Responsibilities:

• Supervise that the ship is built according to specifications and approved plans
• Supervise that the ship is built for compliance with relevant IMO regulations, Rules and Regulations for the Classification and Regulations flag country
• Review technical and building specifications and plans for shipbuilding
• Quickly identify the cause of troubles that occurred during shipbuilding and establish proper solutions
• Take precautions to prevent troubles during shipbuilding
• Liaise and coordinate with various stakeholders, shipyard, designer, vendors, Classification society, and flag country for technical and procedural issues during shipbuilding
• Ensure quality, environment, health & safety requirements are met

Requirements:

• Master's degree in Naval Architecture and Ocean Engineering
• Minimum fifteen(15) years of experience in either of four(4) major IACS Classification Society, ABS, Class NK, DNV or LR
• Proficiency in plan approval for hull structure in new construction projects of merchant ships the length of which is more than 200 metres (more than ten(10) different designs)
• Experience in plan approval for Zero-emission related works, such as; Carbon Capture and Storage system and Alternative fuel
• Experience in design review for novel design of hull structures, such as; Unusual hull form, proportion and structural arrangement
• Experience in structural strength assessment for sloshing in large tanks, such as; Cargo tanks (GTT MK III membrane system) of LNG tanker
• Experience in management as a member of the leadership team of the Classification Society in any country.
• Good knowledge of Rules and Regulations for Classification of Ship, IMO International conventions and codes etc. with experience in the development and maintenance of the Rules
• Good knowledge of innovative technology in the marine industry, such as; Wind-Assisted Propulsion System
• Positive working attitude and ability to work in a fast-paced environment
• Positive troubleshooting/finding root cause during shipbuilding

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause, and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality,environment, health & safety requirements are met.

Requirements:

• Must have a Bachelor of Engineering in Marine Electronics and Mechanical Engineering, Graduated advanced Marine Technology Specialist Course or similar.
• Minimum 3 years of Engineering experience in an offshore wind farm, ROV, Trencher or offshore vessel projects.
• Expert knowledge of Trencher (power cable trenching machine)
• Expert knowledge of Work class ROV
• Expert knowledge of wind farm construction projects.
• Expert knowledge of seabed soil information especially.
• Good knowledge of cable laying equipment installed on cable laying vessels.
• Good knowledge of cable laying work using cable laying vessels.
• Can draw the model with 2D and 3D Auto CAD
• Positive working attitude and ability to work in a fast-paced environment.

Responsibilities:

• Confirm compliance with IMO, classification standards (ClassNK) and inspections (JG) stipulated by the Japanese government and comply with technical standards.
• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality accurately.
• Ship design drawings and technical specifications can be checked.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Able to prepare progress reports and report them to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 15 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Mechanical and or Electrical engineering
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Practical experience at a shipyard.
• Experience in reclamation works using TSHDs.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Good Knowledge of high- and low-voltage electricity.
• Well-versed in ship maintenance requirements.
• Good written and interpersonal skills.
• Positive working attitude and ability to work in a fast-paced environment.
• Excellent writing and high communication skills.

The Technical Designer is part of the design team from the beginning and assists in making sure the design intent from concept is carried out in the detailing stage. He/She will be supporting the designer in selection of materials and systems,further the design resolution of details, specification reviews and/or writing, local building code compliance and analysis of the same in the International Building Code as requested by the project/client/operator; ultimately responsibility is in the quality control review of project documents. The Technical Designer supports the preparation of detailed drawings and tender documents. The position has experience in design development, architectural CAD and Revit documentation and drafting, and detailing. The Technical Designer is highly organized and collaborative and contributes to project design and delivery, and client care.

RESPONSIBILITIES

• Assures efficient preparation of detailed drawings through schematic design and design development to tender documentation phase on assigned projects
• Interprets verbal and written directions from project leaders, coordination discussion with other consultants into professionally completed documents or products
• Completes working drawings, design sketches, presentation drawings, shop drawings, diagrams, schedules, and other computer-generated or drafted documents from prepared drawings as required by the project
• Provides architectural drafting support on all phases of a project
• Understands and applies technical standards to drafting assignments

QUALIFICATIONS

• Bachelor’s degree in Architecture
• Architectural license preferred
• Environmental accreditation preferred
• 10+ years of experience in small to mid-size architectural projects, including urban and resort hotels
• Proficiency in technical skills, including AutoCAD and Revit
• Knowledge of architectural detailing, building materials, building codes, and detail documentation
• Sketching skills required
• Ability to work on several projects simultaneously with multiple deadlines
• Ability to effectively work in a team environment
• Ability to work on multi-disciplinary projects in collaboration with landscape and interior designers as well as MEP and Structural engineers
• Excellent verbal, written, and graphic communication skills, as well as excellent organizational skills

Summary of the role

As a Technical Consulting Analyst, you will manage customer relationships, communicate complex Revenue Management and Dynamic Pricing concepts, and ensure customer satisfaction by solving problems and maintaining trust. You will develop business acumen in airline practices, train customers on best practices, and analyze data to provide insightful reports. Additionally, you will identify upsell opportunities, participate in pre-sales engagements, and contribute to internal and team growth by networking.

In this role you’ll / Your main responsibilities:

• Manage and deliver activities related to Revenue Management and Dynamic Pricing.
• Communicate complex concepts to various audiences.
• Anticipate and eliminate any roadblock to customer satisfaction and business adoption, identify and mitigate with your customer any risk on the project delivery, scope or timeline, articulate and justify accordingly the relevant alternatives and remedies.
• Maintain customer trust.
• Understand airline business practices and our capabilities, identify and implement best practices.
• Train customers on best practices.
• Understand and explain the methodology used in our solutions.
• Analyze and present large datasets to customers.
• Develop business adoption roadmaps.
• Identify upsell opportunities.
• Participate in pre-sales engagements.

About the ideal candidate

• Master’s or university degree in business management, engineering, or operations research.
• Experience in the airline industry (preferably in revenue management, pricing, network planning, or sales and marketing).
• Experience in information technology (preferably in travel and tourism).
• Skills in data science and visualization, and operations research.
• Curious and eager to learn.
• Passionate about the airline industry.
• Customer-centric.
• Accountable and results-driven.
• Flexible, open to changes, and proactive.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials.
• Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules. Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 10 years of engineering experience with a degree in Electronic and Control Systems Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Minimum 5 years of engineering experience overseas.
• Minimum 2 years’ experience of working onboard construction vessels related to “offshore wind farms” or “dredgers”.
• Experience in design and electrical diagrams by CAD or other software such as Electrical control diagram and Onboard equipment/vessel design modification
• Experience in method engineering and planning of ships and ship equipment such as Method for piling and WTG installation
• Experience in large dredging project sites.
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Good knowledge of underwater dredging/mining work.
• Good knowledge of marine engineering and vessel equipment.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams and Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Well-versed in ship maintenance requirements
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.

Senior Technical Executive

(Building Services, Defects Management/DLP, Enhancement Work, ETFV, Tenancy Services, Plumbing & Sanitary / Gas System, Security Services, Card Access Control (H/W), CCTV, Irrigation, Water Features, Fire Alarm & Protection)

JR108492

Duties:

• Support the Facilities Manager in daily Facilities Operations & Maintenance activities/issues. Manage taking over of the new construction and facilities.
• Record and report the defects in new installation and construction. Review and support the testing and commissioning of the new facilities. Manage critical Facilities System administration, performance monitoring & trending review (Building Management System)
• Ensure the maintenance Specifications are updated and ready in the system. Plan & monitor the Preventive & Corrective Maintenance. Practice Condition-based Maintenance to compliment Preventive Maintenance. Avoid wastages and focus on optimization in FM.
• Ensure maintenance work shall comply with the relevant Singapore Standards and Code of Practices. Ensure maintenance work shall comply with the company’s environment, health, and safety policies. Responsible for the Preventive & Corrective Maintenance work assigned by the Manager. Prepare corrective maintenance work order.
• Attend/report immediately on major equipment breakdown and equipment not performing to specifications or a building user having problem. Meet with tenants to resolve technical issues raised by the tenants. Adopt root cause analysis. Constantly monitor the KPIs specified by the Facilities Manager.
• Train & support the Technician to prepare simple maintenance work order.
• Audit the maintenance work carried out by the Technician and the external service partners according to the departmental policy.
• Actively participate technical training through onsite, offsite, and vendor training. Use the BIM, App or digital technology assigned by the company to facilitate communication. Hold regular meetings with the contractors.
• Act as the Site Incident Controller (SIC) – Leader for the first responders under the Company Emergency Response Team. Submit weekly facilities management report. Responsible for the additional tasks as and when assigned by the Facilities Manager.

Requirements:

• Degree/Diploma in Electrical Engineering or Facilities Management certifications with at least 3 years of experience
• Relevant experience in plant facility, building/property management operation & maintenance environment would be advantageous
• Highly motivated, independent and able to multi-task

At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!

Job Responsibilities

1. Supervises all technical aspects / performance of assigned vessels' operation including maintenance, repair, safety and environmental protection to ensure that these are carried out in a flawless, efficient, competitive and customer focused operation and according to the international and flag state legislation and to initiate corrective actions when such performance is not compliant with the Company's standards. Collects all necessary information in order to timely compile the dry-docking and major repair specification and participates in the planning and monitoring of major repairs and/or dry-docking repairs and services.

2. Drafts and controls fleet's technical annual budget (e.g., spares, stores, lubricants) in order to develop and implement competitive budgets and maintain the commercial competitiveness of the fleet.

3. Monitors the superintendent engineers' visits on the vessels in order to check and evaluate their condition and maintenance progress; to issue further instructions on maintenance and repair activities; to file, record and report findings to the Technical Director.

4. Reviews and evaluates quotations for all technical spares, supplies, repair services, lubricants, paints, and engine stores to be purchased and authorizes the purchase order depending on the costs.

5. Cooperates closely with the claims department for the process of damage claims and collect all necessary technical information in order to provide technical back-up in support of such claims.

6. Informs immediately the Technical Director in case of emergency.

7. Coordinates and liaises with other departments within the company to collectively provide an efficient ship management service. More specifically, assists the Insurance Dept. on collection of necessary documentation; interacts with the Purchasing Dept. for procurement cycle follow up, spares, supplies and services in coordination with the vessels; coordinates with MSQ Dept. and the DPAs to ensure that assigned vessel are in full compliance with company's SMS (:e.g., certificates, NCRs, documents etc.); works with Crew Dept. and contributes to the recruitment, training and appraisals of the seafarers employed by the company; and cooperates with other superintendents (i.e., marine) and/or fleet operators to safeguard fleet's and company's best interest and achieve optimum vessels' performance.

8. If needed, visit the managed vessels to assess their condition during PSC and/or attends dry-dock and repairs in order to monitor their progress and ensure their effective completion.

Roles and Responsibilities

• To carry out all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• Nitec in Mechanical / Electrical / Electronic or related field
• Candidates with at least 2 years of related technical experience in chillers, ACMV equipment, switchboard, and generators will be an advantage
• Candidates with no experience are welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• 5.5 working days, Mon to Fri 8am to 5pm, Sat 8pm to 12pm
• Only Singaporeans may apply

Job Summary

An excellent opportunity to join as a Salesforce Technical Engineer cum Consultant. You will be part of the Information Technology (IT) Digital team, driving technical excellence to create dynamic and scalable Salesforce solutions.

Mandatory Skill-set

• Degree in Computer Science, Information Technology, Engineering;
• Minimum of 5 years of Salesforce development experience, especially with Service Cloud;
• Good understanding of SFDC fundamental concepts (application, data and security), CRM domain knowledge (Sales Cloud, Service Cloud and Marketing Cloud) and Salesforce Lightning framework;
• Strong technical foundation in integration components for SFDC, SFDC APIs (SOAP, REST, BULK APIs), Apex controllers, Apex Web Services, Visualforce, Apex callout, inbound & outbound messaging, SFDC data loaders, middleware;
• Hands-on configuration experience in administration setup, such as managing organisation, users, profiles, roles, security controls, data & support processes configuration;
• Experience in report & dashboard configuration;
• Strong analytical and problem solving skills; experience in both process and solution analysis;
• Strong interpersonal skills, results oriented and ability to work independently and effectively in a global team environment;
• Ability to multitask effectively and deliver working solutions on a tight schedule and fast-paced environment;
• Strong oral and written communication skills.

Desired Skill-set

• Salesforce Certification;
• Service Cloud Consultant certification;
• Experience with OmniStudio & Omniscript will be a bonus.

Responsibilities

• Responsible for development, testing , implementation and documentation of Salesforce application;
• Design custom objects, custom fields, picklists, page layout, workflow, approval processes, validation rules & flow;
• Handle change request and implement enhancements using Salesforce frameworks and Apex;
• Conduct analysis and configuration of Salesforce, implement, and test the platform-specific solutions, and/or other related packages and add-ons;
• Develop and maintain integrations between SFDC and 3rd party services (eg. APIs, middleware);
• Migrating/Deploying codes and SFDC components using out of the box and/or other deployment tools;
• Document faults, implement resolution & retests, to agreed standards;
• Able to adapt to the fast-changing environment and ambiguous situation;
• Identify areas of improvement and develop mitigation plans.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Element has an opportunity for an experienced Technical Governance Manager.

You will provide technical leadership & governance of the key technical areas of responsibility; Develop the strategic understanding, approach, and execution plan for product groups and relevant technical services.

In this role, you will play a critical role in developing and implementing the technical governance framework to ensure that all activities related to testing, and certification are carried out in a consistent, efficient, and reliable manner.

Job Duties:

• Contribute to the delivery of Element’s vision and strategy and objectives
• Develop and implement technical governance policies, procedures, and guidelines in alignment with industry standards and regulatory requirements
• Lead and facilitate training programs to increase awareness and understanding of technical governance requirements among employees
• Ensure the knowledge of the industry and the development of new standards and services we deliver to our customers is shared and understood by the team
• Lead the representation of the Company on the segment's relevant technical committees and trade associations in support of the technical strategy for the segment.
• Lead the technical understanding of where we may need to invest (capital and colleagues) in order to execute identified opportunities and priorities.
• Identify from a technical leadership perspective what commercial activities including business development/marketing and training initiatives are needed
• Stay up-to-date with industry trends, regulatory changes, and emerging technologies to ensure continuous improvement in technical governance practices
• Provide guidance and support to the team on technical governance-related matters, including quality management systems, accreditation, certification, and inspection processes.
• Lead technical product sector review meetings that will involve team members across divisions, in order to share technical competence, and knowledge and contribute to the development of the segment strategy
• Monitor and evaluate the effectiveness of technical governance processes and recommend improvements to enhance operational efficiency and effectiveness
• Collaborate with cross-functional teams, including quality assurance, operations, and compliance, to ensure consistent adherence to technical governance standards.
• Comply with all company policies, procedures and processes

Job Requirements:

• In-depth knowledge of industry standards, regulatory requirements, and best practices in testing, inspection, and certification (TIC) industry
• Strong understanding of quality management systems, accreditation processes, and inspection and certification procedures.
• Knowledge of applicable legal and regulatory frameworks in the TIC industry
• Chartered Engineer in Civil Engineering or Geotechnical Engineering
• Degree/Masters or Equivalent in Civil Engineering or Materials science
• 5+ years in civil engineering within consultancy/engineering practice
• Travel between SEA and Middle East
• Excellent analytical, problem-solving, and decision-making skills to address technical governance challenges effectively
• Proficient in using relevant technology tools and software for technical governance and quality assurance.
• Active affiliation with appropriate networks and organisations and ongoing continuous professional development (CPD)
• Exceptional communication and interpersonal skills to collaborate with cross-functional teams, clients, and external stakeholders
• Leadership abilities to guide and motivate teams towards achieving technical governance objectives.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 8 years of engineering experience with a degree in Electronic and Control Systems Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Experience in planning Electrical systems.
• Experience in designing (Initial/Basic/Detailed) the Electrical part of vessels.
• Experience in development of process simulation for LNG Dual-Fuel vessel's Fuel Gas Supply System (FGSS)
• Good knowledge of ships in Electrical (both power and instrument) system and equipment, Machinery system and equipment, Alternative fuel (LNG, Methanol, etc.) systems, equipment and deep insight into trends in the maritime industry
• Well-versed in ship designing and maintenance requirements.
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Engineer under Engineering- Manufacturing System and Automation, you will be tasked to provide operational technical support to drive productivity and product quality with GxP compliance and regulatory requirements. You will also assist to drive/ execute control and automation projects and provide maintenance, backup and restore for IPC and PLCs. You will also carry out / support investigation for non-conformances.

In this role, a typical day will include:

· 1st level engineering support for major equipment downtime [24x7 supports]

· Focus on solving recurring/ long-term equipment issues through detailed understanding of the design or engineering concepts.

· Maintain and perform routine check and backup/restore for Industrial PCs/ PLCs.

· Lead and support automation/control related projects. Develop/review project documentations and related SOPs. Perform equipment/software validation.

· Prepare training materials on respective process/ system/ equipment in term of operation, maintenance or troubleshooting.

· Innovate, provide and implement ideas for process or equipment improvement.

· Ensure the system/equipment are comply with HSE, and Alcon quality requirement

WHAT YOU’LL BRING TO ALCON:

· Minimum 0-3 years of intensive hands on experiences in technical (Electrical/ Mechatronic /Electronic/Physics/ Automation) troubleshooting and experience on Siemens S7/TIA Portal, Beckhoff TwinCAT and/or Allen Bradley PLC.

· Experience on factory automation system installation/validation and understanding of GMP/GDP requirement.

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

Job Description & Requirements

- Job title will be Project Engineer and the duties are providing technical advice, supervising staff on site and ensuring that their packages are completed on time and within budget.

- Managing the Project

- Monitoring the workers

- Work at any construction site

- Prepare the progress report

- Report to the director

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

• Degree in Computer Science Engineering or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• At least 4 years’ experience in object-oriented software development.
• Strong analytical and problem-solving skills.
• Good written and verbal communication skills.
• Self-motivated, independent and a good team player.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

· Site project management.

· Overall project planning, scheduling, monitoring and updating to meet project completion targets.

· Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.

· Work closely with sub-contractors on project progress and ensure timely work arrangements

· Liaise with consultant and carry out site inspection.

· Attend weekly or monthly meeting with sub-contractors on work progression and prepare monthly meeting progress report.

· Preparation of structural analysis, loading calculation and drawings.

· Establish good relationship with all relevant parties.

· Ensure site safety & compliance to authorities’ requirements.

Requirement

- Degree in Civil or relevant Engineering

- 3-5 years’ minimum experience in Infra-structure project more than 200million.

Able to design the electrical system in the construction projects.

Must ensure compliance in the electrical systems.

Able to do coordinate installation.

Able to do maintenance and test activities.

Able to solve the issues in the electrical projects in the construction projects.

Able to lead the team of workers and site supervisors.

Job Scope :-

• Track, Monitor, Control & Update Work Progress on Site
• Plan & Schedule for Site Inspections according to Work Progress Status
• Coordinate and Schedule draw 3D Drawings & Sample Submission for Approval to client
• Conduct Regular Internal Review meetings with Trade Contractors for Site Arrangement, Work Progress, & Technical Resolutions
• Perform Authorities submission including MOM, LTA, NEC, SCA, and any others deemed necessary for the site nature
• Support current direct sales activities
• Creation for new customer
• Support distributor’s sales activities
• Creation, maintenance and management of Social Networking Services content in each country
• Sales Tool Preparation (Clinical Data)
• Business planning
• Contract & negotiation with new Distributor
• Network building with the same industry
• Cultivate new customers
• Other ad-höc duties assigned

Job Requirements :

• Engineering or above on Electrical or Mechcaniacl flied or related discipline any bachelor degree
• At least 3-4 years of experience in A&A work and technical coodinator to lead the bussiness
• Strong leadership to monitor workers for the works executed
• Demonstrate ability to handle Work independently and efficiently
• Good interpersonal skills and be able to interface with all levels, internally and externally, in a responsive manner.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results