Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

The scope of work for a Facility Technical officer typically includes tasks and responsibilities related to maintaining, operating, and ensuring the proper functioning of building systems and facilities. These technicians are essential for managing the physical infrastructure of a building, ensuring safety, comfort, and efficiency. Below is a typical scope of work for a Facility Technical Officer:

1. Preventive and Corrective Maintenance

- ACMV Systems: Regular inspection, maintenance, and troubleshooting of heating, ventilation, and air conditioning systems.

- Electrical Systems: Inspect, maintain, and repair electrical systems, including lighting, power outlets, circuits, and backup generators.

- Plumbing: Monitor and maintain plumbing systems, including pipes, faucets, restrooms, and water heaters.

- Fire Safety Systems: Check fire alarms, extinguishers, sprinklers, and emergency lighting systems to ensure they comply with regulations.

- Elevators & Lifts: Perform routine inspections and maintenance on elevators, lifts, and other mechanical transport systems.

2. Building Systems Management

- Building Automation: Monitor and operate building automation systems (BAS) for optimal performance.

- Energy Management: Track and optimize energy usage through systems like lighting controls, ACMV efficiency, and energy-saving measures.

- Safety and Security Systems: Ensure proper functioning of CCTV cameras, access control systems, and alarm systems.

- Indoor Air Quality: Regular checks of air quality, ventilation, and filtration systems to maintain comfort and health standards.

3. Troubleshooting and Repairs

- Diagnose problems with facility equipment and systems.

- Implement repairs to prevent downtime or discomfort for building occupants.

- Document all repairs and maintenance activities, including time spent and materials used.

4. Custodial and Housekeeping Support

- Provide support for building cleanliness through coordination with custodial staff to ensure hygiene standards are met.

- Assist in setting up for special events or changing configurations for space usage.

5. Compliance and Regulatory Standards

- Ensure all facility systems are in compliance with local building codes, safety regulations, and environmental guidelines.

- Conduct regular inspections to ensure health, safety, and fire compliance.

- Maintain records of inspections, maintenance, and repairs for audits or regulatory review.

6. Vendor and Contractor Coordination

- Coordinate with external contractors for specialized services (e.g., landscaping, pest control, major repairs).

- Oversee contracted work to ensure it meets safety and quality standards.

- Assist with obtaining bids for maintenance contracts or services as needed.

7. Facility Upkeep and Improvement

- Assist in planning and executing minor building improvements or refurbishments.

- Manage inventory of equipment and supplies, ensuring timely replacements.

- Participate in facility assessments to identify areas for improvement.

8. Emergency Response

- Respond to facility-related emergencies, including water leaks, electrical issues, fire alarms, or ACMV failures.

- Assist in executing emergency evacuation plans and ensuring building readiness for any crises.

9. Documentation and Reporting

- Maintain accurate records of repairs, maintenance schedules, and equipment performance.

- Generate reports on facility conditions, work completed, and potential issues.

- Monitor facility performance metrics and assist with budgeting for future improvements.

10. Communication and Coordination

- Work with facility managers, building tenants, and other stakeholders to communicate issues and maintenance schedules.

- Provide updates to management on ongoing projects or urgent repair needs.

Job Description

• Industry/ Organization Type: Manufacturing – Pipes & Tubes
• Position Title: Pre-Sales Technical Consultant/ Pre-Sales Technical Consultant (HVAC)
• Working Location: Benoi
• Working Hours: Monday to Friday (8.30 am – 5.30 pm)
• Salary Package: Basic + AWS + Bonus +Transport Allowance
• Duration: Permanent

Key Responsibilities

• Collaborate with M&E consultants, business holders, and stakeholders at the design stage of projects.
• Recommend and advocate for the use of our products in various projects (eg HVAC/Cooling Systems).
• Offer technical expertise and consultation to ensure product suitability and compliance with project specifications.
• Develop and maintain strong professional relationships with clients and stakeholders.
• Prepare and deliver detailed technical proposals and presentations.
• Coordinate with the sales team to facilitate a smooth transition from pre-sales to the sales process.
• Monitor industry trends and competitor activities to enhance product positioning.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Technical or engineering qualifications.
• Strong communication and relationship-building skills.
• Experience in pre-sales or technical consultancy is advantageous.
• In-depth knowledge of piping products is preferred.
• Excellent problem-solving and negotiation abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67817 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Period: 26 months
• Start from: February 2025

Requirement:

• Min Diploma in Civil Engineering or equivalent
• At least 8 years of relevant experience in supervision of residential buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Knowledge and Experience in institutional
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

Job Responsibilities

• Respond to the recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment at Universal Studios Singapore (USS).
• Troubleshoot failed components using basic test equipment, schematics/prints, and specialized tools, equipment, and resources.
• Report to the Team Lead during the reset of Ride & Show systems to ensure safe operation.
• Support the Attractions Operations team in the safe evacuation of guests from ride vehicles during downtime.
• Operate company forklifts or specialized vehicles, such as high-reach boom lifts, when required for the recovery of rides and shows (training will be provided by the company).
• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.
• Log completion of inspections, corrective actions, and/or repairs made, including a list of applicable parts used.
• Generate required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or a related field of study.
• 3-5 years of experience in troubleshooting and repairing basic to moderately complex systems, including electrical/PLC controls, electro-mechanical devices, hydraulics, pneumatics, and mechanical equipment (experience in these areas will be an advantage).
• Strong ability to troubleshoot electromechanical problems and use good judgment in high-pressure situations.
• Ability to work at height.
• Willingness to perform 12-hour shift work, including permanent day shifts, weekends, and public holidays.

"Join our innovative team as a Technical Support Officer in the School of Applied Science, specializing in Greenhouse and Agritech, and help shape the future of sustainable agriculture!"

Responsibilities

• Assist M&E Engineer, Superintending Officer Representation (SO Rep) in the supervision and quality assurance of construction works on site.
• Provide standing supervision required by the M&E Engineer and SO Rep.
• Check and ensure all installation methods, testing & commissioning and materials used are in accordance with the design intent, approved drawings, and specifications, as well as in compliance to code of practice/manufacturer’s installation instructions where applicable.
• Liaise with the Contractors/ sub-contractors, Resident Engineer (RE), and other Resident Technical Officers (RTO) in the coordination of site works and assist in resolving M&E issues.
• Highlight discrepancies, deviations, irregularities and feedback site progress and any critical/major issues to the M&E Engineer, SO Rep, and RE.
• Monitor the progress of work on-site, verify the contractors’ progress report and present the report to the Consultants in such format that the progress payment claim by the contractor can be easily evaluated.
• Verify the contractors’ progress payment claim in terms of work done and materials/equipment delivered and stored at site.
• Attend site meetings, client/consultant meetings, technical meetings, user group meetings, site inspections, testing and commissioning, etc
• Check as-built drawings and specifications tally with site installation.
• Ensure the contractors maintain work safety, cleanliness, and tidiness of the site.
• Maintain proper and updated daily records of all works done, including records of tests, inspections, T&C, status of work, safety, site diary, material and equipment delivered to and on site, labour, dayworks, provisional quantities, etc.
• Compile Punch List or Defect List with the contractors and ensure that the contractors carry out rectification work diligently to clear all defects during the Maintenance Period.
• Aware of the potential and actual OH&S hazards of his activities at the workplace and to highlight / communicate to the PM when he knows of any irregularities. He shall be aware of his individual OH&S obligations by ensuring that he is adequately equipped with appropriate safety gears, by observing closely to all safety rules / regulations / procedures at site and by attending all relevant site safety trainings.
• Undertake any other duties related to the project as and when instructed by the consultant. team.
• Liaise with the Contractors/ sub-contractors and other Resident Technical Officers (RTO) in the coordination of M&E systems’ interfacing, integration, and testing and commissioning between different stakeholders (i.e. Neighbourhood Centres (NCs) and Polyclinic).

Requirements

• Diploma in Electrical/ Mechanical or Building Services Engineering from local Polytechnic or other tertiary institutions of equivalent standing.
• Minimum eight (8) years of M&E work experience as a Resident Technical Officer. Past work experience in healthcare/residential/institutional projects is preferred.
• Conversant in local construction practices and codes for ACMV, electrical, fire protection, plumbing and sanitary services.
• Good co-ordination skills especially interfacing of M&E works with architectural and C&S works.
• Good analytical ability with strong verbal and written communication skills.
• Self-motivated, proactive and team player.
• Able to start Q4 2024.

Key Responsibilities:

• Manage and supervise major construction works in buildings, including services laying and lighting and control systems installation.
• Oversee the installation, maintenance, and operation of airfield lighting systems, airfield control rooms, server rooms, battery/genset rooms, M&E equipment, switch rooms, fire protection systems, and CCTV/security systems.
• Ensure compliance with Singapore standards and regulations, as well as industry best practices, throughout all construction and installation activities.
• Conduct regular inspections to ensure quality control and adherence to project specifications.
• Coordinate with contractors, engineers, and other stakeholders to resolve technical issues and ensure project milestones are met.
• Monitor project progress, including budget and schedule updates, and report findings to management.
• Implement safety protocols and ensure a safe working environment for all personnel involved in the projects.

Requirements:

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or Equivalent.
• Minimum of 3 years of experience as a Resident Technical Officer in construction projects, with a focus on building services and infrastructure projects.
• Strong knowledge of Singapore building codes, regulations, and standards.
• Proficiency in project management and construction supervision.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Responsibilities:

• Assist Resident Engineer in daily close supervision and coordination duties on Building Services mechanical and electrical
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Keep quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works

Qualifications:

• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project, or solid waste management or water infrastructure projects in Singapore.
• The candidate will be assigned duties mainly for Building services (BS) works for both mechanical and electrical aspects, hence candidate to be well versed in BS trade.
• Areas of supervision may include: sanitary and plumbing, fire fighting, ACMV, Electrical distribution, power generation, lighting design, security systems, EVC system, ISMS, ViMS, CCTV, FIDS, BACS, IBMS etc
• Familiarity with BIM software is an advantage

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Engineering/Compute Science /Information Technology.
• 8-11 years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Experience in Java 8+, Spring, Spring boot, testing framework Junit, Cucumber.
• Prefer experience working as Full Stack Senior Developer with 4 years minimum hands-on skills in AngularJS and ReacJS.
• Good to have experience in Openshift and Kafka.
• Strong hands-on with design patterns, clean code.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Strong CI/CD understanding and able to deploy microservices in container architecture.
• Demonstrated knowledge of authentication protocol and application security.
• Experience with MSSQL, data modelling, query development and performance optimization.

Technical Program Manager (Media/Entertainment Products)

• 9 months contract (parental leave cover)
• Hybrid work arrangement
• Work location: CBD

The Opportunity

• Autonomously work with teams and partners in complex, cross-functional program plans (requirements, milestones, schedules) in a matrix organization spanning engineering (software), product, user experience, and content.
• Working with teams and partners, develop end-to-end execution plans for on-time product milestone delivery.
• Track, analyze, and communicate to develop and execute against partnership goals
• Collaboratively build and actualize technical roadmaps, proactively identifying technical dependencies, constraints, risks with mitigation strategies, align on priorities, and chart the execution path for delivery.
• Drive difficult conversations with cross-functional partner teams for alignment and delivery in an independent manner.
• Participate in external client meetings
• Ongoing communication of planning, program status, issues and risks in a timely fashion to stakeholders. Distill complex topics and updates into clear and concise communications to program stakeholders and executive management.
• Support the creation of technical program management best practices for the team. Design, build, and scale processes and systems that increase efficiency and effectiveness.

Your Background

• B.S. in Engineering, Computer Science, or a related technical discipline.
• 5+ years of demonstrated experience in the technology industry as a technical program manager or engineering manager, leading development of software and/or hardware initiatives.
• 3+ years of demonstrated experience working on complex media or entertainment products, including working in Unity on Android devices.
• Experience leading cross-functional teams through the software development lifecycle and driving tech maturation.
• Experience in navigating through ambiguity, driving timely decisions, and presenting to diverse groups (technical and non-technical).
• Experience building and shipping 0→1 products from inception to delivery.
• Experience in communicating effectively with a diverse range of stakeholders, collaborators and clients, at different levels.
• Experience prioritizing tasks, managing multiple projects simultaneously, and meeting deadlines.

Interested parties please click "Apply Now" or contact May Anne Ramos (EA Reg no: R1110127) at [email protected] for more information.

Brief Summary

• Basic up to $4000 + AWS + VB
• Office Hour 5 Days : 8.30am-5.30pm
• Working Location @ Pioneer
• Semicon - Cleanroom Environment

Responsibilities

• Assemble, test, and maintain mechanical, electronic, and automated equipment.
• Follow protocols to ensure quality control and optimal equipment performance.
• Ensure workplace safety and maintain an organized environment.
• Conduct wafer and die testing, as well as die sorting, per schedule.
• Uphold 6S standards within the Fab environment.

Requirements:

• Minimum 1 year of relevant experience.
• Hands-on, team player with a growth mindset and eagerness to learn.
• Open to Singaporeans only.

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Or email your resume to [email protected] for a confidential discussion*

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22106554 | Lavonne Lai Nai Xiang

• Interacts with clients on site and remote to meet complex requirements of a solution.
• Escalates unresolved problems and issues to the relevant third parties.
• Responds to escalated client requests.
• Escalates complex problems to the relevant third parties.
• Writes reports and proposals and completes and maintains project documentation.
• Assists with the documentation of standard operating procedures relating to installations and fixes.
• Acts as coach and mentor to more junior Implementation Engineers and Technicians.
• Assumes responsibility for the coordination of the activities of the junior Engineers, in line with performance targets.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Performs any other related task as required.

Knowledge and Attributes:

• Seasoned understanding and appreciation of technical design and business principles.
• Seasoned project fundamental and administration ability.
• Seasoned project skills which are demonstrated in the execution of installations and other assignments.
• Excellent customer engagement skills
• Demonstrate relevant domain specialist knowledge.
• Excellent verbal communication skills.
• Client focused and displays a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.

Academic Qualification and Certifications:

• Bachelor's degree or equivalent in Information Technology or Computing or a related field.
• Professional level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNP, JNCIS, ACMP etc.
• Cisco Dev Net certification

Required Experience:

• Seasoned work experience in technical implementation engineering, specific to Networking technologies.
• Seasoned experience engaging with clients and conducting presentations.
• Seasoned report writing experience.
• Seasoned project management
• Seasoned experience in Networking technologies such as routing, switching, Wireless, SDI distribution, core and access layers
• Seasoned experience in diagnosis and troubleshooting

Job Description

• Plan the installation of IT solutions, CCTV & other electronic equipment
• Plan for testing & commissioning
• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 3 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends and public holidays

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Period: 26 months
• Start from: February 2025

Requirement:

• Min Diploma in Civil Engineering or equivalent
• At least 8 years of relevant experience in supervision of residential buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Knowledge and Experience in institutional
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

• Well Established Company
• Basic $3000 - $3600 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• To supervise and support the functions of incoming waste segregation including bulk waste and loose waste as well as weighbridge
• To constantly monitor improve the department performance. To conduct periodic review of existing work flows and procedures, and make recommendations for improvements and executing the improvement plans
• To supervise and ensure the effectiveness and smoothness of waste unloading, segregation and distribution
• Daily and regular inspection of the plant processes and monitor the working area 5S and TPM activities, safety and discipline at works, machineries and equipment conditions
• Ensure incoming waste streams being checked properly for suitable treatment processes and current safe work procedures are suitable for handling by operation staff
• As the core coordinator, lead and monitor the communication flow among internal departments on incoming waste discrepancy and revise related SOPs accordingly
• To evaluate and develop new treatment methods and handling procedures for new and unknown wastes, and review of operation costs and regular update to management
• To implement and supervise correct EHS practices within the department
• To work with resale for arrangement of recovered products to minimize the storage
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, nonconformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely
• Regular briefing / training to be conducted to department staffs for safety handling of high flammable solvent, MSDS, PPE requirement and risk assessment before operations
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency situation.
• To liaise with EHS department to ensure fellow dept staff are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time
• To ensure all fellow staffs are well trained according to OJT program and ensure they can follow up SOPs and work safely

Requirements:

• Degree in Engineering or Chemistry
• At least 2 years relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Product area

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Job description

A problem isn’t truly solved until it’s solved for all. That’s why Googlers build products that help create opportunities for everyone, whether down the street or across the globe. As a Technical Program Manager at Google, you’ll use your technical expertise to lead complex, multi-disciplinary projects from start to finish. You’ll work with stakeholders to plan requirements, identify risks, manage project schedules, and communicate clearly with cross-functional partners across the company. You're equally comfortable explaining your team's analyses and recommendations to executives as you are discussing the technical tradeoffs in product development with engineers.

Our goal is to build a Google that looks like the world around us — and we want Googlers to stay and grow when they join us. As part of our efforts to build a Google for everyone, we build diversity, equity, and inclusion into our work and we aim to cultivate a sense of belonging throughout the company.

Qualifications

Job responsibilities

• Review and understand Google network architecture standards, partner cross-functionally to ensure all designs and implementations balance the requirements, and future generations of networking technology.
• Evaluate alternatives and develop cost estimates for project-specific feasibility studies, create standards and templates to streamline build processes.
• Create design drawings and documents for network infrastructure and optical cabling for both ISP and OSP.
• Communicate with partners to collect drivers and deadlines for delivering network capacity.
• Travel approximately 25% of the time to Google’s Data Centers around the globe.

Minimum qualifications

• Bachelor's degree in a technical field, or equivalent practical experience.
• 5 years of experience in program management.
• 5 years of experience designing, constructing, or managing infrastructure projects.
• Experience creating infrastructure designs (e.g., telecom, electrical, mechanical), drawing sets for builds, and remodels of data center networking spaces.

Preferred qualifications

• Certified as a Registered Communications Distribution Designer (RCDD) or Project Management Professional (PMP).
• Experience in building construction management and working on evaluating data center telecom infrastructure and design of associated infrastructure.
• Experience in professional, registered, or chartered engineer designation.
• Experience in project and change management.
• Experience creating fiber routing diagrams and building path records, capacity augment projects, and generating capacity plans and migrations based on the data.
• Excellent data-driven analytical approach to solving challenges.

Job Description

• Industry/ Organization Type: Manufacturing – Pipes & Tubes
• Position Title: Pre-Sales Technical Consultant/ Pre-Sales Technical Consultant (HVAC)
• Working Location: Benoi
• Working Hours: Monday to Friday (8.30 am – 5.30 pm)
• Salary Package: Basic + AWS + Bonus +Transport Allowance
• Duration: Permanent

Key Responsibilities

• Collaborate with M&E consultants, business holders, and stakeholders at the design stage of projects.
• Recommend and advocate for the use of our products in various projects (eg HVAC/Cooling Systems).
• Offer technical expertise and consultation to ensure product suitability and compliance with project specifications.
• Develop and maintain strong professional relationships with clients and stakeholders.
• Prepare and deliver detailed technical proposals and presentations.
• Coordinate with the sales team to facilitate a smooth transition from pre-sales to the sales process.
• Monitor industry trends and competitor activities to enhance product positioning.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Technical or engineering qualifications.
• Strong communication and relationship-building skills.
• Experience in pre-sales or technical consultancy is advantageous.
• In-depth knowledge of piping products is preferred.
• Excellent problem-solving and negotiation abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67817 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Role & Responsibilty

• Responsible for quantity take-offs and Cost Control functions for projects.
• Subcontracts management.
• Supervisor and Plan for Daily work schedule and progress for requirement for targeted completion.
• Tracking of Subcontractors/ Suppliers obligations required as per agreement.
• Administering variations to subcontractors and suppliers.
• Preparation of progress certificates for subcontractors and suppliers.
• Assist in the preparation of the monthly cost reporting and forecasting.
• Identification and pricing of variations to the Contract.
• Assist in preparation of monthly commercial report.
• Maintaining registers of variations, extension of time claims.
• Liaising effectively with other Technician, engineers and supervisors to ensure all relevant information in relation to variations. and extension of time claims is captured.
• Any other duties as may be required by the Company.

Requirement

• Diploma / Degree
• Minimum 2 to 5 years experience as a Engineer
• Passionate about Project values of safety & care, being honesty & integrity, customer focus, working together and performance excellence.

Work Location: Ang Mo Kio

Responsibilities:

• Work closely with the Project Manager to ensure that the project milestones are met
• Work closely with Pre-sales team to review design, scope and effort estimation for new opportunities
• Lead a team in the project to complete the required scope on-time.
• Lead the design and architecture of cloud solutions based on business requirements and best practices.
• Oversee the deployment of cloud services and applications
• Lead cloud infrastructure provisioning, configuration, and optimization efforts.
• Collaborate with cross-functional teams to integrate cloud solutions with existing systems and applications.
• Monitor and analyze cloud infrastructure performance metrics to identify areas for optimization and improvement.
• Drive initiatives to automate repetitive tasks and streamline cloud operations.
• Provide technical leadership and guidance to team members on cloud technologies, best practices, and emerging trends.
• Evaluate cloud service providers and technologies to determine the best fit for organizational needs.

Requirements:

• 10 years of experience in IT infrastructure management, with at least 8 years focused specifically on cloud technologies.
• Relevant certifications such as AWS Certified Solutions Architect, Microsoft Certified: Azure Solutions Architect Expert, or Google Professional Cloud Architect are preferred and may be required depending on the role.
• Experience in designing, implementing, and managing cloud solutions in public, private, or hybrid environments is essential. Proficient in cloud platforms such as AWS, Azure, or Google Cloud.
• Knowledge of cloud architecture principles, including compute, storage, networking, and security concepts.
• Proficiency in cloud automation, orchestration, and infrastructure-as-code tools such as Terraform, Ansible, and Kubernetes. Experience with DevOps practices, CI/CD pipelines, and containerization technologies (e.g., Docker) is a plus.
• Experience in leading a team of technical resources
• Experience with infrastructure automation and configuration management tools such as Terraform, Ansible, Puppet, or Chef.
• Knowledge of containerization technologies like Docker and container orchestration platforms such as Kubernetes. Experience in containerizing applications, managing container clusters, and optimizing containerized workloads.
• Understanding of cloud networking concepts including virtual networks, subnets, routing, load balancing, and security groups. Knowledge of network protocols, VPNs, and SD-WAN technologies.
• Familiarity with DevOps principles, continuous integration/continuous deployment (CI/CD) pipelines, version control systems (e.g., Git), and agile methodologies. Ability to automate software delivery processes and streamline development workflows.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Descriptions:

• Project coordination and carry out analysis and design of civil,structural, bridge and geotechnical engineering discipline.
• Familiar with design softwares eg. Civil 3D, Inrails, Inroads, Plaxis 2D/3D, Staad pro, SAP, Robot, Geostudio etc.
• Management of construction contracts.
• Planning site investigations, review field/laboratory test data and prepare civil,stuructural and geotechnical interpretative reports.
• Planning instrumentation, monitoring and review/analyse instrumentation data.
• Preparation of tender specifications,documents, design reports, making submissions to appropriate authorities and attending project meetings.

Job Requirements:

• Recognised Degree in Civil/Structural and/or Geotechnical Engineering Degree.
• Minimum 5 years' relevant experience and foundation engineering design for geotechnical, buildings and underground structures. Fresh graduate with recognised degree is welcome.
• Working experience in the infrastructure sector.
• Must be fully conversant with BCA regulations; able to maintain systematically site records, contracts, documents and meet BCA reporting requirements. Fully conversant with Eurocode and appropriate Singapore Standards.
• Committed, meticulous and a good team player.
• Singaporean/SPR only.

Job Responsibilities:

• Provide service and support for security solution deployed at customers’ premises
• Understand the mechanics of equipment in the security solution.
• Know the functionality of each equipment deployed to the security system.
• Provide hands on preventive maintenance service on equipment deployed.
• Provide and maintain good customer support.
• Ensure backup information in the security system.
• Respond to fault calls promptly
• Attend to troubleshooting and repairs of equipment.
• Ensure timely and smooth progress of works.
• Ensure good quality of work and abide to safety & environmental regulations.
• Perform other official company duties as may be directed

Job Description:

· Collaborate with functional consultants to develop add-on solutions for customers.

· Develop programs in Dynamics NAV and Dynamics 365 Business Central (on- premise or online).

· Participate in business requirement study.

· Develop Power BI Report and Dashboard.

· Develop Apps for Business Central using Power App.

· Manage & review team of outsource employees’ projects.

Requirements:

· Skill in NAV C/AL, Business Central AL, JSON, .Net programming.

· Business Central Reports design.

· Webservices & API programming.

· Minimum a Diploma / Degree in IT.

· Minimum 5 years of relevant working experience.

· Strong interpersonal skills with the ability to communicate effectively.

Job Purpose

The PM, CM and operations will be carried out by the in-house teams with certain activities outsourced toVendors. TO may be assigned as Person-In-Charge (PIC) to monitor Vendors when performing their assignedtasks.

TO shall carry out the PM, CM & Operation of STMV, Locomotives and Wagons. TO shall be responsible andaccountable for his / her works and the Vendors’ works. All works shall be carried out in accordance with therelevant Quality Procedures, Maintenance Manuals, Work Instructions, Work Safety Procedures, LTArequirements, Railway Operation procedures and Contracts Specifi cation (for outsource work). All of ETB’sequipment and the associated peripherals shall be eff ectively and effi ciently maintained to the requiredoperational, reliable and safety standards to achieve the key objectives of the Branch.

Responsibilities

1. Maintain & Operate the STMVs, Locomotives & Wagons as per procedures.

2. Monitor the Vendors for outsourced works under his charge.

3. Carry out the day-to-day maintenance, operation, and administration activities of ETB.

4. Ensure that the latest version of work instructions/procedures, RA, Circulars and are used.

5. Meet the set KPIs and maintain high level of productivity and quality.

6. Attend daily Toolbox meeting conducted by AE.

7. Subjected to regular safety inspection/audit at worksites to ensure compliance to safety procedures.

8. Regularly review the requirement of maintenance tools, equipment, spares and if needed, inform AE or EMMfor procurement in a timely manner.

9. Participate in the inspection of assets for defects punch-listing and review of the defects punch-list.

10. Assist AE in mentoring new staff during their Supervised Field Training (SFT).

Qualifications & Work Experience

• NITEC / NTC 3 / Higher NITEC in the following discipline: Aerospace / Automotive / Electrical / Electronic/ Mechanical / Mechatronic / Microelectronic / Rapid Transit / Marine / Robotics.
• Preferably with a minimum of 2 years of experience in heavy/industrial equipment operation ormaintenance.

Skills

In addition, those with experience in welding, non-destructive testing, Quality Assurance/Control and thefollowing skills, attitude and knowledge will have added advantage:

- Ability to manage and lead a team of Vendors’ Supervisors/Workers working toward the department’sobjectives.

- Able to work independently and with all levels of staff .

- Possess good interpersonal and communication skills.

- Resourceful, self-motivated, and result-oriented.

SMRT Trains Ltd was incorporated in 1987 and operates Singapore’s fi rst mass rapid transit system. Today, wemanage and operate train services on the North-South Line, East-West Line, the Circle Line, the Thomson-EastCoast Line, and the Bukit Panjang Light Rail Transit. With over 5,000 employees, more than 250 trains, and 141km of rail tracks across 108 stations, we serve millions of commuters daily.

Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose – to uplift everyone, everywhere by being the best way to pay and be paid.

Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa.

We are developing and executing a shared strategic vision for Loyalty & Marketing Services platforms and products that enable Visa to be the world-leading data-driven payments company. As a Data Engineer, you will be part of world-class team of Engineers to define, drive and execute on this vision. We are looking for a self-motivated individual with software engineering skills and expertise with Java, Web technologies & Big data. The candidate will be extensively involved in hands-on activities including POCs, design, development, testing, and documentation. Candidate must be flexible and willing to switch tasks based on team's needs.

Primary responsibilities will include:

• Design and develop mission-critical systems, delivering high-availability and performance
• Work on development of new products and enhancements to existing systems iteratively by building quick POCs and converting ideas into real products
• Work closely with architects, business and technical stakeholders to develop high quality products and services that meet business requirements and expectations while applying the latest available tools and technology
• Instill best practices for software development, and deliver high quality work on tight schedules
• Identify opportunities for further enhancements and refinements to standards and processes
• Coordinate Continuous Integration activities, testing automation frameworks, and other related items in addition to contributing core product code
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Basic Qualifications

• Bachelors degree, OR 3+ years of relevant work experience.

Preferred Qualifications

• 1 to 2 years of software development work experience along with a Bachelor’s degree, or 2+ years of work experience with an Advanced Degree in a technical field such as computer science, computer engineering, or a related field.
• Solid foundation in computer science with strong competencies in data structures, algorithms, and software design optimized for building highly distributed and parallelized systems.
• Proficiency in Java or Scala with strong design and coding skills.
• Hands-on experience with web technologies including Spring Boot, HTML, CSS, JavaScript, JSON, JQuery, and REST API.
• Practical knowledge of Angular.
• Working experience with Spring and Hibernate frameworks.
• Experience with Apache Spark is plus.
• Familiarity with Git/Stash, Ant, Maven, Jenkins, and Jira.
• Experience with database technologies like DB2, Oracle, SQL Server.
• Knowledge of Unix/Linux operating systems.
• Experience with Agile & DevOps methodologies.
• Excellent analytical and problem-solving skills with a strong automation mindset.
• Capability to handle multiple competing priorities in a fast-paced environment.
• Excellent written and verbal communication skills and the ability to effectively communicate logic and implementation plans to team members and managers.
• Self-starter, quick learner, and detailed and thorough.
• Experience in payment processing is a big plus.