JOB DESCRIPTION:

- To support the Senior Technical Manager to manage the technical operations of a fleet of tankers.

- Overseeing the daily operations of maintenance and repair, survey schedules and docking.

- Manage financial budgets and cost control for maintenance, repairs, stores, modifications, and dry docking while ensuring compliance with industry, Class, International and statutory regulations of ISM/ISPS/MLC.

- Update record of class status and liaise closely with Classification Societies / Suppliers / Contractors on day to day operations.

- Manage all technical matters and ensure that safety is being given the highest priority.

- Monitor, coordinate and attend to vessel for oil major inspections, TMSA, statutory surveys, related matters and follow-up.

- Incident / Accident Investigation and Reporting.

- Maintain close communication with the vessel management team, and lead, develop and coach assigned senior officers on all matters (safety, technical, cost, leadership).

- Conduct appraisal of crew member, brief crew on organisational policies, documentation, and procedures.

REQUIREMENTS

- Possess sea-going work experience as Marine Engineer on tankers

- Possess MOT Engineer Certification either class 1 or class 2 will be an added advantage.

- Has at least 3 years of experience and proven technical ability as technical superintendent or similar position.

- Planned maintenance system experience

- Has good organizational skills with hands-on approach in technical trouble shooting and problem solving.

- Has good interpersonal and communication skills, both verbal and written

- Independent and resourceful. Able to work under pressure to meet deadline.

- Ability to travel within short notice as required.

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Operate, maintain, and repair cooling systems, including chillers and related components.
• Carry out preventive maintenance for client's properties and attend to all work orders issued by management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to installations
• Effective communication skills to work collaboratively within a team and communicate with clients and management.
• Preferably with Class 3 Driving licence

Job Description & Requirements

• Be part of the fast-expanding team and provide comprehensive design and project management services to our clients in the fields of Infrastructure constructions.
• Carry out design activities that are cost-effective and comply with clients’ specifications and statutory regulations.
• Project management and contract administration for engineering contracts.
• Responsible for financial management of the project, ensuring key deadlines are met and that the project stays on schedule and staff are working together effectively.
• Oversee project development to implementation.
• Play a key role in client management and client satisfaction.

Requirements:

• Bachelor Degree in Civil / Structural, Mechanical/Electrical or any Engineering related disciplines
• Minimum 19 years hands-on design experience in building and/or infrastructure projects
• Strong project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Good leadership and communication skills
• Registered Professional Engineer with Singapore Professional Engineers Board is preferred

Quality Assurance Department (QAD)

Job Responsibilities:

• Liaise with Maintenance team to schedule lift inspections.
• Conduct lift inspection in accordance with applicable code requirements
• Prepare inspection reports.
• Verify correction of defects.
• Perform any other duties as assigned from time to time by the Company’s authorized personnel.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift Inspection, Testing & Commissioning or Maintenance preferred.
• Good communication skills.
• Only Singaporean need to apply

• Ensuring Safety of the vessel and her crew always as a top priority.
• Manage technical requirements and operation of Offshore vessels such as DP2, DP3 Subsea Dive Support (DSV), PSV, AHTS, and other assets.
• Monitoring technical costs of managed vessels and ensuring follow-up of cost control with vessels Master and Chief Engineer.
• Monitoring of vessel visitations to ensure that vessels are inspected regularly.
• Ensuring that internal and external audit observations are agreed to and closed out within the agreed schedule.
• Developing programmes for continuous improvement and to ensure that Technical Management staff and the Vessel Engineers are kept aware of new or changing regulations and industry initiatives.
• Project Management, Plan, manage, monitor, and execute vessels repairs, dry docking, and conversions within agreed budgets.
• PIC for any client’s surveys, inspections including OVID, MWS, and coordinate with relevant departments to close out the findings in the punch list before mobilization.
• Responsible for preparing project execution plan, planning and schedules, project operations, reviewing and providing engineering and operational support during offshore operations.
• Work in partnership with HSE, Crewing and Marine colleagues towards OVMSA / TMSA compliance, Company Policies as well as related campaigns and initiatives.
• Manage the interface with the clients, intermediaries, ship owners and other stakeholders involved, ensuring active involvement, timely responses with a broader overview of actions, and its consequences.
• Manage vessel’s Class and certification requirements, inclusive of the renewal of certificates & support for vessel’s Flag and Class requirements.
• Ensure reporting monthly to clients on plans ahead for each vessel as well as review of monthly costs, monthly reports, PMS data etc. being communicated from the vessels, accordingly, prepare reports for the MD for his review.
• Approving orders, invoices, and payments up to limit of authorisation.
• Responsible for implementing and maintaining a safe, cost efficient and environmentally sound operation standard in compliance with the Company’s Quality Management System as well as the International Marine regulations, IMCA, and the vessels’ classification.
• Work with all teams for tender bids, submissions etc. as well as operating cost forecast.
• Support the team on emergency responses, clients interface, and with Incident accident investigations, High Potential Near Misses and Technical incidents.
• To maintain a high-quality technical and marine operations consistent with the Offshore Industry standards and guidelines.
• Additional works and tasks as advised by the Managing Director.

Requirements and Exeperience (Essential skills, qualifications, and experience):

• Previous experience in a Shipping and offshore marine operations related company is a must, preferably within a Ship Management organization.
• Prior experience either as a Technical Superintendent or a Vessel Manager for a minimum of 3 to 5 years managing offshore oil and gas assets such as Subsea, Offshore Construction, and OSVs. Having also interfaced or managed conventional vessels would be an added advantage.
• Having sailed as a Marine Engineering officer on offshore or conventional vessels, and should hold a MEO Class 1 or Class II Certificate of Competency as a minimum.
• Recognised marine qualification/experience either at sea or university or shore-based experience would be essential.
• Ability to communicate openly, efficiently, and effectively.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Pre-Production

• Assist to assemble the Technical Production Team for the Exhibition;
• Manage the Exhibition’s technical contractors;
• Work with the Logistics Team to manage the delivery / shipping of the Exhibition’s technical and scenic elements (collectively, the “Technical & Scenic Elements”) from multiple global locations;
• Collaborate with the Exhibition’s Design Team to ensure desired look and feel, as well as durability, are met;
• Cooperate and work with each of the Exhibition’s Technical, Production and Scenic Teams to ensure that the Technical & Scenic Elements are properly integrated.
• Assist to determine the Exhibition’s rigging specifications and subsequently, and to manage the Exhibition’s rigging process;
• Cooperate and work with the Exhibition’s technical teams to determine and source technical hardware and equipment required for the Exhibition;
• Participate in the development of the production schedule for the Exhibition, which shall include, but not be limited to, an on-site daily schedule, a build schedule, and a creative and production preproduction schedule;
• If needed and as required , maintain regular communication with, as well as making visits to, fabrication shops to ensure that quality control and the Exhibition’s creative vision is achieved;
• Liaise with the Exhibition’s Venue (the “Venue”) Team to ensure that the Venue is in a ready state for the purposes of the Exhibition; and
• Liaise with and provide weekly reports to the Exhibition’s Senior Production Manager.

Install

• Lead and manage the installation of the Technical & Scenic Elements;
• Cooperate and work with each of the Exhibition’s Technical, Production and Creative Teams to ensure a smooth installation process; address and resolve any and all on-site issues;
• Manage daily site schedules and movements during the Installation Phase;
• Manage the on-site crew (which shall include, but not be limited to, scheduling); and
• Ensure the timely and safe delivery of the Technical & Scenic Elements to the Venue.

Health & Safety and Compliance

• Advise on event safety for the Exhibition;
• Review the Exhibition’s emergency support functions (ESF) and advise accordingly;
• Generate and provide an event safety plan for the Installation Phase;
• Cooperate and work with the Exhibition’s Production Team to ensure that construction during the Exhibition’s installation phase adheres to applicable laws and regulations (including, but not limited to, health and safety regulations, fire safety regulations);
• Cooperate and work with on-site team at the Venue to ensure applicable health and safety laws and regulations are understood and adhered to by the Exhibition’s contractors; and
• Ensure that the on-site team at the Venue is working in a safe manner during the Exhibition’s installation phase.

Documentation and Final Walkthrough

• Provide support in respect of the aforesaid Services and Deliverables after the opening of the Exhibition, as needed and as required;
• Provide all documentation relating to the Final Walkthrough of the Exhibition

We are looking for a Technical officer to install, maintain, and troubleshoot smart meters for residential, commercial, and industrial customers. The ideal candidate will have strong technical skills, a customer-focused attitude, and experience working in the utility or metering industry.

Key Responsibilities:

• Installation and Maintenance: Install, configure, and test smart meters at customer premises according to industry standards and company procedures.
• Troubleshooting: Diagnose and resolve issues related to smart meter functionality, communication, and data transmission.
• Safety Compliance: Follow all health and safety regulations, ensuring safe working practices in all tasks.
• Customer Service: Interact professionally with customers, explaining procedures and addressing any questions or concerns.
• Reporting: Maintain accurate records of installations, repairs, and inspections. Complete and submit required documentation in a timely manner.
• Technical Support: Provide technical support and guidance to less experienced technicians when needed.
• Equipment Maintenance: Ensure tools and equipment are properly maintained and calibrated.

Qualifications and Skills:

• Education: High school diploma or equivalent. Technical certifications in electrical, electronics, or telecommunications are a plus.
• Experience: Previous experience in utility metering, electrical installations, or a related field.
• Technical Knowledge: Understanding of smart metering systems, data communication protocols, and utility networks.
• Problem-Solving: Ability to diagnose and resolve technical issues efficiently.
• Customer Service Skills: Excellent communication and interpersonal skills.
• Physical Fitness: Ability to work outdoors, lift heavy equipment, and perform tasks in various weather conditions.
• Licenses/Certifications: Valid driver’s license. Industry-specific certifications are advantageous.

Description:

We are looking for a dedicated and talented Technical Superintendent to join our highly skilled and motivated Fleet Technical Operations Team. Our Fleet Team is responsible for the technical management of all operated vessels, ensuring compliance with latest industry standards and demands.

Key Responsibilities:

Reporting to General Manager of Fleet Technical Operations, you will be responsible to ensure efficient and safe daily technical operations of a fleet of Pure Car Carrier vessels (PCC) and Container vessels.

JOB REQUIREMENTS

Job Responsibilities:

• Manage all technical matters and ensure that safety is regarded as a primary responsibility.
• Monitor inventory control of stores and spares, performance of vessels, compliance with all applicable health, safety, security and pollution prevention regulations, certification status of vessels and ensure that at all times vessels are maintained in seaworthy condition.
• Responsible for maintenance, repairs, planned maintenance and modifications to vessels’ hull and machineries.
• To prepare repair specifications and coordinate with various repair firms for effecting major repairs, if any, during, the voyage without incurring delay to vessel.
• Plan, coordinate and execute inspections, dry dockings, lay-up and sale of vessels (in coordination with principals after making cost comparisons with various shipyards and repairers in the most efficient manner.
• Frequent sailing for ships’ inspections is required. Able to work in local and overseas shipyards to supervise dry-docking and other services.
• Follow up closely on performance of all vessels, monitor major deficiencies/defects that exist in the vessels and ensure that timely corrective actions are taken in order that the vessels performance and safety is not jeopardized. Ensure that all Charter Party requirements are being fulfilled and identify reasons for deviation if any and take remedial measures.
• Initiate innovations, savings and improvements within the area of responsibility.
• Monitor the quality of all service providers / vendors.
• Maintain regular contact with Classification societies, shipyards, repair firms, industry groups, trade associations, equipment manufacturers and designers, Government bodies and other organizations that may be helpful to carry out the assigned duties and responsibilities.
• Handling of guarantee issues with regards to new buildings.
• Liaising with Charterers, Flag State and Port State Control and ensure that all vessels certification and surveys for class, flag and international requirements are in order and valid.
• Oversee that all items pertaining to health, safety, security and pollution prevention are regularly checked with the aim of achieving high standards of safe and pollution free voyages and general well-being of all onboard the vessels. Act as a link between vessels and office.
• Manage annual financial budgets and cost control for maintenance, repairs, stores, modifications, and dry-docking, whilst ensuring compliance with Industry, Class and International regulations. (Project operating cost expenses pertaining to technical items before the yearly budgets are prepared).
• Prepare and ensure accuracy of quarterly financial reporting of vessels expenses to principals.
• Prepare yearly budget for vessels assigned.
• To ensure that all technical reports as required by various principals are timely dispatched.
• To verify all incoming reports from the vessels and identify areas which require immediate attention and take corrective actions.
• To report system non-conformities and verify that correction and preventive actions are implemented and found effective.
• Possess good crisis management abilities to manage marine incidents and accidents.

Who we are looking for:

• Degree in Engineering or other relevant degrees.
• Possess Chief Engineer Certificate of Competency.
• Minimum 14 years of sailing experience and recent 1.5 years sailing experience in the capacity as 1st Assistant Engineer on foreign going vessels especially pure car carrier vessels.
• Understand and appreciate the commercial implications of vessel technical operations.
• Detailed and analytical, and have a safety, cost and quality conscious mindset.
• Open to change management and adaptable to a fast and versatile environment.
• Good interpersonal and communication skills in English and Filipino, both written and verbal in order to perform in an international environment.

Job Description:

• Responsible for Sales target in target market segment, channels and customer

development over time

• Provide sales forecast in timely manner and also ensure accurate and timely

response to customers at all time

• Manage, develop, and build relationships with system integrators, consultants, and

end users in targeted market segment

• Sales for complete spectrum of automation products.

• To maintain excellent account management skills with regular visit and calls and

build strong rapport and relationships with internal team and external customers

• To analyze customer’s requirement and develop winning strategies for new prospect

customers

• Conduct sales presentations and product/solution demos

• Prepare and present solution proposals and quotations according to customer

requirements

• Assist and organize marketing events such as seminars, exhibitions, and trainings

Job Requirements:

• Diploma/ Degree in Electronics/ Electrical/ Engineering/ Industrial/ Mechatronic/ Electromechanical
• 1-2 Years working experiences preferred
• Entry level candidates are welcome to apply
• Familiar / Experience with Industrial/ Factory Automation will have added advantage
• Training on products will be provided

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possess own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road
• 5.5 work day

Responsibility:

• Overseeing projects and monitoring activities at worksites.
• Managing workers and ensuring adherence to safety standards.
• Coordinating tasks and scheduling.
• Liaising with clients and vendors.
• To prepare jobsheets for timely submission
• To handle any other assignments, eg. ad-hoc duties

Requirement

• Diploma Civil Engineering / Engineering
• Minimum 5 years of relevant experience in the construction sector
• Possess Valid Class 3 Driving license
• Only Singaporean or PR

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description:

• Identified new design-in opportunities and influencing customer decision to secure design-wins for the electronics components line card the company represented
• Proposal alternative solutions, develop solution to provide different design approaches
• Conduct Technical product presentation, training and Demo
• Provide technical support, hand on technical training to customers
• Maintain good relationship with existing customers and suppliers technical teams
• Work closely with sales and marketing, suppliers to provide technical support and resolve design issues from pre-sales stage till mass production
• Address quality issues (FA) with customers and suppliers.

Job Requirement:

• Bachelor’s Degree in Electronic Electrical Engineering or equivalent
• Good electronics system knowledge
• Experience working in electronics distribution business
• Passion in following up project and eventually winning the project
• Good Communication, presentation and follow up skill

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Ship building Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles that occurred to the working vessels and establish a proper restore/repair plan.
• Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Master’s degree in mechanical or shipbuilding engineering.
• Minimum 10 years of experience in mechanical or shipbuilding engineering.
• Minimum 2 years of experience as a project manager in new shipbuilding development.
• Minimum 1 power cable laying vessel construction supervision experience.
• Minimum 1 LNG dual-fuel or methanol dual-fuel vessel with basic design experience.
• Minimum 2 years of experience working in a Japanese engineering team.
• Experience in detailed design of hull piping.
• Able to use CAD and to draw a piping diagram on its own.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery. Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels.
• Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel masters shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and Ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 7 years of higher education in mechanical and/or naval engineering.
• Minimum 4 years of experience with designing for installation of special equipment in shipyards.
• Minimum 3 years of experience in considering ship specifications at companies operating work vessels.
• Experience in shipbuilding projects for special vessels that require advanced technical capabilities in Power/Air supply systems, Mechanical alignment, Procurement and overseeing vendors.
• Experience in boarding cable-laying vessels with a cable capacity of 10,000 tons or more.
• Expert knowledge of cable laying equipment installed on cable laying vessels.
• Expert knowledge of cable laying work using cable laying vessels.
• Good knowledge of Working class ROV and Trencher.
• Good knowledge of marine engineering, structural mechanics, ship design and mechanical design.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers during the project period

• Experience in supervision of underpinning work.
• Experience in concrete technology, inspection, quality control, and quality assurance procedures related to the casting of concrete structures.
• Degree in Civil & Structural Engineering.
• Minimum Three (3) years of relevant experience, experience in bridge/viaduct construction preferred.
• Shall be an engineer in the civil/structural discipline with a qualification accredited by JAC of IES/ACES as RTO.
• LTA Project