Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both

mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and

applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job

Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities:

· Attend to work orders allocated by Maintenance Engineers

· Analyse process parameters, alarms and information / drawings to diagnose and trouble shoot equipment problems

· Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently

· Perform unit functional test for re-commissioning of overhaul units

· Lead in the repair or replacement defective or malfunctioning components of machinery and equipment

· Assess spare part requirements and raise purchases, record parts and materials used and review tender quotations

· Coordinate logistic arrangement for all maintenance activities

· Maintain a safe and orderly work area by practicing organised housekeeping

· Preparation of weekly activity reports

· Perform other duties as assigned by supervisors

Requirements:

· Diploma in Electrical / Electronics Engineering or equivalent

· Self-driven, with good working attitude and a good team player

• Should have 15+ years of IT experience. Minimum of 12+ years experience in T24 Transact.
• Experienced in Private and wealth banking business domain. Knowledge on T24 core modules, Securities, Derivatives, Structured Products modules in Transact.
• Experience as a Core banking Business Architect with hands-on knowledge on Temenos Transact R16 and higher and with Temenos Architecture know-how.
• Must be able to provide approach, strategic and system guidance on configurations and design.
• Strong understanding of banking processes and products.
• Experienced in end-to-end implementations.
• Transact Core, EF, TDH, TWS, Analytics, Jboss, WebSphere, DSF-Workbench, Payment Interfaces BIC & MKS
• Must lead and facilitate workshops and effectively manage stakeholders.
• Understanding of deployment architecture, and infrastructure
• Exposure to TAFJ, Integration and Interaction framework (IRIS), API, TDH, DATA framework
• Experience working in Agile environment.
• Must possess excellent communication, written, oral and interpersonal skills.
• Private Banking Experience MUST
• Strong Temenos Architectural knowhow
• Strong Understanding of Integration Architecture – Message / Streaming / API
• Will have to work closely with the Product Owner, Scrum Master and BA
• Functional Knowledge in Private banking modules in T24 is an added advantage

Title: Cloud Technical Architect (AWS and Infra)

Job Description

The job involves the supervision of MRT projects Cross Island Line.

For those with less than the specified 3 years of relevant experience, training will be provided.

Job Requriements

RTO shall have diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and accredited by and registered with IES/ACES with minimum 3 years relevant experience in supervision deep excavation/ basement works.

- MRT experience will be an advantage.

- To assist RE & SRE to monitor all site activities

- Willing to work on night & rotation shifts

Responsibilities:

• Assist in daily close supervision and coordination duties of structural works
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Keep quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors, Stakeholders, Authorities, Interfacing Contractors and the like on execution of works

Requirements:

• Diploma in Civil/Structural Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• 8 years of relevant experience in quality assurance inspections on C&S works for various building/infrastructure projects
• Contract duration is for up to 12 months

Enjoy free travel, health screening, flexible benefits and more!

Responsibilities:

• Plan and manage daily preventive maintenance and repair activities and maximise manpower resources in the workshop
• Schedule buses for preventive maintenance and inspections
• Assess conditions of buses and prioritize buses due for maintenance and repair
• Liaise with vendors on maintenance issues

Requirements:

• Diploma in Electrical or Mechanical Engineering and 4 years of relevant experience
• Applicants with NITEC in Automotive Technology (Heavy Vehicles) and 10 years of relevant experience will also be considered
• Proficient in MS Office
• Positive, independent and able to work under pressure
• Good communication and interpersonal skills
• Shift work may be required

We regret to inform that only shortlisted canddiate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

Job Description (Key Responsibilities):

The Resident Technical Officer represents clients on Housing Development Board (HDB) / Land Transport Authority (LTA) construction sites. He/She must be able to read and interpret architectural drawings and details of construction projects and ensures that construction projects follow contracts and regulations. He/She shall be working under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project. He/She works indoors at project site’s office, and may also work outdoors at the project construction sites when required.

Tasks:

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons and project consultants/clients
• Ensure that contractors carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Inspect materials and workmanship of construction work.
• Perform tests to check the quality of materials.
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and project consultants/clients
• Attend meeting with qualified persons and project consultants/clients
• Prepare progress reports for their clients.
• Other ad hoc duties as and when directed

Job Requirements & Person Specification (Qualifications, Experience, Skills):

• Diploma/Degree in Civil & Structural (C&S) Engineering
• Ideally already accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• At least 2 years of experience as a Resident Technical Officer (RTO) or similar site-based role (e.g. Site Engineer) for Housing Development Board (HDB) / Land Transport Authority (LTA) construction projects

About Asia Infrastructure Solutions:

Asia Infrastructure Solutions is a leader in delivering project & programme management, cost management, sustainable design, engineering, business advisory and consultancy solutions for the infrastructure, buildings, and environmental sectors. The company was established by Global Infrastructure Solutions Inc. (GISI), the largest privately owned construction manager in the commercial building, industrial and healthcare markets, and a leading project / construction manager in the environmental and public infrastructure sectors. GISI and its founding members have over 90 years of project experience in Asia and currently employs 12,500 employees globally, operating in more than 90 countries.

Asia Infrastructure Solutions has a strong and diversified team of project managers, construction managers, programme managers, cost managers, sustainability consultants and various disciplines of engineering professionals with a long track record in the infrastructure, building and environmental sectors delivering the future for the built and natural environment. Our professional and technical expertise and capabilities are inherited from the Arcadis Design & Engineering / Hyder / Freeman Fox in Hong Kong and Arcadis Consulting / EC Harris / Davis Langdon & Seah businesses in Singapore which span many decades in the Asia region.

Notable projects in Singapore include the Jewel at Changi, CapitaSpring, the North-South Corridor, various hotels, data centers and corporate headquarters for the world’s leading MNCs to name a few.

We empower our employees to succeed and we invest in their professional growth through learning & development programmes as well as membership of professional bodies. Our employees also receive a range of benefits that includes opportunities for hybrid/flexible working, a share-ownership scheme, and private healthcare coverage.

Asia Infrastructure Solutions . Delivering the Future . AsiaInfraSolutions.com

Fair recruitment practices:

Asia Infrastructure Solutions adheres to the Tripartite Standards for Recruitment Practices in Singapore and uses fair, merit-based, and inclusive hiring practices.

Employment agencies:

Candidates referred by employment agencies will not be considered unless the agency has been explicitly instructed to provide candidates for the stated role.

OVERALL POINTS

• Objective: this professional translates market needs into strategic technical actions in the company, therefore achieving short- and long-term goals in the organization, with the main focus on Enlarging the Niobium Market.
• Reference Professionals: Professional who is a Key Professional in the Region or an Expert in his/her Technical Field, either by developing technical projects of high complexity or with technical support to the customer, fully capable of understand and promote the solution of a give challenge.
• Team Work: Although in the technical Market development department, this professional acts in coordination with the segment leaders, with the subsidiary managers and the technical experts of correlated fields

DETAILS

• Activities: this professional is responsible to work in the team to implement the activities of Market expansion and growth within existing or new customers, guaranteeing that those actions are implemented in the correct deadline, scope / quality and cost, understanding obstacles and suggesting opportunities to overcome them. Reporting of activities in project or knowledgement systems are also key part of all activities performed.
• Knowledge: Deep understanding on the customers and main players in the specific region (regional professionals) or technological segment (global professionals), in order to understand the business logic and what are the main triggers that have to be addressed to implement or expand the Niobium solution.
• Technical Communication: participate in meetings, conferences or technical presentations to customers or other players in the value chain, fulfilling widespread needs of information on niobium.

Job Description

General Scope of services

• Carry out the supervision of building works as stipulated in the Building Control Act, working under the control and direction of the appropriate Qualified Person when carry out their supervision and fully responsible to the appropriate Qualified Person.
• Supervise the Arch, C&S and M&E works to ensure compliance with contract documents and acceptable standard of workmanship and take instruction from LC, QPs and TPs.
• Arrange and supervise acceptance tests on site.
• Check and monitor that works are carried out in a safe and proper manner.
• Check and monitor for good housekeeping.
• Ensure proper documentation and records of all works, including records of test, defect rectification, inspections, work progress, material testing and safety inspections.
• Check and monitor performance of workplace safety, health and environmental measures housekeeping on site and initiate preventive/corrective actions.
• Facilitate joint checks/inspections/testing’s/handover by HDB representatives or relevant parties to ensure compliance with HDB and relevant authorities’ requirements. Such checks/inspections/testing’s shall be on aspects such as quality, safety, cost control, housekeeping, environmental control, documentation, site records etc.
• Assist PM in attending and address residents’ request/feedback.
• Any other works, as and required by the Client as stipulated in the project contract’s requirements.

Requirement

• Diploma/ Degree in Arch/C&S/M&E Engineering from a University accredited by the Professional Board, Singapore
• Must be accredited as a Resident Technical Officer with BCA/IES/ACES
• Min. 5 to 8 years’ site working experience in Singapore, Arch, C&S and M&E in building projects
• Good supervisory and leadership skills
• Excellent communication skills, mathematical acumen, time management aptitude and the ability to solve complex problems

Please apply with a comprehensive resume, stating all working experiences, current and expected salary.

About the department

The Cloudflare Customer Support Team solves complicated problems and answers technical questions via phone, email, chat and social media. Whether it is a Wordpress blogger using our services for free or a global Enterprise business with petabytes of web traffic, we are always eager to assist. We are the eyes and ears of Cloudflare, acting as the real-time voice of the customer to help communicate their needs and real-world use cases back to the rest of the company - for better service and future product development.

What you'll do

Do you like solving complex problems? Are you great at helping a team grow to surpass their potential together? Do you enjoy interacting with people at all levels and roles?

As a Technical Support Manager at Cloudflare you will:

Provide World-Class Support to our Millions of Customers - You will help the team triage and answer high priority tickets from both top partners and free customers, understand our customers needs and problems, in depth, in order to provide insights on them to the company and solve them, and are confident in addressing customer escalations with team members.

Manage Technical Support Engineers - You will coach the team to excel at their jobs, manage individual and team projects to on-time completion, have regular one-on-ones with everyone on your technical support engineering team, encourage professional development, help with training and QA, manage the support hiring process, and keep team morale high.

Help Manage and Improve Tools and Processes - You will manage and continuously improve our processes for helping customers, managing the team, and working with the rest of the company. They will also help to manage all of our support tools and software.

Work Cross-Functionally With Other Teams - You will work with other teams to guide projects that help the support team, customers and the company. You will act as the Voice of the Customer to communicate clearly the requests and problems our customers are reporting to the rest of the company through to resolution.

Examples of desirable skills, knowledge and experience

• Minimum of 3 years of team lead or management experience, with teams of 4 or more people
• Experience managing Support Engineers' performance and development
• Strong experience at hiring, coaching, and training Support Engineers
• Experience managing a team to meet and exceed their individual, team, and company goals
• Minimum of 5 years technical support experience for SaaS/PaaS enterprise solutions
• Fundamental understanding how the Internet works (OSI Model)
• Knowledge of DNS, SSL/TLS, HTTP, and network related concepts
• Familiarity with command line and command line tools including curl, dig, traceroute
• Experience providing global support that follows the sun 24x7x365
• You have strong communication skills, both verbal and written
• Past experience or interest in working at a fast-paced and high-growth company
• Ability and willingness to work occasional weekends, holidays, and after hours

Responsibilities:

· Provide application software support to client

· Optimize, debug, enhance and troubleshoot programs

· Develop new applications

Requirements:

· Diploma / Degree in IT or Engineering Fields

· At least 1 year of relevant experience in End User and Operations Support

· Knowledge: Oracle PL/SQL, Oracle Pro-C programs, Unix ANSI C, Visual Basic.net using Visual Studio 17, Unix Scripting

· Good teamwork

· Strong communication and customer-oriented skills

Please include in the CV

· Last drawn

· Expected salary

· Notice period

Interested candidates, please submit your CV to [email protected]

EA License No: 06C4642

EA Reg No: R1110624

All applications will be treated in strictest confidence and only short-listed candidates will be notified

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

This is a 12 months contract assigned to our client

Work Location: To be confirmed (during interview)

Salary Range: $9,000-$12,000

Responsibilities: As a BI Engineer, you will be responsible for developing and maintaining the Microstrategy setup within the overall Data Platform. The engineer must be able to discuss requirements with the clients and support in setup and issue rectifications.

Top 3 skills (must have)

1. MicroStrategy Business Intelligence

2. ETL Pipelines

3. Data Modeling Techniques and Methodologies , strong MSTR knowledge

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS, PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• ·Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• Degree in Electrical / Electronic / Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.

Job Responsibilities:

• Integrate best practices from development, platform and application testing, and process support throughout the software development lifecycle.
• Oversee tool development, solution creation, integrated tool and platform testing, and enhance speed and productivity.
• Build, configure, and provide support for new development infrastructure and tools.
• Understand stakeholder requirements and effectively communicate them to the development team.
• Explore and implement new methods to automate and improve development and release processes.
• Review and test code written by others, analyzing the results for quality.
• Ensure systems are protected against cyberattacks and security threats.
• Identify technical issues and bugs, and develop software updates to resolve them.
• Collaborate with engineers to ensure software is developed according to established processes and functions as expected.
• Plan and manage projects, contributing to project management activities.
• Actively participate in HSE (Health, Safety, and Environment) initiatives, including hazard/incident identification, risk assessments, and control measures.
• Ensure work activities and behaviors align with HSE policies, objectives, and procedures, and comply with relevant legal requirements.
• Perform additional duties as required to support the role.

Requirements:

• Minimum diploma in Computer Science, Information Technology, or a related discipline.
• Experience in developing application systems, including database applications, Excel macros, web applications, Android mobile apps, IoT projects, Microsoft Office automation, and Microsoft Power BI development.
• Knowledge and experience in implementing Industry 4.0 solutions.
• Quick to learn with a proactive attitude toward acquiring new skills.
• Strong communication skills.
• Analytical and creative problem-solving abilities.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

VFlowTech is excited to offer a PhD scholarship under the Industrial Postgraduate Programme, a fully funded initiative by the Singapore Economic Development Board and Enterprise Singapore. This program provides aspiring researchers with the opportunity to address critical challenges in Vanadium Redox Flow Battery technology, focusing on mitigating shunt currents, reducing losses, and enhancing system reliability and efficiency. Candidates will be full-time employees of VFlowTech while pursuing their PhD at Newcastle University (UK).

The research project aims to develop a hybrid energy storage system (HESS) by integrating flow battery and lithium-ion battery technologies into a single microgrid solution. The candidate will contribute to hardware development and advanced control algorithm creation, optimizing performance, efficiency, and reliability. This prestigious program offers a unique opportunity to drive innovation in energy storage systems.

Key Responsibilities:

1) Design and Simulation of Hybrid Energy Storage System (HESS):

• Determine suitable battery chemistries and sizes for the HESS.
  • Conduct simulation tests and analyze initial results to ensure optimal design and functionality.

2) Development and testing of HESS Hardware:

• Implement and integrate the simulated HESS design into the physical hardware.
  • Conduct intensive testing and validation of the HESS prototype to ensure performance standards are met.

3) Development of Energy MAnagement System (EMS) Algorithm:

• Develop a hybrid EMS to control and optimize the use of both battery technologies.
  • Implement smart charge and discharge control logic to enhance system efficiency, reliability, safety, cost-effectiveness, lifespan, and overall power and energy density.
  • Utilize state-of-the-art AI techniques to develop advanced EMS algorithms for efficient energy management.

Qualifications:

- Academic Background:

• An Undergraduate or master’s degree in electrical engineering, Power Electronics, Energy Systems, or closely related field.
  • Strong academic record and research experience in relevant areas.

- Technical Skills:

• Proficiency in power electronics and energy storage system design.
  • Experience with battery management systems (BMS) and energy management systems (EMS).
  • Familiarity with simulation software and tools used in power and energy systems.

- Research and Development:

• Demonstrated experience in designing, simulating, and testing energy storage systems.
• Ability to conduct independent research and develop innovative solutions to complex problems.
  • Strong analytical and problem-solving skills.

- Soft Skills:

• Excellent written and verbal communication skills.
  • Ability to work collaboratively in a multidisciplinary team.
  • Strong organizational and project management skills.

Benefits:

• Opportunity to work on a pioneering project with significant real-world applications.
• Access to state-of-the-art research facilities and resources.
• Collaboration with leading experts in the field of energy storage and power electronics.
• Competitive salary and funding for research-related expenses.
• Work and earn a PhD degree simultaneously with no tuition fee.

Application Process:

Interested candidates should submit the following documents:

• A detailed CV highlighting relevant experience and skills.
• A cover letter explaining your motivation for applying and your research interests.
• Academic transcripts and certificates.
• Contact information for at least two academic or professional references.

Deadline:

Applications will be reviewed on a rolling basis until the position is filled. Early applications are encourage.

Contact:

For further information or to submit your application, please contact: h[email protected] and [email protected]

Join us in advancing the future of energy storage technology and making a significant impact on the efficiency and reliability of micro-grid systems!

Field Service Engineer

• 5 Days (Mon-Fri)
• 830am-5pm
• $2,800-$3,800 + $120 Transport Allowance
• Gambas Crescent

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279