• Identify and resolve problems with marine motors, auxiliary engines, steering systems, and other related components.
• Repair inboard and outboard engines, focusing on fuel, cooling, and exhaust systems.
• Perform regular maintenance to ensure the proper functioning of all shipboard systems.

Requirements:

• Diploma in Marine Engineering or equivalent.
• At least 2 years of nautical maintenance and repair experience.
• Skilled in using diagnostic tools and marine service equipment.
• Good understanding of marine engines, auxiliary engines, and cargo pumps.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

• Plan technical deliverables (including any system enhancements and upgrades) to meet project’s requirements within allocated budget and schedule.
• Plan & collaborate across different application teams to manage technical dependencies of the solution
• Plan, monitor and manage risks/issues related to technical delivery
• Provide status update related to technical delivery / Program Manager
• Partner with Development Manager in managing application teams to build the enhancements
• Partner with Test Manager to ensure completion of System Integration Testing (SIT), User Acceptance Testing (UAT), performance / load testing and application security testing with quality results
• Prepare and manage technical implementation plan across application teams - coordinate technical implementation activities across application teams to ensure non-event production cutover and adequate post implementation support
• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions
• Experience in service-oriented technologies
• Good understanding and experience in software development cycle (Waterfall/Agile best practices)
• Good problem solving, analytical, synthesis, system thinking and solutioning skills
• Strong negotiation skills and vendor management skills

Responsibilities:

• Work closely with Product Owner, Product Manager and Development Team on project schedule, issues and escalation.
• Plan for and justify project IT resource allocation, including securing approval; monitor and track project resource usage.
• Work with Product Owner and Product Manager to craft and refine user stories by providing technical analysis; and building the Product Backlog with prioritization.
• Review and participate in technical proposal or solution, system design and architecture to ensure they are of quality, while adhering to all standards, governance, and policies.
• Propose feasible ideas and solutions or engage subject matter expert to provide aid and improve the quality of the product.
• Coordinate with relevant project teams of interfacing systems to ensure smooth end-to-end workflows can be achieved reliably, and efficiently.
• Work with Product Owner, Product Manager and Development Team to plan and design UAT, coordinate and monitor progress and ensure acceptance of UAT.
• Review and ensure that all documentations are complete and of quality.
• Maintain and continuously refine Product Backlog.

Requirements:

• Have strong background in Computer Science, Computer or Electronics Engineering, Information Technology or related technical discipline.
• Have minimal 3 years business analyst experience in software development projects and working experience in an Agile environment and Cloud platform.
• Possess the ability to work effectively and independently under pressure, meet deadlines, multitask and to prioritize tasks effectively.
• Possess business case and user-stories development skills.
• Possess good communication skills, ability to articulate technology concepts, participate in discussions on requirements with stakeholders.
• Possess strong collaboration skills, ability to partner and work effectively across teams and with business stakeholders in development as well as problem solving.
• Possess good knowledge of web, mobile and Cloud technologies, and their impact and feasibility on design solutions.
• Experience with Confluence, JIRA, GitLab, SonarQube, BPM modelling techniques and methods will be an added advantage.

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

JOB SUMMARY

A critical member of the team, the Service Technician balances a passion for people, a broad technical expertise, and excellence in retail practices.

A Service Technician is the front line and point person for our brand to the rider and encourages successful, profitable retail by taking their technical expertise to the next level as a driver of outstanding in store brand experiences. A Service Technician works directly with riders, both present and remote, to identify and locate the goods, services, and experiences needed to provide solutions quickly and frictionlessly to keep them riding longer and better. Service Technicians work collaboratively and hands-on with staff and local riders as a host, mentor, brand advocate, and technical service ace. The Service Technician provides exceptional rider service; enhances rider satisfaction; and aids in meeting sales and profitability goals.

HOW YOU’LL MAKE A DIFFERENCE

• Meeting and making a connection with riders, asking qualifying questions and listening to riders' needs, then giving options and advice on meeting those needs from a pre-set service menu or tune ups and a la cart service.

• Contribute to the larger Specialized R&D team by closing the feedback loop; providing insights from both the technician's perspective and remitting valuable critique and reaction from our riders.

• Speak authoritatively on technical matters as they relate and pertain to our bicycles; be the expert

• Assists customers in an enthusiastic and courteous manner; provides “wow” customer service.

• Responsible for properly taking in all service work and setting and exceeding rider expectations, including correctly filling out service work orders, scheduling an appropriate number of repairs

• Advises and assists customers with their product/service selection without bias.

• Develops and maintains knowledge expertise of all merchandise in department to effectively assist customers with accurate information; keeps current as new product lines are introduced.

• Assists with bike sales with technical consulting, and any other bike floor duties as needed.

• Deliver best in class rider-service that ensures ongoing service and high levels of rider satisfaction

• General cleanliness standards are set at store opening, maintained throughout the day, and reset at close of business, including light janitorial duty

• Proficiency in point of sale systems and store operational websites

• Regular, dependable attendance and punctuality

WHAT YOU NEED TO WIN

• Passion for cycling and the Specialized brand

• Excellent communication with the ability to effectively interact with riders and team members

• Must be able to work as business dictates which includes weekends

• Ability to stand for extensive time periods; while occasionally walking, kneeling

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in
supervision of installation and maintenance of roadside and Civil and structural coordination with
government/utility agencies and other contractors.
2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices
are complied with.
3. Strong analytical and problem-solving skills, resourceful and meticulous.
4. Highly motivated and pro-active with the ability to work both independently as well as in a team.
5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.
6. Good verbal communication and writing skills in English.
7. Be expected to travel regularly between office and sites.
8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and
equipment being deployed at sites.
2. Plan and work out the resource provision requirements, work, schedule, and Standard
Operating Procedures (SOP) for works at sites.
3. Review planned work schedule and method statements prior to commencement of site work
activities.
4. Ensure that works are carried out accordingly to design, meeting the safety, health,
environmental and comfort requirement for stakeholders.
5. Identify defects and damages at the site infrastructures, including equipment and facilities,
as well as theft, accidents, and incidents.
6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at
sites are adhered to by all site personnel.
7. Be part of Safety Committee and ensure compliance to safety, health and environmental
requirements including Authority Code of Practices (COP) and WSH, MOH & MOM
Guidelines.
8. Resolve any unexpected problems or difficulties that may arise at sites.
10. Prepare regular reports to update site progress, resource utilisation, requirements, past and
on-going activities, etc.

Job Scope:

• Design and develop automated systems and processes to improve efficiency and productivity
• Program and configure automation hardware and software, including PLCs and SCADA systems
• Conduct system testing and troubleshooting to ensure optimal performance
• Collaborate with cross-functional teams to integrate automation solutions into existing systems
• Analyze data and system performance to identify areas for improvement
• Maintain documentation for automation processes, including specifications and user manuals
• Implement safety and quality standards in automated processes
• Provide technical support and training for end-users
• Stay updated on industry trends and emerging technologies in automation
• Participate in project planning and management activities, ensuring timelines and budgets are met

Requirements:

• Diploma or Degree in engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background
• Proven track record in automation work is advantageous
• Required hands-on experience and remote support skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope:

• Install, maintain, and repair equipment and systems at customer sites
• Conduct regular inspections and preventive maintenance on equipment
• Troubleshoot and diagnose technical issues in the field
• Provide training and support to customers on equipment usage
• Prepare and maintain service reports and documentation
• Collaborate with internal teams to resolve customer issues
• Ensure compliance with safety and quality standards
• Manage inventory of spare parts and tools for on-site work
• Communicate effectively with clients to understand their needs and provide solutions

Requirements:

• Nitec/Higher Nitec in Mechatronics/Mechanical Engineering or Diploma in Mechanical/Electrical Engineering
• At least 2 years of hands-on experience in equipment servicing and repair
• More experienced candidates may qualify for higher positions
• Good command of written and spoken
• Responsible, hardworking, and able to work independently
• Positive work attitude and eagerness to learn new skills
• Availability for business trips on short notice

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Provide technical support and assist superior in project planning and coordination of all site activities.
• Prepare and revise engineering documents, drawings, risk assessments, method statements, safe work procedures, operations and maintenance manuals for all necessary works.
• To issue final specification/bill of materials for purchase order and negotiate with vendors and subcontractors to ensure budget and terms and conditions of purchases are met.
• Liaise with vendors and subcontractors to ensure timely delivery of goods, equipment and fabricated items.
• Coordinate and supervise construction teams and subcontractors for the erection, testing and commissioning of installation of equipment to the required specification and quality.
• Liaise with consultants, owners and relevant authorities on their engineering request.
• Plan and schedule work activities at sites in accordance to master program and ensure work is conducted in a timely and safe manner.
• Ad-hoc duties assigned by the Management from time to time.

Requirements:

• Candidate must possess at least a Degree in Electrical Engineering or equivalent with at least 2-3 years of relevant experience.
• Candidate need to possess keen knowledge of water and wastewater treatment technologies and the industry in general.

Please indicate your current and expected salary in your resume.

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Job Scope:

• Lead design and analysis of structural systems, ensuring compliance with codes
• Prepare engineering calculations, drawings, and specifications
• Review and approve designs by junior engineers
• Collaborate with architects and contractors for cohesive project development
• Conduct site inspections to monitor compliance with design specifications
• Mentor junior engineers and provide technical guidance
• Manage project timelines, budgets, and resources
• Prepare and present technical reports for stakeholders

Requirements:

• Minimum 5 years of engineering experience in civil and structural works
• Mandatory experience in infrastructure projects; site experience in MRT or underground roadway projects preferred
• Design management experience with consultants in structural engineering
• Recommended experience working as a consultant
• Ability to work under pressure and meet tight deadlines with minimal supervision
• Knowledge of local authority requirements
• Positive attitude, good discipline, and strong teamwork skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Wipro Limited is a leading global information technology, consulting and business process services company. We harness the power of cognitive computing, hyper-automation, robotics, cloud, analytics and emerging technologies to help our clients adapt to the digital world and make them successful.

A company recognized globally for its comprehensive portfolio of services, strong commitment to sustainability and good corporate citizenship, we have over 220,000 dedicated employees serving clients across six continents. Together, we discover ideas and connect the dots to build a better and a bold new future.

Worksoft Certify Engineer

Responsibility & Requirement

• Strong SAP functional testing experience
• Hands on experience in integrating Worksoft Certify with other applications like SolMan, HP ALM, selenium by using API's, CTM
• Experience in implementing Devops tools
• Experience & automation exposure in S4 journey is the plus
• Experience with MF ALM
• Requirement Analysis: Understand business requirements and translate them into test cases and scenarios for SAP modules.
• Test Planning: Develop test plans and strategies for SAP testing, considering both manual and automated testing approaches.
• Tool Configuration and Setup: Configure Worksoft automation tools to suit the specific requirements of SAP testing.
• Exposure in cloud applications
• Experience Design & implement automation framework
• Customize automation best practices experience
• Experience in infrastructure capacity planning
• Tool upgrades
• Good communication documentation & presentations skills.
• Good Project Management skills
• Experience in building Test management & reporting Dashboard
• Collaboration: Work closely with SAP functional consultants, business analysts, developers, and other stakeholders to ensure alignment between testing activities and business objectives.
• Troubleshooting: Troubleshoot technical issues related to Worksoft tools or SAP configurations that may arise during testing activities.

Required Skills:

• Worksoft Certify, SAP functional testing, SolMan, HP ALM, selenium.
• Prior hands on experience in several implementation projects in Worksoft Certify and other automation tools.
• Minimum experience of 6 years in related field.
• Minimum Degree in related field.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, caste, creed, religion, gender, marital status, age, ethnic and national origin, gender identity, gender expression, sexual orientation, political orientation, disability status, protected veteran status, or any other characteristic protected by law.

Wipro Limited is a leading global information technology, consulting and business process services company. We harness the power of cognitive computing, hyper-automation, robotics, cloud, analytics and emerging technologies to help our clients adapt to the digital world and make them successful.

A company recognized globally for its comprehensive portfolio of services, strong commitment to sustainability and good corporate citizenship, we have over 220,000 dedicated employees serving clients across six continents. Together, we discover ideas and connect the dots to build a better and a bold new future.

Application Support Engineer

Responsibility & Requirement

• Provide level 2 support for the core banking system of the bank.
• Application includes modules related to accounting, back office transactions, payments, risks, and reporting for local regulator or Head Office in Paris.
• Customization, Integration testing phases and document solutions, with a focus on integration of Real-Time Payments System, Products and adherence with bank policies.
• Main responsibilities In close interaction with the projects stakeholders, candidate will understand requirements ,Collaborate with technical IT specialists ,Ensure integration of the new tool with existing enterprise application ecosystem of the bank.
• Contribute in analyzing, resolving and providing technical support ,contribute to maintaining a high standard of delivery quality ,participate in technical discussions and propose solutions based on industry best practices
• Prepare and maintain support functional documentation with process flows, user stories, functional test cases, integration tests etc.

Required Skills:

• Core Banking, Application support, Unix,Java.
• Knowledge on UNIX servers and applications build on JAVA/J2EE in Unix environment.
• Knowledge on WINDOWS servers and applications management WINDOS environment.
• Understanding of Relational Database Systems like Sybase, ORACLE and MSSQL.
• Knowledge on messaging systems such as WebSphere MQ
• Good understanding of DevOps, with experience on at least one of the configuration management tools ,like ansible, Pupet
• Very good understanding of application system design, development, testing, deployment and maintenance.
• Management of requests coming from support, MOE ( Development) , infrastructure Teams ,Coordinating with different Teams ( Mainly Support Teams, Infrastructure Teams ) with primary objective of Keeping Application up and running.
• Minimum experience of 6 years in related field.
• Minimum Degree in related field.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, caste, creed, religion, gender, marital status, age, ethnic and national origin, gender identity, gender expression, sexual orientation, political orientation, disability status, protected veteran status, or any other characteristic protected by law.

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

Job Scope:

• Design, develop, and maintain electrical systems and equipment
• Perform electrical load calculations and ensure designs meet safety and performance standards
• Develop and review electrical schematics, wiring diagrams, and technical drawings
• Oversee the installation, testing, and commissioning of electrical systems
• Troubleshoot and resolve electrical issues in systems and equipment
• Conduct regular inspections and maintenance of electrical systems to ensure optimal performance
• Collaborate with other engineering teams to integrate electrical systems into larger projects
• Ensure compliance with electrical safety standards, codes, and regulations
• Provide technical support and guidance to junior engineers and technicians
• Manage project timelines, budgets, and resources for electrical engineering tasks
• Prepare technical reports, proposals, and documentation for projects
• Stay updated with advancements in electrical engineering technologies and best practices

Requirements:

• Diploma/Degree in Electrical Engineering with 2-3 years of relevant experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC application programs (e.g., Omron, Allen Bradley, Siemens, Keyence, Beckhoff)
• Familiar with PC-based programming (Visual Basic, C++) for machine controls
• Hands-on experience, able to guide technicians on schematics and layouts
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This position focuses on investigating the mechanism of pipeline leakage induced ground deformation under heavy rainfall and proposing intelligent control methods.

The scope also requires the selected Research Engineer to

• Investigate the mechanism of pipeline leakage induced ground responses under heavy rainfall.
• Propose intelligent control method for preventing sinkholes.

Job Requirements

• Possess at least a bachelor/master’s degree in relevant field,
• Demonstrate a research or professional background aligned with the development of the physical model.
• Exhibit proficiency in coupled multi-physics modelling.
• Display strong teamwork capabilities and effective communication skills.
• Open to fixed-term contract
• Please note that only shortlisted candidates will be contacted.

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 6 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field with minimum of 10 years experience

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

1. Computation and prepartion of Topographic map, Boundary surveys, all co-ordinates and level
2. Duties will primarily be office related but may require occasional field work associated with all facets of surveying including topographic mapping, control surveying and construction layout.
3. Downloads and processes field data in AutoCAD, processing of 3D Scanning Data
4. Able to work independently with minimum supervision
5. Responsible for the project team drafting activities
6. Drafting As-built plan
7. Create, analyze and modify CAD drawings for engineering projects

Job Description

- Design, build, and manage secure, scalable, and efficient cloud-based systems on Google Cloud Platform (GCP)
- Develop and deploy cloud-native applications using GCP services such as Compute Engine, App Engine, Kubernetes Engine, and Cloud Storage
- Migrate on-premises infrastructure to GCP, ensuring minimal downtime and optimal resource utilization
- Ensure compliance with security and regulatory requirements, implementing Identity and Access Management (IAM) and other security measures
- Collaborate with cross-functional teams to identify business requirements and develop technical solutions
- Optimize system performance, monitoring, and logging using GCP tools like Stackdriver and Cloud Monitoring
- Stay up-to-date with GCP innovations and best practices, applying expertise to continuously improve cloud architecture

Requirements:
- Google Cloud Certified - Professional Cloud Developer or Cloud Architect certification
- 2+ years of experience in cloud computing, preferably with GCP
- Strong understanding of cloud architecture, migration, and deployment
- Proficiency in programming languages like Java, Python, or C++
- Experience with agile development methodologies and version control systems like Git
- Excellent problem-solving skills and attention to detail

• At least 10+ years of experience in application development and maintenance with full software development life cycle experience
• Functional knowledge in Credit Card Ecosystem (Card acquisition, issuance, authorization, settlement, disputes, scheme compliance)
• Hands-on experience on cards application domain on a mainframe platform.
• Significant domain knowledge in Cards and Payments.
• Technically competent in COBOL, CICS , Batch and EZT programming
• Experienced in working with mainframe online related technologies including CICS/Online
• Message layer/API integration
• CICS Expediter
• Experience with Mainframe Batch Processing Enviornment JCL, JES2 Batch and VSAMGood working knowledge skills with Microsoft Office Products, Microsoft Visio and Microsoft Project.
• Concise understanding of the system development life cycle
• Have experience working on Cards Related application operating on Open Platform eg Linux/Windows
• Proven experience to project manage a team of developers and vendors in
• Good functional knowledge of cards to design and develop effective / efficient solutions in meeting business requirements
• Experience with large scale Cards migration on Cardlink will be advantageous
• Proven experience to project manage a team of developers and vendors in ensuring timely delivery of system enhancement of varying scales
• Good working knowledge skills with Microsoft Office Products, Microsoft Visio, and Microsoft Project.
• Concise understanding of the system development life cycle
• Effective people leader with good interpersonal skills.
• Excellent communication skills
• Strong problem solving skills
• Ability to multi-task and perform well under pressure