Technical Superintendent

Salary: $7,000 to $10,000
Location: Alexandra Point / Fujairah Branch Office (Rotation travel)
Working hours: 5 days, 9.30am to 5.30pm

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities and Duties

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

Qualifications and Requirements

• Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

• Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Roles & Responsibilities

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil and structural works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Job Requirement:

· The RTO shall be accredited by the Institute of Engineers Singapore (IES) and/or Association of Consulting Engineers Singapore (ACES).

• Candidate must possess at least Bachelor's Degree/ Post Graduate Diploma or equivalent.
• The RTO shall have minimum of Five (5) years engineering experience
• Required Skill(s): Organizing, Planning and Prioritizing Work, Time Management, Communication, Go-getter mindset

Kindly submit the updated CV along with copy of RTO Certificate, BCSS

ARC Tier 1 is required to work in a secure ARC environment. ARC is a type of call center that specializes

in providing technical support or customer service for complex products or services. An ARC typically

employs highly trained and specialized agents who are knowledgeable about the product or service being

supported. They may also use advanced technologies such as artificial intelligence, chatbots, and

automation to assist with customer inquiries and support.

In addition to providing technical support, an ARC may also be responsible for proactive monitoring and

management of the product or service being supported, identifying, and resolving issues before they

become problems for customers. This can help to improve overall customer satisfaction and reduce

downtime for critical systems or services.

Overall, an Advanced Response Center plays a critical role in ensuring that customers receive high-quality

technical support and service for complex products and services.

ARC Tier 1 is responsible for provide first level technical support to customers. ARC Tier 1 will work

closely with ARC Tier 2, Team Leads & Technical Support Engineers to achieve this purpose. ARC Tier

1 is the first line of technical support. This team is responsible for basic customer

issues/enquiries/request/alert. It is the same as 1st Level support which provide basic technical or non-

technical support functions.

ACR Tier 1 functions and responsibilities (not limited)

 Respond to the incoming enquiries/incident/request/alerts (Call, Email, Webchat, EUP, IVR

handling, Monitoring consoles)

o 1st level troubleshooting of in supported systems

i.e. Workplace; Server; Network; Microsoft 365; Secure Access Service Edge; Point of Sale

o Security event monitoring

o Server and network availability and performance monitoring

o Password reset and unlock

o Perform log & route [to higher tier or Resolver Team(s)]

 Record and manage all transactions/ cases in Service Management System

 Broadcast notifications to the relevant parties

 Provide timely status update, follow up on cases escalated until closure within the service level

agreement.

Ensure daily tasks are executed according to the Standard Operation Procedure

Responsibilities

• Drive and lead analysis & design, solution validation, workshops under assigned domain to ensure consistent and complete requirement and solution coverage.
• Capture the voice of customers in order to scope the changes: Strong analytical and domain management skills required, including a thorough understanding of how to interpret customer business needs and translate them into application and operational requirements. Think outside the box, always consider business needs, and be prepared to challenge the stakeholders. Any solution must be cost-optimum.
• Manage functional & technical designs for new features or adaption.
• Define and bridge the gap between the requirement, solution, development and testing, work with developers regarding the delivery: scope, resources, planning.
• Formalize the business requirements (functional & technical specification): document analysis, requirements workshops, surveys, business process descriptions (As-Is and Target workflows), use cases, scenarios.
• Mediate business and technical discussions and in case no agreement can be reached, take the decision by considering technical and economic feasibility, business strategies, architectural guidelines and other constraints.
• Report on the progresses, risks and issues. Escalate to the project manager / delivery manager on a timely manner.
• Act as subject matter expert at specific areas and able to go deep into requirement / solution gaps with support from product architects.
• Acting as the contact person concerning functional questions as well as supporting consulting projects and workshops with customers.

Requirements

• Bachelor’s Degree in Computer Science/Information Technology/Programming & Systems Analysis/Science (Computer Studies).
• 7-9 years of experience in the Financial Technology (Wealth Management, Core Banking), Avaloq preferred.
• Good Knowledge of Financial and Global Market Regulations.
• Strong analytical and product management skills required, including a thorough understanding of how to interpret customer business needs and translate them into application and operational requirements.
• Knowledge of Trading, Middle Office, and BackOffice platforms such as Bloomberg, Avaloq, FinIQ, will be beneficial.
• Good stakeholder management skills.
• Excellent interpersonal skills: good negotiation and conflicts management skills, able to build momentum / define consensus.
• Structured, organized and results oriented approach, demonstrating a high level of diligence and attention to detail and the ability to ensure high quality and consistency in the deliverables produced.
• Proficient in Testing Concepts and Test Automation Experience is good to have
• Ability to multitask, be flexible and allocate time according to moving priorities.

Good to have

• Client Management knowledge: Static data knowledge, Client Modelling, Client onboarding process, CRM module; OR
• Portfolio Management knowledge: Portfolio Desk, Performance Desk, Investment Policy Statement, Asset Allocation, Benchmark, Model Portfolio, Investment Proposition etc.; OR
• Transactional Modules knowledge:

- Cash Related Transactions (FX, Money Market, OTCs, Payment, Money Transfer etc).

- Investment Related Transactions (Asset Management, Time Series management, Stock Exchange, Settlement, Corporate Actions, Reconciliation etc).

- Credit/Finance (Facility/Financing, Limit, Loan, Guarantee, Other security Financing).-

- Cost & fees

- Compliance rules and setup

- Regulatory OR

• Migration Knowledge: ETL (extract transform load), Static and Dynamic Data Migration, Migration Workflows and Activities, Migration Strategies and Planning, Data Mapping; OR
• Project Management: both waterfall and Agile methodology.

Roles & Responsibilities

• Carry out in-house & on-site calibration on temperature instrument / equipment
• Provide technical support for customers (internal & external)
• Liaise with customers (internal & external) for schedule / arrangement
• Maintain Test and Measurement Equipment / upkeep Quality Documentation
• Participate in Safety / Quality activities
• Carry out other duties as assigned by IC or engineer

Requirements

• NTC3 / ITE / diploma in Electronics / Electrical / Mechatronics
• 1 to 2 years working experiences in related field
• Knowledge in accredited laboratory / ISO17025
• Freshers are welcome, training will be provided.
• Class 3 driving licence preferred

Healthcare/Commercial Project

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in January 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in Preferably with experience in Hospital/Healthcare/Institution/Commercial developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Carry out full time supervision for construction of structural works in accordance to BCA approved structural drawings in compliance to Building and Control Act and regulations
• Check that requirements of specifications in regards to materials and workmanship are complied with the project specifications by the Builders. Ensure high quality control for all civil and structural as well as architectural works to be carried . This includes sample tests for materials and workmanship etc
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect / Engineers for issuance of Architect’s Instruction or Architects' clarification
• Work under the direction of RE, PE and Architect for site organisation, allocation of duties and tasks and coordinate with Architect for M&E services and structural design that affects architectural and ID works.
• Participate in Client/Consultant's site meeting and technical meeting if required by RE
• Vet and signoff inspection forms and quality related issues including all dry-lays, trade demonstrations, method of statements, mock-ups, defects inspection and rectification follow-up to sign-off, M&E testing and commissioning, handover to client.
• Check architectural and ID works and intent of design details are followed. To notify Architect of any design intent conflicts and quality variations, illegal works.

What you will need:

• Registered with IES-ACES Joint accreditation Committee ( JAC ) as Resident Technical Officer with a minimum diploma in Civil Engineering or equivalent qualification
• At least 5 years or more relevant experience
• Experience in precast RC piling works and structural steel buildings are preferred
• Comfortable for Project Site at Tuas South

Technician (Assembly/AutoCAD/Technical Drawing)

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Diploma in Mechanical, Mechatronics Engineering or its equivalent
• Able to comprehend schematic/Technical drawing
• Experience in Orbital Welding and/or gas tungsten arc welding (GTAW), is an advantage.
• Able to commit rotating shifts

Interested applicants please submit your resume to [email protected]

Job Description

• Industry/ Organization Type: IT/ Cybersecurity
• Position Title: Technical Support Officer (SSL)
• Working Location: Tai Seng
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + AWS + 1 to 3 months VB
• Duration: Permanent

Key Responsibilities

• Interact with customers, resellers, and partners to identify and resolve technical issues.
• Provide first-level technical support for Secure Socket Layer (SSL) certificates via phone and email.
• Coordinate and escalate complex technical issues to the team and/or partners when necessary.
• Document issues encountered and their resolutions for tracking purposes and future reference.
• Conduct basic SSL technical support training for the Sales Support Team.
• Perform any other ad-hoc duties as required.

APPLY NOW!!!

• Minimum NITEC in IT/ Computer Science or its related discipline, with at least 1 year of relevant work experience.
• Strong SSL product and technical background is required.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71349 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Any interested candicate please forward your resume to [email protected].

Bloomberg ignites the power of information and technology to bring clarity to a sophisticated world. A global financial information and news leader that provides influential decision makers a critical edge by connecting them to a dynamic network of information, people and ideas. The company delivers data, news and analytics through innovative technology and provides real time financial information to more than 325,000 subscribers globally.

What’s the role?

Bloomberg Technical Support is responsible for deploying and supporting Bloomberg’s variety of products and services. This high-profile role requires experience across general technical areas pertaining to hardware, software and networking, in addition to experience with coordinating the implementation of technology solutions.

The Technical Support team is seeking a qualified individual to provide leadership and direction to the team in Singapore. You will possess a strong customer focus, passion for leadership and high interest in technology. In addition, you have good attention to detail with excellent coaching and communication skills. You will work closely with a range of stakeholders to deliver access to the Bloomberg infrastructure while meeting our clients’ connectivity needs.

As a confident and well-organized communicator you will also be responsible for handling key accounts, regularly liaising with market data and technology personnel, as well as telecommunication providers, service vendors, and partner with a variety of internal stakeholders to ensure the highest quality of service to our customers.

You will work towards developing a collaborative team environment that fosters creativity and places a high value on providing quality customer service and technical support. Striving for excellence in both team productivity and customer happiness is at the heart of this position. You will be responsible for the hiring, on-boarding, evaluation and continued development of your team members.

We'll trust you to:

• Maintain quality relationships with your team on both a group and individual level
• Ensure that your team's performance is on track to meet departmental goals across multiple metric categories such as productivity and quality
• Provide tailored coaching that improves individual productivity and performance
• Empower your team to innovate and challenge traditional thinking on how to best tackle clients' technical issues
• Establish strong global & interdepartmental relationships and strategies to make valuable contributions to the business
• Build and drive strategies for your team that aligns with the department and business goals in the region
• Be involved in recruiting, hiring, and identifying candidates with potential to be successful at the role

You'll need to have:

• Minimum 3 years of working experience in technical support or a similar role that engages with internal or external clients in a technical capacity
• Minimum 1 year of experience in leadership, mentoring, coaching or training
• Business proficiency and fluency in Mandarin to support Chinese-speaking clients
• Excellent written and verbal communication skill in English
• Demonstrated people management, project management and change management skills
• Extraordinary level of customer service and a good understanding about our business
• Experience managing workflow or projects for our product and its technical area (software, connectivity, data, etc.)
• Strong stakeholder management skill, including networking and communication skills
• Experience working in a global, team-oriented, and collaborative environment
• Ability to quickly prioritize and take appropriate actions in handling escalated cases
• Strong interest in learning Bloomberg products and its technical concept and architecture
• Demonstrated continuous career growth within an organisation
• Bachelor’s degree or degree-equivalent qualifications

We'd love to see:

• Experience and knowledge of our product implementation workflow including the installation, relocation, and removal of new Terminals, routers, and circuits
• Experience and knowledge in troubleshooting client issues related to the Bloomberg software, hardware, SFTP, FIX and API products
• Experience and knowledge of PC hardware, operating systems and software suites
• Knowledge of networks with an understanding of but not limited to IP addressing, sub-netting, routing and Secure File Transfer Protocol

If this sounds like you:

Apply if you think we’re a good match. We’ll get in touch with you to let you know the next steps but in the meantime feel free to browse this: http://www.bloomberg.com/professional

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

ROLES & RESPONSIBILITIES

• To assist in fixing Vending Machines (non-electrical works), such as

1. Removing and fixing Vending Machine’s columns
2. Basic testing of Vending Machine
3. Regularly lift and/or move objects

• Cleaning of cylinders
• To assist logistics supervisor in delivering machine to location
• To upkeep 5S housekeeping at Technical Services
• Ability to do welding.
• Any other duties assigned by Superior

REQUIREMENTS

• No experience required, training will be provided
• 2 months contract until February 2025.

Work Location: Kaki Bukit View

• Central-North location
• 5 days work week
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural/ geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1. Mechanical experiments and design
   • Experiments - e.g. designing variations to the grout extruder to allow less waste and better reliability
   • Design - e.g. most of the upcoming v4 robot is being designed by interns with Jakub supervising them
2. Mechanical manufacturing, assembly and testing (only for R&D, our manufacturing is outsourced)
   • 3D printing - Slicing prints (often for multi-filament printing), managing and repairing printers (we have Tenlog TL-D3, TL-D5, Ender 3, Prusa i3)
   • Outsourcing manufacturing - specifying cabling, machining etc. to manufacturers
   • Machine tools - making some parts by hand when we need to quickly iterate
   • Assembly - putting in inserts, bolting parts together, waterproofing
   • Testing - testing the robot’s grout extrusion and cleaning, making minor adjustments to make sure everything is running properly and robot produces nice grout lines
3. Electrical experiments and design
   • Design - most of our PCBs have been designed by interns, aiming to minimise free wires in the robot, speed up assembly, allow easy modification where needed. Generally connecting all modules, controlling power, providing a physical user interface…
   • Experiments - e.g. sourcing and testing various motor and driver combinations to pick for our drive system
4. Electrical assembly (only for R&D, our manufacturing is outsourced)
   • Outsourcing production of cable assemblies and PCBs
   • Where necessary to make modifications - soldering PCBs, soldering power cables, crimping cables
5. Embedded programming
   • Writing object oriented C++ code
   • Keeping the code clean and maintainable
6. Robotics DevOps & Real World Industry Trials (expect to be on site 1-2 times a week)
   • Understand the whole project and run our ROS2 stack on real HW.
   • Create reproducible testing methodology and evaluate metrics on the HW.
   • Be in charge of the robots on the construction site.
   • Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals

Job Scope:

• Assist users with technical issues related to software applications
• Analyze and troubleshoot software and application-related problems
• Create and maintain support process documentation and knowledge base articles
• Help with the installation, configuration, and updates of applications
• Work with development teams to report bugs and relay user feedback
• Provide training sessions to improve user understanding of software applications
• Track application performance metrics and user satisfaction
• Escalate complex issues to higher-level technical teams as needed
• Regularly communicate with clients to address their needs and provide updates
• Participate in testing new software versions or features prior to release

Requirements:

• Degree in Electronics, Electrical Engineering, Industrial Engineering, or Mechatronics
• Entry-level candidates are welcome; no prior experience required
• Passion for automation with a creative and adaptive mindset
• Strong communication skills to convey technical concepts effectively
• Product training will be provided
• Knowledge of PLC, Control/Automation, and IoT is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Roles & Responsibilities

· Conducting on-site inspections to monitor construction progress and quality of work.

· Ensuring that construction activities adhere to safety regulations and guidelines.

· Reviewing and approving construction drawings, materials, and method statements.

· Coordinating with QPS team, contractors, engineers, and other stakeholders to resolve any technical issues that may arise during the project.

· Keeping detailed records of site activities, including daily reports, progress updates, and quality control measures.

· Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.

· Providing technical support and guidance to the project team to ensure successful project delivery.

· Collaborating with relevant authorities and agencies to obtain necessary approvals and permits for construction activities.

· Participating in site meetings, inspections, and audits to ensure compliance with project requirements.

· Ensuring that all construction works are carried out in accordance with approved plans, specifications, and contractual agreements.

Job Requirements

· Minimum Diploma in Civil Engineering or related field.

· Relevant experience in construction supervision, preferably in civil engineering projects.

· Knowledge of local building codes, regulations, and construction practices.

· Familiarity with construction site safety procedures and regulations.

· Ability to read and interpret engineering drawings and specifications.

· Good communication skills and the ability to work effectively with contractors and other stakeholders.

· Certification as a Resident Technical Officer (RTO) by BCA/IES/ACES.

· Willingness to work on-site, including irregular hours and weekends if required.

· Strong problem-solving skills and attention to detail.

· Candidates with prior HDB BTO or LTA projects experience are encouraged to apply.

The proposed personnel shall have minimum two (2) years of experience in the supervision of works similar in nature to the Works in the Civil Contract.

He/she shall have experience in supervising installation and monitoring of geotechnical instrumentation.

The proposed personnel shall have a diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and shall be accredited by JAC of IES/ACES as QSS.

The QSS shall meet the required minimum hours of work per month (Base Monthly Work Hours) which shall be computed based on the normal working hours for the week (forty-four (44) hours a week).

Work area -West side

We are seeking a detail-oriented and analytical Resident Technical Officer (Mechanical & Electrical) to join our team in Singapore, Singapore. In this role, you will be responsible for overseeing the construction of the mechanical and electrical systems of our project:

• Good co-ordination skills and good technical knowledge of M&E systems/ equipment, including security systems
• To carry out regular site supervision and inspection of the works/materials including any off-site production as instructed by the consultant team so as to ensure that mechanical and electrical works, including security systems, are constructed to required quality, accuracy and workmanship
• To monitor work in progress in accordance to Approved Master Schedules with breakdown to Monthly, Weekly and Daily programmes
• To assist the RE on daily, weekly and monthly reports of site progress as per contractor’s approved program, activities, issues and resolutions
• To check and verify reports, variations and progress claims submitted by contractors, including as built quantity for the variations
• To undertake any other duties related to the project as and when instructed by the SO and RE.

• Central-North location
• 5 days work week
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural/ geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Role:

Technical Manager (Mechanical / ACMV)

• Working Day: 5 Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical (ACMV) services.
• Good knowledge in Mechanical works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for Mechanical (ACMV) services is preferred

Job scope

• Preparation and submission of Mechanical tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on Mechanical QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Technical Superintendent

• Salary: S$ 7,000 to S$ 10,000
• Location: Alexandra Point / Fujairah Branch Office (Rotation travel)
• Working hours: 5 days, 9.30am to 5.30pm

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in February 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in in additions and alterations of buildings/Commercial Developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.