The Resident Technical Officer shall be directly responsible to the Consultant (Architect) / Project PM for the duration of the construction of the Works.

Shall assist in the supervision of the construction of the Structural Works under the Building Control Act and to render all assistance as may be required by the Consultant (Civil & Structural Engineer) and the Consultant (Mechanical & Electrical Engineer). For HDB Project Civil & Structural / Architectural Works:

Diploma in Civil Engineering or Structural Engineering or equivalent.

Registered RTO accredited by the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES).

Preferred applicants with Certificate in Building Construction Safety Supervisors Course.

Ensure that building contractor embrace good construction practise to achieve good workmanship.

Minimum 5 years relevant experience in supervision of building projects in Singapore.

Must have HDB/ BTO projects with commercial buildings supervision experience.

Availability to commence work on short notice.

Able to work night shift and rotational Sunday duties.

DSTA & CAG project experience is preferred.

Technical Manager

Lead the technical management of our fleet, ensuring operational efficiency, safety, and compliance with regulatory requirements.

Key Responsibilities

• Lead technical superintendents during emergencies and critical situations.

• Manage technical aspects of fleet operations, including maintenance, repair, budgeting,

and surveys.

• Ensure vessels are technically operational and managed according to company

requirements.

• Foster a sense of ownership and accountability within the technical department.

• Oversee dry-docking, repair quotes, and shipyard selection.

• Source technical and operational supplies, ensuring economical rates.

• Perform evaluations, audits, and investigations to ensure technical compliance.

• Enhance safety practices within teams and ensure technical superintendents prioritize

safety.

• Collaborate with the HSE Management team to implement QHSE systems and policies.

• Ensure compliance with quality and safety management standards.

• Maintain vessels' zero loss time accident record and report incidents.

Requirements

• COC Class 1 with 5 years of experience in a similar capacity.

• Strong leadership, organizational, and communication skills.

• Independent, resourceful, and able to work under pressure.

• Analytical and proactive in technical trouble-shooting and problem-solving.

• Familiarity with ISM/ISPS.

• Ability to travel with short notice.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Project Location: Seletar Mall

Includes Night Shift work

Job Description:

• Assist the Job Manager to attend to technical and design issues at site and report issues to Job Manager.
• Provide standing supervision as and when directed by the Resident Engineer and/or Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in March 2025.

Requirements:

• A registered Resident Technical Officer with IES / ACES is an added advantage.
• Minimum 5 years’ experience as a Resident Technical Officer on local projects.
• Experience in Plumbing and Sanitary projects will be added advantage
• Experience in supervision of Mechanical Services installation for local Hospital/Healthcare/Commercial Developments would be added advantage
• Familiar with local codes and regulations
• Ability to respond to technical questions
• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution is an added advantage

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

We are seeking a dynamic and personable Technical Stylist to join our team. This role will require someone who has great interpersonal and communication skills, is highly detailed and meticulous. As a Technical Stylist, you will combine your garment expertise/problem solving skills with your love for people to deliver outstanding customer service.

Key Responsibilities:

1. Bridal Gown Fittings:
   • Assist brides during gown fittings, providing expert advice on fit, style, and alterations.
   • Ensure gowns are properly adjusted for comfort and appearance during appointments.
   • Collaborate with the alterations team to communicate fitting requirements and customizations.
2. Client Interaction:
   • Build rapport with brides and their families, creating a welcoming and fun environment.
   • Provide thoughtful and professional styling advice tailored to each bride’s preferences and body type.
   • Manage appointment schedules and follow up with clients to ensure a smooth fitting journey.
3. Garment Expertise:
   • Understand bridal fabrics, gown construction, and embellishments to provide expert recommendations.
   • Inspect gowns for quality and readiness before fittings.
   • Troubleshoot and suggest creative solutions for any fit or design challenges.
4. Customer Experience:
   • Maintain a high level of professionalism and positivity in all client interactions.
   • Handle questions, concerns, or special requests with tact and efficiency.
   • Ensure each client leaves with a memorable and delightful experience.

Requirements:

• Good understanding of garment construction, fabrics, and bridal fashion trends.
• Excellent communication and interpersonal skills.
• Outgoing, fun-loving personality with a natural flair for connecting with people.
• Passion for delivering exceptional customer service.
• Ability to work in a fast-paced, detail-oriented environment.
• Previous experience in bridal, fashion retail, or tailoring is a plus.
• Availability to work weekends and evenings as needed.

Why Join Us?

• Be part of a close-knit team passionate about creating joyful memories for brides.
• Work in a beautiful boutique environment surrounded by stunning gowns.
• Opportunities for professional growth and development within the luxury bridal industry.
• Competitive compensation and benefits package.

How to Apply: If you are enthusiastic, personable, and have a keen eye for detail, we would love to hear from you! Please send your resume and a cover letter with a paragraph detailing your relevant experience and why you’re a perfect fit for this role to [email protected]indicating SALES CO-ORDINATOR_NAME as the subject title.

1. Ensure all preventive and corrective maintenance works are carried out accordingly to prescribed checklist and schedule

2. Assign and lead Technician to breakdon / compliant promptly and troubleshoot and rectify within the required KPI

3. Feedback of major works to Engineer

4. To ensure work carry out safety and accordance with safety procedure

5. Handle project works as task

6. Any other task as and when required by Engineer / Management

Interested applicants please email a copy of your resume to [email protected]

Tele @jesswongie OR WA 96503173

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

This role involves implementing and maintaining CI/CD pipelines, managing cloud infrastructure, and providing operational support.

Responsibilities

• Implement and manage continuous integration and continuous deployment (CI/CD) pipelines to streamline software delivery.
• Utilize cloud platforms Azure, or GCP to manage and optimize cloud infrastructure.
• Automate deployment, monitoring, and infrastructure management tasks to improve efficiency and reliability.
• Continuously monitor system performance and reliability, responding to incidents as needed.
• Work closely with development teams to ensure smooth and reliable software releases.
• Ensure security best practices are followed across infrastructure and applications.
• Create and maintain detailed documentation of processes and procedures.

Skills Requirement

• Bachelor’s degree in Computer Science/Information Technology/Engineering/related field.
• 4-6 years of experience in a DevOps or as an SRE.
• Proficiency with cloud platforms (Azure, GCP).
• Strong scripting skills - Python, Bash, Shell.
• Deep understanding of CI/CD principles and tools (e.g., Jenkins, GitLab CI/CD).
• Experience with containerization and orchestration tools (Docker, Kubernetes).
• Knowledge of version control systems (e.g., Git).
• Familiarity with infrastructure as code (IaC) tools (e.g., Terraform, Ansible).
• Proficiency with monitoring tools like Prometheus, Grafana, and the ELK stack (Elasticsearch, Logstash, Kibana) to gain insights into system performance and reliability.
• Experience with managing and optimizing databases (SQL and NoSQL) to ensure data integrity and performance.
• Strong understanding of networking concepts, including DNS, load balancing, and network security. Knowledge of network configurations and service discovery tools (e.g., Consul, Envoy).
• Familiar with programming languages such as Go, Java, or Ruby.
• Experience with configuration management tools like Chef, Puppet, or SaltStack.
• Good in incident response and management, including root cause analysis and post-mortem documentation.
• Understanding of distributed computing and cloud-native applications.
• Excellent problem-solving and troubleshooting skills.

Job Descriptions:

• Work as Resident Technical Officer to our LTA projects, to assist and report to RE and SRE to monitor all site activities, and any incident, including near-misses. Report any non-complianceto RE and Qualified Person Supervision (QPS).
• Assist Engineer in carrying out supervision for related works include but not limited to replacement and extension, construction and reconfiguration of viaduct/ bridge works, and associated civil works, proposed new flexible pavement and infrastructure, re-alightment of roadways, fencing and construction.
• Prepare daily reports at regular basic and as required by clients.
• Supervise all construction activities and ensure compliance to all plans/drawings, risk assessment and specifications.
• Willing to work on rotation shifts .
• Ensure compliance to all health and safety policies.
• Ensure that contractor and their subcontractor comply with client's safety requirement, and safety checklists are follow.
• Reject poor quality of works at site and inform RE to raise non-conformance notice.
• Assist RE to manage and maintain records and documentation on field or site changes and to monitor adherence to construction schedule.
• Carry out standing supervision for critical site activities based,
• Stationed fulltime on site, 44 hrs weekly. For RTO Tunnel: 56 hrs weekly.

Working Areas:

Full time at sites: Sin Ming Area; Tampinese North; and Serangoon North, Bright Hill MRT.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

In this role you will provide technical accounting guidance on the Company’s complex and non-standard transactions.

Your Job:

• Review of contracts and proposal for both revenue and non-revenue transactions and provide accounting guidance;
• Preparation of documentation and memos supporting the Company’s accounting positions and addressing audit questions.
• Partner with business to ensure documentation required for financial audit and or internal controls compliance is prepared and retained.
• Support execution of monthly financial statement close processes, and support SEC reporting team on policy disclosures on a need basis.
• Execute and document internal controls around applicable financial statement close processes (e.g. contract review)
• Assisting with other accounting projects as required

Required Qualifications:

• Bachelor of Accountancy (or equivalent)
• Min 7 years of public accounting or corporate experience required
• Ability to apply technical accounting guidance to transaction fact pattern to arrive at recommended accounting position
• Excellent written and oral communication skills.
• Good problem solving and (accounting) investigative skills

Preferred Qualifications:

• Chartered Accountant / CPA (preferred)

• Reputable MNC company
• LTA Projects
• Alternate 6 Days

Responsibilities:

• Inspection and supervision of Archi work, including but not limited to ALC wall & drywall, off-site precast toilet units, off-site precast façade panels factory, epoxy flooring, vinyl flooring, carpet flooring, plastering, painting, raised floor system, ceiling, screeding, tiling, waterproofing, room handover, defects, auto-door testing, lift interior, & resolving conflicts between Architectural, Structural & M&E works.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

Requirements:

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.
• Able to work alt sat work week.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Technical Manager (Electrical)

• Working Day: 5.5Days | 8.30am to 5.30pm (Mon – Fri), 8.30am to 12.30pm (Sat)
• Project Location: East, at Changi area
  Salary: $6,000 - $9,500

Requirements

• Degree in Electrical Engineering or any other relevant field with relevant design working experience
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore

Responsibilities

• Develop and implement successful design strategies and implement them for the project
• Ensuring that the multi-disciplinary teams building the project work together smoothly and that everything is delivered on time and within budget
• Overseeing the design process using technical expertise
• Advising on the selection of materials used and other aspects of procurement
• Working with clients to ensure that their expectations are met
• Reviewing designs with health and safety in mind
• Ensuring strict compliance of the design in accordance with contractual requirements and Singapore standards.
• Maintaining thorough documentation of the design process
• Managing processes relating to the project’s design to ensure that everything is delivered to schedule and budget
• Keeping up to date with changing building legislation and codes of practice relating to design
• Prepare and submit Single-Line Diagrams (SLD) and Drawings for FAT.

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents, and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Consultant / Qualified Person as stated below:
• Check shop drawings submitted by contractor.
• Check as-built drawings and Operation & Maintenance Manual submitted by contractor.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.

Qualifications

• Possess Diploma in Civil Engineering.
• Registered Resident Technical Officer with IES / ACES.
• Minimum 3 years’ experience as RTO in supervision of works similar in nature to major construction works in buildings, civil, HDB carpark.

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Technical Writer with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Regulatory Documentation
• Standard Operating Procedures (SOPs)
• Clinical Trial Documentation
• Technical Reports and Writing
• Quality Control and Documentation Review
• Cross-Functional Collaboration
• Research and Data Interpretation
• Training Materials Development
• Documentation for Internal and External Audits
• Risk and Compliance Management
• Technical Assistance and Consultation

Qualifications:

• Graduate of Bachelor of Science in Pharmacy or any related field
• Proficient in English
• Previously working as a technical writer in pharmaceutical company/Life Science is highly advantageous.

This role is for 6 months contract and may be extended if performance is satisfactory.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Technical Superintendent x2

Summary:

The Technical Superintendent is responsible for technical operations of the assigned oil tankers.

Reports to: Vessel Manager / Technical Manager

Responsibilities:

• Ensuring vessels meet technical standards and performance requirements

• Maintaining up-to-date certificates and documents

• Implementing planned maintenance systems

• Managing surveys, dry-dockings, and repairs

• Reviewing and promoting crew performance

• Managing technical budgets

Requirements:

• Tanker seagoing experience as a Chief Engineer or Second Engineer (at least COC Class

2 or 3), or at least 2 years of experience as technical superintendent for oil tankers and

bunker tankers.

• Strong sense of integrity and professionalism.

• Excellent leadership, teamwork, management and communication skills.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Description

• Managing the onsite delivering of software services, pre-sales, post-sales or service delivery support, installation and configuration for customer environments.
• The jobs solve various business systems, networking and applications problems for standard industry servers, specialized or complex clustered environments.
• Deliver reactive and proactive activities according to Service Level Agreement to ensure customer satisfaction and loyalty.
• Provides direct post-sales systems on site technical support for reactive and proactive customers.
• Each position maintains a high level of customer satisfaction by ensuring clear business and technical solution alignment, clarifying customer needs and ensuring that they are met.
• Responsible for Customer Experience as well as the revenue growth, profitability, and account retention.
• Applies developed subject matter knowledge to solve common and complex business issues within established guidelines and recommends appropriate alternatives.
• Works on problems/ projects of diverse complexity and scope.
• Exercises independent judgment within generally defined policies and practices to identify and select a solution.
• May act as a team or project leader providing direction to team activities and facilitates information validation and team decision-making process.
• Ability to handle most unique situations.

Responsibilities:
1. Customer Service:

• Ensure a high level of customer satisfaction by delivering excellent support services.
• Act as a point of contact for escalated customer inquiries, maintaining a professional and customer-focused approach.
• Build and maintain excellent relationships with end-users, understanding their technical needs and preferences.
• Gather feedback from users to identify areas for improvement and implement solutions to enhance the overall user experience.
• Conduct user training sessions to promote self-service options and empower users to resolve common issues independently.

2. Technical Support:

• Identification and resolution of hardware and software issues for end-users, both onsite and remote.
• Serve as an escalation point for complex technical problems, ensuring timely and effective solutions.
• Collaborate with other IT teams within the organization (Infra, Network and App) to address and resolve technical issues.
• Oversee the development and maintenance of standardized laptop images for various user profiles.
• Deployment of laptops to new and existing users ensuring consistency, security, and compliance with organizational standards.
• Design and implement efficient processes for onboarding new employees, including laptop setup, account provisioning, and orientation on IT policies.
• Streamline and execute offboarding procedures, ensuring secure data removal, account deactivation, and retrieval of IT assets.
• Ability to analyze issues related to Microsoft 365 applications.
• Having knowledge to troubleshoot Wi-Fi or Network related issues.
• Possess expertise in diagnosing and resolving printer-related issues, including hardware malfunctions, connectivity problems, and print queue management.
• Develop and implement preventive and corrective maintenance strategies to optimize printer performance and minimize disruptions.
• Collaborate with vendors for escalated printer issues, warranty claims, and hardware replacements.

3. Documentation and Reporting:

• Maintain accurate records of support activities, including incident reports, service requests, and resolutions.
• Generate and analyse performance reports to identify trends and areas for improvement.

Qualifications:

• Bachelor’s degree in information technology, Computer Science, or related field (or equivalent work experience).
• Proven experience in a technical support role, with a minimum of 3 years in a leadership or supervisory position.
• Excellent knowledge of desktop operating systems, hardware, and software applications.
• Excellent troubleshooting and problem-solving skills.
• Effective communication and interpersonal skills.
• IT certifications (e.g., CompTIA A+, Microsoft Certified Desktop Support Technician, ITIL V4) are desirable.
• Solid understanding of ITIL framework and best practices for IT service management

Technical Manager - Electrical

Working Day: 5.5Days | 8.30am to 5.30pm (Mon – Fri), 8.30am to 12.30pm (Sat)
Project Location: East
Salary: $6,000 - $9,500

Requirements

• Degree in Electrical Engineering or any other relevant field with relevant design working experience
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore

Responsibilities

• Develop and implement successful design strategies and implement them for the project
• Ensuring that the multi-disciplinary teams building the project work together smoothly and that everything is delivered on time and within budget
• Overseeing the design process using technical expertise
• Advising on the selection of materials used and other aspects of procurement
• Working with clients to ensure that their expectations are met
• Reviewing designs with health and safety in mind
• Ensuring strict compliance of the design in accordance with contractual requirements and Singapore standards.
• Maintaining thorough documentation of the design process
• Managing processes relating to the project’s design to ensure that everything is delivered to schedule and budget
• Keeping up to date with changing building legislation and codes of practice relating to design
• Prepare and submit Single-Line Diagrams (SLD) and Drawings for FAT.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Technician (Assembly/AutoCAD/Technical Drawing)

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Diploma in Mechanical, Mechatronics Engineering or its equivalent
• Able to comprehend schematic/Technical drawing
• Experience in Orbital Welding and/or gas tungsten arc welding (GTAW), is an advantage.
• Able to commit rotating shifts

Interested applicants please submit your resume to [email protected]

We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,. The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Responsibilities:

• Design, develop, and maintain MS SQL databases, ensuring efficient data storage and retrieval. Perform database optimization, query tuning, and management of large-scale data sets.
• Develop and maintain PowerShell scripts to automate repetitive tasks, system monitoring, and report generation. Ensure smooth integration between different systems and platforms.
• Write high-performance, maintainable, and scalable code using C++.
• Develop scripts for managing and automating server tasks, ensuring reliability and optimal performance of systems.
• Design and implement RESTful APIs, ensuring seamless communication between services and applications. Develop efficient and scalable solutions in line with modern development standards.
• Troubleshoot and debug complex technical issues, identifying and applying solutions timely.
• Maintain clear and up-to-date documentation for all developed systems, scripts, and APIs.

Requirements:

• Min 5+ Years of experience of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.

ONSITE JOB PROFILE

a) Support the client in production / industrial engineering activities throughout the product realization activity

b) Study the Project requirements

c) Study the Concept design, development and production support of “tooling equipment” like Jigs and fixtures by employing ‘Computer Aided Design’ (CAD), for all components

d) Understand the Feasibility evaluation and testing of the tooling equipment

e) Prepare“3D CAD models” for the components in confirmation with the client’s standard operating procedures and practices for each production process.

f) Coordination of ECO (Engineering Change Orders) activity as per manufacturing customer’s standards and procedures through the use of SAP tools.

g) understanding and familiarization of the customer’s product and process requirements and training the delivery support team accordingly..

REQUIRMENTS TO PERFORM THE JOB DUTIES

h) Bachelor of Engineering / Technology (B.E. / B. Tech: equivalent to BS/ Diploma) in Mechanical Engineering.

i) 2-4 years of experience in CAD and ECO coordination.

j) Knowledge of Solidworks software is required.

k) Desire for continuous education and training effort.

l) Excellent written and verbal communication skills and ability to interact with all levels within engineering organization.

• Create Mechanical or Electrical schematic and detailed designs with computer-aided design (CAD) and Revit BIM MEP software
• Mechanical or Electrical Design layout plans
• Understand and review Mechanical or electrical building requirements along with the engineering team
• Identify potential operational issues and redesign MEP design to improve functionality
• Ensure final Mechanical or Electrical designs comply with builidng regulations and quality standards

Role:

• Generate Technical Proposals to support the Sales Team.
• Serve as the primary contact for customers regarding product queries, orders, and deliveries, and provide administrative support for the Sales Team.
• Oversee the sales order process, including purchase orders, invoices, and issuing sales transaction orders.
• Verify customer orders, including customer details and payment information.
• Respond to customer inquiries, feedback, or complaints via phone or email.
• Ensure quotes align with raised orders, confirming correct pricing, terms, and conditions.
• Record data and maintain systems as outlined in the sales process SOP and as directed by the Sales Team.
• Perform any ad-hoc tasks as required.

Requirements:

• Minimum of 2 years of relevant experience in the Engine and Propulsions Systems or related industry in administration or technical service support.
• Goal-oriented and meticulous in providing accurate information.
• Capable of working independently and as part of a team.
• Able to handle pressure and thrive in a fast-paced environment.

Job Summary

Responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role.

Responsibilities

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements

• Degree / Diploma in engineering discipline
• Minimum 1 year experience in sales liaising for OEM Semiconductor industry
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred
• Ability to troubleshoot electronics hardware system is an added advantage
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Good analytical skill

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 24883

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Resident Technical Officer (M&E)

Responsibilities:

-Inspection and supervision of M&E works as required under the project and mandated under the Building Control Act & Regulations.

-Inspect and conduct all required tests for the project.

-Preparation & issuance of site memos on bad workmanship & non-compliant works.

-As-built drawings checks.

-Monitor progress of the works on site and at any off-site manufacturing facilities and report delays immediately.

-Observe and comply with site safety, submit all reports as directed, and ensure that works are carried out in a safe and proper manner

-Attend and witness all on-site testing of architectural works as required by the Client and authorities.

-Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.

-Inspect the completed works and record all defects for rectification before handing them over to the Client.

-Others duties and responsibilities listed in project's contract.

Job Requirements:

-Candidate must be registered with BCA/IES as Resident Technical Officer

-M&E RTO shall be accredited with the Joint Accreditation Committee of the Institute of Engineers Singapore and the Association of Consulting Engineers.

-At least 3 Year(s) of working experience in the related field is required for this position.

-Required Skill(s): Supervision of M&E, building and construction works.

-Must attain certification in "BCSS" and "Develop a Risk Management Implementation Plan (bizSAFE Level 2)".

-Preferably Executive specialized in Engineering - M&E or equivalent.

-Good communication skills

Job Description

• Carry out full time supervision for construction of structural works in accordance to BCA approved structural drawings in compliance to Building and Control Act and regulations
• Check that requirements of specifications in regards to materials and workmanship are complied with the project specifications by the Builders. Ensure high quality control for all civil and structural as well as architectural works to be carried . This includes sample tests for materials and workmanship etc
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect / Engineers for issuance of Architect’s Instruction or Architects' clarification
• Work under the direction of RE, PE and Architect for site organisation, allocation of duties and tasks and coordinate with Architect for M&E services and structural design that affects architectural and ID works.
• Participate in Client/Consultant's site meeting and technical meeting if required by RE
• Vet and signoff inspection forms and quality related issues including all dry-lays, trade demonstrations, method of statements, mock-ups, defects inspection and rectification follow-up to sign-off, M&E testing and commissioning, handover to client.
• Check architectural and ID works and intent of design details are followed. To notify Architect of any design intent conflicts and quality variations, illegal works.

What you will need:

• Registered with IES-ACES Joint accreditation Committee ( JAC ) as Resident Technical Officer with a minimum diploma in Civil Engineering or equivalent qualification
• At least 5 years or more relevant experience
• Experience in precast RC piling works and structural steel buildings are preferred
• Comfortable for Project Site at Tuas South