 5 "S" and the QEHS system procedures.

2. Take corrective steps on non-conformities which are reported and to solve the problems which impact the quality and delivery of service and products.

3. To counsel subordinates who violate company rules and regulations.

4. Lead team of men for site works as required.

5. On time delivery.

6. Promote & drive continual improvement programs.

7. Mentor new fitters and give guidance to update others on technological changes in our portfolio

To be successful in this role, we expect you to have:

• Supervisory Capacity with Minimum 5 years of Experience in Anchorage Engine works

• Knowledge & Experience of job cards

• Hands-On knowledge and experience in assembly/disassembly of engines

• To oversee packing standards to ensure compliance

• To conduct tool-box meeting with subordinates to disseminate information and instructions

• A diploma in marine engineering with shipyard experience

• Fruitful and Meaningful relationship with our customers

• A good attitude with willingness to learn

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Purpose and Scope

Provide technical support, performance and process expertise to ensure continued efficient operation, good plant availability, reliability and optimization as a member of the Engineering team.

Key Roles and Responsibilities

Technical Support

• Review technical documents.
• Work closely with operations, maintenance, business improvement, safety and procurement teams for improvement projects scoping alignment and execution coordination and review the selection of vendors.
• Review risk analysis on plant and equipment.
• Review the development and implementation of processes for asset integrity management systems.
• Facilitate the provision of discipline engineering support to plant O&M team to resolve issues that arise in the plant requiring expertise beyond the plant level and liaising with the OEMs/ vendors for problem solving. (eg. RCA)
• Formulate strategies for plant integrity and inspection with the maintenance team.
• Verify cross-functional integrity audit findings and recommend corrective and preventive measures.
• Drive equipment reliability and availability reviews to maximise equipment utilisation.
• Provide recommendations for equipment efficiency improvements, including new versus rebuilt equipment, existing versus new technologies and labour versus automation to achieve best value engineering solutions.
• Strategise the use of data analytics across the plant and derive actionable insights for alternative engineering solutions.

Performance and System Optimisation

• Monitor and analyse system performance, carry out troubleshooting and optimization (Steam production, Boiler etc).
• Work closely with the O&M team, establish and continuously improve the monitoring matrix to enable detection of short term and long-term process and performance abnormality.
• Lead the performance test data analysis, identify the gap and improvement area, recommend the actions for rectification and follow through the implementation for closure.
• Establish, improve and monitor the plant and system mass balance (heat, material, and water etc), identify the abnormality such as leaks, uncounted loss, meter/instrument inaccuracy, and efficiency deterioration etc. Lead and coordinate other stakeholders to rectify the issues.
• Provide technical expertise in the optimization initiative conceptualization and implementation. Keep track of the performance and cost savings benefits qualification and post implementation review of optimization initiatives.
• Provide technical and operation insight to support in plant improvement projects and new energy-from-Waste projects including process engineering review, calculations for mass/energy balances, equipment sizing, key equipment selection, material compatibility considerations and other duties assigned for process and engineering evaluation.

Qualification, Skills and Experience

• Bachelor’s Degree in Engineering or related field (Mechanical Engineering/ Chemical Engineering/ Electrical Engineering etc)
• Proven experience (minimum 5 years) in power/utilities plant operations and maintenance
• Experience in handling projects will be an advantage
• Knowledge of reliability methodologies, including FMEA, RCM, and condition-based maintenance
• Familiarity with relevant industry standards and best practices
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive attitude
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Job Description:

• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new developments
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level per Halliburton's Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in the preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions. Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standardsResponsibilities:
• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new development
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level in accordance with Halliburton’s Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions
• Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards

Key Responsibilities:

• Design, simulation, and implementation of high-temperature electronic systems, encompassing component selection, qualification, and PCB assembly practices
• Functional and qualification testing of the designed PCB boards and sub-assemblies
• Preparation of technical reports and presentations

Requirements:

• Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline.
• Basic knowledge of various filters, amplifier topologies, and architecture
• Ability to perform simulations to verify designs.
• Basic knowledge of ADC, DAC, LDO, and switching power supply topologies.
• Working knowledge in commonly used circuit simulators, such as LTSPICE, etc.
• Experience in using lab equipment, such as oscilloscope, etc
• Experience in common PCB design CAD tools, such as Siemens PADS, is an advantage
• Experience in MATLAB and LABVIEW is an advantage

Candidates that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, job opportunities might be available for the Senior Electrical Engineer role

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Work closely with customers to understand their current cyber operations and establish their cyber threat intelligence requirements
• Design operational use cases to adopt cyber threat intelligence in their operations
• Lead a development team and chart the product development roadmap
• Develop and customize plugins to adapt with COTS CTI Products
• Assist in training the machine learning model for the Artificial Intelligence (AI) Engine
• Work closely with project team to deliver project which includes system integration and deployment of hardware and software
• Acceptance Testing and Documentation

Job Requirements:

• Good understanding in Cyber Threat Intelligence Workflows, STIX and MITRE Framework
• Experience in working with different CTI Platform available in the market
• Knowledge in Linux OS is preferred
• Experience in Virtualization, Containerization and Network.
• Well verse in Python development and CSS styling is a must.
• Experience in ELK Stack, MinIO, GraphQL, RabbitMQ
• Candidate has a passion for cybersecurity domain
• Good troubleshooting and problem solving skill
• Work location: Jurong East

We are seeking a talented and motivated Research Engineer to join our team focused on developing cutting-edge AI models for vision inspection. This role involves leveraging state-of-the-art computer vision and machine learning techniques to solve complex manufacturing inspection challenges.

Responsibilities:

-Design, develop, and optimize AI models for image-based vision inspection tasks.

-Implement and fine-tune state-of-the-art models such as YOLO, Yolact, DeepLabV3, Vision Transformers, and others.

-Develop and maintain Python-based pipelines for data preprocessing, model training, and evaluation.

-Research and implement innovative algorithms to improve model accuracy and efficiency.

-Collaborate with cross-functional teams to understand project requirements and deliver high-quality integrated solutions.

-Document research findings, experimental results, and software implementations.

-Stay updated with the latest advancements in AI and computer vision technologies.

Job Requirements:

-Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.

-At least 3 years of experience

-Strong proficiency in Python programming.

-Expertise in deep learning frameworks like PyTorch (mandatory) and TensorFlow (preferred).

-Hands-on experience with computer vision models, including YOLO, Yolact, DeepLabV3, Vision Transformers, etc.

-Familiarity with image processing techniques and libraries such as OpenCV.

-Strong problem-solving and analytical skills.

-Strong communication and excellent writing skills

-Have a strong work ethic, and able to work on own initiative.

-Team player, communicate efficiently, be flexible and details oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

Job Responsibilities

• Develop and conduct research in development of high-power density vanadium redox flow battery stack by designing flow fields, manifolds, material treatment etc.
• Design, model, simulate, test, and characterize vanadium redox flow battery stacks of various sizes.
• Perform material and electrochemical characterization (both in-situ and ex-situ techniques such as cell cycling, CV, EIS, segmented cell, polarization tests, pH tracing, spectroscopy, XRD, through plane/ in plane resistivity, etc.) to reduce the stack resistivity and improve the capability to operate at high current density.
• Project management including project planning, progress tracking, manage resources, and work together with interns, research staffs and international collaborators.
• Develop IPs and Publish in high quality journals.

The work requires an in-depth understanding of electrochemistry of flow batteries, simulation/modelling skills, material fabrication, material characterization tools, and engineering integration of various components of vanadium redox flow battery stacks. The candidate should be able to work on dynamic, product-oriented group and manage the multiple tasks independently. Passion for research and multitasking abilities makes you the head of research group at VFlowTech with additional benefits.

Job Requirements

• Bachelor, Master’s Degree or PhD in Power Electronics, Renewable Energy, or relevant faculty.
• Knowledge about solar/photovoltaic (PV), wind, or fuel cell power generation systems.
• Knowledge of microgrid systems and their interactions with distribution systems.
• Experience in hardware-in-loop modeling and simulations.
• Knowledge of different microgrid control architectures, different control modes of inverter-based resources, droop controls, consensus algorithms and their applications on microgrid load power sharing and voltage regulation.
• Experience in analyzing and modeling the dyanamics of a diversity of distributed energy and emerging grid resources (solar, wind turbine, small hydros, microturbines, energy storage, electric vehicle charging, power flow controller, etc.)
• Ability to provide engineering specifications and electrical drawings, to conduct field testing and troubleshooting.
• Extensive knowledge of industry standards, and government regulations.

Desired Skills and Experiences

Power Generation, Cell, Troubleshooting, Written English, Modeling, Electrical, Estimates, Structural Engineering, Simulations, Renewable Energy, API, FEED, Soil, Manufacturing, Electronics, Design Management

Your benefits

· Receive support in your own self-development (regular feedback and coaching sessions, access to personal development material, workshops, start-up presentations, and networking events)

· Make key decisions that impact the future of the company

· Enjoy regular team lunches and social events

· A secured employment in a constantly growing company and a future-proof industry with a multitude of personal development opportunities

· Work in an environmentally conscious company - we see climate action as a responsibility

· Competitive remuneration package

· Dental and Medical Benefits

Our company culture

Our team is diverse, international and shares the drive to make a difference and create change.

· We encourage our team to bring in their ideas and take initiatives that make them proud of

· We foster a rapidly scaling working environment with a very entrepreneurial, innovative and collaborative culture

CYSREN was established to address these concerns through multi-disciplinary research and development around cybersecurity, leveraging NTU’s core competencies in Engineering, Exact Sciences, International Studies and Business, among others.

We have a dedicated core team that uses its domain expertise and global experience while leveraging on NTU’s vibrant research culture and comprehensive R&D infrastructure to deliver state-of-the-art R&D projects. We engage with local as well as global agencies and industry partners to develop capabilities for a number of areas of strategic importance including:

• cyber worthiness of autonomous vehicles
• cyber risk management, advanced threat intelligence
• secure-by-design for IoT and policy
• governance of cybersecurity

For more details, please view https://www.ntu.edu.sg/cysren.

We are looking for a Research Engineer to contribute to advancing research in software security and source code auditing. The role will focus on developing and applying Large Language Models (LLMs) to detect logic bugs and vulnerabilities in software systems, ensuring the reliability and security of critical software systems.

Key Responsibilities:

• Conducting research on the development of an LLM-based code auditing agent to identify vulnerabilities and improve code quality in software systems.
• Developing tools to identify and analyze the business logic of software applications, ensuring alignment with functional requirements.
• Building and maintaining a comprehensive vulnerability database for software systems, cataloging known issues and patterns for further analysis.
• Writing high quality paper based on results.

Job Requirements:

• Bachelor's degree in computer science, cyber security or related field.
• Familiarity with common software vulnerabilities, static program analysis and large language models.
• Good written and oral communication skills.
• Proficiency in at least one programming languages for static analysis; building LLM-based agent systems.
• Good publication on static program analysis and LLM for security.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 days, Tuas, Transport provided
• $4000 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Electrical Engineering
• Candidates with minimum 1 year of relevant experience
• Candidates with no experience can apply. On-the-job training is provided
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186