-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

Key tasks:

• Processing of incoming jobs documents.
• Data entry in SAP for incoming jobs.
• Creation and updating of monthly reports as necessary.
• Monthly jobs closing in SAP.
• Filing of completed job record documents. Maintain proper filing system
• Assist in submission of job documents for audits.
• Attend to walk-in and telephone enquiries in a professional manner
• Follow up with customers on service request
• Work closely with the operation team in daily service arrangement.
• Assist Operation in daily activities.

Knowledge/Experience/Others

• Must have experience in SAP, data entry and stock & material management.
• Skilled in Microsoft Excel & manipulation of Excel database.
• Able to create & submit reports using Microsoft Office
• Have good knowledge of SAP usage & data entry.
• Attention to detail, strong communication skill, service minded and can carry out job independently

Roles & Responsibilities

· Conducting on-site inspections to monitor construction progress and quality of work.

· Ensuring that construction activities adhere to safety regulations and guidelines.

· Reviewing and approving construction drawings, materials, and method statements.

· Coordinating with QPS team, contractors, engineers, and other stakeholders to resolve any technical issues that may arise during the project.

· Keeping detailed records of site activities, including daily reports, progress updates, and quality control measures.

· Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.

· Providing technical support and guidance to the project team to ensure successful project delivery.

· Collaborating with relevant authorities and agencies to obtain necessary approvals and permits for construction activities.

· Participating in site meetings, inspections, and audits to ensure compliance with project requirements.

· Ensuring that all construction works are carried out in accordance with approved plans, specifications, and contractual agreements.

Job Requirements

· Minimum Diploma in Civil Engineering or related field.

· Relevant experience in construction supervision, preferably in civil engineering projects.

· Knowledge of local building codes, regulations, and construction practices.

· Familiarity with construction site safety procedures and regulations.

· Ability to read and interpret engineering drawings and specifications.

· Good communication skills and the ability to work effectively with contractors and other stakeholders.

· Certification as a Resident Technical Officer (RTO) by BCA/IES/ACES.

· Willingness to work on-site, including irregular hours and weekends if required.

· Strong problem-solving skills and attention to detail.

· Candidates with prior HDB BTO or LTA projects experience are encouraged to apply.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Carry out full time supervision for construction of structural works in accordance to BCA approved structural drawings in compliance to Building and Control Act and regulations
• Check that requirements of specifications in regards to materials and workmanship are complied with the project specifications by the Builders. Ensure high quality control for all civil and structural as well as architectural works to be carried . This includes sample tests for materials and workmanship etc
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect / Engineers for issuance of Architect’s Instruction or Architects' clarification
• Work under the direction of RE, PE and Architect for site organisation, allocation of duties and tasks and coordinate with Architect for M&E services and structural design that affects architectural and ID works.
• Participate in Client/Consultant's site meeting and technical meeting if required by RE
• Vet and signoff inspection forms and quality related issues including all dry-lays, trade demonstrations, method of statements, mock-ups, defects inspection and rectification follow-up to sign-off, M&E testing and commissioning, handover to client.
• Check architectural and ID works and intent of design details are followed. To notify Architect of any design intent conflicts and quality variations, illegal works.

What you will need:

• Registered with IES-ACES Joint accreditation Committee ( JAC ) as Resident Technical Officer with a minimum diploma in Civil Engineering or equivalent qualification
• At least 5 years or more relevant experience
• Experience in precast RC piling works and structural steel buildings are preferred
• Comfortable for Project Site at Tuas South

JOB SUMMARY

Under general direction, the Technical Sales Manager is responsible for managing the technical sales aspects including segment, product line & technology packages, and all relevant technical supporting activities throughout the entire sales process. Successful activities include: collaborating within the sales organization on new customer opportunities, building strong customer relationships, technology training, collecting & analyzing customer/market insights to identify winning technology solutions, and supporting strategic sales growth initiatives. This is a key role within our organization advising and guiding the technical aspects of the sales process while working within a close collaboration with Global Technical Sales Managers (TSMs) to ensure alignment and leverage global insights and strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Build credible & strong relationships by focusing on:

• Advocating, coaching, and training for the segment, product line, and/or specific technology.
• Supporting sales growth opportunities, and proposal development, in a team selling approach with sales managers and sales support operations.
• Actively supporting sales activities: customer technology needs assessment, alignment with engineering standards, technology decision, product sizing, and strategic account planning.
• Face to face interactions with customers and identified markets we serve.
• Developing multiple relationships & communication pathways within a customer
• organization focused on Engineering and Plant Operations.
• Support conference strategies including technical presentations and booth support.
• Maintaining up-to-date understanding of industry trends and technical developments.
• Identifying opportunities & advise on available technology or service solutions.
• Clearly articulate Crown’s technology offerings and advantages.
• Obtaining and coordinating data and recommendations to Sales and Sales

• Segment and Product Line development:

• Collaborate with Global Segment Commercial Leads, Engineering, & other Technical Sales Product Managers to develop cohesive standard global product offerings.
• Develop & Manage standard product line sales tool-kits including sizing programs, sales flow diagrams, mass balances, and a library of sales presentations.
• Assist marketing collateral development on product lines and new innovations.
• Support technology discussions to close the deal in an efficient and professional manner.
• Deliver against sales goals by supporting Sales, Sales Support, & Aftermarket team members.
• Cross functional & global collaboration. Key technical tag for Aftermarket commercial support connecting inquiries into Sales & Engineering as needed.
• Deep understanding of technology/service value and total cost of ownership, TCO.
• Support new innovation launches with technical support & training.
• Contribute to all customer field reports after each customer visits.

• Develop testing protocols for customer piloting work as required.

• Perform other related duties as required and assigned.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in chemical, or mechanical engineering.

• Master’s degree preferred.

• 5+ years Engineering or Operations experience within the Oilseeds complex, preferably in an Oilseeds Crushing or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleochemical business.

• Demonstrated sales support experience.

• Strong Competitive desire to succeed & win.

• High integrity and ethics.

• Entrepreneurial spirit.

• Excellent written and verbal communication skills.

• Effective at problem solving and conflict resolution.

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Strong attention to detail.

• Technology advocate into customer focus.

• Establish and maintain effective working relationships with co-workers, customers, and vendors.

• Responsive to requests and inquiries from internal and external customers.

• Well-developed presentation skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, TEAMS and PowerPoint, SharePoint.

• Must be able to communicate in English fluently. Ability to communicate in a second language – European or Asian languages preferred but not required.

• Customer relationship management (CRM) experience a plus.

• Process Modeling experience – ChemCad, Aspen modeling a plus.

• Ability to travel internationally and domestically up to 25% of the time.

Position: Technical Project Manager

Salary: ($5.5k - $7.5k) + AWS

Location: Commonwealth

Job requirements:

● Be comfortable to be involved in hands-on design, configuration, installation, performance tuning, and POCs.

Job descriptions:

● Develop project plans, ensure accurate delivery forecasts, pursue new business opportunities

● Strive to achieve a Customer Net Promoter Score of 4.0 or higher

● Lead architecture reviews with project stakeholders

● Assist in bid management activities for sales and solutions teams.

● Contribute to productivity and innovation initiatives and programs

● Cultivate a reputation as a trusted advisor to clients.

● Foster strong relationships with technology vendor partners

● Design and architect Network, Infrastructure and Cloud architecture models with a hybrid emphasis.

● Deploy, configure, and maintain Wintel servers (especially HPE/Dell servers), VMware virtualization platform, Microsoft server products, and related security software.

● Manage and configure Cisco switches, firewall devices, Fortigate, and load balancers.

● Develop and maintain scripts and automation tools to optimize IT infrastructure

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
• Posse valid Class 3 driving licence is a MUST

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Contract Period: From April 2025 for 24 months

Working hours:

Total 44 hours/week

· Mondays to Fridays: 8.30 am to 5.30pm

· Saturdays: 8.30 am to 12.30pm

· Lunch break 1 hour (Mon to Fri), time to be 12.30pm to 1.30pm.

The RTO may be required to work beyond regular working hours including after office hours on Saturday, Sunday and Public Holiday whenever the need arises, and services rendered shall be based on the actual number of man-hours spent on site.

Scope of works:

· Communicate effectively with PUB officers, resident engineer, contractors, and other stakeholders to ensure that project specifications are met.

· Maintain and document accurate records (hardcopy and softcopy) of daily activities, site conditions, and any issues encountered, ensuring these are communicated promptly to project managers and engineers.

· Daily oversight of demolition and reinstatement activities, ensuring they are carried out according to engineering designs and safety standards.

· Ensure that all construction materials and workmanship meet the required standards.

· Implement and monitor safety protocols to protect workers and the public from the dangers inherent in demolition work.

· Working closely with contractors to ensure that the project stays on schedule and within budget, and that all work is performed according to the contract specifications.

· Ensuring that demolition and construction activities comply with environmental regulations, including dust control, noise abatement, and waste disposal.

· Arrange and supervise acceptance tests on the site as may be necessary, including the approval of samples submitted, inspection and testing during manufacture of such materials, equipment and plants as are usually inspected and tested locally before commissioning.

· Assist in supervision and maintain quality control as specified in the Contract signed between the Board and the Contractor who have been awarded the project: “Demolition and Land Reinstatement Works at Bedok NEWater Factory.”

· Monitor and report on the progress of the work as per approved by the Board.

· Record and ensure that all works are carried out in accordance with the contract specifications and report any non-compliance to the Board.

· Obtain all quotation documents needed for any Variation Order (VO) Work which might arise during the course of the project.

· Check on the quality of materials delivered to site and report to the Board any material that does not conform to the specifications.

· Check and certify the monthly progress claim submitted. Assist the Board to verify all variation works carried out on site. Record and report all additional work and any claim on extension of time.

· Inspect all completed works and compile a list of rectification works.

· Monitor the progress of rectification work and ensure all rectification works are satisfactorily completed.

· Ensure the safety, cleanliness, tidiness and Earth Control Measure (ECM) are provided and maintained on site.

· The RTOs shall review the Risk Assessments & Methods Statements and verify Permit-to-work (PTW) and Notification-to-Work (NTW) submitted, before the commencement of any work.

· Ensure that all temporary works are constructed according to the Professional Engineer’s or approved drawings.

· Ensure all demolition, reinstatement, grouting, excavation, pipe welding, pipe laying, backfilling, etc. are checked certified and supervised.

· Facilitate the consultation and co-ordination with all authorities and agencies in order to obtain approval on time.

· Assist the Board on the finalisation of all accounts upon partial completion and/or completion of work.

· All other duties as and when required by the Board.

Qualification, skill, experience:

· Minimum Diploma in Civil or Geotechnical Engineering from a recognized institution or equivalent is necessary.

· About 3 years of experience in site supervision, particularly in Civil or geotechnical projects with experience in demolition, construction, or similar industrial projects.

· Practical experience in projects that involve construction, demolition, structural integrity assessments, and reinstatement of structures is crucial.

· Hands-on experience in ensuring that safety protocols are rigorously followed on-site.

· Should have valid certificate from The Association of Consulting Engineers Singapore (ACES) or The Institution of Engineers Singapore (IES).

· Should be equipped with Building Construction Supervisor Safety Certification or equivalent as well as certification on both work at height and confined space entry.

· Proficiency in reading and interpreting Civil engineering drawings, and familiarity with construction materials, techniques, and regulations. Understanding of soil mechanics,
ground behaviour, and foundation engineering, particularly in the context of demolition and reconstruction.

· Familiarity with tools and equipment used for site inspections, such as levelling instruments, soil testing equipment, and structural assessment tools.

1. Familiar with ocean-going shipboard machineries and equipment

2. Familiar with International Safety Management System

3. Capable of solving shipbaord technical issues

4. Able to implement and excercise quality control

5. Experineced in ship technical management

6. Good understanding of internation conventions , rules , regulations of marine industry

• Working Location: 7 Jurong Pier Road, Singapore ( 619159 ) - Boon Lay
• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:15pm
• Salary range: SGD 4,000 to SGD 5,500 monthly, 13th month, SGD 250 transport allowance

Collaborate with Business Unit to strive for anticipated sales growth targets as well as to breach new markets to ensure captive market share year on year. Develop effective strategies and plans to increase spare parts market share and revenue.

SPECIFIC RESPONSIBILITIES

• Proactively handles all opportunities from leads to ensure timely fulfilment and profitability of business unit
• Conducts and provides accurate forecast and sales pipeline plans to management for planning
• Actively promotes Service Sales (Aftermarket products) to distributors in conjunction with spare parts sales
• Collaborates with the sales team to develop sales strategies to target new opportunities recognized within existing accounts
• Collaborates with the sales team to develop sales strategies to target new opportunities recognized within existing accounts
• Have in-depth knowledge on wide range of diesel industrial engines (small to large capacity) to provide support to distributors in terms of spare parts technical advice
• Optimizes inventory level (own stock and consignment stock at customer site) to achieve low stock-up cost and satisfactory parts availability to customers
• Maintains accurate records of all projects, pricings, sales, and activity reports
• Creates and conducts proposal presentations for sales representatives, customers, and prospects
• Leads and participates in continuous improvement projects in cross-functional areas
• Performs any other parts sales and aftermarket duties as and when assigned

Qualifications / Requirements

• Diploma/degree in Mechanical or Electrical Engineering with at least 3 years of relevant experience, preferably in spare parts or automotive industry
• This position requires fair amount of traveling in the Asia Pacific and South East Asia Region (10-15%)
• Prior spare parts experience with engines manufacturers will be advantageous.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

The Products Pillar of AI Singapore is looking for an experienced Senior AI Engineer with expertise in technical documentation, community engagement, and experience in establishing robust data engineering processes in large organizations.

Duties & Responsibilities

• Develop comprehensive technical documentation for AI projects, including design specifications, implementation guides, user manuals, and API documentation.
• Collaborate with cross-functional teams to gather technical requirements and translate them into clear and concise documentation.
• Establish and maintain documentation standards, templates, and tools to streamline the documentation process and ensure consistency.
• Lead community engagement initiatives, including participating in forums, webinars, and conferences to share insights, best practices, and lessons learned.
• Cultivate relationships with internal and external stakeholders to promote collaboration and knowledge sharing within the AI community.
• Drive the establishment of data engineering processes and best practices to ensure the reliability, scalability, and efficiency of AI solutions in large organizations.
• Stay abreast of the latest developments in AI, data engineering, and related fields to continuously improve processes and drive innovation.

Qualifications

• 7+ years of industry experience in the field of data science, machine learning and AI
• BS in Computer Science or related field (or equivalent industry experience)
• Experience in technical documentation, including writing and maintaining documentation for complex software systems or AI projects.
• Strong communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams and engage with diverse communities.
• Solid community engagement portfolios, such as impactful open-source initiative leadership and regular involvement in tech community-driven events
• 5+ years involvement in end-to-end prototyping, deployment and operationalisation of machine learning products in private/public sectors
• Technical leadership experience is highly favoured

Process Technician /Assistant Process Engineer
Working location: Ang Mo Kio Ind Pk 2, Sing Ind Complex, Singapore (569510)
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

WhatsApp: https://wa.me/6596112291 (Kyra)

Voon Yih Boon Reg No: R2210672 | The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job Description

• To assist the Architectural Associate/ Architect in his/her duties
• Preparing planning applications and other regulatory application procedures;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Assisting in the detailed design process and co-ordinating design information;
• Preparing/updating tender documentation and construction drawings;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Attending site visits and recording minutes/discussions
• Assisting project architect in coordinating site issues
• Producing and analysing detailed specifications for suitable materials or processes to be used in construction;

Job Requirements

• Relevant Degree in Architecture
• At least 2 years of relevant working experience
• Proficient in Vray renderer, 3D max, Adobe Photoshop and Sketch-up
• Must have Knowledge with 3D Autocad, Revit & BIM
• Relish working in a challenging and fast-paced environment
• Possess a flair for creativity and a keen eye for detail
• A proactive and conscientious team player
• Advantageous to have design experience in commercial, mixed-use and residential projects

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, method of statement and work procedure to project manager.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.

Job Requirements:

• Degree in Engineering is required/preferred
• minimum 3 years of Project Management knowledge, skills, experience.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment

Maintain the existing PLC and SCADA system, and build the new system, and trouble shooting for the control system and control panel, and prepare the electrical single line drawing using AutoCAD, and coordinate with customer to understand customer's requirement. We will provide on site training, and hope the candidate willing to learn.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Aon is in the business of better decisions

At Aon, we shape decisions for the better to protect and enrich the lives of people around the world.

As an organization, we are united through trust as one inclusive, diverse team, and we are passionate about helping our colleagues and clients succeed.

What the day will look like

The Senior Application Developer is principally responsible for the development and delivery of Reinsurance Analytics applications to the user base. Responsible for crafting architecturally sound solutions, delivering detailed technical design, development planning and implementation of new features for globally used applications specifically focused on the client facing activities of Aon's Reinsurance Analytics Solutions business. These activities involved include, but not limited to, spatial development, UI/UX implementation, and other analytical solutions. The person in this role will support the modernization and Cloud migration initiative for applications in the Analytics Solution service area.

• Be an active participant during the "ground-floor" phase of projects to provide appropriate application architecture and assist in making technology choices that ensure project success.
• Play a hands-on role with development teams when applying coding practices to the architectural design ensuring success in delivering a quality product to users.
• Work alongside the Development Team Leads during the development process to ensure project design is being followed, assist in solving issues facing the team.
• Work alongside the Development Team to Manage and own the architectural design of new applications as well as new features within existing applications.
• Conduct discovery and lead software solution development using Azure Cloud.
• Take mentorship from the Reinsurance Architecture Community of Practice regarding the principles set forth around coding principles and other architectural practices to be applied to the Reinsurance business' suite of applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Coordinate with project managers to ensure timely delivery of projects and adherence to project timelines.
• Ensure the performance, quality, and responsiveness of applications. Identify and correct bottlenecks and fix bugs.
• Maintain code quality, automation and implement best practices.

How this opportunity is different

As part of an industry-leading team you will help empower results for our clients by delivering innovative and effective solutions as part of Analytics Product Innovation and Development Team within Aon's Reinsurance Solutions business, in Bloomington, MN. As a member of the team, you will work with the Analytics Development Team and Operations Application Delivery Lead.

Skills and experience that will lead to success

• 10+ years of IT application development and implementation experience
• 7+ years of C# development experience
• Other languages a plus (C#, Python, .Net)
• 5+ years of application design and software architecture
• 2+ years of Azure Cloud experience. Efficient knowledge on Azure and its services.
• 5+ years of Object-Oriented Programming (OOP) experience
• 5+ years' experience with Microsoft SQL Server databases
• Experience architecting Azure Cloud solutions and/or application migration to Azure.
• Experience with DevOps practices and tools such as Azure DevOps, CI/CD pipelines, and automated testing
• Proficiency in database design and management, including experience with SQL and NoSQL databases.
• Experience with performance tuning and optimization of applications.
• Knowledge of security best practices and experience implementing security measures in software development
• Strong understanding of software development lifecycle (SDLC) and Agile methodologies.

How we support our colleagues

In addition to our comprehensive benefits package, we encourage a diverse workforce. Plus, our agile, inclusive environment allows you to manage your wellbeing and work/life balance, ensuring you can be your best self at Aon. Furthermore, all colleagues enjoy two “Global Wellbeing Days” each year, encouraging you to take time to focus on yourself. We offer a variety of working style solutions, but we also recognise that flexibility goes beyond just the place of work... and we are all for it. We call this Smart Working!

Our continuous learning culture inspires and equips you to learn, share and grow, helping you achieve your fullest potential. As a result, at Aon, you are more connected, more relevant, and more valued.

Aon values an innovative, diverse workplace where all colleagues feel empowered to be their authentic selves. Aon is proud to be an equal opportunity workplace.

Aon provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran, marital, domestic partner status, or other legally protected status.

We welcome applications from all and provide individuals with disabilities with reasonable adjustments to participate in the job application, interview process and to perform essential job functions once onboard. If you would like to learn more about the reasonable accommodations we provide, email [email protected]