Technical Manager (Mechanical (ACMV))

• Working Day: 5 Days | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: S$ 6,000 - 9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical (ACMV) services.
• Good knowledge in Mechanical works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for Mechanical (ACMV) services is preferred

Job scope

• Preparation and submission of Mechanical tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on Mechanical QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Position:- Resident Technical Officer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Diploma in Civil Engineering or equivalent.
• Registered as Resident Technical Officer with BCA/IES/ACES.
• At least 5 years of site supervision experience as Resident Technical Officer.
• National Certificate on Construction Supervision from BCA Academy or equivalent.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• assist the supervising Qualified Persons to ensure that ground instrumentation ,check Environmental, Health and Safety matters, upon completion of the construction works, inspect and prepare the lists of defects, of any;
• inspect and assist with the taking over of completed works and handing over to facility and estate management personnel and/or appointed managing agents / facility management companies;
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Civil Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing;
• Registered as Resident Technical Officer with BCA/IES/ACES; and
• At least 5 years of site supervision experience as Resident Technical Officer.
• National Certificate on Construction Supervision from BCA Academy or equivalent.

Responsibilities

• The Resident Technical Officer (M&E) shall be familiar with the respective M&E system testing and Commissioning (T&C) procedure and attend T&C and necessary follow up with the Consultant and Contractor;
• The Resident Technical Officer (M&E) shall demonstrate strong understanding of respective M&E sequence of works and co-ordinating works;
• The Resident Technical Officer (M&E) shall have experience in solving site clashes/problem with regards to M&E and other disciplines.
• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Mechanical or Electrical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

Duties & Responsibilities

• Lead the entire process of 3D animation generation algorithm research and development, including requirement analysis, conceptual research, algorithm development& validation for a complex algorithm subsystem. Identify and solve algorithmic technical problem.
• Integrate large language models with 3D animation generation to expand the current application scenarios and interactivity of generated animation.
• Incorporate deep reinforcement learning techniques to learn more complex actions from real-world data and improve perception of the surrounding environment

Job Requirements:

• Master's degree or above in AI, computer graphics, computer vision, computer science, AR/VR, rendering or related majors. Familiar with basic computer graphics knowledge and understanding of character animation driving methods. Familiar with mainstream 3D animation editing and rendering software such as Blender, UE, Maya or Unity. Proficient in one programming language such as C/C++/Python
• Proficient in one AI development framework such as TensorFlow/PyTorch/Mxnet, with experience in computer vision and AI algorithm development. Familiar with generative networks (such as VAE, GAN, Diffusion) and have experience in AIGC project development.
• Candidates with experience in leading a team will be given priority

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Job Description

• Industry/ Organization Type: IT/ Cybersecurity
• Position Title: Technical Support Officer (SSL)
• Working Location: Tai Seng
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + AWS + 1 to 3 months VB
• Duration: Permanent

Key Responsibilities

• Interact with customers, resellers, and partners to identify and resolve technical issues.
• Provide first-level technical support for Secure Socket Layer (SSL) certificates via phone and email.
• Coordinate and escalate complex technical issues to the team and/or partners when necessary.
• Document issues encountered and their resolutions for tracking purposes and future reference.
• Conduct basic SSL technical support training for the Sales Support Team.
• Perform any other ad-hoc duties as required.

APPLY NOW!!!

• Minimum NITEC in IT/ Computer Science or its related discipline, with at least 1 year of relevant work experience.
• Strong SSL product and technical background is required.
• Proficient in Microsoft Office applications.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71349 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities

• Responsible for Design and delivery of DeltaV systems on site.
• Participate in the design, development, and implementation of Automation solutions in line with S88 standards for the plant.
• Lead team of engineers to deliver the Automation Project on site.
• Lead, design Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards.
• As a Subject Matter expert, lead development of systems architecture, specifications, controls strategies, sequence of operations through all design stages
• Build and maintain trusted relationships with client.

Requirements

• Good technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Good experience In Automation Sector ideally in the Pharmaceutical and/or Biotechnology industry.
• Good Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc),
• Familiarity with GAMP lifecycleand quality management processes employed in the pharmaceutical sector.
• Excellent computer skills, proficient in Microsoft Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills.
• Leadership abilities, works well in a team environment.
• Capacity to lead team of engineers for design, development, and delivering Automation projects.
• Experience with Operations Support on site
• Good analytical & problem-solving skills

Technical Consultant (Sharepoint & Power BI)

Our Client is seeking a talented Microsoft Platforms Specialist to optimize their business processes using advanced technology tools. This role is essential for ensuring their Microsoft platforms meet the evolving needs of the organization.

Responsibilities

• Collaborate with various departments to enhance and tailor Microsoft platforms for business optimization.
• Partner with cross-functional teams—including analysts, designers, and developers—to create and deliver robust solutions aligned with user requirements.
• Diagnose and resolve design, infrastructure, and data-related issues within Microsoft Power Platform and SharePoint (both Server and Online).
• Ensure compliance with organizational security protocols and permissions across platforms.
• Maintain and upgrade SharePoint servers and web parts to the latest versions, applying necessary security updates and patches.
• Design, manage, and develop solutions on the Power Platform, emphasizing user-centered development.
• Work closely with database administrators to ensure seamless integration of Power BI with our new data platform.
• Handle maintenance tasks related to the Power BI Gateway.
• Manage vendor relationships pertinent to SharePoint and Power Platform services.
• Address and resolve technical challenges in collaboration with system and database administrators.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related discipline.
• Minimum of 5 years of relevant experience in SharePoint/Power Platform with a focus on complete project lifecycles.

Strong programming proficiency in:

• Power BI (Must Have)
• SharePoint Designer
• Sharegate migration tool
• MS SQL Server T-SQL
• .NET C#/CORE, MVC 4/5
• HTML, CSS, JavaScript, JQuery
• SQL and XML
• Demonstrable experience as a SharePoint Administrator or in a similar capacity.
• Deep familiarity with SharePoint security models and permission frameworks.
• Expertise in configuring and customizing SharePoint environments.
• Experience with PowerShell scripting for task automation and management.
• Exceptional analytical and problem-solving skills, with a meticulous attention to detail.

Location : North East

Kindly indicate your current/last salary details and your notice period

Interested candidates kindly forward your CV to [email protected] (Michelle Dai Yiying, Reg No: R1982577). Feel free to forward this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Job Position:- Resident Technical Officer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Diploma in Mechanical Engineering or equivalent.
• Possess at least 5 years of relevant and practical experience on site.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

• Central-North location
• 5 days work week
• $7,500 - $13,000 + Variable bonus
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Responsibilities:

1. Produce and manage technical documents, including writing technical cases, monthly technical reports, updating PDI technical files, and managing inventory vehicle technical documents.
2. Manage market technical operations, including managing and improving service provider technical managers, internal training management, regular assessment management, technical capability evaluation and improvement, market survey analysis, localization promotion, and the implementation of company technical management regulations.
3. Provide claims support, including promoting technical determination of fault responsibility and pre-review of claim forms.
4. Follow up on technical projects, including managing and supporting technical projects and promoting market-oriented projects.
5. Manage quality, including collecting and organizing market issues and following up on difficult problems with relevant departments at headquarters.

Recruitment Requirements:

• Minimum Degree in relevant field such as Electrical Engineer..
• At least 3 years of experience in vehicle maintenance or and after-sales technical management.
• Strong interpersonal communication and coordination skills.
• Preferable with class 3 driving licece.
• Proficiency in English or Chinese in order to liaise with HQ colleague from China.

Responsibilities:-

1. Costing & estimation of switchboards, etc.

2. Assist in preparation of quotations, technical data, compiling brochures, catalogues & technical details, layout dimensional drawings, etc... required for submission to clients.

3. Assist Sales Team in following-up for orders.

4. Develop & implement use of computer for costing, estimation & quotations. Set-up and improve on standardised costing method.

5. Check & compare costing / estimation against actual costs for awarded job. Budget planning & control for jobs.

6. Responsible for correct / accuracy of acceptable level in costing.

7. Sourcing of components / parts with assistance from Purchasing Department. for better alternatives, improvements, cost effective, etc. when required.

8. Assist in co-ordination work (internal or external).

9. Take on added tasks / responsibilities as assigned by the superiors

10. Follow the procedures of the Quality Management System for effective implementation and control.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act. Please refer to Annex A for more details on the list of responsibilities for RTOs.
• To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the Client, PM, SO, SOR and QP to ensure that works are constructed to required quality and accuracy.
• To monitor progress of the works on site and at any off-site manufacturing facilities and ensure that the site programme is in accordance with the approved construction programme. Any deviations from the construction schedule shall be reported immediately to the Client, PM, SO, SOR and QP. In the event of delays, the Resident Technical Officer shall assist the contractors to mitigate delays but without comprising on the quality.
• To ensure and maintain proper updated records of all works done, including records of tests, inspections, status of works, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities, etc and all other records as directed by Building Control Authorities.
• To study the contract documents and drawings and verify if there are any discrepanciesamong the drawings. All discrepancies shall be brought to the attention of the Employer concerned.
• To ensure that all installation methods and material used are in accordance with the contract drawings and specifications, and report to Client, PM, SO, SOR and QP on any materials that are not conforming to the specifications
• To liaise with the Main contractor and the Architect / M&E / C&S Engineer in the checking and approval of shop drawings, catalogues and samples.
• To liaise with the Main contractor in resolving site problems. All problems on site shall be referred immediately to the Client, PM, SO, SOR and QP. The Resident Technical Officer shall issue sketches or directions as and when necessary. All site memos shall be copied to the Employer.
• To ensure that the Main contractor comply with the Ministry of Manpower’s guidelines and recommendations for construction safety and the owner’s in-house safety management system.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings.
• To follow up and report to relevant Employer within three (3) days for site issues raised during the meetings.
• To manage the team of supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements and supervisors’ overtime claims.
• To ensure that all reinforcement, formwork, penetrations, etc. are finally checked prior to concreting. All concrete pours during office hours and all critical pours even after office hours shall be supervised by you personally (i.e. standing supervision).
• To record collate and file all incoming and outgoing design, shop, construction and coordination drawings. All old construction drawings shall be stamped ‘superseded’ and no checking shall be carried out on the superseded drawings.
• To generate defects list, supervise and monitor progress of rectification works and ensure that all defects are rectified as per Employer’s advice.
• To advise the Employer on the percentage of works completed for the purpose of verifying progress payment valuation, and to check contractor’s claims and variation orders.
• To ensure that the contractors record accurately on drawings, the installation works on site. This is to ensure that the as-built drawings reflect accurately the work that has been done on site. Also to check against the Employer’s drawings and identify and highlight the changes of variation orders so that Employer can direct the contractor to finalise the as-built drawings and to maintain a set of updated drawings on site.
• To check on quality of materials delivered to site and report to Client, PM, SO, SOR and QP of any materials that are not conforming to the specification. And to verify reports and claims submitted by contractors and to certify and sign on Delivery Orders
• To submit daily reports and updates to HDB based on an approved format. This will include and not limited to daily noise meter readings, daily safety and manpower reports.

Qualification

• Diploma in Civil/Structural Engineering or an equivalent certificate from a recognized institution/university or acceptable to the Commissioner of Building Control.
• Registered RTO (with BCA / IES / ACES) with Min. 5 years of RTO experience, institutional Project working experience preferred
• Good understanding in construction drawings and specification for Structural and / or Architectural works
  Familiar with Singapore Building Control Act and Construction Regulations.
• Good knowledge or experience in several aspects of construction activities
• Experienced in Coordinating Architectural / Structural works with project team
  

• Perform PM, CM and BM of vehicles;

• Ensure the maintenance services and quality work is carried out with high quality in-accordance with the guidelines and report to workshop supervisor for necessary technical assistance;

• To complete the job within the specified time given;

• Conduct diagnostic check, troubleshooting, automotive transmission and engine overhaul if required;

• Responsible for maintaining, troubleshooting and rectifying vehicle defects;

• Maintain the tools and equipment well;

• Ensure good housekeeping in workshop at all times.

• Perm, Central
• Background in vendor professional services or delivering enterprise-level solutions with proven experience in software development, architecture, and SDLC best practices.
• Strong leadership skills with a track record of mentoring and managing technical teams.
• Familiarity with the banking/financial services industry.

As a Technical Services Manager, you will play a critical role in driving success by combining technical expertise, leadership capabilities, and client relationship skills. You will oversee technical delivery, guide teams, and act as a trusted advisor to various clients. By ensuring alignment between client needs and technical solutions, you will contribute to the excellence of the technology business unit.

Job Description

Team Leadership

• Lead and mentor a team of developers and architects, fostering a culture of innovation, collaboration, and continuous growth.
• Conduct performance evaluations, provide career development support, and ensure team members are equipped for success.

Technical Leadership

• Provide hands-on guidance in software development, system architecture, and the Software Development Life Cycle (SDLC).
• Review and evaluate designs, code, and system architectures to ensure delivery of high-quality solutions.

Client Collaboration

• Serve as a trusted technical advisor to clients, addressing challenges, managing escalations, and maintaining strong relationships.
• Ensure clear communication and alignment between client requirements and technical delivery.

Best Practices & Delivery Excellence

• Establish and promote best practices for development, architecture, and quality assurance.
• Oversee technical project delivery and coordinate with business units to address challenges and meet regional commitments.

Technical Expertise

• Leverage proficiency in one or more of the following areas: cloud platforms (AWS), databases (Oracle, MS SQL, PostgreSQL), operating systems (Linux/Windows), Java frameworks, or DevOps tools (Docker, Kubernetes, CI/CD).

Requirements

• Proven experience in software development, architecture, and SDLC best practices.
• Strong leadership skills with a track record of mentoring and managing technical teams.
• Exceptional client-facing and problem-solving abilities.
• Ability to balance people management responsibilities with hands-on technical delivery.
• Expertise in cloud platforms, databases, operating systems, Java frameworks, or DevOps tools.

Preferred Qualifications:

• Experience with Anti-Money Laundering/Fraud solutions or similar platforms.
• Background in vendor professional services or delivering enterprise-level solutions.
• Familiarity with the financial services industry.

Triton AI Pte Ltd

Registration Number: R1980724

EA: 21C0661

Our client is renowned luxury hotel architecture firm seeking a highly skilled and experienced Senior Manager to lead our MEP Technical Services team. The ideal candidate will have a strong technical background in Mechanical, Electrical, and Plumbing (MEP) systems, coupled with excellent leadership and project management skills. This role will be responsible for overseeing the technical delivery of MEP services across a range of projects, ensuring compliance with industry standards and client requirements.

• Provide Technical Services Advisory to ensure adherence to Design Brand Standards for new-build, conversion, re-branding and refurbishment projects from the design stage through to hotel opening.
• Prepare engineering services briefs for new project, review and comment on consultants designs for efficiency, appropriateness in design and operational issues.
• Provide engineering input/advice for due diligence process on potential new/conversion and/or renovation of existing hotels and conduct pre-opening reviews relative to Brand Standards.
• Conduct regular and periodic site visits to assigned projects for the purposes of ensuring compliance with Brand Standards.
• Conduct technical inspections as required of potential or existing properties and complete Property Improvement Plans (PIPs).
• Review design and construction standards periodically and contribute to the process of maintaining the Brand Standards in line with the sustainable technologies.
• Provide advice and direction to Hotels DOEs on Standards and Procedures, Fire, Life & Safety and Environment issues.
• Identify, develop, document and implement sustainability initiatives related to decarbonization, waste management, energy and water efficiency efforts.

Job Skills

• Demonstrate leadership capabilities and team player.
• Strong work ethics and excellent learning/work attitude, independent and can perform without much supervision (hands-on).
• Organizational adaptability & versatility in managing across different cultures.
• Excellent in written & verbal presentation skills.
• Responsible for the effective implementation in your respective service units.
• Good interpersonal skills to relate well with all various stakeholders.
• Strong passion for Sustainability, ESG and process implementation
• Ability to work under pressure and meet challenging deadlines.
• Understanding of good construction, technical practices; keen eye for details.

Requirements:

• Minimum 8 to 12 years experience in a lead role in consultancy or hotel technical services. Experience in hospitality projects will be an added advantage.
• A degree in Engineering, Architecture, or a related field, preferably with a focus on design, construction, or technical services.
• Recognised professional qualification in mechanical or electrical engineering or related discipline.
• Familiarity with sustainability programs including Green Mark, LEED, Earthcheck etc
• Experience in energy and sustainability technology identification and implementation would be an advantage
• Good understanding of design and construction standards to ensure processes are in compliance to Brand Standards
• Proactive team-player, independent and able to work under pressure in a fast-paced environment

Interested candidates, please send your CV to: [email protected] or click to APPLY

Gemini Personnel Pte Ltd

EA License number: 23s2015 | EA Registration number: R24120181

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Roles & Responsibilities:

- Provide support to the superintendent in the planning, execution, and finalization of dry dock and repair projects, and attend the project site as required.

- Assist the superintendent with the preparation of the OPEX budget.

- Coordinate and arrange service engineers for boarding operations.

- Review, update, and prepare vessel shareholder presentations for timely submission.

- Maintain records of fleet service arrangements and End of Month (EOM) reports, including technical bulletins from manufacturers.

- Prepare and complete monthly post-meeting reports for Charterers/Fleet.

- Administer the disbursement account, ensuring line items and account codes are accurately detailed.

- Review Management Meeting minutes and provide a summary to the superintendent.

- Distribute monthly Class status reports to vessels, including details on expiring certificates.

- Assist with tasks related to EU ETS, EUMRV, and IMO DCS compliance.

- Support the review and processing of PAL occurrences as guided by the Fleet Manager, and help the superintendent close occurrences using Tableau data.

- Appoint Agents following the superintendent's instructions.

- Handle any other required documentation and filing tasks as assigned by the team.

- Assist the superintendent with Guarantee claims management.

- Support both internal and external Survey and Audit Requirements.

- Monitor and report progress on the Teams' "Management of Change" initiatives.

- Review and manage fleet weekly operational data and monthly KPIs, ensuring that the fleet team stays informed.

- Create and finalize presentations for Charterers/Owners as needed by the Fleet team.

Requirements:

- Bachelor’s Degree (preferably in ship management, maritime operations, or a related science discipline).

- Training in Secretarial skills.

- Excellent written and verbal communication abilities.

- Motivated to thrive in a dynamic, challenging, and results-oriented environment.

- Fresh Graduates are encouraged to apply!

Ackcio Pte Ltd builds reliable wireless monitoring solutions for industrial applications. Our Ackcio Beam suite of products runs off our core technology, a long-range, low-power radio wireless mesh communication to reliably transmit industrial sensor data in real-time both underground and above ground. Currently our technology is widely used in construction, mining, infrastructure, and rail industries to automate the monitoring process, improve productivity, and make the activity safe. We now help major clients in 45 countries across 6 continents monitor their projects with our technology.

Ackcio was incorporated in Singapore in 2016, and has drawn investments from prominent investors including Wavemaker Partners, Enterprise Singapore, Accelerasia, Aletra Capital Partners, Foundamental, and EF.

Responsibilities

• Be the go-to person for clients, helping them get the most out of our products.
• When customers run into challenges, you’ll work with them to come up with easy, clear solutions.
• Suggest ways to improve user experience and get more people using our products.
• Guide clients on the best ways to use our products and how they can get the most value.
• Look for ways to help customers expand how they use our product and offer them more value.
• Share customer feedback and ideas for improvement with the rest of the team.
• Share your product expertise in customer interactions to help them succeed.
• Communicate with customers via email, and phone to help them get the hang of our products.
• Provide ongoing support to ensure customers continue to succeed with our solutions.
• Represent customer needs and issues to make sure they’re heard across the company.

Requirements

• A background in technology, computer science, or IT/networking.
• Fluent in English; additional languages are a plus.
• Willing to travel for customer site visits with on-site troubleshooting work if required.
• Excellent communication skills and a friendly attitude.
• Strong problem-solving abilities and quick to learn.
• Ability to handle multiple tasks and meet deadlines.
• A self-starter, both independent and team-oriented.
• Proven track record in customer support and problem resolution.
• Passionate about helping customers succeed.

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Computer Science.
• 10+ years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Microservices, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization.

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices.

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

Contract Period: From 15 Jan 2025 for 4 months with an extension of 3 months depending on the project requirement

Working hours:

· Mondays to Saturdays: 8.00 am to 6.00pm, inclusive of 1 hr lunch break

Scope of works:

· To carry out supervision and inspection of the works so as to ensure that works are constructed in accordance to contract specifications and drawings.

· To carry out quality check on the works to ensure compliance to drawings and specifications so that works are produced of required quality and accuracy.

· To verify and submit weekly report on contract to HDB.

· To carry out random tests/checks in accordance to drawings and specifications.

· To check on quality of materials delivered to site and report to Qualified Person (Supervision)/Consultant/Resident Engineer on any materials that are not conforming to the specifications. The SO’s Rep shall be informed of nonconformance.

· To ensure proper and updated records of all works, including records of tests, inspections, site diary, work progress, approved drawings including all amendments, all departures or deviation relating to the specified works provided by Design Qualified Person. The attendance of Qualified Person (Supervision) and Qualified Site Supervisor, and etc, are to be kept. The records of all works are to be delivered to the Qualified Person (Supervision)/Consultant/Resident Engineer upon completion of all works.

· To supervise and keep records of repair works in accordance to approved method and standards.

· To take and carry out instructions including administrative tasks from the SO’s Rep and/or Qualified Person (Supervision)/Consultant/Resident Engineer.

· To attend meetings held with SO’s Rep/ Qualified Person (Supervision)/ Consultants/Resident Engineer and keep proper minutes of meetings.

· To attend to queries from SO’s Rep/ Qualified Person (Supervision)/ Consultants/ Resident Engineer.

· To oversee the safety aspects and raise to the SO’s Rep immediately any “Unsafe Acts and Unsafe conditions” observed.

Qualification, skills, experience:

· At least 3 years relevant working experience in civil/structural construction.

· The working experience shall include involvement in at least 2 commercial property upgrading projects.

· Under the Building Control Act, RTOs shall be accredited with Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore (ACES).

· Proficient in using Microsoft Word, Excel and Powerpoint.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De