Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with BCA's criteria for build-ability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Manage the site supervisors with respect to C&S engineering works, architectural and M&E engineering works.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Interpret drawings and contract documents on works to be carried
• Any other task assigned from time to time.
• Estimated commencement of work in February 2025.

Requirements:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years’ C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage.
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in additions and alterations of buildings/Commercial Developments.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Job Summary

· Senior/Principal Civil and Structural (C&S) Engineer is an exciting role that offers candidates opportunities in SJ Global Energy’s business unit covering C&S design work for various projects such as CCGT power plants, renewable, clean energy projects and typical land infrastructure for terminaling projects.

Responsibilities:

· Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for civil & structural (C&S) works in industrial/energy related projects. The C&S design will cover foundation, substructure for storage tanks, pipe racks/sleepers/bridge, equipment plinths/foundation, underground pipeline culvert, drainage, sewerage, road infrastructures, superstructures for low-rise buildings/structures, etc.

· Experience in power plant projects would be an added advantage

· Prepare C&S material take-off (MTO) for cost estimates

· Prepare C&S tender specifications, and project requirements, carry out the tender evaluation, etc. for C&S works

· Conduct presentation for concept, FEED and detailed designs to clients and stakeholders

· Project management

· Carry out authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals

Requirements:

· Preferably, honour degree in C&S Engineering from a recognised university and with at least 5 years of detailed design experience in civil & structural engineering projects.

· Conversant in geotechnical engineering design

· Experience in marine facilities’ design would be an added advantage.

· At least 5 years of relevant working experience in the design of concrete and steel structures, drainage, sewerage and road works infrastructures

· Candidate with more than 15 years of relevant experience will be considered for a higher position

· Conversant in Eurocodes, BS Codes, NFPA, API

· Conversant with local authorities’ requirements and submission

· Able to perform a feasibility study, conceptual, FEED and detailed design using commercial software, excel spreadsheet, etc.

· Able to project manage assigned projects independently and possess strong presentation, communication and report writing skills

· Good spoken and written English

· Fluency in spoken and written Chinese would be an advantage

· Able to travel for overseas projects at short notice

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Your duties shall cover but not restricted to the following:

• Provide technical expertise to support end-to-end project management, from tender estimation, project scoping, sub-contractor selection, drawing submissions, on-site project execution, to testing & commissioning and project handover
• Coordinate the procurement and delivery of materials and subcontractor services as per project plan
• Supervise and ensure ongoing works on-site are on track according to project schedule
• Prepare M&E Combined Service Drawings (CSD) to facilitate effective site coordination with all project stakeholders
• Prepare Power Interruption Plan (PIP) or ACMV system migration plans for project involving live systems, including effective communication of work procedure to all project stakeholders
• Preparing project progress reports for director, consultants and clients
• Attend site surveys, coordination meetings with consultants, sub-contractors and any relevant authorities
• Prepare payment claims and variation orders for project contracts
• Provide emergency response for fault tracing and troubleshooting as and when required at client sites
• Ensure adherence to and enforce Bizsafe work safety methods, RA, MOS, procedures and policies regarding all site activities

Requirements

• Hardworking and positive attitude, strong sense of responsibility, willingness to learn
• Degree in Mechanical Engineering or Diploma with work experience
• Good written and spoken English
• Candidates with prior working experience in the construction industry will have a strong advantage
• Ability to multitask is important, as engineer will be expected to handle multiple projects simultaneously
• Proficient in Microsoft Office, Basic knowledge in Microsoft Project and CAD will be useful
• Strong knowledge in ACMV system design and installation including key equipment such as chillers, CWP, CHWP, CT, valves, AHU, in-row cooling units
• Basic understanding of Electrical, BMS and Fire Protection services
• Good knowledge of relevant industry codes of practice and standards and site installation procedures, with familiarity in M&E work methods and sequence

Interested candidates should send an email to [email protected] with full resume, contact details, last drawn & expected salary. Only shortlisted candidates will be contacted.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

PRIMARY FUNCTION:

• Supervise and inspect the installation, modification, testing and operation of instrumentation, controls, components, and systems.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Organize/coordinate site calibration program in accordance with policies and procedures.
• Oversee the use and maintenance of measuring instruments.
• Support in the planning of routine maintenance of production equipment.
• Strategize on maintenance, work instruction and methods to create effective preventive maintenance procedures.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs.
• Train and mentor technicians in equipment operating concepts and maintenance techniques.
• Support plant EHS and Quality initiatives and targets.
• Support automation activities including line sustaining operations and troubleshooting.

MAJOR RESPONSIBILITIES:

• Review/approve calibration specifications against product/ process specifications.
• Ensure timely completion of calibration related investigations and develop effective corrective/preventive actions.
• Develop standard operating procedures for instrument calibration and implementing of maintenance programs for operational efficiencies and minimize cost.
• Evaluate root case analysis reports of major equipment and system failure and develop potential solutions.
• Review installations and assembly documentations periodically to ensure compliance with organizational procedures.
• Approve recommended repair works for major equipment and system failures.
• Establish technical guidelines for the calibrations and alignment of robot motors, sensors and encoders.
• Optimize the motion, functions and routes of robots and other equipment and system components.
• Manage vendor service contracts.
• Preparing operation and maintenance budget.
• Any other duties as assigned by supervisor.

REQUIREMENTS:

• Bachelor of Science in Control & Instrumentation/ Electrical/ Chemical/ IT Engineering or related discipline.
• Diploma with at least 5 years of experience are also welcomed.
• 5 years of relevant experience in a pharmaceutical or nutritional manufacturing facility will be highly advantageous.
• Good planning and supervisory skills.
• Strong interpersonal and communication skills.
• Programmable logic controllers (PLC) will be advantageous.
• High in computer literacy.
• Proficiency in trouble shooting and problem solving.
• Ability to lead, motivate and foster professional development within a team.

*Kindly note this position is based in Tuas.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Education Requirements:

• Bachelor's degree or above in Automation, Control Engineering, Internet of Things (IoT), or related fields.
• Experience in the steel structure industry or similar manufacturing sectors is preferred.

Job Description:

• Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.
• Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.
• Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.
• Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.
• Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

• Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.
• Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).
• Familiar with C# programming.
• Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.
• Understanding of industrial automation technologies, including PLC programming, servo control, and industrial robotics.
• Understanding of smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.
We are a growing engineering consulting company based in Singapore, seeking for a fresh graduate to join us as an Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Perform initial engineering task on the Mechanical services detailed design (including calculations, computer simulations, etc.) for building projects under the supervision of senior engineers.
• Prepare submission to authorities for approval of design
• Attend to project meeting with Client, PM and Consultants from other disciplines
• Attend site project meeting and site inspection, and respond to technical queries
• Liaise with authorities on plans submission and compliance

PRE-REQUISITES

• Degree in Mechanical Engineering discipline
• Able to work independently and exercise initiatives
• Excellent in both written and verbal communication skills
• A team player; Able to interact and work with colleagues and member of other consultants at various level
• Schedule driven and self-motivated

Job Highlights

• Career Development & Opportunities
• Medical Allowance
• AWS, Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s)for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Responsibilities

- Manage and analyze yield for new product off-loads and qualifications.

- Collaborate with customers on product correlation, qualification runs, design and optimization of test process and test program improvements.

- Develop and maintain test programs / hardware for Wafer Sort and Final Test.

- Prepare engineering reports and conduct technical reviews with customers.

- Develop and transfer test solutions for Wafer Sort and Final Test to production.

- Provide engineering support to Test Operations in productivity improvement

- Participate in manufacturing activities to enhance test processes and flow specifications, minimizing downtime and optimizing productivity.

Requirements

- Degree in Electronics Engineering or a related technical field.

- Minimum 2 years working experience in similar capacity preferred, fresh graduates are also welcome to apply.

- Knowledge of programming languages is an advantage.

- Experience in product testing and software / hardware debugging is beneficial.

- Possess project management, analytical, and problem-solving skills.

- Positive attitude with excellent communication and interpersonal skills.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred