Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Manage the Technical Service function to ensure that the local organisation receives the required technical service to ensure projects are carried out according to specification and customer satisfaction and that Jotun is a preferred supplier in the market. This position will be based in Tuas, Singapore and reporting to General Sales Manager – Marine & Protective.

Responsibilities:

• Build and develop a competent, organised and close-knit technical service team with the potential to work across segments.
• Develop and monitor the application of operating systems, including policies, procedures, and operating structure to ensure Jotun’s quality standard is met.
• Develop the Technical Service business plans and department’s operations and budget development which in line with Performance Coatings' strategy.
• Provide detailed reports to management on the organisation/utilisation and efficiency of the team.
• Build up and enhance relationship with key customers.
• Ensure company policies and new technical information is properly informed to the organisation.

Qualification:

• Bachelor's Degree with minimum 3 years of relevant experience in Technical Service Management.
• At least 3 years of people management experience.
• Proficient in verbal and written English.
• You have strong communication skill and a team player.

Personal Qualities:

• Acts on own initiative, makes things happen and accepts responsibility for the results.
• Provides team with a clear sense of direction, inspires and coordinates others and keeps them focused on objectives.
• Develops people through delegation, empowerment and coaching; promotes career and self-development.
• Uses a methodical and systematic approach; plans ahead, defines clear priorities and allocates resources effectively.
• Demonstrates specialist knowledge and expertise in own area; participates in continuous professional development.
• Adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results.

What We offer:

• Competitive compensation and benefits
• Continuous learning opportunities and training activities through on-the-job training and our in-house learning Jotun Academy.
• Career development opportunities across multiple disciplines and geographies
• Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores
• A supportive and inclusive company culture where you can be your authentic self
• A focus on having fun together through team buildings and social activities

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Instructional Designer /Technical Writers to join hands with highly talented product development teams in producing documentation for the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the CloudAz XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We are looking for a talented Instructional Designer/Technical Writer to develop and implement effective product and implementation training courses for our award-winning Information Risk Management products. You will be responsible for creating engaging and educational content that will support our customers, from administrators and end-users to developers and IT architects. Join a rapidly growing company that delivers solutions for an increasingly critical component of information technology.

Acting as owner for all product documentation in your area, your core responsibility will be to document product and implementation training courses and keep pace with our rapid software development lifecycle. You will also participate in design, review, and testing cycles, playing the role of anticipating the impact of new products and technologies for our users. The team here is genuinely excited about our cutting-edge products. We are seeking a candidate who shares our enthusiasm and commitment to excellence.

Responsibilities

• Design and develop interactive and engaging training content, including e-learning modules, instructor-led training materials, and user manuals.
• Collaborate with subject matter experts SMEs to gather information and ensure the accuracy of training content.
• Develop comprehensive training programs that cover product features, best practices, and implementation strategies.
• Write clear, instructional content tailored to diverse audiences, including administrators, developers, and end-users.
• Create supporting material/media (audio, video, simulations, games and so on).
• Learn and deepen your knowledge of NextLabs products and integrated third-party products.
• Manage the lifecycle of training projects, ensuring timely delivery and alignment with product updates and releases.
• Utilize various learning management systems (LMS) and technical writing tools to deliver training content.
• Evaluate the effectiveness of training materials and make improvements based on feedback and performance metrics.

Required Skills

• Bachelor's degree/Diploma in Computer Science, Information Technology, or a related field.
• At least 3 years’ experience in developing instructional materials for enterprise software applications.
• Ability to write clear, succinct and accurate documentation, including conceptual information and procedural instructions for administrators, developers and end-users.
• Ability to work independently with minimal supervision.
• Ability to ramp up quickly on new technologies.
• Excellent interpersonal communication skills and ability to work with globally dispersed teams.

Desired Skills

• Knowledge of instructional design theories and best practices.
• Familiar with tools for generating LMS content and training courses.
• Experience developing training courses for applications in the Cloud.
• Knowledge of risk management or identity management software products is a plus.

Interested candidates may send resume to [email protected] or use our online form.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possess own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road
• 5.5 work day

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Are you a detail-oriented individual with a knack for organization and a passion for supporting a thriving team?

We are looking for a Corporate Admin Support to join our vibrant and fast-paced environment. This role is perfect for someone who loves to keep things running smoothly and enjoys being the backbone of a successful team.

Responsibilities

• Assist in managing the end-to-end new hire induction experience
• Scheduling and coordinating meetings, and preparing minutes that capture all the important details.
• Track and monitor key tasks and top talent
• Support performance management implementation
• Consolidate monthly reports and track data
• Upkeep organizational charts and appointments
• Take on ad hoc duties with enthusiasm and a can-do attitude, always ready to lend a helping hand.

Requirement :

• A minimum of Diploma or equivalent, with a strong foundation in administrative tasks.
• Proficiency in Microsoft Office Tools, especially MS Excel and power point a must , to handle data and create reports with ease.
• A team player with excellent communication skills, capable of interacting with people at all levels and building strong working relationships.

Why You'll Love Working With Us:

• Be part of a supportive and collaborative team that values your contributions and encourages your growth.
• Enjoy a dynamic work environment where no two days are the same, and there's always something new to learn.
• Take pride in knowing that your work directly supports the success of our team and organization.

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Assist Job Manager to attend to technical and design issues at site and report issues to Job Manager
• Provide standing supervision as and when directed by the Consultant team.
• Check through construction drawings and highlight any discrepancies found between or within the same disciplines prior to the commencement of installation works.
• Ensure all works are carried out in accordance to approve drawings and specifications.
• Ensure adequate safety precautions are enforced on site.
• Resolve all site issues and ensure timely completion of the project.
• Attend site meetings, site inspections, testing and commissioning.
• Maintain site records.
• Estimated commencement of work in February 2025

Job Requirements:

• ITE certificate / Diploma in Civil Engineering from a recognised tertiary institution.
• Accredited with IES-ACES Joint Accreditation Committee (JAC) with valid RTO Practising Certificate
• Minimum 5 years’ working experience as a Resident Technical Officer.
• Preferably with experiences in in additions and alterations of buildings/Commercial Developments.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application.

About Our Company

Established in 1991, Gan Teck Kar is a privately-owned company started by food-loving folks who are passionate about bringing the finest products from all around the world. Our core business is the importation and distribution of premium food products to Singapore and Malaysia with business partners all around the Southeast Asian Region.

Job Highlights / Benefits

● Free meals provided

● In-house gym

● Staff discounts

● Walking distance from Tuas Link MRT

Title:

E-Commerce Sales Support

Reports to:

Sales Manager

Introduction:

We are looking for a dynamic individual to support and drive our company’s e-commerce business for multi-brands across different marketplace platforms and online buyers.

Responsibilities:

• Responsible for the overall e-commerce sales on Shopee, Lazada, Amazon and Shopify.
• Responsible for daily e-commerce operations, including uploading and monitoring product information on the platforms.
• Ensure timely execution of order process management.
• Update stock count, monitor shipment & delivery of orders, assure on-time deliveries and update systems accordingly.
• Provide customer service to support the sales growth.
• Attend queries, resolve any concerns on their orders with minimum TAT, maintain accurate and timely records of correspondences or discussions with customers.
• Prepare monthly summary sales reports.
• Plan and execute e-commerce promotion campaigns.
• Work with in-house designers to prepare promotion banners, category banners and campaign artwork.

Requirements:

• Energetic, collaborative and results-oriented person with 1-2 years of sales experience in FMCG. Experience in handling e-commerce platforms is a bonus.
• Possess at least a Diploma in any field.
• Self-starter who is technologically savvy, organised and able to operate well in a team under pressure.
• Possess good analytical skills to evaluate sales reports to build competitive sales strategy and promotions for each platform.
• Proficient in Microsoft Office Suite (Excel, PowerPoint, Word).

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Roles & Responsibilities:

To assist in ensuring the smooth operation of site activities

To provide logistical support (site utilisation) when needed, as requested by sub-contractors

To be the liaison for the coordination of different trades within the same discipline

Responsible for all on-site engineering issues pertaining to site matters

To assist in coordinating with sub-contractors and attend to clients' queries to ensure timely work arrangements

To be involved in the day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule and the local authorities’ quality standard

To assist in managing project documentation and maintain accurate records

Ensure compliance with all health and safety regulations

Requirements:

Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification

Experience or knowledge in Bridge Construction/Crosshead/Lifting Frame/Launching Gantry Operation/Pre-cast Segment Method/MRT/LTA will be an advantage

More than 3 years of site experience in the Construction sector, preferably in superstructure crosshead/precast segmental bridge and Launching Gantry operation or similar

Good team player and able to work independently

BCSS certificate

JOB RESPONSIBILITIES:

• Perform Stamping die set design according to product specification & requirement
• Carry process layout discussion & confirmation with R&D & production team
• Perform 3D CAD construction for complex shapes Profile Punch & Die
• Work as a team & perform tool testing with tester to achieve tooling FA timely
• Carry out further tool improvement during initial production period to stabilize tool condition

JOB REQUIREMENTS:

• Diploma / ITE in Mechanical Engineering, Precision Engineering or related disciplines
• Experience in metal Stamping Designing is needed
• Proficient in 2D & 3D AutoCAD or others CAD applications
• Be able to work independently & work under pressure
• Willing to perform overtime

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan