Responsibilities:

· To carry out the duty as Resident Technical Officer as per the Building Control Act (Chapter 29), upon issuing of permit to carry out structural works by BCA till the completion of structural works at site.

· Monitor contractors' daily activity, site progress, schedule and safety on site.

· Carry out administrative works and other duties as required by QP/Superintending Officer/Consultant/Employer.

· Review and check all the drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.

· Highlight discrepancies, feedback site progress and non-conformances/irregularities to QP/Consultants/Employer.

· Assist in reviewing of contractor's method statements and working procedures and assure contractor followed on site.

· Prepare lists of defects, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified.

· Ensure that all the construction works have complied with statutory requirements.

· Supervision of all Architectural and C&S works as required under the project and mandated under the Building Control Act & Regulations

· Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

· Not engage in any unsafe or negligent act that may endanger yourself or others working around you.

· Use personal protective equipment provided to you to ensure your safety while working. You must not tamper with or misuse the equipment.

· Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

· Not engage in any unsafe or negligent act that may endanger yourself or others working around you.

· Use personal protective equipment provided to you to ensure your safety while working. You must not tamper with or misuse the equipment.

· Contract Period: 12 months with option to extend on a monthly basis

Requirements:

· Diploma holder or higher in C&S discipline

· Must be experienced in reviewing Architectural and C&S Works

· Min. 5 years of experience as RTO on local projects of structural works of at least 4 stories superstructure and with basements

· Must have experience in both reinforced concrete, prestressed and steel structures

· Must have experience in piled foundation projects

· Good communication skills

· Accreditation of C&S RTO Certificate by IES

· Required experience in supervision work for structural works

Working Hours

· Working hours shall be from 8.30 am to 5.30 pm Mondays to Fridays (inclusive of one hour lunch break) and on Saturdays, from 8.30 am to 12.30 pm (4 working hours).

· In view of the nature of your work, you may be required to work beyond the hours stipulated as and when required.

Gratuity

· There will be no gratuity for this employment contract

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Technical Sales Manager (Telco/DC Power Solutions)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 5500 + Allowances + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Identify and pursue new business opportunities within the Telecom sector for DC power solutions in Singapore and neighbouring countries
• Cultivate and maintain relationships with key decision-makers and stakeholders
• Develop and implement effective sales strategies to achieve revenue targets
• Collaborate with the marketing team to create compelling sales materials
• Possess in-depth knowledge of DC power systems and their applications in the Telecom industry
• Conduct product presentations and demonstrations for potential clients
• Nurture and maintain strong relationships with existing clients to ensure customer satisfaction and repeat business
• Address customer inquiries and concerns promptly and professionally
• Stay informed about industry trends, competitor activities, and market dynamics
• Provide feedback to the product development team based on market insights
• Collaborate effectively with cross-functional teams, including marketing and technical support

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering
• Min 3 years of working experience in Sales, specifically within the Telecom industry specializing in DC Power Solutions
• Proficient in Microsoft Office and CRM software

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66251 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Location: North-east
• Industry: Construction (M&E)

Key Responsibilities:

• Oversee the preparation and submission of M&E tenders, including evaluating technical specifications, cost estimates, and project timelines.
• Manage all M&E Quantity Surveying (QS) tasks, from tender preparation to pre- and post-contract administration.
• Collaborate with consultants, attend site visits, tender briefings, and clarify tender requirements to ensure project alignment.
• Analyze specifications, review tender documents for discrepancies, and ensure compliance with project requirements and industry standards.
• Conduct technical evaluations of tender documents, identify potential risks, and develop mitigation strategies.
• Work closely with the tender team to achieve performance targets and KPIs.
• Propose value engineering solutions for M&E works during the tender process.
• Prepare and present tender documentation, including technical write-ups, project scope, manpower plans, and schedules using Microsoft Project.
• Evaluate supplier and subcontractor quotations to ensure alignment with tender requirements.
• Provide technical guidance to support decision-making during tender evaluations.

Requirements:

• Degree or Diploma in Mechanical Engineering, Building Services, or a related field.
• Minimum of 8-10 years of experience in mechanical services within the construction industry.
• Strong knowledge of M&E works, planning, and statutory compliance.
• Proven experience in Design & Build tenders for M&E services is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Overall responsible for technical operations of the assigned oil tankers.
• Ensure that the vessels achieve the necessary technical standards and performance.
• Manage the vessels certificates and documents to ensure they are systematically updated and stored.
• Prepare and manage vessels’ technical budget and monitor dry-dockings and other required repairs and maintenance jobs.

Requirements:

• Chief Engineer or Second Engineer (COC Class 1/Class 2)
• At least 2 years of experience as Technical Superintendent for Oil tankers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Netpoleon Solutions is a well-established IT Network Security solutions provider and the Asia arm subsidiary of Macnica Inc – a Global Company with trillion-yen revenue.

Netpoleon Solutions has offices in Singapore, Malaysia, Indonesia, Philippines, Thailand, Vietnam, Myanmar, India, Australia and New Zealand, with its parent Company based in Japan.

We are now inviting individuals to join the Singapore office. Candidate applying should have a strong analytical mind and possess excellent cybersecurity skills and knowledge. If you have these qualities, you will embark on an exciting career together with us to pursue our strategic expansion.

Job Responsibilities:

• Deploy and provide professional services: This includes, but is not limited to, the implementation and upgrading of Cybersecurity products that Netpoleon distributes. Occasionally, this will involve managing customers and timelines.
• Provide workable solutions: Offer solutions (or alternatives) based on customers’ requirements.
• Conduct product training: Provide training on our products to customers, partners, and internal teams.
• Perform installations and configurations: Carry out installations and configurations independently using product manuals.
• Upskill and certification: You will upskill and obtain technical certifications for the products or technologies you handle, as applicable.
• Subject matter expertise: Over time, become a subject matter expert to assist in transferring domain knowledge and technical skills to our maintenance team to better support our customers.
• Technical assistance: Support the sales and support teams in technical matters, such as product feature clarification, implementation considerations, tender compliance, and other ad-hoc situations.

Job Requirements:

• Positive and professional working attitude.
• Ability to work both independently and as part of a team.
• Capable of handling stress, meeting tight deadlines, and thriving in a fast-paced environment.
• Nitec/Higher Nitec certificate, Diploma or Degree in IT, IS, Cyber Security, or related fields.
• Minimum 2 years of work experience in IT, IS, Cybersecurity preferred. Candidates without relevant work experience may be considered for an Associate Engineer position.
• Strong understanding of technology infrastructures such as Firewalls, VPN, DLP, IDS/IPS, Web-Proxy, DNS, Email Security, Log Management, SIEM, Virtualization, Containers, AWS, Azure, Google cloud, DevOps/DevSecOps, Privilege Account Security, Identify Access Management, Endpoint Security, CyberArk Conjur.
• Proficiency in troubleshooting various technologies, network, and system issues including routing, NAT, VLAN, Multicast, TCP/IP, OSPF, BGP, AD, LDAP, RADIUS, SNMP, Syslog, SMTP, TLS, SSH.
• Demonstrate a strong interest in staying updated on cybersecurity trends and hacking techniques.
• Preference will be given to candidates with certifications such as Cisco CCNA/CCNP, Check Point CCSE/CCSM, Thales, CyberArk CDE, Trellix, ArcSight ESM/Logger, ITOM, SailPoint, CISSP, CREST, OSCP.
• Proficiency in programming language like Python, C++, Java, JavaScript, Ruby, Bash scripting, and Power Shell is advantageous.
• Compliance with Company Information Security Standards.

Other Information:

• Working hours: 9am to 6pm, Monday to Friday*
• Salary will commensurate with qualifications and experiences
• 13th month AWS / Variable bonus
• Training consisting of in-house and vendor-led will be provided. Additional sponsored training available to confirmed staffs subject to performance assessment.
• This position is suitable for individuals with a strong technical background and professional experience, aiming to transition into a senior technical role at our Singapore office in the future.

*Expected to work on after office hours, Sat/Sun/Holidays when required by customers.

Interested candidates, please apply via the “Apply Now” button below.

We regret that only shortlisted candidates will be notified.

Just imagine your future with us…

At Aurecon we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position you will join our Singapore Buildings business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it’s the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Taking responsibility for projects from initial design, through to construction and final review.
• Working in collaboration with other design disciplines, locally and regionally to ensure the integrity of the overall design.
• Managing projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications.
• Assisting in workload management and resource forecasting and involved in preparation of proposal documentation.
• Reviewing and ensuring compliance, including drawings, reports, specifications, survey, access, and preparation of appraisals.
• Building and maintaining effective relationships with clients, recognizing, and developing potential business opportunities.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• A Bachelor’s Degree in Mechanical Engineering, with minimally 3 to 4 years of relevant experience in Buildings Mechanical Design.
• Strong project management skills with ability to lead project team members on technical delivery. Excellent presentation, verbal, and written communication skills.
• Sufficient experience to demonstrate intermediate to advanced knowledge of relevant engineering codes, standards, and practices.
• Organised approach and ability to accept increased responsibility and produce accurate and detailed work.
• High level of computer literacy and exposure to BIM / Revit will be highly desired, with advanced problem-solving skills through investigation and analysis.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you. To find out what your key attribute is, take the test here.

We value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 7,000+ experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Our client, one of Asia-Pacific’s leading organizations is looking for:

Test Engineer

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including test planning, analyzing business and system requirements.

Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Preparing the test environment, executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.

Requirements:

• Bachelor's Degree in Information Technology or Engineering
• At least 3 years’ relevant experience in executing testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity on the full system development lifecycle from requirement, development, to testing and deployment.
• Good written and verbal communication skills.
• Able to work well both independently as well as in a team.
• Certification in software testing preferred.
• Experience in Micro-payments/Automatic Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage.

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Engineer”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Jagveer Singh Arora
EA Personnel Registration Number: R22109615

• Oversee the setup, upkeep, and management of servers, networks, and cloud infrastructure.
• Design, implement, migrate, troubleshoot, and maintain IT network infrastructure, focusing on backup, security, redundancy, and disaster recovery.
• Analyze and validate network architecture through usability testing, providing recommendations for upgrades.
• Monitor and report on network performance and status to key stakeholders.
• Plan and manage the deployment and maintenance of end-user computing devices.
• Coordinate and execute tasks for IT operations projects.
• Support the implementation of ISO27001 information security measures and associated security systems.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in digital infrastructure architecture, network design, and cybersecurity strategy.
• Proficiency in cloud platforms, network monitoring tools, and cybersecurity frameworks.
• Strong analytical skills and the ability to communicate complex technical concepts to non-technical stakeholders.

To apply, please visit www.gmprecruit.com and search for Job Reference:

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

To assist in the daily production operation, ensuring schedules of customer is met.

Create and develop quality reports based on drawings

Maintain measuring instruments calibration list.

Liaising with customers and suppliers

Fresh graduates are welcome to apply

Willing to learn and explore

Friendly environment

Engineering graduates prefer but open to others Diploma/ITE also

Versatile to different roles in the company

Basic salary: $3,200 - $4,500

Working hours: 8.30am to 6pm, 5 days work week

Location: Serangoon

Job Description

● Technical transfer product/project in assembly and testing, and from customers

● Provide technical support in manufacturing and testing in product build

● Provide technical support to QC in RMA issue

● Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

● Minimum Diploma in Electronics Engineering

● At least 2 years of relevant work experience in Electronics Manufacturing industry

● Technical competent to handle product/project manufacturing, transfers and troubleshooting

● Experience in product/project, PCBA manufacturing and testing

● Able to liaise with customer on technical matters

● Experience in manufacturing environment with ISO13485 & FDA preferred

● Good communication and problem-solving skills

● Medical product experience and Quality Management System exposure preferred

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Position Overview:

In this role, you will be responsible for developing cutting-edge deep learning-based perception algorithms and advancing the state-of-the-art in computer vision. Your expertise in algorithm development and optimization will contribute to our mission of delivering innovative solutions in the field of AI perception.

Responsibilities:

• Design and implement advanced algorithms for various vision tasks, including object detection, lane detection, segmentation, and depth estimation. Enhance the accuracy and robustness of our perception systems.
• Continuously explore the latest advancements in computer vision literature. Bring innovative ideas to the team and contribute to the evolution of our perception algorithms.
• Contribute to our intellectual property portfolio by publishing patents and research papers. Share findings and insights with the scientific community to establish our leadership in AI perception.

Qualification/ Requirements:

• Bachelor's or Master's in Computer Science, Machine Learning, Electrical Engineering, or a related field.
• Research and development experience in one or more of the following areas:

- Strong programming skills with C/C++, with demonstrated delivery of robust, well-tested C++ software

- Experience in deploying AI models on a real-time system

- Strong written and verbal communication skills, to collaborate with stakeholders of various backgrounds

- Object detection and tracking.

- Strong analytical abilities to quickly grasp concepts and design solutions

- Multi-view geometry and 3D computer vision.

• Good understanding of M&E infrastructure.
• Supervise preventive maintenance activities and ad-hoc works orders on mechanical, electrical, and other installed M&E systems and ensure timely and quality work.
• Experience working in critical M&E facilities or experience in ACMV, electrical or fire systems will be an advantage.
• Able to carry out impact assessment during system fault and technically sound to contain fault to ensure M&E system service continuity.
• Ensure proper escalation in accordance with incident escalation process.
• Carry out work in accordance with site processes and requirements.
• Proactively look out for site abnormalities and possible areas of improvement, recommend solutions and put-up proposal to Supervisor.
• Able to review SOPs, MOPs and EOPs.
• General facilities duties, including monitoring of equipment and report on daily condition.
• Occasionally perform simple repair work such as lamp replacement or door repair.
• Any other duties assigned by Site Supervisor / Engineer Lead.

• Flexible with 24x7 rotating shifts.
• Experience in data centres facilities management will be an added advantage

1. Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc
2. Programing experience in Java
3. Familiarity with Linux operating system and commands
4. Capability to troubleshoot integration issues efficiently
5. Handling a broad range of software and other programming tasks to ensure that their systems integrations are functional.
6. Six months contract (extendable)

1.1. Broad Functions:

As part of the technical services team, the Chemist is responsible for managing and control of the lab polymerization facilities. They need to design, optimizing for creating polymer materials and support the production processes such as scale up, trouble shooting and improvement.

1.2. Job Description / Responsibilities:

1.2.1. Development

1.2.1.1. Design and synthesize new polymers with desired properties for various applications.
1.2.1.2. Conduct experiments to understand the relationship between polymer structure and its physical and chemical characteristics.
1.2.1.3. Analyse and interpret data from various techniques like spectroscopy, chromatography, and thermal analysis to characterize polymers.

1.2.2. Polymer Production and Processing

1.2.2.1. Develop and optimize production processes with productivity and cost effectiveness.
1.2.2.2. Troubleshooting issues arising during mass production and suggest solutions.
1.2.2.3. Collaborate with related department to ensure smooth integration of new polymers into existing production lines.

1.2.3. Material Characterization and Testing

1.2.3.1. Perform various tests to evaluate the mechanical, thermal, electrical, and other properties of polymers.
1.2.3.2. From the test results to make a judgement the suitability of polymers for specific application.
1.2.3.3. Proceed with modification to polymer formulation based on performance needs.

1.2.4. Communication and collaboration

1.2.4.1. Document research findings and experimental procedures in clear and concise report.
1.2.4.2. Present research results to colleagues, management, or external audiences.
1.2.4.3. Collaborate effectively with related parties to achieve project goals and to resolve issues.
1.2.4.4. Support training new products/process modification for related parties.
1.2.4.5. Train basic knowledge in lab for new staff

1.2.5. Laboratory Management

1.2.5.1. Safe operation and up-keep 5S of laboratory.
1.2.5.2. Training of new lab staff.
1.2.5.3. Lab work planning and scheduling.
1.2.5.4. Equipment & spare parts management.
1.2.5.5. Maintain chemical inventory.

1.2.6. Others

1.2.6.1. Perform any other tasks assigned by the manager

1.3. Requirements:

1.3.1. Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
1.3.2. Fresh graduate - Junior Chemist
1.3.3. At least 3 years of relevant working experience – Chemist
1.3.4. Understand the hazardous of materials from SDS + Singapore regulation and judge an appropriate instruct.
1.3.5. Basic knowledge and practical experience for chemical experiments.
1.3.6. In depth knowledge of polymerization mechanism and kinetics.
1.3.7. Expertise in polymer characterization evaluation techniques.
1.3.8. Operate spectroscopy, chromatography and thermal analysis.
1.3.9. Ability to interpret and analyse data.
1.3.10. Excellent written and verbal communication skills.
1.3.11. Ability to collaborate effectively with colleagues.
1.3.12. Understanding of relevant safety regulations and best practices.
1.3.13. Project management skills.
1.3.14. Intermediate MS Office skills
1.3.15. Self-disciplined as a role model for employees.
1.3.16. Meticulous in handling complex work.
1.3.17. A resourceful problem solver.
1.3.18. A person with high degree of integrity and patient.
1.3.19. Understand the Japanese culture to support working with Japanese colleagues. (Preferred)

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)
1.4.2. Commence work: ASAP.
1.4.3. Applicants can work in Singapore without requiring a work pass.
1.4.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

We are seeking a passionate and innovative AWS Cloud Engineer to join our team. In this role, you will

be responsible for migrating on-premises applications to AWS infrastructure using Infrastructure as

Code (Terraform). You'll collaborate closely with application and data teams to ensure they have a solid,

scalable platform for deploying their solutions. If you thrive in a collaborative and supportive

environment and have a desire to continually learn while building cutting-edge cloud solutions, we want

to hear from you!

Key Responsibilities

Cloud Infrastructure & Operations:

1. Implement robust solutions on AWS using services like EC2, Lambda, VPC, S3, RDS, and

Document DB.

2. Manage infrastructure changes via IaC (Terraform), ensuring scalable environments with EC2,

ALB, NLB, EBS, and EFS.

3. Migrate workloads to AWS, ensuring seamless transitions.

4. Automate deployments and data resilience using Python, shell scripting, and AWS SSM

5. Implement monitoring, alerting, and security with CloudWatch, SNS, CloudFront, and WAF.

6. Automate deployments, data resilience, and system administration using Python, shell scripting,

Bash, and PowerShell.

7. Administer Linux and Windows environments, ensuring optimal performance and security.

8. Support incident management and participate in the on-call rotation.

Collaboration & Continuous Improvement:

1. Work with clients and internal teams to understand requirements and deliver customized AWS

solutions.

2. Collaborate on CI/CD pipelines with tools like GitHub, Terraform, Jenkins, and AWS services.

3. Maintain comprehensive documentation and stay updated with industry trends.

4. Collaborate in an agile environment to deliver high-quality work.

What we are looking for

Requirements:

· 5 to 10 years of experience with core AWS services, such as IAM, networking, security, and

operations.

· Experience with infrastructure-as-code tools, such as Terraform, and a clear understanding of

infrastructure pipeline concepts.

· Solid understanding and experience building systems using AWS compute services, such as

EC2, and serverless platforms like AWS Lambda.

· Proficiency in at least one programming language, such as Bash, Python with additional

expertise in Linux administration, Windows, and shell scripting.

· Strong understanding of both relational databases (e.g., PostgreSQL, MySQL) and NoSQL

databases (e.g., Document DB, Mongo DB).

· Experience implementing AWS database solutions, such as RDS, DynamoDB, or Aurora.

· Familiarity with network protocols and IP networking, along with experience in network

troubleshooting.

· Strong understanding of security best practices and a commitment to integrating them into daily

tasks and projects.

· Excellent problem-solving skills and the ability to work under pressure to troubleshoot and

resolve complex issues.

· Excellent communication skills, with excellent spoken and written English, for effective collaboration with cross-functional teams.

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Position title : Business Central M365 Technical Consultant
Location: West
Working Days: 5 days
Working hours : 9am-6pm
Salary : $5,000 - $8,000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Roles & Responsibilities

• Collaborate with functional consultants to develop add-on solutions for customers.
• Develop programs in Dynamics NAV and Dynamics 365 Business Central (on-premise or online).
• Participate in business requirement study.
• Develop Power BI Report and Dashboard.
• Develop Apps for Business Central using Power App.
• Manage & review team of outsource employees’ projects

Requirements:

• Skill in NAV C/AL, Business Central AL, JSON, .Net programming.
• Business Central Reports design.
• Webservices & API programming.
• Possess minimum a Diploma / Degree in IT.
• Minimum 5 years of relevant working experience.

Our client provides technical and commercial management solutions.

• Responsible for the daily operation of the number of vessels assigned.
• Plan, manage, monitor and execute vessels repairs, dry dockings and conversions within given budgets.
• Check vessels performance trend and take necessary remedial actions to optimize vessel’s operations.
• Keep strict cost control of the Annual Operating Budget for each of the assigned vessels.

Requirements:

• Marine Engineer Class 1 (Chief Engineer Unlimited) Certificate.
• At least 5 years of tanker operations and sea going experience as a Chief Engineer in LPG/Oil Tankers.
• Good understanding of maritime safety regulations and compliance standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client provides technical and commercial management solutions.

• Responsible for the daily operation of the number of vessels assigned.
• Plan, manage, monitor and execute vessels repairs, dry dockings and conversions within given budgets.
• Check vessels performance trend and take necessary remedial actions to optimize vessel’s operations.
• Keep strict cost control of the Annual Operating Budget for each of the assigned vessels.

Requirements:

• Marine Engineer Class 1 (Chief Engineer Unlimited) Certificate.
• At least 5 years of tanker operations and sea going experience as a Chief Engineer in LPG/Oil Tankers.
• Good understanding of maritime safety regulations and compliance standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Location: Penjuru Lane

Salary: $2,800 - $3,500

Working days: Monday - Friday

Working hours: 8:30am – 5.30pm

Responsibilities:

• To assist in the overall management and technical operations of the Marine Fleet that includes the preparation, review and management of all technical documentation, vessel certificates, maintenance records, compliance records etc.
• Providing the necessary administrative support and coordination for any vessel inspections, repairs and docking works.
• Assist in liaising with customers on technical and operational matters that inclusive of vessel performance, etc
• Attending to vessel docking, repairs and surveys when requires and carry out supervision on any contractors' repair / maintenance works on board the vessel.
• Monitoring the technical status of vessel in term of Class certificates and surveys and ensure that all statutory certificates, equipment certificates, etc, are properly maintained, documented and up to date.
• To identify and source for technical and operational supplies required for the vessel's need. Coordinate with the suppliers for timely delivery to the vessels.
• Monitoring and controlling of the vessels consumables to prevent unnecessary wastage.
• To keep track of the vessels LSA, FFA, cargo hoses registry, lifting gears registry and PPE of all shipboard personnel.
• Appointed as safety committee member to carry out tool-box meetings for all the vessels and attend to vessel inspections.
• To work closely with the HES team to ensure smooth implementation and compliance of company's safety and quality standards
• To assist in investigating any defects / failures occurred and reporting all vessels incidents, near misses to prevent and eliminate any potential incidents
• To assist in maintaining crew records that inclusive of certificates, training, medical checks and coordinating in crew changes.
• To undertake any other technical related tasks and assignments as and when required.

Job Requirements:

• Relevant working experience
• Proficiency in Microsoft Office

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

The role of a Technical Delivery Manager (TDM) is to lead, guide and manage the technical aspects of projects through design, build and implementation phases. They are responsible for ensuring the successful delivery of technology projects by collaborating with cross-functional teams, managing project timelines, and overseeing the development process. TDMs play a crucial role in bridging the gap between business requirements and technical solutions, making them instrumental in driving digital transformation initiatives within organizations.

Overall Responsibilities:

• Manage the end-to-end technical delivery of large IT projects, including scope, cost, quality, and time management; stakeholder communications; risk, issue, and dependency management; and project reporting and governance.

• Develop and maintain project plans, status reports, and other project-related documentation to ensure effective communication among stakeholders and project team members.

• Lead and mentor a team of developers, providing guidance and support throughout the project lifecycle.

• Collaborate with cross-functional teams, including business analysts, project managers, and other stakeholders, to ensure alignment and effective communication.

• Identify and mitigate risks and issues related to technical deliverables, proactively resolving any roadblocks to ensure project success.

• Ensure adherence to coding standards, best practices, and security guidelines across all development activities.

• Provide regular updates on project progress, highlighting key milestones, risks, and issues to relevant stakeholders.

• Contribute to the continuous improvement of development processes and methodologies.

• Conduct code reviews and provide constructive feedback to team members to ensure high-quality deliverables.

1. Project Delivery Management

a. Plan technical deliverables (including any system enhancements and upgrades) to meet Project’s requirements within allocated budget

b. Manage and coordinate across different application teams to manage technical dependencies of the solution

c. Monitor and manage risks/issues related to technical delivery

d. Provide status update related to technical delivery

e. Report to Program and/or Project Manager for the strategic program

2. Requirements Management

a. Partner with SA & subject matter experts to understand and implement functional and technical requirements

b. Provide systems input to specification phase (e.g., effort estimates, high-level delivery plan) based on impact assessment (e.g., function points)

3. Design & Development

a. Partner with Domain Architects, Dev. Manager, and Security Architect to ensure solution design complies with enterprise design principles, security and control standards

b. Partner with Development Manager in managing application teams to build the enhancements

4. Test Management

a. Partner with Test Manager to ensure completion of SIT, UAT testing, performance/load testing and application security testing with quality results

b. Work with GIS to facilitate completion of penetration testing and remediation of findings in accordance with Mitigation Plan

c. Work with GIPS on Infra requirements.

5. Implementation Management

a. Prepare technical implementation plan across application teams

b. Coordinate technical implementation activities across application teams to ensure production cutover and adequate post-implementation support

Key Skills:

• Experience with managing end to end implementation of projects.

• Experience with managing and working with external vendors/teams.

• Database (Ability to use and understand for the purpose of analysis and design and investigation)

• Analyse Requirements and form solutions for the application.

Technical Superintendent

Salary: $8,000 to $11,000

Working Hours: 5 days, 9.30am to 5.30pm

Working Location: Alexandra Point / Fujairah Branch Office (Rotation travel)

The company owns and manages a fleet of coastal tankers and barges operating in Singapore, Malaysia and in the South East Asia region. We are seeking for qualified candidates to take up the challenges of Technical Superintendent based in Singapore and on rotation shift in Fujairah.

Responsibilities:

• Maintain vessels to the requirement of Classification Society, Flag state, Port State, Oil majors and state regulations that the vessels are plying.
• Execute planned maintenance system and ensure compliance.
• Approve and monitor repairs, prepare purchase order and works order.
• Prepare dry-docking / repair specifications and monitor work progress.
• Maintain vessel allocated budget and meet operational standard as required by Owners.
• Carry out internal audits, risk assessment, incident investigation and closing out report.
• Attend to all inspections by Class Society, Flag State, Port State, Underwriters and Oil Majors.
• Liaise with Terminal Representative, Charterers, Agents, Operators and Fujairah Freezone Official.
• At the Fujairah branch office, to be the first point of contact for vessel matters.
• Assist Crew Department in coordinating crew matters.

Requirements:

• COC Class 1 or 2 holders with sailing experience on product tankers
• Minimum 3 to 5 years’ experience ashore as a Technical Superintendent in tanker companies
• Experience in handling Foreign going vessel
• Must be willing to travel abroad (Fujairah) on a rotational basis
• Familiar with Oil Majors vetting’s and inspections requirements

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

M&E RTO (Healthcare Project)

Job Requirement

Education: Minimum Diploma in the Engineering (M&E) discipline or equivalent

Accredited by IES/ACES and with valid RTO Certification

Position Level: Senior Executive

Minimum Experience: 5 Years

Employment Type: Contract

Estimated Contract Period: 30 Months (estimated start from the mid of Feb 2025)

Working hours: Mondays to Fridays: 8.30 am to 6 pm (with 1 hour of lunch break)

Job Description

1) To represent the Qualified Person (QP) on-site to supervise the works following local legislation and authority regulations.

2) To supervise the execution of the works and maintain quality control and ensure that the works are carried out following the contract specifications, drawings, all other contract documents, site instructions.

3) To assist the QP in all aspects relating to the construction of the projects, keeping and reviewing the record of works progress, materials, equipment at the site, variation works, tests reports, inspections, provisional quantities, dayworks, etc, monitoring schedules, observe and comply with site safety of contractors, and submitting all reports to the QP. Attend all site, progress, variation, and coordination meetings and keep proper minutes of these meetings relating to the projects and other duties as directed by the QP from time to time

4) To check shop drawings, samples, etc submitted by contractors.

5) To provide full support and assistance to the QP in ensuring that their instructions are communicated effectively, and works are being carried out following instructions from time to time.

6) To assist the QP in the review of the contractor’s proposed method statement and working procedure and to verify that they are properly executed on site.

7) To assist the QP in verifying the works done and variations claimed by contractors in their request for progress payments.

8) To verify all reports and claims submitted by contractors.

9) To check all drawings and specifications for discrepancies and report to the QP.

10) To ensure that works are carried out safely and properly inspect completed works and report on defects.

11) To assist the QP in preparing site instructions for contractors as well as a list of defects of any completed works. To avoid doubt, he shall not issue instructions involving cost or time to Contractors.

12) To check the quality of materials delivered to the site and report to QP any materials that do not conform to the specifications.

13) To monitor the progress of rectification works and ensure all defects are satisfactorily rectified.

14) To inspect and assist with handing/taking over completed works.

15) To assist the QP in ensuring full documentation of warranties and test reports are being submitted.

16) To verify all as-built drawings submitted by contractors against actual works done on-site and ensure

contractors rectify all discrepancies in the submitted as-built drawings. He shall ensure a complete and correct set of as-built drawings for the projects is handed over to the QP.

17) To prepare daily reports, and any presentation slides for all the projects whenever required.

18) assist QP on the tender site show round events for all the related contracts whenever required.

19) To prepare weekly reports on the status and progress of the project. The report shall comprise clear photos of M&E services installation, testing reports, etc.

Looking forward for your application.