2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Job duty:

· Coordinate with contractor and customer to plan, organize and scheduling job activities for the assigned project.

· Monitor and control project based on plan schedule

· Represent company for project meeting and discussion with all project stakeholders

· Manage of project according to contract specification and maintain good relationship with customer

· Manage material requisition

· Record scope change and follow up on variation submission and approval

· devising control panels based on site surveys and existing documentation

· creating operations and maintenance documents including equipment schedules, points schedules, site reports and descriptions of operations

· writing bespoke software for each individual BMS project

· designing software graphics for user interfaces

· performing electrical installation checks and completing necessary alterations when issues arise

· completing mechanical installation checks for correct installation and repair if necessary

· surveying sites to provide current documentation of the site, maintenance quotes or energy savings advice

· performing commissioning checks, including both pre-commissioning and post-commissioning, to ensure everything is working as intended

· writing reports for stakeholders and senior management about the work completed, the state of the project as a whole and any other remaining work

· providing maintenance and service work to pre-existing BMS systems to ensure that all controllers and devices continue to operate smoothly

Requirements:

• Candidate must able to write & speak in English; if can speak & write Japanese is addon advantage.
• Working country: Singapore / Japan Tokyo
• Candidate must possess at least Diploma/Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical/electrical Engineer
• Preferably Engineer specialized in Engineering - Electrical/Mechanical or equivalent
• At least 3 Year of working experience in the related field is required for this position
• Energetic, leadership, self-motivated, good problem-solving skills, positive attitude, good written and communication skills.
• Self-initiative and positive thinker
• Committed on job assign

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Minimum 3-5 years of experience in infrastructure projects, e.g. roads and rail projects
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills
• Class 3 driving license will be added advantage
• Salary package commensurate with experience

Interested candidates, please email your resume to [email protected] or click apply here

Job Responsibilities:

• Plan and oversee the operations and support activities for the proper running of a major Internet-facing, public-facing application deployed on a cloud-based network.
• Ensure compliance to process, policies, standards, procedures to support governance and compliance requirements, and manage reviews and audits on these compliance requirements for the system.
• Manage procurement activities, contract and vendor admin
• Review system and application activities to detect abnormalities based on provided criteria
• Review existing processes and deliver continuous improvements to keep pace with policy and business process changes, and implement technology refresh for supporting tools and technologies
• Support enterprise level programmes and initiatives
• Manage system retirement and disposal

Job Requirements:

• Recognized Degree/Diploma in Computer Science, Engineering or equivalent
• Min 1 year relevant working experience in full stack development and maintenance

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Job Description

• Provide Install Move Add Change (lMAC), Break-Fix and end user support activities as required.
• Where required, provide support for the Manufacturing “Shop-Floor” handhelds, laptops, and scanner devices.
• Perform data collection/preservation activities as they relate to migrations and/or eDiscovery.
• Provide smart Hands and Feet support for Technology team on demand
• Rack and Stack Support for commissioning/decommissioning infra devices to be provided.
• Provide physical access to vendors on demand for site/Communication rooms – IDF/MDF/MMR and Data Center/Server room.
• Good Knowledge and experience in managing Power Shut Down maintenance activities which includes shutting down network devices and servers in Data Center
• Printer Management/usage monitoring and coordinate with Vendors to ensure print services continuity.
• Co-ordination for cable patching with Vendors or enable on demand.
• Ensure basic Network connectivity (LAN), Wi-Fi access / Video Tandberg / Printer/ Voice are available at site
• Advanced Troubleshooting / Problem Solving capabilities to narrow down root cause of incident reported by end users for IT devices and mobility support/management
• Installing and configuring hardware and software components to ensure usability by end users
• Manage IT Asset lifecycle management for the location/region including, asset collection coordination with vendor, secure storage, labelling, imaging, allocation, recovery, hygiene validation, disposal, and system updates
• Experience in supporting overall manufacturing / lab IT systems and IT devices
• Familiarity with manufacturing, lab or distribution center IT equipment
• Includes but is not limited to scanners, printers (Zebra, etc..), rugged tablets, PCs attached to specialized test equipment, PCs used on the manufacturing line, etc..
• Advanced Troubleshooting / Problem Solving capabilities to narrow down root cause of incident

Job Requirements:

• Diploma or degree in IT
• ITIL and/or any other additional certification preferred
• Minimum 2 years desk side support services.
• Advanced communications skills to work with multiple teams and/or OEMs on high priority issues
• Advanced Microsoft skills (server support, etc.)
• Knowledge / Understanding of GMP and GxP
• Knowledge / Experience on working in a Clean Room environment and/or Manufacturing environment
• Strong focus on quality and attention to detail
• Strong Analytic/Troubleshooting Skills.
• Strong Communication Skills.
• Strong understanding of MS Windows Operating Systems.
• Strong working knowledge of MS Office and basic business application.
• Strong Customer Support Skills.
• Basic knowledge of networks, telecom, and compute/storage.
• Advanced knowledge of MacOS & iOS environment & administration.
• Advanced understanding of the MacOS imaging & end-point deployment process.
• Basic understanding of policy, user certificates and keychains design, management, and deployment.
• Advanced knowledge of mobile device support

Project location: Bukit Merah

Job Description:

• Able to work within a team and resolve issues associate with site inspection.
• Conduct critical standing supervision.
• Attend to meetings, site audit and prepare independent site progress report.
• Coordinate and liaison with Engineers in answering contractor queries.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in February/March 2025

Requirements:

• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution.
• A registered Resident Engineer with IES / ACES is an added advantage.
• Minimum 8 years’ working experience as a Resident Engineer on local projects.
• Experience in supervision of Mechanical Services installation for local Hospital/Healthcare/Commercial Developments would be added advantage.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description

• Provide Install Move Add Change (lMAC), Break-Fix and end user support activities as required.
• Where required, provide support for the Manufacturing “Shop-Floor” handhelds, laptops, and scanner devices.
• Perform data collection/preservation activities as they relate to migrations and/or eDiscovery.
• Provide smart Hands and Feet support for Technology team on demand
• Rack and Stack Support for commissioning/decommissioning infra devices to be provided.
• Provide physical access to vendors on demand for site/Communication rooms – IDF/MDF/MMR and Data Center/Server room.
• Good Knowledge and experience in managing Power Shut Down maintenance activities which includes shutting down network devices and servers in Data Center
• Printer Management/usage monitoring and coordinate with Vendors to ensure print services continuity.
• Co-ordination for cable patching with Vendors or enable on demand.
• Ensure basic Network connectivity (LAN), Wi-Fi access / Video Tandberg / Printer/ Voice are available at site
• Advanced Troubleshooting / Problem Solving capabilities to narrow down root cause of incident reported by end users for IT devices and mobility support/management
• Installing and configuring hardware and software components to ensure usability by end users
• Manage IT Asset lifecycle management for the location/region including, asset collection coordination with vendor, secure storage, labelling, imaging, allocation, recovery, hygiene validation, disposal, and system updates
• Experience in supporting overall manufacturing / lab IT systems and IT devices
• Familiarity with manufacturing, lab or distribution center IT equipment
• Includes but is not limited to scanners, printers (Zebra, etc..), rugged tablets, PCs attached to specialized test equipment, PCs used on the manufacturing line, etc..
• Advanced Troubleshooting / Problem Solving capabilities to narrow down root cause of incident

Job Requirements:

• Diploma or degree in IT
• ITIL and/or any other additional certification preferred
• Minimum 2 years desk side support services.
• Advanced communications skills to work with multiple teams and/or OEMs on high priority issues
• Advanced Microsoft skills (server support, etc.)
• Knowledge / Understanding of GMP and GxP
• Knowledge / Experience on working in a Clean Room environment and/or Manufacturing environment
• Strong focus on quality and attention to detail
• Strong Analytic/Troubleshooting Skills.
• Strong Communication Skills.
• Strong understanding of MS Windows Operating Systems.
• Strong working knowledge of MS Office and basic business application.
• Strong Customer Support Skills.
• Basic knowledge of networks, telecom, and compute/storage.
• Advanced knowledge of MacOS & iOS environment & administration.
• Advanced understanding of the MacOS imaging & end-point deployment process.
• Basic understanding of policy, user certificates and keychains design, management, and deployment.
• Advanced knowledge of mobile device support

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Responsibilities

• Implement and manage Windows-based infrastructure and associated technologies.

• Monitor and maintain the health, performance, and security of Windows servers and systems.

• Administer Active Directory, Group Policy, DNS, DHCP, and related services.

• Configure and troubleshoot Hypervisor Nutanix virtualization platforms (e.g., VMware, Hyper-V).

• Install, configure, and manage Windows servers and services, including IIS, SQL Server, Exchange 2019 and Skype 2019

• Collaborate with cross-functional teams to implement and support enterprise-wide solutions.

• Perform routine system and application updates, patches, and upgrades.

• Develop and maintain documentation related to system configurations, processes, and procedures.

• Provide level 2 and level 3 support for Windows-related issues.

• Participate in on-call rotation for after-hours support as needed.

Requirements

• Bachelor's degree in a relevant field.

• At least 3 to 5 years of experience in administering Windows-based systems and infrastructure.

• Proficiency in Windows Server operating systems (2019).

• Strong understanding of Active Directory, Group Policy, DNS, and DHCP.

• Experience with virtualization platforms such as VMware and Hyper-V.

• Knowledge of scripting languages (e.g., PowerShell) for automation and scripting tasks.

• Familiarity with monitoring tools and systems management solutions.

• Excellent problem-solving and troubleshooting skills.

• Strong communication and interpersonal abilities.

• Certifications such as MCSE, MCSA, or equivalent are a plus.

Additional Preferred Skills:

• Microsoft System Center Suite (SCVMM, SCOM, SCCM, WSUS)

• Exchange 2019 and Skype 2019 administration

• Netbackup 10.x and Data Domain for backup and recovery solutions

• Nutanix HCI for virtualization and storage solutions

• NESSUS for vulnerability assessment

• F5 load balancers and RSA security solutions

• Splunk for log management and data analysis

Licence no: 12C6060

Job Description:

• Responsible for the algorithm development of an AI accounting assistant, focusing on natural language processing (NLP) and speech recognition, to ensure users can easily input entries via voice or text.
• Develop and optimize AI algorithms to improve data recognition accuracy, and handle classification and storage of accounting data.
• Collaborate with backend engineers to seamlessly integrate the AI module into the system.

Requirements:

• Bachelor's degree or higher in computer science, artificial intelligence, data science, or related fields.
• At least 2 years of experience in AI algorithm development, particularly in NLP and speech recognition.
• Proficient in Python and familiar with common machine learning frameworks (such as TensorFlow, PyTorch).
• Experience in financial data processing or accounting-related projects is preferred.
• Able to speak mandarin to communicate with chinese speaking counterparts
• Work in office (near Jurong East)

Just imagine your future with us…

At Aurecon, we see the future through a very different lens. Do you?

Innovation, eminence and digital are at the heart of everything we do. Are you excited about the future?

Are you driven by the opportunity to work on some of the most challenging and complex projects around the world and to learn from the best? We are.

Diversity is at the core of everything we do. We work together to create a culture based on respect, trust, and inclusiveness. Our differences are what fuel our creativity.

What will you do?

In this position, you will join our Transport, Land & Water business, where you will play an integral part in a team of highly skilled specialists that ‘bring ideas to life’ for our clients across all types of building and infrastructure projects.

We know the work we do is vital in assisting our world’s economic development and, it is the technical expertise and the depth of knowledge of our people that really sets us apart. Here are the key things you will do to ‘bring ideas to life’.

• Provide comprehensive design and project management services to clients, including preliminary & detailed design of Water projects including roadworks, earthworks, sewerage, water, and drainage.
• Carry out design calculations and produce sketch drawings, preparation of tender documents and proposals. Write, consolidate, and review technical reports of water projects and studies.
• Lead and delegate tasks within a workgroup, act as a technical expert to mentor other engineers within the team, while supervising and coordinating to ensure quality and accuracy of designs.
• Ensure compliance with Project Design Criteria/Client Brief/ Approved Concept, as well as relevant design standards and office standards.
• Assist in business development activities and establish good working relationship with local authorities at the project and local market level.

We know today’s complex challenges can only be solved through bringing together diverse teams of people from across our business, so there will be opportunities for you to apply your skills and creativity to projects in other geographies and markets.

What can you bring to the team?

Firstly, you will share our genuine passion for re-imagining engineering and be someone that actively pursues continuous learning to help shape the future. You will also need the following:

• Recognized Civil Engineering qualification or related field (Bachelor/ Master’s degree).
• Minimum 10 to 15 years of professional design experience in the field of civil works design preferably in roads, drainage, and sewerage projects of PUB, JTC, HDB, URA, LTA, etc.
• Sound understanding and knowledge of civil related regulation, standards, and reference of design – such as Euro Design Codes, Singapore Standards and Codes of Practice, and statutory requirements (LTA, BCA, PUB etc.), with hands on experience in usage of Civil Engineering Software.
• Excellent technical writing and presentation skills
• Energetic, proactive, and reliable team player with excellent communication and project coordination skills.

Our Aurecon Attributes define our way of being – they are a collection of qualities that makes us who we are. Individually and collectively, they unleash the true power of Aurecon, they make us stand out from the crowd and are critical to our success. We don’t expect you to have all eight of the attributes, but one that is unique to you.

Finally, we value that each of our team members brings something different to Aurecon. We look for people who have had a broad range of experiences throughout their career and can demonstrate how they have worked as part of a team to bring ideas to life. Does that sound like you?

About Us

Headquartered in Australia, Aurecon is one of the leading international engineering, design and advisory company that brings vital engineering experience, technical capabilities, and design expertise to an extensive range of markets.

Over the last 85 years, our team of more than 5 000 experts located in 11 locations across the globe have collaborated with our clients and partners to reimagine, shape and engineer clever, innovative and sustainable solutions to solve some of the world’s most complex challenges.

In Asia, where the region is undergoing rapid transformation in areas of sustainability, digital and infrastructure, we lead by being innovative, flexible, and nimble. We embrace design-led thinking – an approach that is guided by digital engineering, the user experience and sustainability – ensuring that the work we do is future ready and leaves a legacy for the next generation.

Think engineering. Think again.

Want to know more?

You can learn more about what it’s like to work at Aurecon by visiting the careers section of our website.

If you are intrigued or excited by what you have read, then we want to hear from you. Apply now!

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Job Purpose

To design, implement and support Cloud Native applications offering IAM services to internal and external customers.

The Job

· Work with team to develop and support cloud native applications that are providing IAM services to the organization.

· Perform day-to-day operations, support, patching and IAM administration

· Function as level 3, supporting incidents

· Involve in all the project and activities related to IAM including preparation of technical presentation with Business and IT stakeholders

· Maintain the completeness of all technical and architectural documentations and ensure that they are updated

· Keep abreast of latest technologies, techniques, tools, best practices and concepts, and apply them where applicable, and contribute to the overall knowledge of the company in cloud native application development.

· Be the subject matter expert on cloud native application development, and micro-service design concepts, and the ability to articulate ideas and communicating clearly to a group of audience on these topics.

· Required to perform code reviews of co-developers and possess ability to identify issues/gaps against the design specifications.

· Ability to work independently, as well as in a team of PM, BA, architects and engineers, and liaise with vendors on design and implementation activities.

· Contribute to all phases of the software development lifecycle, and support all BAU activities where applicable.

· Be aware of company’s architectural and technological strategies and to develop applications that are aligned to these directions.

· Ability to evaluate, weigh the pros and cons, and exercise good judgement when making decisions.

· Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.

· Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.

· Highlights any potential concerns /risks and proactively shares best risk management practices.

Our Requirements

· Minimum of 7 years of development experience

· Minimum of 4 years of experience in developing cloud native applications

· Must have strong hands-on development experience with Java / J2EE framework including JSP, Studs, Java Scripts, Spring Framework, JQuery, NodeJS, Angular, Vue JS and not limited to.

· Knowledge in IAM related products is mandatory.

· Experience in creating REST, SOAP, web services and/or other web protocols for application integration.

· Experience in developing and implementing of enterprise level web application or customer portal related application.

· Experience in database design and query optimisation, using database such as Oracle, MSSQL and MySQL.

· Experience in developing event driven microservices based on Kafka or similar framework.

· Experience in TDD approach in software development.

· Experience in developing cloud native applications, utilising PaaS or CaaS platform, and on technologies like Kubernetes, VMware TKGI and VMware TAS.

· Experience in using source control like BitBucket, and branching strategy.

· Experience in both Waterfall and Agile development methodology.

· Experience working in a DevOps environment.

· Experience in using team collaboration tools like Jira and Confluence.

· Knowledge in micro service concepts like service registry, circuit breaker, inter-service process communication.

· Knowledge in CI/CD and its toolchain.

· Knowledge of web and application vulnerability, native apps security, authentication mechanism, session management, Oauth & Open ID token-based authentication protocol, SAML2.0 application-level encryption, PKI, application signing, cross-site scripting, and OWASP.

· Experience with LDAP (IBM Directory server, SunONE Directory, OpenLDAP, etc.) and 2FA/MFA system/services.

· Good to have domain knowledge in the Insurance or Financial industry.

· High level of integrity, takes accountability of work and good attitude over teamwork.

· Takes initiative to improve current state of things and adaptable to embrace new changes.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

Responsibilities:

l Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

l Conduct root cause analysis & implement pro-active measures

l Responsible for supporting operational systems satisfying contractual Service Level Agreement

l Perform and manage routine preventive maintenance and operational activities promptly and effectively

l Perform troubleshooting and fault rectification

l Provide up-to-date project documentation and reports

l Diagnose and rectify technical issues

l Perform standby duties if required

Requirements:

l Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

l Strong troubleshooting skills and analytical mind with problem-solving aptitude

l Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

l Pro-active, dynamic and with good analytical/conceptual thinking

l Able to work independently as well as in a team and good interpersonal skills

l Good Working knowledge with VPN, firewall appliances would be an advantage

l Good working knowledge with routers, switches would be an advantage

l Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

l Experience in hardening of OS, system and network equipment

l Experience in Patch Management

l Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Summary:

We are seeking a highly skilled DevOps Engineer with extensive experience on the AWS platform to join our team. In this role, you will be responsible for designing, implementing, and managing our infrastructure using Infrastructure-as-Code (IaC) principles, GitOps, and artifact promotion. You will work closely with our development teams to ensure the smooth deployment and operation of our applications.

Job Responsibilities:

•Design and implement the infrastructure on AWS, using Infrastructure-as-Code (IaC) principles to ensure automation, reproducibility, and reliability.

•Implement GitOps practices, including continuous integration and deployment (CI/CD) pipelines and deployment strategies.

•Work closely with development teams to design and implement deployment models that promote reliable, scalable, and secure artifact promotion.

•Design and implement monitoring, logging, and alerting solutions to ensure timely identification and resolution of issues.

•Collaborate with other teams to ensure the necessary security and compliance standards are being met.

•Develop and maintain documentation, including infrastructure diagrams, standard operating procedures, and knowledge base articles

•Continuously evaluate and improve the performance, scalability, and reliability of the infrastructure.

•Stay up to date with the latest technologies and trends in DevOps, AWS, IaC, GitOps and artifact promotion.

Qualifications:

•Bachelor’s or master’s degree in computer science, Information Engineering, or Information management and

•Minimum 3 years of equivalent work experience

•Expertise in infrastructure design, implementation, and management on AWS, using IaC principles to ensure automation, reproducibility, and reliability.

•Expert knowledge of GitOps and CI/CD tools.

•Proven experience in designing and implementing deployment models for artifact promotion, including blue-green deployments and canary deployments.

•Experience with infrastructure monitoring, logging, and alerting solutions.

•Advanced knowledge of Linux/Unix/Docker/K8S systems administration

•Strong analytical and troubleshooting skills.

•Excellent written and verbal communication skills

•AWS Certified DevOps Engineer or equivalent certification is a plus.

If you are passionate about DevOps and AWS, have experience with Terraform for IaC, ArgoCD for GitOps, and have the desire to work in a fast-paced and challenging environment, we encourage you to apply for this role.

Roles & Responsibilities

· Study construction drawing

· Raise RFI

· Responsible for the preparation of design calculation, checking of shop drawings and submit for approval

· Prepare and issue production drawing to production team

· Liaising with other internal company functions on all matters related to design and shop drawings.

· Maintain all drawing files, update drawings as needed, and make correction to drawing as needed.

Requirement:

· At least 2 year(s) working experience in precast industry

· Proficiency in AutoCad, Microsoft office (Word, Excel, Outlook)

· Prefer with Civil Engineering/ Precast background

Primary Responsibilities:

• To interpret business requirements into technical solutions.

• Participates in projects involving many cross-functional resources and be familiar with the applications, infrastructure and security technologies.

Job Knowledge/Skills:

• A bachelor’s degree in computer science/ software engineering, with knowledge in systems analysis, design and development, software development lifecycle, Application support and maintenance.

• Good experience in eliciting requirements, modeling business processes, data requirements and software development.

• MUST have Min 5 years of solid hands-on JAVA Application development experience with in-depth competency of the following:

• HTML5, Javascript and React-JS

• Java and Springboot development

• Database: MySQL, SQL Server or Oracle

• Rest and SOAP protocals

• Others: Jasper Report, OAuth2, JWT

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Supervising and managing the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Leading and driving digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating and overseeing the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Planning, designing, and implementing Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Bachelor’s or higher degree in Information-related Degrees
• Over three years of management experience in x86 servers and SAN storage.
• Experience in VM and Linux management.
• Proficient in Windows platform management and DB2, Oracle, or SQL database administration.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.
• Flexible with availability after hours and skilled at handling on-call or on-site issues effectively.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

We are looking for a highly skilled Automation Engineer with expertise in Java, Python, TestNG, Groovy, Git, Jenkins, and basic Linux and shell scripting. The ideal candidate will be responsible for developing, maintaining, and executing automated test scripts and automation frameworks to enhance our software testing process. Experience with the Session Initiation Protocol (SIP) and telephony automation will be considered a strong advantage.

Key Responsibilities:

• Develop and Maintain Automation Frameworks: Create, enhance, and maintain test automation frameworks using Java, Python, TestNG, and Groovy.
• Test Script Development: Write and execute automated test scripts to validate the functionality, performance, and stability of software applications.
• Continuous Integration: Configure and manage CI/CD pipelines in Jenkins to support automated testing and deployment.
• Version Control: Utilise Git for source control management and ensure proper versioning of scripts and automation tools.
• Linux and Shell Scripting: Develop and execute shell scripts to support automation tasks and manage Linux-based environments.
• Collaboration: Work closely with software development, QA, and DevOps teams to identify automation opportunities and streamline testing processes.
• Reporting and Documentation: Document test cases, results, and maintain test scripts in a shared repository.
• Troubleshooting and Debugging: Identify, analyse, and troubleshoot automation issues, providing resolutions to ensure test coverage and quality.
• SIP and Telephony Automation (Preferred): Develop and execute automated test scripts for SIP protocol-based applications or telephony systems, and troubleshoot related issues.

Qualifications:

Education: Bachelor’s degree in Computer Science, Engineering, Information Technology, or a related field.

Experience: must have experience in software automation or a similar role.

Technical Skills:

• Proficiency in Java and Python programming.
• Experience with TestNG for test automation.
• Hands-on experience with Groovy scripting.
• Proficient with Git for version control.
• Experience with Jenkins for CI/CD pipeline management.
• Basic knowledge of Linux and shell scripting.
• Familiarity with SIP protocol or telephony automation tools is a plus.

Soft Skills:

• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.
• Ability to work in a fast-paced, dynamic environment.

Following skills and knowledge advantageous :

• Experience in testing telephony or VOIP applications.
• Understanding of network protocols and troubleshooting tools.
• Knowledge of other automation tools and frameworks (e.g., Selenium, JUnit).

Job Responsibility

· Providing pre and post sales and service support to customers to meet the objectives of the department

· To coordinate the activities of fellow service engineers and technicians with respect to attending service calls and issue resolution

· Systematically troubleshoot and repair of equipment in a timely manner

· Recommend proper usage, maintenance and corrective actions to customers

· Scheduling and performing preventive maintenance for contractual customers

· Support Projects and A&A works as required by the management.

· Ensure proper filing of service, warranty records and installation base

· Train and guide assistant service engineers and technicians on technical issues.

· To be the point of contact for management for updates on issue resolution and team activities coordination

· Help meet department’s financial goals by recommending upgrades/spares to customers as deemed necessary

· Help meet department’s productivity targets by reducing costs and improve productivity.

· Quoting of service pricing for repair

Job Requirement

• Minimum of Degree or Diploma in Mechanical/Electrical Engineering or its equivalent
• 1-3 years of relevant working experience in related industry
• Project Management,Product Knowledge Skills & exposed to CAD-BIM
• Able to lead a team make decisions & work under tight timeline
• Proactive to update & follow up on progress of tasks

The Lead Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role involves managing a team of engineers, collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

· Develop detailed process designs for complex wastewater treatment projects.

· Lead pilot studies and data collection efforts to validate process concepts.

· Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).

· Perform detailed calculations related to plant process design and prepare system operation & control philosophy.

· Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.

· Support Business Development on technical presentations and/or meetings with potential or existing clients.

· Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.

· Assist in project implementation, including process-related document preparation and technical clarification with client.

· Participate in testing and commissioning work.

· Any other works as instructed by the company management.

Qualifications/Experiences required:

· Degree in Environmental, Chemical Engineering, or related engineering fields.

· Min. 5 years and above in process & mechanical design in wastewater treatment plants, hands-on experience working in fast-paced, diverse, and multi-disciplined projects and O&M activities will be an advantage.

· Able to communicate with various levels of people.

· Self-motivated, team-oriented, and flexible individual must possess the initiative and ability to take on numerous challenging tasks, and new projects, and meet high standards and deadlines.

Lee Pei Fang Felicia

Email: [email protected]

Tel: 6950 9721

People Profilers Pte Ltd

20 Cecil Street, #08-09, PLUS Building, Singapore 049705

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg no: R22109421

To support the Service Commissioning team on the commissioning and testing of security and communication systems as well as to provide continual technical support to customers.

Job Responsibilities:

• Carry out testing and commissioning of CCTV, Access Control, Intercom, Fire Alarm, AV, Public Address, and other Security & Communication systems;
• Analyze equipment failures to determine the cause and recommend/take corrective actions
• Ensure all assigned jobs are completed timely and meet customers’ specification
• Provide support to Project Team on the implementation of new projects
• Attend and carry out rectification works at the site
• Carry out standby duties as per roster for urgent service requests outside office hour
• Provide customers with continuous technical and operational program support
• Provide support to projects during the DLP period to ensure all rectification works are completed before handover

Job Requirements:

• With 3 to 5 years of relevant experience in a similar field;
• A good team player, independent, and able to work under pressure;
• Positive and willing to learn attitude, coupled with the ability to take the initiative;
• Responsible and committed to meeting deadlines on jobs assigned.
• Good communication skills
• Familiar with MS Office such as Excel, Word