Technical Safety Specialist (Ref.No. R1007102)

at our location in Singapore

This Technical Safety Specialist is reporting directly to the System Assurance Manager.

This Technical Safety Specialist is responsible for the execution of RAMS Engineering activities in accordance with the company’s processes, applicable industry standards and best practices.

You will enjoy having these responsibilities:

• Execution of RAMS Engineering activities in accordance with the company’s processes, applicable industry standards and best practices;

• Ensure RAMS strategies are flowed down throughout the project organisations;

• Perform hazard identification studies, hazard analyses, safety analyses and hazard management;

• Define safety requirements; analyse and evaluate design compliance with safety requirements and safety principles;

• Review safety test strategies, plans, procedures, scenarios and test results;

• Review Installation, Cut-in / Cut-out, T&C, and Deployment method statements;

• Review the adequacy and completeness of safety evidence and produce safety artefacts;

• Ensure effective communication of Safe Operating Requirements (SORs) to Customer;

• Perform RAM analyses and manage RAM demonstration;

• Interface the Customer and other parties for project RAMS coordination;

• Interface the organisation management for RAMS activities internal reporting;

• Maintain KPI on RAMS activities including: Quality, Cost and Deadlines;

• Other tasks as assigned by the direct manager.

You have:

• Bachelor’s degree or higher in Engineering Fields of Electrical, Electronic, Computer Science & Engineering, or related discipline

• Good knowledge of CENELEC (EN) Railway RAMS Standards

• Good knowledge of railway signalling principles and CBTC system

• Minimum 5 years’ experience in RAMS Engineering on railway safety-related systems including minimum 2 years’ RAMS experience on CBTC system; OR

• Minimum 5 years’ experience in Design & Engineering (System, HW and/or SW), Integration, Testing, Verification and/or Validation of CBTC system

Responsibilities

• Collaborate with stakeholders to gather, document, and prioritize business requirements.
• Analyse existing processes and identify areas for improvement through technology.
• Create high level technical specifications and functional requirements documents.
• Work with development teams to provide high level design and impacted systems.
• Conduct feasibility studies and impact analyses for proposed changes.
• Facilitate meetings and workshops to gather input and feedback from stakeholders.
• Assist in testing and validation of solutions to ensure they meet business needs.
• Develop and maintain project documentation, including user stories, use cases, and process flows.
• Provide ongoing support and troubleshooting for implemented solutions.
• Stay updated with industry trends and best practices to recommend innovative solutions.

Qualifications

• Bachelors degree in Computer Science, Information Technology, or a related field.
• 5+ years of experience as a Business Analyst or Technical Analyst in a similar role.
• Strong understanding of software development life cycles (SDLC) and methodologies (Agile, Waterfall).
• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills, with the ability to translate technical concepts for non-technical stakeholders.
• Experience with data analysis tools (e.g., Excel) is a plus.
• Familiarity with project management tools (e.g., JIRA, Trello) is desirable.
• Experience in telecommunications industry is a plus.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery. Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels.
• Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel masters shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and Ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 7 years of higher education in mechanical and/or naval engineering.
• Minimum 4 years of experience with designing for installation of special equipment in shipyards.
• Minimum 3 years of experience in considering ship specifications at companies operating work vessels.
• Experience in shipbuilding projects for special vessels that require advanced technical capabilities in Power/Air supply systems, Mechanical alignment, Procurement and overseeing vendors.
• Experience in boarding cable-laying vessels with a cable capacity of 10,000 tons or more.
• Expert knowledge of cable laying equipment installed on cable laying vessels.
• Expert knowledge of cable laying work using cable laying vessels.
• Good knowledge of Working class ROV and Trencher.
• Good knowledge of marine engineering, structural mechanics, ship design and mechanical design.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers during the project period

• Experience in supervision of underpinning work.
• Experience in concrete technology, inspection, quality control, and quality assurance procedures related to the casting of concrete structures.
• Degree in Civil & Structural Engineering.
• Minimum Three (3) years of relevant experience, experience in bridge/viaduct construction preferred.
• Shall be an engineer in the civil/structural discipline with a qualification accredited by JAC of IES/ACES as RTO.
• LTA Project

JOB DESCRIPTION

Job Title

Technical Delivery Manager

Occupation

SENIOR APPLICATION SYSTEM MANAGER

Job Description & Requirements

About the Client:

Our client is MNC company

Responsibilities:

• Manage the end-to-end technical delivery of large IT projects, including scope, cost, quality, and time management; stakeholder communications; risk, issue, and dependency management; and project reporting and governance.
• Develop and maintain project plans, status reports, and other project-related documentation to ensure effective communication among stakeholders and project team members.
• Lead and mentor a team of developers, providing guidance and support throughout the project lifecycle.
• Collaborate with cross-functional teams, including business analysts, project managers, and other stakeholders, to ensure alignment and effective communication.
• Identify and mitigate risks and issues related to technical deliverables, proactively resolving any roadblocks to ensure project success.
• Ensure adherence to coding standards, best practices, and security guidelines across all development activities.
• Provide regular updates on project progress, highlighting key milestones, risks, and issues to relevant stakeholders.
• Contribute to the continuous improvement of development processes and methodologies.
• Conduct code reviews and provide constructive feedback to team members to ensure high-quality deliverables.

Requirement:

• Minimum 5 years of working experience in E2E project implementation.
• Good understanding and experience in Software Development Life Cycle (SDLC).
• Working experience with AML (specifically transaction monitoring).
• Experience in working in vendor environment.
• Ability to work in a fast-paced, team-oriented environment.
• Experience with managing end to end implementation of projects.
• Experience with managing and working with external vendors/teams.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Ship building Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles that occurred to the working vessels and establish a proper restore/repair plan.
• Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Master’s degree in mechanical or shipbuilding engineering.
• Minimum 10 years of experience in mechanical or shipbuilding engineering.
• Minimum 2 years of experience as a project manager in new shipbuilding development.
• Minimum 1 power cable laying vessel construction supervision experience.
• Minimum 1 LNG dual-fuel or methanol dual-fuel vessel with basic design experience.
• Minimum 2 years of experience working in a Japanese engineering team.
• Experience in detailed design of hull piping.
• Able to use CAD and to draw a piping diagram on its own.

About the Company

A dynamic and growing subsidiary of a Sweden-based MNC, is a leader in the field of ultra-pure fluid transfer systems. A strong global presence spanning 28 countries and the regional headquarters in Singapore, they are committed to innovation and expansion within the ASEAN region. The company specializes in providing best-in-class transfer systems, including tubes, hoses, fittings, and more, to meet the stringent demands of industries like biomedical, pharmaceutical, and chemicals and continue with their growth and success.

Job Description

The company is seeking a highly motivated and results-oriented Technical Sales Specialist; who will play a crucial role in driving revenue growth and expanding the company's market share in Singapore. This candidate will be responsible for selling and marketing a diverse range of fluid transfer products and single-use assemblies, delivering customized solutions that meet the highest standards in ultra-pure fluid transfers.

Key Responsibilities:

● Develop and execute strategic sales and marketing plans to achieve revenue targets and expand the customer base.

● Identify and pursue new business opportunities while nurturing relationships with existing clients to maximize account penetration.

● Provide exceptional customer service, including prompt and effective handling of inquiries and technical support.

● Conduct product presentations and demonstrations, showcasing value propositions and technical specifications to potential customers.

● Collaborate with internal stakeholders, including the sales and marketing team, engineering, production, and customer support, to ensure seamless order processing, project intake, and customer satisfaction.

● Maintain accurate records of customer interactions, sales activities, and project updates in the company's CRM and ERP systems.

● Stay abreast of market trends, competitor activities, and emerging technologies within the Life Sciences industry.

● Contribute to a positive and supportive team environment where knowledge sharing and collaboration are highly valued.

Qualifications:

● Minimum a Diploma or Bachelor's degree in Biotechnology, Life Sciences, or a related field.

● Proven track record of sales success, preferably within the Life Sciences industry, with 1-2 years of experience or more, particularly in sectors like biomedical, pharmaceutical, chemicals, water treatment, food and beverage, and biofuel.

● Strong technical aptitude with the ability to understand and effectively communicate complex product information.

● Excellent communication, presentation, and interpersonal skills, with the ability to build rapport with clients and internal stakeholders.

● Self-motivated and results-oriented, with a strong work ethic and a passion for sales excellence.

● Proficient in Microsoft Office Suite (Excel, Word, PowerPoint).

Benefits:

● Comprehensive product training to enhance your technical expertise.

● Opportunities to learn and grow with a company expanding its market presence in the ASEAN region.

● Opportunities for professional growth and development within a dynamic and expanding organization, including potential paths in assembly services, commissioning, installation, and support services.

● Competitive compensation and benefits package.

To Apply:

Please submit your resume and a compelling cover letter outlining your relevant experience and qualifications to [email protected]

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Instructional Designer /Technical Writers to join hands with highly talented product development teams in producing documentation for the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the CloudAz XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We are looking for a talented Instructional Designer/Technical Writer to develop and implement effective product and implementation training courses for our award-winning Information Risk Management products. You will be responsible for creating engaging and educational content that will support our customers, from administrators and end-users to developers and IT architects. Join a rapidly growing company that delivers solutions for an increasingly critical component of information technology.

Acting as owner for all product documentation in your area, your core responsibility will be to document product and implementation training courses and keep pace with our rapid software development lifecycle. You will also participate in design, review, and testing cycles, playing the role of anticipating the impact of new products and technologies for our users. The team here is genuinely excited about our cutting-edge products. We are seeking a candidate who shares our enthusiasm and commitment to excellence.

Responsibilities

• Design and develop interactive and engaging training content, including e-learning modules, instructor-led training materials, and user manuals.
• Collaborate with subject matter experts SMEs to gather information and ensure the accuracy of training content.
• Develop comprehensive training programs that cover product features, best practices, and implementation strategies.
• Write clear, instructional content tailored to diverse audiences, including administrators, developers, and end-users.
• Create supporting material/media (audio, video, simulations, games and so on).
• Learn and deepen your knowledge of NextLabs products and integrated third-party products.
• Manage the lifecycle of training projects, ensuring timely delivery and alignment with product updates and releases.
• Utilize various learning management systems (LMS) and technical writing tools to deliver training content.
• Evaluate the effectiveness of training materials and make improvements based on feedback and performance metrics.

Required Skills

• Bachelor's degree/Diploma in Computer Science, Information Technology, or a related field.
• At least 3 years’ experience in developing instructional materials for enterprise software applications.
• Ability to write clear, succinct and accurate documentation, including conceptual information and procedural instructions for administrators, developers and end-users.
• Ability to work independently with minimal supervision.
• Ability to ramp up quickly on new technologies.
• Excellent interpersonal communication skills and ability to work with globally dispersed teams.

Desired Skills

• Knowledge of instructional design theories and best practices.
• Familiar with tools for generating LMS content and training courses.
• Experience developing training courses for applications in the Cloud.
• Knowledge of risk management or identity management software products is a plus.

Interested candidates may send resume to [email protected] or use our online form.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

· Consults with customers to produce the dashboards and reports they need

· Coordinates with the Assure Claims Base Development team on base Sisense elasticubes and customer requirements

· Coordinates with Sisense vendor on defects and enhancements

· Stays current on Sisense system, its functions, and how to work with Assure Claims

· Design, develop, and optimize Sisense data models and dashboards to provide actionable insights

· Write custom JavaScript and CSS for enhanced dashboard functionality

· Manage Sisense system upgrades and troubleshoot related issues

· Develop and maintain Jaspersoft reports and administer Jaspersoft Server

Requirements:

· Bachelor's degree in business administration, computer science, IT or related field preferred

· Minimum 5+ years of experience in Sisense and Jaspersoft, including data modelling and report creation

· Hands-on experience with Sisense upgrades and Kubernetes-based environments

· Database design knowledge required; SQL is must.

· Sisense reporting tool working experience is preferred

· SAP Business Objects reports consulting experience preferred

· Power BI data analytics tool consulting experience preferred

· Experience working with communications practices, principles, and procedures for both on-site and on-line presentations

· Willingness to travel, although it will be infrequent

Monitors and controls the safe and cost efficient technical operation of all assigned vessels using the available resources, within the defined parameters of cost, commercial viability and operational excellence in line with Owners expectations. Ensure environmental compliance policies are upheld.

Ship technical support

• Understands the contractual agreements with customers to be able to deliver the same with regards to the ship management services for each assigned vessel, in a safe and cost efficient manner.

• Monitors the effective operation of the equipment and machineries of the assigned vessels, identifying potential discrepancies from operational standards and proposes and/or implements solutions that will enhance the efficiency, performance and safety of the vessels.

• Participates in the development of the maintenance and repairs plan for the assigned vessels and monitors its accurate execution in order to identify compliance of operations according to time schedule, quality of deliverables and budget.

• Projects the requirements in maintenance and repairs activities, spare parts and technical training of the assigned vessels in order to provide valuable information for the development of the budget and maintenance plan of the vessels. Upon approval, follows-up its accurate execution, identifying, reporting and providing solutions in potential discrepancies.

• Monitors all vessels trading certificates to ensure compliance with existing maritime legislation, safety regulations and operational standard requirements of all regulatory bodies.

• Oversees and monitors the overall technical operation of the assigned vessels, ensures the timely and accurate completion of dry-docking on budget and of other relevant shipboard maintenance and repair activities, in order to support the operational effectiveness of vessels and increase customer’s satisfaction and commitment.

Execution of technical inspections

• Manages all vessel visits, audits and inspections effectively right from planning

Education and Qualifications:

• B.S. degree in Mechanical, Electrical or Marine Engineering, Naval Architecture or equivalent, or

• Chief Engineer’s qualification.

Work Experience:

• 5 years of sailing experience as Senior Officer, or

• 5 years of shore experience as a technical superintendent with a ship management/owning company, or

• 5 year of combined experience of the above positions.

Job-Specific Skills:

• Strong knowledge of bulk vessels’ technical requirements and voyage regulations

• Excellent project management skills

• Very good negotiation skills

• Very good people management skills

• Team work and cooperation

• Very good organisational skills

• Worldwide operations require fluency of the English and Chinese language

• Willing to travel or relocate

Job Summary

The Lead Salesforce Architect role will be responsible for building and mentorship of a multi-skilled Salesforce team as well as design and implementing Salesforce solutions for our customers that follow best practices in both IT and Salesforce projects.

Responsibilities

• Manage robust teams of Salesforce.com delivery team members, including BAs, Tech Leads, Architects, Developers & QA
• Perform project and program management activities, including project financials.
• Liaise and manage collaboration between horizontals to bring in synergies and ensure successful delivery
• Take accountability of delivery of work packages to customer facing project teams, ensuring packages are delivered on time and with quality
• Ensure for all projects, each Apex method developed has an equivalent test method with at least one valid unit test (using an assertion)
• Ensure total test coverage within QA and higher environments is at least 85%
• Ensure all code is peer-reviewed against Cognizant development standards prior to deployment to QA
• Maintain and publish Salesforce development standards to broader technical teams on a quarterly basis
• Ensure developers are incorporating code review feedback prior to deployment to QA. Enforce the practice with regular training & project audits.
• Ensure version control has been correctly setup at the beginning of the project
• Ensure all developers are using version control as the source of truth for development
• Be an active part of the COE, owing technical & solution reviews for all projects on a regular basis
• Reporting to internal senior management or Leadership teams on the overall engagement (across different dimensions like delivery, bid management, staffing, financials etc.
• Ability to understand pain areas of business and present workable solutions
• Acts as the escalation point when issues arise and understand what to do and who to work with to resolve them.
• Ability to stay focused in a fast-paced, high-energy, challenging environment where there are multiple competing priorities on a daily basis.
• Work closely with business analysts, architects, developers, testers and a variety of IT and business stakeholders.
• Keeping up to date with Salesforce releases and new functionality.
• Adhere to company and project standards and guidelines.
• Accurate time management and reporting of own work.
• Quality, on time delivery of agreed deliverables.
• Ability to work on multiple applications/ projects/ BAU enhancement simultaneously and must have a “can do” attitude.
• Grow the maturity of our practice by leading internal initiatives to further develop methodology, tooling, and skillsets. This includes owning our Architect & CTA Academy, enable CICD & version control for all projects
• Define & enable development plan for TL’s to make them into strong TA’s
• Help drive bootcamp for developers and enforce best practices in all our developers

Requirements

• Extensive years of experience in handling large delivery engagements with a strong experience in managing SFDC programs
• Deep knowledge and expertise across the Salesforce.com platform (Sales Cloud, Service Cloud, etc.), including experience delivering complex SFDC solutions
• Has delivered multiple full end-to-end Salesforce.com implementations/projects, especially including highly integrated/complex ecosystems. Understands how to deliver capabilities on Salesforce AppExchange products
• Strong program management and problem-solving skills
• Should have excellent presentation and written communications skills
• Strong Exposure to SDLC and Agile methodologies
• Exceptionally strong in scope management
• Has ownership for key projects’ timelines, deliverables, budget and metrics
• Proven ability to efficiently manage a portfolio and drive operational improvements
• Should be flexible in time and attitude
• Works independently to manage the whole program and respective stakeholders/ and projects
• Hands on experience with setting up branching strategy, version control & CICD

Qualifications

• Platform Developer I (mandatory)
• Platform Developer II (desirable)
• Salesforce Application Architect (mandatory)
• Salesforce System Architect (desirable)
• Integration Architecture certified (desirable)
• TOGAF Certified (desirable)
• Project Management or Delivery focused certification (mandatory)

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Computer Science.
• 10+ years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Microservices, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization.

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices.

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

Roles & Responsibilities:

- Provide support to the superintendent in the planning, execution, and finalization of dry dock and repair projects, and attend the project site as required.

- Assist the superintendent with the preparation of the OPEX budget.

- Coordinate and arrange service engineers for boarding operations.

- Review, update, and prepare vessel shareholder presentations for timely submission.

- Maintain records of fleet service arrangements and End of Month (EOM) reports, including technical bulletins from manufacturers.

- Prepare and complete monthly post-meeting reports for Charterers/Fleet.

- Administer the disbursement account, ensuring line items and account codes are accurately detailed.

- Review Management Meeting minutes and provide a summary to the superintendent.

- Distribute monthly Class status reports to vessels, including details on expiring certificates.

- Assist with tasks related to EU ETS, EUMRV, and IMO DCS compliance.

- Support the review and processing of PAL occurrences as guided by the Fleet Manager, and help the superintendent close occurrences using Tableau data.

- Appoint Agents following the superintendent's instructions.

- Handle any other required documentation and filing tasks as assigned by the team.

- Assist the superintendent with Guarantee claims management.

- Support both internal and external Survey and Audit Requirements.

- Monitor and report progress on the Teams' "Management of Change" initiatives.

- Review and manage fleet weekly operational data and monthly KPIs, ensuring that the fleet team stays informed.

- Create and finalize presentations for Charterers/Owners as needed by the Fleet team.

Requirements:

- Bachelor’s Degree (preferably in ship management, maritime operations, or a related science discipline).

- Training in Secretarial skills.

- Excellent written and verbal communication abilities.

- Motivated to thrive in a dynamic, challenging, and results-oriented environment.

- Fresh Graduates are encouraged to apply!

Ackcio Pte Ltd builds reliable wireless monitoring solutions for industrial applications. Our Ackcio Beam suite of products runs off our core technology, a long-range, low-power radio wireless mesh communication to reliably transmit industrial sensor data in real-time both underground and above ground. Currently our technology is widely used in construction, mining, infrastructure, and rail industries to automate the monitoring process, improve productivity, and make the activity safe. We now help major clients in 45 countries across 6 continents monitor their projects with our technology.

Ackcio was incorporated in Singapore in 2016, and has drawn investments from prominent investors including Wavemaker Partners, Enterprise Singapore, Accelerasia, Aletra Capital Partners, Foundamental, and EF.

Responsibilities

• Be the go-to person for clients, helping them get the most out of our products.
• When customers run into challenges, you’ll work with them to come up with easy, clear solutions.
• Suggest ways to improve user experience and get more people using our products.
• Guide clients on the best ways to use our products and how they can get the most value.
• Look for ways to help customers expand how they use our product and offer them more value.
• Share customer feedback and ideas for improvement with the rest of the team.
• Share your product expertise in customer interactions to help them succeed.
• Communicate with customers via email, and phone to help them get the hang of our products.
• Provide ongoing support to ensure customers continue to succeed with our solutions.
• Represent customer needs and issues to make sure they’re heard across the company.

Requirements

• A background in technology, computer science, or IT/networking.
• Fluent in English; additional languages are a plus.
• Willing to travel for customer site visits with on-site troubleshooting work if required.
• Excellent communication skills and a friendly attitude.
• Strong problem-solving abilities and quick to learn.
• Ability to handle multiple tasks and meet deadlines.
• A self-starter, both independent and team-oriented.
• Proven track record in customer support and problem resolution.
• Passionate about helping customers succeed.

Quality Assurance Department (QAD)

Job Responsibilities:

• Liaise with Maintenance team to schedule lift inspections.
• Conduct lift inspection in accordance with applicable code requirements
• Prepare inspection reports.
• Verify correction of defects.
• Perform any other duties as assigned from time to time by the Company’s authorized personnel.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift Inspection, Testing & Commissioning or Maintenance preferred.
• Good communication skills.
• Only Singaporean need to apply

Responsibilities

• On-site Supervision of the following areas: Architectural;
• Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings;
• Highlight discrepancies, feedback site progress, safety and non-conformances to Consultants / Employer;
• Assist the Resident Engineer in carrying out supervision works on site and also assist in supervising & co-ordination with other consultants’ site staff;
• Carry out administrative works and other duties as required by QP / Consultant / Employer;
• Quality control of all civil, structural and architectural works such as inspecting materials and workmanship and performing tests to check the quality of materials;
• Assist in the review of contractor's method statements and working procedures and ensure that contractor proceeds in accordance to approved method statement;
• Keep, maintain and submit daily site record on progress of works, instructions given to Contractors, materials delivered to site, daily activities and weather conditions at site, number and visitors at site and any other significant information;
• Attend site/coordination meetings as directed;
• Prepare defects snagging list, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified;
• To ensure all the contractor’s works are in statutory compliance; *Provide full-time supervision of structural works in large building works

Requirements

• Minimum 5 years of site experience in the supervision of various types of developments;
• Must be accredited with the IES-ACES Joint Accreditation Committee (JAC);
• Prior experience in precast construction and architectural finishes;
• Able to work overtime when required by schedule.

Role: Lead Technical Consultant

Responsibilities

• Responsible for Design and delivery of DeltaV systems on site.
• Participate in the design, development, and implementation of Automation solutions in line with S88 standards for the plant.
• Lead team of engineers to deliver the Automation Project on site.
• Lead, design Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards.
• As a Subject Matter expert, lead development of systems architecture, specifications, controls strategies, sequence of operations through all design stages
• Build and maintain trusted relationships with client.

Requirements

• Good technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Good experience In Automation Sector ideally in the Pharmaceutical and/or Biotechnology industry.
• Good Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc),
• Familiarity with GAMP lifecycleand quality management processes employed in the pharmaceutical sector.
• Excellent computer skills, proficient in Microsoft Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills.
• Leadership abilities, works well in a team environment.
• Capacity to lead team of engineers for design, development, and delivering Automation projects.
• Experience with Operations Support on site
• Good analytical & problem-solving skills

About Cognizant

Cognizant (NASDAQ-100: CTSH) is one of the world's leading professional services companies, transforming clients' business, operating and technology models for the digital era. Our unique industry-based, consultative approach helps clients envision, build and run more innovative and efficient businesses. Headquartered in the U.S., Cognizant is ranked 195 on the Fortune 500 and is consistently listed among the most admired companies in the world. Learn how Cognizant helps clients lead with digital at www.cognizant.com or follow us @Cognizant.

Resident Technical Officer

Salary range: 4.5 k to 5.5 k

Key Responsibilities

• Supervise construction & architecture related works, maintain building quality control and ensure works are carried out in accordance to specification, drawings, instruction etc.
• Supervision of the construction of the structural works under the Building Control Act and to render all assistance as may be required by the consultant.
• Familiar with PPVC Construction would be advantage
• To carry out all duties required of a RTO under the BCA regulation

Technical Skills & Competencies

• Well-versed in Local (Singapore) Regulatory Requirements
  i.e. Approved Document, Accessibility Code, FSSD requirement
• Well-versed in Technical Detailing and Drawing
• Project Management
• Construction Technology

Other Skills & Competencies

• Leadership
• Decision Making
• Teamwork
• Communication
• Interpersonal Skills

Job Role Requirements

• Minimum 2-3 years’ local (Singapore) experience as a C&S /Architectural RTO
• Possess a valid RTO Certificate
• Experience in HDB BTO projects
• Registered with IES/ACES
• Good Command of Autocad/IT knowledge
• Able to work independently and positive work attitude
• Ability to follow up tasks & meet dateline pressure
• Sense of responsibility

Sent your Resume & Cover Letter to [email protected]

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge.
• To constantly monitor improve the department performance. To conduct periodic review of existing work flows and procedures, and make recommendations for improvements and executing the improvement plans.
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution.
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff.
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly.
• To implement and supervise correct EHS practices within the department.rnal departments on incoming waste discrepancy and revise related SOPs accordingly.ent.
• To implement and supervise correct EHS practices within the department.
• To work with resale for arrangement of recovered products to minimize the storage.
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely.
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations.
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency situation. To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time.
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely.

Secondary responsibilities

• To undertake any other tasks assigned by the Management from time to time.
• As an ISO committee member, to develop and implement documents for operation procedures, such as SOP, RA and MOC, SWP and participate in auditing the various departments as an Internal Auditor

Requirements:

• Degree in Engineering or Chemistry
• At least 2 years relevant experience
• No colour blindness

Remuneration:

• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• Sign-on bonus
• AWS & Variable bonus

Job Description

• Industry/ Organization Type: Manufacturing (Consumer Appliances)
• Position Title: Technical Support Assistant
• Working Location: Pasir Ris
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $3,500 + AWS + Overseas Allowances + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Troubleshoot various hotel guestroom appliances such as safes, minibars, kettles, hairdryers, irons, and clocks.
• Manage the entire spare parts inventory and improve inventory control processes.
• Handle technical issues for local and overseas hotel customers and generate investigation reports.
• Collaborate closely with certification and sales colleagues to address challenges.
• Participate in testing, evaluating, and implementing new products.
• Visits to overseas customers/distributors to provide technical support.

APPLY NOW!!!

• A diploma or degree in electrical and/or mechanical engineering is advantageous.
• Familiarity with Microsoft Word, Excel, and PowerPoint.
• A hands-on, eager-to-learn, and progressive attitude.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69028 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781