The Crisis Support Executive (CSE) in the Crisis Support Team supports the work of the Core Services by conducting initial assessment of clients’ risks and needs. This includes classifying of incoming calls, emails and text messages according to the risk levels. He/she decides the required follow up actions, which typically include referring of cases to the Clinical Team for crisis support or counselling.

CSE also makes preliminary outgoing calls, emails or text messages, if necessary, to facilitate the initial assessment in terms of client risk level. He or she provides frontline support to volunteers who are manning the organization’s 24-7 hotline service.

Duties and Responsibilities:

• Conduct initial assessment and classify incoming calls, emails and text messages according to the risk levels. Scope of work includes:

1. Classify calls, emails, text messages on the system
2. Make outgoing calls, emails or text messages where necessary to facilitate assessment
3. Provide first level response to low-risk clients where necessary
4. Provide information on SOS services or on community resources to third party callers
5. Support in the administration and documentation of the processes
6. Refer cases to the Clinical team for follow up actions/ crisis support interventions
7. Coordinate on the activation of emergency support where applicable

• Frontline support to volunteers (SAMs) who are manning the organization’s 24-7 Services. Scope of work includes:

1. Assist with phone or chat duties in the event of shortage of volunteers
2. Being activated onsite to support persons in crisis or next-of-kins
3. Support in training and supervision of trainee volunteers
4. Orientate and guide new volunteers who have just started performing call or messaging duties on their own
5. Support and guide volunteers in the Phoneroom or over online platforms by listening in during calls or monitor chats and provide consultation where appropriate
6. Conduct debrief sessions with volunteers where necessary, especially for those who handled calls or chats with imminent risks and experienced distress as a result
7. Update volunteers on callers’ or clients’ development
8. Provide off-site support for volunteers outside of office hours where necessary

Educational Qualification:

• Diploma or equivalent in Social Work, Psychology or in Counselling (preferred)

Relevant Experience:

• On-the-job training available
• At least 1-2 years of experience in the Social Service Sector (preferred)
• Understands the Social Service landscape (preferred)
• Experience in volunteer management or volunteered with other SSAs or hotline operation (preferred)

Behaviour Traits & Attitude:

• Self-motivated
• Good team player
• Possess good interpersonal communication skills
• Willing to perform shift work which includes evenings, overnights, weekends and on public holidays (mandatory)
• Strong analytic and problem solving skills (preferred)

• Manages a team

• Achievement of sales targets set by the company. i.e. New and re-contract, Fibre and Digital TV through voice and digital support channels

• Develop effective Sales pitches based on promotion, policies, and product updates.

• Resolve escalated complaints from customers, customer service, the sales support team, and other sales streams.

• Assist customer Sales queries through different platforms primarily on video chat, Chat, Outbound, and Inbound.

• Require to meet Client on-site at times with Telco Partner for sale negotiation

• Training will be Provided

Requirements:

• At least 6 months to 1 year of experience in sales.

• Confidence in sales through traditional voice and digital sales support channels

• Customer service-oriented, target driven, and challenge seeking

• Ability to build rapport with customers and understand their needs

• Effective interpersonal skills. Able to relate well to people at all levels

• Good communication and listening skills and ability to build rapport and trust with customers

• Lively, energetic, dynamic individual with a friendly disposition

• Able to perform in a fast-paced environment and work under pressure

Looking for candidates who are expereinced in the mantinance and management of day-to-day opertation of PABX (Private Automatic Branch Exchange) systems, Telephony systems, voice servers, gateways, phones and multi-media interaction systems.

• Coordinate and work with vendors on telephony infrastructure and trunk services
• Perform preventive maintenance of telephony systems
• Conduct reviews and feedback on the maintenance
• Manage ad-hoc maintenance job
• Support on customer exercise
• Server / SAN / network hardware troubleshooting and replacement
• Operating system / software troubleshooting
• Hardware spares preparation and management
• Hardware obsolescence management
• Support customer regular system audit

Requirements

• Degree holders in Computer Science, Computer Engineering, or Electrical and Electronics Engineering or equivalent.
• Minimum two years’ experience in IT systems and preferably three years’ experience in hardware installation and deployment.
• Minimum 1 year of Computer System engineering (System configuration, Network system and System backup) knowledge.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Location: North, Singapore

Experience: 3+ yrs

Domain: Electronics/Urban Solutions

Mode: 1 Year contract under us, extendable

Monthly Salary: around S$ 5000-6200

Must: Singaporean / SPR / PLOC / LTVP+ / DP

Interview rounds: 1

Availability: Immediate – 30 days

Job Description:

1. Architect and develop a robust, scalable, and secure NVR system.

2. Implement and ensure compliance with the ONVIF protocol for seamless integration with a variety of IP cameras and devices.

3. Configure and manage HTTPS servers to secure communication channels for NVR services.

4. Manage RTSP streams for real-time video recording, playback, and streaming functionalities.

5. Design and implement efficient storage solutions, including support for local storage and NAS

6. Ensure the system adheres to high-security standards, including encryption, strong authentication, and regular updates to mitigate vulnerabilities.

7. Create detailed technical documentation and provide support for troubleshooting and system maintenance.

8. Ensure that implementation conforms to the coding standards and engineering processes.

Qualifications:

1. Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, or a related field.

2. Minimum of 3-7 years of experience in software development, with a strong focus on NVR systems.

3. Proficiency in programming languages such as C/C++, Python, or Java.

4. In-depth knowledge of network protocols and technologies, including TCP/IP, HTTPS, RTSP, and ONVIF.

5. Experience with setting up and managing HTTPS servers, SSL/TLS certificates.

6. Strong understanding of video compression and streaming technologies (e.g., H.264, H.265).

7. Expertise in Linux, including kernel configuration, scripting, and system administration.

8. Familiarity with database systems and data management for video storage and retrieval.

9. Excellent analytical and problem-solving skills, with the ability to troubleshoot complex system issues.

10. Proven ability to lead a project, work collaboratively in a team environment, and mentor junior engineers.

Additional Skills (Advantageous):

1. Relevant certifications in network security, ONVIF compliance, or video surveillance technologies.

2. Experience with video management systems or AI-based video analytics

3. Experience in leading NVR development projects.

Location: North, Singapore

Experience: 3+ yrs

Domain: Electronics/Urban Solutions

Mode: 1 Year contract under us, extendable

Monthly Salary: around S$ 5000-6000

Must: Singaporean / SPR / PLOC / LTVP+ / DP

Interview rounds: 1

Availability: Immediate – 30 days

Job Description

• Responsible for product specification and characterisation of rail products

• Responsible for regulatory compliance documentations

• Drive product reliability and quality improvement

• Execute RCA process to troubleshoot, root cause issues and drive implementation of corrective measures

• Develop and maintain knowledge database of lessons learnt

• Develop test methods and conduct verification tests for rail products

• Develop and maintain product requirement documentation

• Resolve product issues with development team and quality team

• Involve in First Article Inspection (FAI) and product compliance tests

Requirements

• Degree in Electronics Engineering with at least 5 years in design or product engineering

• Good working knowledge of product engineering and manufacturing process

• Good working knowledge of product validation test methods and RCA methods

• Knowledge of standards, REACH, RoHS, EN 50155, EN 50121-3-2, EN 61373, EN 60068, EN 45545-2, is an added advantage

• Able to read schematic, PCB layout and mechanical drawings

• Capable of independent judgement and creativity in problem solving

• Strong organisational skills and attention to detail

• Strong written and verbal communication skills

• Strong personal work ethics

• Able to work well independently and with cross functional teams

• Able to monitor and drive issues to closure in timely manner

• Able to work in deadline-oriented environment

• Willing to take up extra responsibilities

Location: North, Singapore

Experience: 4+ yrs

Contract: 1 Year, extendable

Monthly Salary: around S$ 5500-6200

Note: 1 month bonus will be paid along with the 12th month salary

Must: Singaporean / SPR / PLOC / LTVP+

Availability: Immediate

Interview rounds: 1

About the Job:

We are seeking a passionate and innovative software engineer to join our team in Electrical & Industrial Solutions Group Center of Excellence (EISG COE) to launch the next generation software solution for future enterprise engagements. As a software expert engineer, you will be the critical contributor of solution framework knowledge in developing and integrating multiple software products to create solutions. You must be a proven expert with experience designing, implementing, and deploying end-to-end solutions.

About the Team:

You will work closely with strategic planners, product management, and customers to understand key challenges and create solutions that advance this position as a market leader in measurement test.

Responsibilities:

· Lead architectural design and system level integration, interfaces, and test requirements for our client’s board test and measurement software.

· Work to outline end-solution and develop work breakdowns by shippable epics, milestones and ultimately work with leads on sprint deliverables.

· Set the technology direction for major components and services; work hands-on to integrate them into our measurement test software.

· Partner with internal and external stakeholders to understand requirements and translate them for the development teams.

· Work closely with various software teams in the development of the common building blocks

· Effectively communicate and interact up and down across the cross-functional teams and organizations.

Basic Qualifications:

· Bachelor/Master Computer Science/Electrical/Electronic Engineering or a software related discipline, from an accredited college or university

· Minimum 5-8 years’ experience working with product design/development/engineering and product management.

· Proven track record to do what it takes to deliver our products to customers on schedule.

· Excellent written and verbal communication skills are a must.

· Knowledge with basic electronics principles, board testing technology, IEEE boundary scan standards and programming algorithms is an added plus.

· Experience in design, implementation and deployment of software that support multiple platforms (Windows, Linux and MacOS)

· Well-versed in modern techniques in object-oriented design, design patterns and measurement libraries

· Expert working knowledge of application development using C, C++ 11/14

· Familiar with application development using Objective-C, Xcode, X Window (X11)

· Knowledge in RestAPI, gRPC, microservice technology and containerization

· Solid understanding of Jenkins CI/CD development flows and tools such as Microsoft Visual Studio, TFS, SharePoint, Git, Bitbucket, JIRA, Confluence or equivalent for cross platforms

· Experience in reengineering and migrating legacy software solutions to modern technology platform is an added plus.

(EAST RERGION)

Roles & Responsibilities

• To study Lift and Escalators equipment specifications and prepare layout drawings based on the confirmed product specifications.
• To prepare, modify or assist in the design drawings and resolve design problems.
• To be involve in discussion with Consultant in Structural / Architectural details.

Job Requirement

• Diploma in Electrical Engineering, Electronics Engineering or Mechanical Engineering or related discipline.
• At least 1 year of proven track record using AutoCAD and Building Information Modeling (BIM).
• Proficient in MS Office.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

(WEST REGION) - Toh Guan Road

Summary:

To plan, co-ordinate and perform inspection works on newly installed and existing equipment under maintenance contracts.

Responsibilities:

• Assist the manage/senior engineer in ant techincal aspect of the equipment
• Carry out inspection on newly installed equipment and equipment under maintenace
• Attend to safety and performance-related breakdowns of equipment
• Planning and implementation of new measures to improve performance of equipment
• Investigate and submit report on the technical failures of equipment
• Act as calibration committee member when assigned by senior manager and to ensure all instruments within the department are properly documented and calibrated
• Assist in technical training of subordinates within the department
• Any other duties as assigned by superior

Requirements:

• No experience required
• At least diploma in engineering
• Triple E certs
• Microsoft Words, PowerPoint and Excel skills such as creation of table and analysing of data
• Good communication skills
• Able to work independently
• Willing to learn

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Job Description:

• Responsible for the design and implementation of CI/CD toolsuite
• Maintenance of the CI/CD toolsuite and patching schedule
• Work closely with the software engineers to automate their deployments and improve productivity
• Work closely with the enterprise architects and IT security team to ensure compliance to their requirements
• Troubleshooting of deployment errors, perform root cause analysis and implement corrective actions

Requirements:

• At least 4 years of experience working as a DevOps Engineer or similar software engineering role
• Experience working with at least one of the CI/CD tools such as Jenkins, Octopus, ArgoCD
• Experience in setting up and managing Kafka based applications is a must
• Knowledege of setting up and managing observability tools
• Implementing code quality pipeline and frameworks
• Good understanding of CI/CD best practices (environmental variable replacement strategies etc)
• Good understanding of containerization tools (Docker) and usage of image repositories
• Knowledge of container orchestration tools will be a bonus (Kubernetes)

Interested applicants please submit your resume to [email protected] or click Apply Now button.

We regret to inform that only successful applicants will be contacted. Thank you.

Claudia Kueh Kee Jinq (R1880247)
Manpower Staffing Services (S) Pte Ltd
EA License No: 02C3423

We seek a Data engineer to support our high frequency trading activities and quantitative research. At Grasshopper we recognise that effective research and trading strategies are built upon solid foundations in the collection, storage, and service of data. Grasshopper trades at a number of exchanges globally and we are looking for an experienced engineer interested in working with terabytes of data to join our team.

As a Data Engineer, you are expected to build data pipelines that efficiently and reliably process and transform data captured across various systems as well as to design and implement storage solutions for enabling users to generate valuable signals and insights. You’ll have a chance to work with Google Cloud technologies, Scala, and possibly introduce a new solution yourself if you can make a case for it.

Responsibilities

● Implement, monitor, and maintain data pipelines for market, transaction, reference, and other
data.
● Perform all needed data cleansing and transformation to improve data quality.
● Work closely with traders and researchers to consume and analyze data faster and more
efficiently.
● Deploy new data models that provide insightful and actionable analytics across the firm.
● Manage the entire data processing system and advising of any necessary infrastructure changes.

Skills and Knowledge Required

Attributes
● Thinks clearly, learns quickly, solves problems, and can work with no supervision.
● Asks good questions. Communicates effectively.
● Development experience in more than one programming language, preferably different (e.g.
strongly versus dynamically typed, functional versus object-oriented).
● Familiarity with software development practices. Works well in a team.
● Experience with databases and SQL.
● Experience with stream processing.

Good to have
● Knowledge of electronic trading and tick data
● Knowledge of data modelling and database design.
● Experience of data processing/ETL implementation.
● Experience with distributed systems.
● Experience with messaging middleware such as Solace or Kafka.
● Experience with (NoSQL) databases such as Hadoop, Cassandra

Qualifications

A good degree with a focus on Data Engineering or the equivalent.

Responsibilities:

• RFQ for mechanical, electro-mech commodity; per customer specification or propose alternatives
• Quote Leader for assigned customers, responsible for cBOM submission
• Cost reduction and alternate sourcing program for new and existing projects
• Supplier base management covering Quality, Delivery, Cost and Contract finalization
• Liaise with suppliers and internal departments for First Article Approval
• System set up for approved parts and suppliers
• Project management
• Able to read technical drawing / specifications
• Contribute to the company risk management process in accordance with your position and duties / responsibilities
• Perform any other ad-hoc duties as assigned by your immediate supervisor

Requirements:

• Diploma/ Degree in Electronics/Mechanical/ Mechatronics Engineering
• Proficient in Microsoft Excel, Power Point,
• Preferably with Oracle and/or SAP module knowledge
• Basic mechanical / mechanical components knowledge preferred

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Job brief

We are looking for a qualified Network Engineer to install, maintain and repair hardware and networks. You will be the one to ensure that adequate IT infrastructure is in place and is used to its maximum capabilities.

As a Network Engineer you must be well-versed in computer systems and network functions. The ideal candidate will be able to work diligently and accurately and will possess a great problem-solving ability in order to fix issues and ensure functionality.

The goal is to install and maintain high quality networks and computer systems. The role will potentially grow into database management specialist.

Responsibilities

· Set up hardware and familiar with the installation, configuration, and maintenance of Windows operating systems, including management and monitoring of servers and domains.

· Proficient in setting up and managing common database systems such as MySQL, SQL Server, etc., with additional expertise in advanced SQL functions, query optimization, and database performance tuning, and possess the ability to optimize and perform backup and recovery for databases.

· Install well-functioning LAN/WAN and other networks and manage components (servers, IPs etc.).

· Maintain and repair technological equipment (e.g. routers) or peripheral devices; Possess basic knowledge of networking, including TCP/IP protocol, LAN and WAN network configuration, as well as setting up and troubleshooting network devices.

· Manage security options and software in computers and networks to maintain privacy and protection from attacks.

· Perform regular upgrades to ensure systems remain updated.

· Troubleshoot system failures or bugs and provide solutions to restore functionality.

· Arrange maintenance sessions to discover and mend inefficiencies.

· Keep records of repairs and fixes for future reference.

· Offer timely technical support and teach users how to utilize computers correctly.

Requirements and skills

· Proven experience as Network Engineer or similar role.

· Experience with LAN/WAN networks.

· Thorough knowledge of computer systems and network components.

· Good knowledge of internet security and data privacy principles.

· Excellent troubleshooting skills.

· Very good communication abilities.

· Pressure resistance and capability for multi-tasking.

· Exceptional organizing and time-management skills.

· BSc/BA in Computer Science, engineering or relevant field.

Key Responsibilities: Support the Head of Technical and Compliance in reviewing and monitoring that Financial Statements Audit and Assurance Engagements within the firm, as well as firm-wide policies, processes, and procedures, comply with all applicable Pronouncements, including International Standards on Auditing (ISA), International Financial Reporting Standards (IFRS), International Code of Ethics for Professional Accountants (IESBA), International Standards of Quality Management (ISQM), corporate regulations, and other authoritative pronouncements.

Candidates for this role will be supporting the firm’s technical department in achieving the following outcomes:

• Establishing policies and procedures within the firm to ensure compliance with the above Pronouncements.

• Implementing and monitoring the Firm’s program to compliance with ISQM.

• Planning and conducting risk assessments and quality control reviews on engagements, to ensure compliance with the above Pronouncements.

• Validating that controls established by the Firm to comply with the Pronouncements are operating effectively and timely.

• Analyzing and identifying gaps, and potential areas of improvement, in quality control procedures within the Firm to ensure compliance with the above Pronouncements, and proposing remediation plans.

• Conducting real-time reviews of financial statements audit and assurance engagements before audit opinions are signed.

• Carrying out root cause analyses and monitoring effectiveness of action plans to address areas of weaknesses identified.

• Training, coaching, developing and cultivating technical competencies to ensure capability of designated employees to maintain and comply with the Pronouncements.

• Preparing and collating information/reports for regulatory and internal reviews and handle any related coordination work.

Requirements:

• Bachelor’s degree in accountancy or other relevant disciplines.

• Minimum 8 years’ experience in an audit and/or quality role, within a Public Accounting firm.

• Candidates with experience in similar quality management roles are preferred.

• Excellent presentation, written and verbal communication skills to communicate across all levels of staff and management.

About Grasshopper

Grasshopper is a prominent technology provider headquartered in Singapore. We uphold core values of honesty, integrity, and teamwork, guiding our future success. Our cutting-edge, in-house technology places us at the forefront of electronic trading advancements.

As a Staff Engineer on the Infrastructure Team, you will play a large role in advancing our research and batch computing capabilities. You will work closely with cross-functional teams to architect, develop and maintain scalable solutions on our Google Cloud and our on-premise Infrastructure.

As a Staff engineer, you should be able to meet the following requirements:

• A background in either a high-frequency trading (HFT) or Research environment, preferably involving research and/or backtesting platforms.
• A good understanding of Kubernetes, encompassing both architectural design and operational management.
• Proficiency in GitOps principles, specifically with tools like Argo-CD and GitLab CI.
• Workflows (argo workflows) and batch/HPC type workloads
• Strong grasp of cloud infrastructure, with practical experience in either AWS or GCP.
• Take initiative in investigating infrastructure/application issues on a live production system independently
• Proficiency in programming languages such as Python or Go.
• Good interpersonal and collaboration skills

It will be highly useful if you have prior experience in the following technologies:

• Previous exposure to K8s operators.
• Prior knowledge and experience in on-premises bare metal environments.
• Proficiency in containerisation technologies.
• Familiarity with configuration management tools such as Puppet, Chef, or Ansible.
• Understanding of security principles from both operational and implementation perspectives.
• Experience with Argo-CD and Argo Workflows for workflow automation.
• Knowledge of monitoring tools like Prometheus and the ELK stack (Elasticsearch, Logstash, Kibana).
• Familiarity with RedHat and CentOS-based Linux distributions.
• Prior contributions to open-source projects.
• Experience with CI tools like Gitlab CI and Jenkins for continuous integration and deployment.

Qualifications

• At least 8 years of solid background in Platform/SRE engineering.
• Excellent written and verbal communication skills with an eye for detail.
• Strong entrepreneurial spirit and the ability to adapt to changing requirements and technologies.
• A passion for learning and inventing new approaches to hard problems

What we offer:

• 21 days annual leave
• An opportunity to learn from experienced professionals, fostering mentorship opportunities and personal growth
• Comprehensive Insurance Package with extended coverage for dependents
• Well stocked pantry
• Annual Dental & Wellness budget
• Gym membership
• Employee bonus referrals

What you can expect working at Grasshopper:

At Grasshopper, you will be working in a diverse and dynamic environment. With more than 15 nationalities working in an open office, communication is essential to performance. We give employees a high level of autonomy and encourage them to get creative, take risks, make mistakes and learn from them. The sprint is on!

Grasshopper is an equal opportunity employee.

Our client is currently expanding their presence in Singapore and have made a name for themselves as a security solution provider fulfilling security and operational objectives. As the organisation is growing, they are committed to developing their people with continual career development training.

They are looking for Corporate IT Engineer to join their growing team.

Responsibilities:

• Configure physical network devices during capacity buildouts
• Set up automated monitoring of physical network devices
• Set up automated alerting based on monitoring for physical network devices
• Write automation scripts to safely update the configuration of physical network devices
• Cut tickets to Data Centre operations for a variety of tasks: check cable, replace a line card, replace a faulty device, decommission a device, etc
• Update the firmware (operating system) of physical network devices
• Maintain the logical access security for physical network devices
• Responds to live site incidents involving physical network devices
• Provide evidence to auditors on the logical security of physical network devices

Requirements:

• Preferably 3 years or more of Networking Engineering experience working with Layer 2 protocols, Layer 3 networking with IP, as well as routing protocols such as OSPF/IS-IS, BGP, and MPLS
• Experience troubleshooting across a variety of networking platforms including, but not limited to, Cisco, Dell, Palo Alto, Fortigate and Arista
• Strong scripting skills (Phyton, PowerShell and C# are preferred, but not a strict requirement) for automating day-to-day tasks are a strong plus
• Highly effective written and oral communication skills
• A strong collaborator, attentive listener, calm under pressure, earn confidence from others and be adaptive, since a candidate’s role may span a variety of traditional roles, such as design engineer, deployment engineer, operations engineer and project manager

• Support implementation of new systems and system changes.
• Manage IT assets and IT systems in terms of supporting, troubleshooting and administration.
• Ensure new PCs are set up in accordance with Company’s policies.
• Support in Cybersecurity matters e.g. PC hardening.
• Work with different stakeholders including internal and external parties e.g. equipment suppliers for IT systems’ hardware and software matters.
• Involve in Disaster Recovery Exercises for various systems.
• Perform other related duties as assigned by management.
• Implement changes to systems after office hours including Sundays (when required).

Requirements

• Minimum Diploma in Computer Science/Engineering, Information Technology or related fields.
• Minimum of 2 years of hands-on experience in IT system support role.
• Proficient in Microsoft Office 365 and computer knowledge.
• Knowledge in AWS cloud, network setup and programming language will be an advantage.
• Possess good attitude, time management, and coordination skills, as well as strong communication and interpersonal skills and ability to learn new/latest technologies
• Able to work well independently or in a team environment.

Tempserv Pte Ltd

License No: 06C3745

Ivy Ng Siew Hoon I EA Reg. No : R1102590

Overview: We are seeking a talented and experienced Quality Engineer to join our team to help with Automation via Selenium. The ideal candidate will be responsible for designing, developing, and executing automated tests to ensure the quality and functionality of our web applications. This role requires a deep understanding of Selenium, JIRA, test automation frameworks, and software development life cycles.

Key Responsibilities:

1. Test Automation Development:
   Design, develop, and maintain automated test scripts using Selenium.
   Create and implement comprehensive test automation frameworks.
   Integrate automated tests with JIRA and Continuous Integration/Continuous Deployment (CI/CD) pipelines.
2. Test Planning and Execution:
   Develop detailed, comprehensive, and well-structured test plans and test cases.
   Execute automated test scripts and analyze results to ensure software quality.
   Identify, record, document, and track bugs using bug tracking tools.
3. Collaboration:
   Work closely with software developers, QA analysts, and product managers to understand product requirements and functionality.
   Collaborate with DevOps and development teams to optimize the automation processes.
   Provide feedback and recommendations to developers on software usability and functionality.
4. Continuous Improvement:
   Stay up-to-date with the latest industry trends and best practices in test automation.
   Continuously improve and refactor automated test scripts and frameworks.
   Mentor and support junior QA team members in test automation techniques and best practices.
5. Application Support and Improvement:
   Able to support application improvement through:
   Review and support refactoring and optimization of application
   Architect and implementing a data schema

Qualifications:

• Education:
  Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:
  2+ years of experience in test automation using Selenium.
  Experience with programming knowledge such as Java, Python, or C#.
  Proven experience in developing and implementing test automation frameworks.
• Technical Skills:
  Proficient in Selenium and test automation tools.
  Understanding of software testing principles, methodologies, and best practices.
  Experience with version control systems like Git.
  Familiarity with JIRA and CI/CD tools.
  Knowledge of web technologies (HTML, CSS, JavaScript), message broker (rabbitMQ) and databases (SQL, NoSQL).
• Soft Skills:
  Excellent problem-solving and analytical skills.
  Excellent communication and collaboration skills.
  Ability to work in a fast-paced and agile development environment.
  Detail-oriented with a passion for delivering high-quality software.

Interested Applicants, please email your resume to [email protected] (R1767650), stating the position as the subject title in the email. All Applications will be handled with strict confidentiality.

RED an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.

We now seek an experienced Graduate Engineer (Mechanical / Electrical / Building Services) to be based in our Singapore office to inspire others. You will have the ability to run small and large sized projects, undertake a client facing role in the development, design, and co-ordination of engineering projects You will have experience in the delivery of data centres along with other sector experience including commercial, hotel, retail, and hotel design desirable.

Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio.

You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel / hospitality and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work ‘hands on’.

Electrical Graduate - (Mechanical / Electrical / Building Services)

Job Description

• Undertakes project work, taking delegated responsibility for the preparation of engineering designs for Mechanical or Electrical installations, systems, e.g. sizing of pipes for ventilation systems, hot & cold-water equipment, facilities etc
• Data manipulation of original drawings according to specification revisions
• Carries out independent reading and research to support drawing/specification accuracy
• Liaison with various contractors re designs and co-ordination of installations
• Ensures document control requirements are fulfilled prior to issue by making sure drawings have correct titles etc and are in correct order
• Advanced Graduate (1-2 years exp): Preparation of specification modifications (word or excel)

Skills/Qualification

• Postgraduate/Undergraduate in BSC/BEng (or equivalent) in appropriate engineering discipline
• Working towards MCIBSE/MIEE or equivalent
• Basic working knowledge of CAD functionality
• Basic understanding of key Health and Safety issues and legislation
• Knowledge of MS Office applications word, excel etc
• Ability to use IT based calculation and spreadsheet software
• Basic understanding of BS standards
• Ability to prioritise own workload
• Ability to work to deadlines

If you think you have what it takes to join an award winning team and excel RED to continue its exciting journey, we want to hear from you!

JOB SUMMARY

A critical member of the team, the Service Technician balances a passion for people, a broad technical expertise, and excellence in retail practices.

A Service Technician is the front line and point person for our brand to the rider and encourages successful, profitable retail by taking their technical expertise to the next level as a driver of outstanding in store brand experiences. A Service Technician works directly with riders, both present and remote, to identify and locate the goods, services, and experiences needed to provide solutions quickly and frictionlessly to keep them riding longer and better. Service Technicians work collaboratively and hands-on with staff and local riders as a host, mentor, brand advocate, and technical service ace. The Service Technician provides exceptional rider service; enhances rider satisfaction; and aids in meeting sales and profitability goals.

HOW YOU’LL MAKE A DIFFERENCE

• Meeting and making a connection with riders, asking qualifying questions and listening to riders' needs, then giving options and advice on meeting those needs from a pre-set service menu or tune ups and a la cart service.

• Contribute to the larger Specialized R&D team by closing the feedback loop; providing insights from both the technician's perspective and remitting valuable critique and reaction from our riders.

• Speak authoritatively on technical matters as they relate and pertain to our bicycles; be the expert

• Assists customers in an enthusiastic and courteous manner; provides “wow” customer service.

• Responsible for properly taking in all service work and setting and exceeding rider expectations, including correctly filling out service work orders, scheduling an appropriate number of repairs

• Advises and assists customers with their product/service selection without bias.

• Develops and maintains knowledge expertise of all merchandise in department to effectively assist customers with accurate information; keeps current as new product lines are introduced.

• Assists with bike sales with technical consulting, and any other bike floor duties as needed.

• Deliver best in class rider-service that ensures ongoing service and high levels of rider satisfaction

• General cleanliness standards are set at store opening, maintained throughout the day, and reset at close of business, including light janitorial duty

• Proficiency in point of sale systems and store operational websites

• Regular, dependable attendance and punctuality

WHAT YOU NEED TO WIN

• Passion for cycling and the Specialized brand

• Excellent communication with the ability to effectively interact with riders and team members

• Must be able to work as business dictates which includes weekends

• Ability to stand for extensive time periods; while occasionally walking, kneeling

• Opportunity to work with emerging technologies
• Collaborative team environment
• Singapore-based permanent headcount

Our client is a leading digital asset trading firm that manages the proprietary investment and trading strategies with a focus on derivatives, arbitrage, and quantitative strategies.

Responsibilities:

You will be mainly responsible for the design, implementation, and maintenance of the company’s AWS infrastructure. You will get to work closely with cross-functional teams to ensure the security, scalability, and availability of the cloud-based systems.

Part of your day-to-day responsibilities will include, but not limited to:

• Design, deploy, and maintain scalable and highly available AWS infrastructure.
• Implement and enforce security best practices in the AWS environment (e.g. Service Control Policies, Landing Zone, Control Tower, etc.).
• Develop and maintain infrastructure as code (IaC) using tools such as Terraform or CloudFormation.

Requirements:

• 3+ years of relevant working experience as a Cloud Engineer or in a similar capacity.
• Hands-on experience working with AWS.
• Experience with Infrastructure as Code tools like Terraform, CDK, Cloudformation.
• Proficiency in scripting languages like Python or Bash.

Reg No: R23112660
BeathChapman Pte Ltd
Licence No 16S8112

• AWS + VB
• MNC

Job Description

• Review technical specifications from customers.
• Engage customers on technical qualification and identify product development and testing needs of strategic importance.
• Track and analyse the market trend in testing.
• Prepare product development and testing proposal.
• Develop test procedures, monitor test progress and write reports
• Perform FEA and evaluate structural and sealing performance of products.
• Make technical presentation
• Actively participate and involve in appropriate development of HSE matters in areas of hazard / incident identifications, risk assessments and determination of controls
• Ensure work activities and behavior achieved conformity to the HSE policy, objectives and procedures outlined in the HSE management system and compliance to applicable local legal requirements
• In addition to these duties/responsibilities employee is required to carry out all additional duties as & when directed & required.

Requirements:

• Understanding oil & gas drilling and completion is an advantage.
• Strong technical skills in mechanical or structural design and structural testing.
• Strong technical skills in Finite Element Analysis for structural and contact analysis.
• Knowledge in low alloy steels and corrosion resistant alloys and the related specifications (e.g. ASTM, API, NACE).

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Charmaine Tin Zi Jin

EA Personnel Reg No: R23113892

Job Responsibilities

· Co-design the module and SoC design specification

· Responsible for the module RTL design and SoC integration

· Participate in module and SoC verification

· Responsible for RTL link check, synthesis and power analysis

· Participate in FPGA prototype verification

Job Requirements

· EE, Communication, Computes related Major

· More than 2 years experience in digital IC design and RTL coding.

· More than 1 time Tape-out IC project experience

· Familiar with AMBA bus protocol and ARM or RISCV based Architecture

· Prefer to have the experience below (one or more):

· Wireless communication acceleration module design

· SoC low power design

· NoC tools or AMBA designer using experience

· Familiar with one or more protocol of WIFI/Bluetooth/NB-IoT

Job Responsibilities

· Responsible for setting up the verification plan

· Responsible for setting up the module and SoC verification platform

· Responsible for designing test cases according to the test plan

· Responsible for checking the function and code coverage

· Participate in FPGA prototype verification

· Participate in firmware problems debug

Job Requirements

· EE, Communication, or Computes related majors

· More than 2 years experience in digital IC verification

· More than 1 time tape-out IC project experience

· Familiar with UVM methodology

· Familiar with Perl/Python/Tcl language

· Familiar with AMBA bus protocol and ARM or RISCV based Architecture

Responsibilities:

• Plays a critical role in bridging the gap between technical capabilities and cooperate customer needs.
• Understand, design and propose CCTV/IIOT solutions tailored to industrial environments.
• Create technical presentations and proposals for clients.
• Provide pre-sales technical assistance and product education.
• Engage with customers to understand their needs and requirements.
• Work closely with sales teams to identify and qualify opportunities.
• Collaborate with product development and engineering teams to address specific customer needs and feedback.

Requirement:

• Polytechnic or Bachelor’s degree in engineering, computer science, information technology, or a related field.
• Prior experience in a pre-sales or technical sales role, preferably in the CCTV/IIOT industry.
• In-depth knowledge of CCTV systems, including cameras, DVRs/NVRs, and video management software.
• Good understanding of IIOT concepts and familiarity with network infrastructure technologies.
• Understanding of various industrial environments, regulatory requirements and compliance standards related to CCTV/IIOT solutions.
• Ability to analyze complex technical requirements and be strong attention to detail and accuracy in technical documentation and proposals.
• Capability to work under pressure and meet deadlines.
• Able to speak in Mandarin to liaise with our China-based team.

Interested candidates may send their resumes to [email protected], or apply through the application system. Shortlisted candidates will be contacted.

Flamingo Recruitment Pte Ltd

EA License : 21C0588

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

Min 2 years of experience in design & developing software applications using C++/Python

Min 2 years of experience in developing applications using ROS

Proficient in two mainstream programming languages, preferably Python, C++, Typescript, Javascript , etc.

Able to use tools to manage source code, preferably Git, GitHub

Experience of interfacing with different hardware using REST/HTTPS and MQTT communication protocols

Added bonus: Knowledge on Agile & DevOps methodologies

Added bonus: Knowledge on SQL and NoSQL database systems