1. To assist in the overall management and technical operations of the Marine Fleet that includes the preparation, review and management of all technical documentation, vessel certificates, maintenance records, compliance records and etc.
2. Providing the necessary administrative support and coordination for any vessel inspections, repairs and docking works.
3. Assist in liaising with customers on technical and operational matters that inclusive of vessel performance etc.
4. Attending to vessel docking, repairs and surveys when requires and carry out supervision on any contractors' repair / maintenance works on board the vessel.
5. Monitoring the technical status of vessel in term of Class certificates and surveys and ensure that all statutory certificates, equipment certificates, etc, are properly maintained, documented and up to date.
6. To identify and source for technical and operational supplies required for the vessel's need. Coordinate with the suppliers for timely delivery to the vessels.
7. Monitoring and controlling of the vessels consumables to prevent unnecessary wastage.
8. To keep track of the vessels LSA, FFA, cargo hoses registry, lifting gear registry and PPE of all shipboard personnel.
9. Appointed as safety committee member to carry out ool-box meeting for the vessels and attend to vessel inspections.
10. To work closely with the HSE team to ensure the smooth implementation and compliance of company's safety and quality standards.
11. To assist in investigating any defects / failures occurred and reporting all vessel incidents, near misses to prevent and eliminate any potential incidents.
12. To assist in maintaining crew records that inclusive of certifications, training, medical checks and coordinating in crew changes.
13. To undertake any other technical related tasks and assignements as and when required.

Job Requirements:

• Some relevant working experience in similar capacity
• A team player and ability to work in a team enviornment with minimum supervision.
• Ability to Speak Bahasa Indonesia ( to communicate with crew from Indonesia)
• Possess of Class 3 licence will be an advantage
• Must be contactable 24/7 and be available to board the vessels as and when required.
• Proficient in MS Office
• Possess good communication and interpersonal skills

Working Hours: Mon to Fri, 8.30am to 5.30pm

Company Transport near Jurong East MRT

Responsibilities

• Prepares and reviews key project documentation in executing the complete Subsea/Riser interface engineering scope of work as per the project requirements in meeting customer’s expectations
• Prepares and reviews project requirement specification, layout and interface drawings, design studies and other engineering deliverables using engineering common network, software and tools
• Coordinates with other engineering team members (i.e. Yard engineering, basic design and etc.), Equipment designers and Client’s SURF contractors on technical issues and design solutions in meeting project deliverables
• Participates in project meeting, attends to basic technical queries and issues related to subsea/riser interfaces, reviews and be responsible for Riser interface equipment designer deliverables
• Liaises with owners, Equipment designers, SURF contractors, , statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates and reviews the reports on work progress for submission to owners, statutory and classification authorities for approval and maintains project database for future references
• Preparation of technical specification (TS) for complex riser related packages.
• Technical bid evaluation (TBE) of vendor proposals to aid selection of most suitable proposal for the project.
• Reviews Vendor deliverables
• Manages & Liaises with the selected vendor to deliver the package meeting all the project requirements in a safe and cost-effective manner meeting the schedule.
• Provides engineering inputs to commercial, production and project team members on all aspects to procurement, fabrication, installation, testing and commissioning activities

Requirements

• Bachelor's Degree in Mechanical/ Offshore and Marine Engineering or equivalent
• 5 years of experience in Procurement, Planning, Designing, Integration of Subsea/Riser interface design in the oil & gas industry
• Experienced in engineering pre-commissioning and commissioning activities in package
• Possesses good interpersonal skills
• Good problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1. Technical Skills

Operating Systems: Proficiency with common operating systems (Windows, macOS, Linux).

Hardware Knowledge: Ability to troubleshoot and maintain desktops, laptops, printers, and other peripherals.

Networking: Understanding of basic networking concepts such as TCP/IP, DNS, DHCP, and LAN/WAN technologies.

Software Support: Experience supporting common software applications, especially office suites (e.g., Microsoft 365) and enterprise software.

Active Directory: Experience managing user accounts, permissions, and group policies.

Remote Support Tools: Familiarity with tools like TeamViewer, Remote Desktop, or similar.

Ticketing Systems: Experience using ticketing systems (e.g., Jira, ServiceNow) to manage and resolve IT issues.

Cybersecurity Basics: Awareness of security best practices (e.g., antivirus software, firewalls, and data protection protocols).

Job Scope

• Ensure timely collection and delivery of goods.
• Perform delivery duties courteously and professionally.
• Responsible for cleaning and maintenance of the vehicles.
• Conduct daily checks to ensure vehicles are in good and safe condition.
• To perform other general works or other duties when assigned.
• Able to work independently.
• Any other ad-hoc duties that the reporting manager/management may assign.

Requirements

• Mininum Secondary Education and above
• Valid Class 4 licence
• Good driving records

Job purpose

To monitor and maintain the networks, application softwares and hardware systems in the company; providing technical support to local and overseas staff via remote or in person and proposing cost-saving solutions to meet the needs.

Duties and responsibilities

Providing first-level helpdesk and end-user support.

· Installing and configuring computer hardware, software, systems, networks, printers and handheld scanners.

· Monitoring and maintaining computer systems and network infrastructure from end to end – patch panels, UPS, routers, switches, wireless access points, Firewalls, internet connectivity, VPN connectivity etc.

· Administration and management of physical and virtual servers (patching, updating etc.).

· Administration of user accounts (Active Directory, LDAP).

· Troubleshooting system and network problems and diagnosing and solving hardware or software faults.

· Repairing equipment and replacing parts as required.

· Managing backup jobs.

· Providing support, including procedural documentation and relevant reports

· Supporting the roll-out of new applications.

· Maintaining records of software licenses.

· Managing IT Assets, inventory and other IT supplies.

· Source and co-ordinate with vendors for procurement, maintenance and support issues.

· Testing and evaluating new technology.

Requirements

· Proven 3 – 4 years of hands-on experience working in an end-user IT Support role or computer operations environment.

· Experience in installation, setup, configuration, migration, upgrading and maintenance of servers, PCs, OS, software and other related peripherals.

· Required technical troubleshooting skills for Windows 10, 11.

· Knowledge on Windows Server 2012, 2016 and 2021.

· Managing of Action Directory and User email accounts, Symantec Endpoint Protection and Veritas Backup Exec Virtualisation preferably VMware.

· Basic networking protocol (DNS, DHCP, VLAN) with advanced printer / peripheral device troubleshooting.

· Support for handheld smartphones and tablets.

· Monitor and ensures compliance with company’s IT Security policies.

· Patch management.

· Able to work independently and carry out day-to-day IT support with good analytical problem-solving, time management and decision making skills.

· Willingness to take ownership of task and express interests in learning new technologies and systems.

· Cyber-security background will be an added advantage.

Working conditions

· Singapore based.

· 5.5 work days / alternate Saturday

Supporting the Mechanical Maintenance team, you will be responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities

• Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently
• Perform repair or replacement of defective or malfunctioning components of machinery and equipment
• Assist with the monitoring of contractors involved in maintenance on site and maintain asset maintenance plans
• Attend to work orders allocated by Mechanical Engineers
• Perform other duties as assigned

Requirements:

• Diploma in Mechanical Engineering or equivalent
• Preferably 3 years of relevant experience in Power Plants or related industries will be advantageous
• Self-driven, with a good working attitude, and a good team player.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Highlights

• 44 hours, 5 days week
• Free staff meals
• In-house gym facility
• Short walking distance from Tuas Link MRT

Roles & Responsibilities:

Administrative Support Tasks

Scheduling

• Schedule maintenance and repair appointments events and work closely with the head technician & Barista on the schedule
• Coordinate with service providers and customers to ensure timely service.
• Track and manage repair requests and service calls.
• Work closely with the sales team on the equipment installation and coffee tasting schedule.

Customer Service

• Respond to inquiries and complaints related to coffee equipment.
• Respond to the equipment & POSM ordering and delivery for clients or internal
• sales team requests.
• Address any recurring issues to improve customer satisfaction.
• Reporting
• Generate reports on equipment performance, common issues, and service trends. If necessary
• Work closely with the sales department for coffee equipment and servicing contract purposes.

Administrative Tasks

• Handle invoicing and billing for repair services and parts.
• Provide quotations for and follow up on orders.
• Manage contracts with service providers and suppliers.
• Coordinate with other departments (e.g., sales, finance, technicians, procurement, IT) as needed.
• Maintain detailed records of service requests, repairs, and maintenance.
• manage key in-service reports
• Document: Technician over time & claims/service reports and service contract /
• Invoicing, RO, DO, etc

Customer Relationship Management

• Develop and maintain strong relationships with customers and clients.
• Address any recurring issues to improve customer satisfaction.
• Technical Support Tasks
• Troubleshooting
• Handling technical admin phone to assist Sales & Client requests.
• Provide solutions to common problems via phone, email, or person.

Equipment Installation

• Work closely with the sales team on the installation schedule request.
• Oversee and schedule on coffee machines installation with the head of
• technician
• Ensure all the documents and contracts are done before the installation.

Equipment and Asset Management

• Asset Tracking and Inventory Management
• Procurement and Disposal
• Reporting and Documentation
• Parts and Supplies Management
• Order and manage inventory of spare parts and supplies.
• Maintain records of parts used and replaced.
• Liaise with suppliers, procurement, and finance on spare parts and related orders.

Job Requirements:

• High school diploma or equivalent; an associate degree in Business
• Administration, Hospitality Management, or a related field is a plus.
• 1–3 years of experience in administrative support, ideally in the food service or hospitality industry, with F&B equipment knowledge.
• Basic understanding of IT systems and software, proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), and experience with project management software are a plus.
• Strong organizational and time-management abilities, with attention to detail and accuracy.
• Excellent written and verbal communication skills to interact effectively with internal teams and external vendors.
• Ability to troubleshoot minor technical issues and think critically to manage competing priorities.
• Strong interpersonal skills with the ability to work collaboratively in a team environment

Responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities:

· Attend to work orders allocated by Maintenance Engineers

· Analyse process parameters, alarms and information / drawings to diagnose and trouble shoot equipment problems

· Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently

· Perform unit functional test for re-commissioning of overhaul units

· Lead in the repair or replacement defective or malfunctioning components of machinery and equipment

· Assess spare part requirements and raise purchases, record parts and materials used and review tender quotations

· Coordinate logistic arrangement for all maintenance activities

· Maintain a safe and orderly work area by practicing organised housekeeping

· Preparation of weekly activity reports

· Perform other duties as assigned by supervisors

Requirements:

· Diploma in Electrical / Electronics Engineering or equivalent

· Self-driven, with good working attitude and a good team player

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

To train and educate medical professionals and therapists at aesthetic clinics and medical spas on the company's products and treatment protocols.

Key Responsibilities:

Product Knowledge:

• Deepen understanding of the company's product range, including technologies, ingredients, benefits, and potential side effects.
• Stay updated on the latest product information and advancements.

Treatment Protocol Development:

• Collaborate with industry experts to develop and refine treatment protocols.
• Ensure protocols align with industry best practices and regulatory guidelines.

Trainer Certification:

• Obtain necessary certifications to conduct training sessions effectively and legally.
• Maintain certifications through ongoing training and education.

Training Delivery:

• Conduct in-person and virtual training sessions.
• Tailor training content to the specific needs.
• Utilize effective training techniques, such as demonstrations, hands-on practice, and interactive discussions.

Clinical Support:

• Provide clinical support, including troubleshooting treatment issues, answering product questions, and offering guidance on patient management.
• Conduct site visits to assess training needs and provide on-the-job training.

Sales Support:

• Collaborate with the sales team to identify potential customers and provide product demonstrations and training.
• Support and contribute to sales efforts by building strong relationships with clinic staff and addressing their concerns.

Performance Evaluation:

• Track and evaluate the effectiveness of training programs through surveys, assessments, and follow-up visits.
• Identify areas for improvement and implement strategies to enhance future training sessions.

Regulatory Compliance:

• Stay informed about regulatory requirements and ensure that all training materials and practices adhere to industry standards.
• Collaborate with the compliance team to address any regulatory concerns.

Essential Skills and Qualifications:

• Tertiary Education (Diploma and above)
• Fresh graduates are welcomed
• Strong understanding of medical aesthetics, dermatology, and skincare.
• Excellent communication and presentation skills.
• Ability to build rapport and establish trust with medical and beauty professionals.
• Strong organizational and time management skills.
• Attention to details and a commitment to accuracy.
• Ability to work independently and as part of a team.
• Proficiency in relevant software applications, such as PowerPoint and CRM systems.

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

he Resident Technical Officer shall report to the Consultant, be responsible for the constant/standing supervision of the construction of Civil & Structural works of the project and shall exercise all reasonable skill, care and diligence in the discharge of the contract. The Resident Technical Officer is expected to know the Building Control Act (Cap. 29), its relevant by­laws and subsidiary legislation, rules and regulations and its latest revisions, have a working knowledge of the relevant statutory requirements, and comply with all the requirements concerning supervision, quality control and other documentation.

The Resident Technical Officer shall undertake all necessary duties as required to fulfil his role and responsibilities, including those duties stated below:

· Duties at Commencement of Works

· Keeping Records of the Works and Reporting to the Consultant

· Inspection / Supervision & Testing of the Works

· Monitoring the Builder’s Site Management

· Maintaining Documents / Information & Equipment / Provisions

· Duties related to obtaining TOP/CSC

· Duties at Completion of the Works

· The RTO shall execute his duties with diligence and care, acting promptly to deal with any problems arising.

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).
• Prior experience in team leading and management is a must.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Field Engineer - Job Summary

A Field Engineer is responsible for overseeing and managing engineering projects at construction or operational sites. They ensure that the work is executed according to plans, specifications, and safety standards. This role combines technical skills with hands-on fieldwork to address real-time issues during construction, installation, and testing.

Key Responsibilities:

• Project Supervision: Oversee construction or installation processes, ensuring work meets project specifications and quality standards.
• Site Inspections: Conduct regular site inspections to monitor progress, identify issues, and ensure safety protocols are followed.
• Coordination: Work closely with contractors, engineers, and other stakeholders to ensure efficient execution of the project.
• Documentation: Maintain detailed records of work progress, site conditions, and any deviations from the original plans.

Skills & Qualifications:

• A Bachelor's degree or Diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or related fields.
• Fresh graduates are welcome to apply, with on-the-job training and mentorship opportunities.
• Strong problem-solving, communication, and organizational skills.
• Ability to work in field environments
• Able to work under pressure.

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Diploma in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Reporting to Technical & Planning Department Manager, this position will provide technical and process safety support for the manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures and driving plant optimization initiatives.

Responsibilities:

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures, and recommend appropriate solutions or corrective actions.
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions.
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings and following up on action plans and other operational tasks.
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors
• Coordinate Management of Change and support plant investment projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as developing standard operating procedures and maintaining proper certification and documentation.
• Anticipate potential operational issues and recommend appropriate corrective actions.
• Promote continuous development and implementation of improvement ideas to enhance manufacturing competitiveness level

Requirements:

• Master’s Degree in Chemical Engineering or Polymer with 7 to 12 years or Bachelor’s Degree in the same discipline with 9 to 14 years of relevant working experience in Chemical Engineering in a polymer plant
• Strong leadership and communication skills and effective team player
• Self-motivated, independent and resourceful
• Proficient in Microsoft Office applications
• Knowledge in HAZOP, Risk Assessment, DCS, ISO standards would be advantageous
• Proficient in Japanese language as the role is required to liaise with counterparts and understand the Company policy and standards from Japan Headquarters
• Able to perform overtime work when required
• Willing to work in Jurong Island
• Overseas travelling is required

Job Description

• Industry Type: Ship
• Working Location: Boon Lay
• Working Hours: 5.5 days (Alternate Saturday)
• Duration: Permanent Role
• Only Singaporean may apply

Responsibilities

· Responsible for managing the incoming and outgoing orders

· Handle Import/Export permit declarations, custom clearance

· Maintain accurate records of shipping documents as per SOP standards

· Arrange and coordinate import/export shipments

· Coordinate sea/ air freight shipments and transport arrangement

· Liaise with air/sea freight forwarding, shipping lines, transporters to ensure timely delivery of shipment

· Process shipping operation and courier service

· Handling of all billing and invoices

· Ad-hoc duties as and when required

Requirements

· Diploma or equivalent

· With 1 – 3 years of relevant experience

· Proactive and positive working attitude

· Meticulous with good organizational skills

· Proficient in MS Office

· Good interpersonal skills and able to work independently with minimum supervision

Position Overview: The Coordinator of Client Management Support plays a pivotal role in ensuring the smooth and efficient operations of the client management team. This individual will provide essential administrative and organizational support to facilitate effective client communication, relationship management, and overall client satisfaction. The Coordinator will collaborate closely with the client management team, as well as various internal departments, to maintain high-quality service delivery and uphold the company's reputation for excellence.

Key Responsibilities:

1. Client Communication: Act as a primary point of contact for clients' inquiries, requests, and concerns, ensuring prompt and professional responses. Collaborate with client management team members to gather necessary information and provide comprehensive responses.
2. Administrative Support: Assist in preparing and distributing client-related documents, contracts, and reports. Maintain accurate and up-to-date client records, ensuring data integrity and confidentiality.
3. Scheduling and Coordination: Coordinate client meetings, appointments, and follow-ups. Ensure that client management team members are well-prepared for meetings with relevant information and materials.
4. Issue Resolution: Collaborate with the client management team to address and resolve client concerns or issues. Escalate complex problems to appropriate team members while maintaining clear communication with clients.
5. Cross-Functional Collaboration: Collaborate with internal teams such as operations, and finance to ensure cohesive communication and alignment of strategies related to client management.
6. Billing: Monthly billing of all client warehousing activities.

Qualifications:

• Diploma in business administration, or a related field (or equivalent work experience).
• Strong organizational and multitasking skills, with a keen eye for detail.
• Excellent written and verbal communication skills.
• Proficiency in using office software (e.g., Microsoft Office Suite, Google Workspace).
• Ability to work collaboratively in a team-oriented environment.
• Prior experience in client support, customer service, or administrative roles is preferred.
• Familiarity with SAP software and database management is a plus.

Attributes:

• Customer-focused attitude with a commitment to delivering exceptional client service.
• Proactive problem-solving skills and the ability to stay composed under pressure.
• Strong interpersonal skills for building rapport with clients and colleagues.
• Adaptability to evolving client needs and shifting priorities.
• High level of professionalism, integrity, and confidentiality.

The Coordinator of Client Management Support is an integral part of the client management team, contributing to the success of client relationships and the overall growth of the organization. This role offers an opportunity to develop valuable skills in client interaction, project management, and cross-functional collaboration.

Job Responsibilities:

• Be responsible for the company's network, service equipment, the daily operation of desktop and management of the company's IT operation
• Provide on-site service support and handle the installation and maintenance of client's computer desktop, hardware and network equipment
• Be responsible for debugging and troubleshooting the video conference system
• The installation, debugging, configuration and maintenance of the desktop equipment (e.g. desktop, notebook, printer, printer, video conference, telephone, etc.)
• Communication with users to ensure the normal operation of the system
• Normal maintenance of network and computer room management (configured switches and firewalls basically)
• Management of the company's IT assets
• Other IT works assigned by the department manager and work report

Job Requirements:

• College degree and above, major in computer and other related fields
• Familiar with the basic network technology, the working principle of TCP/IP protocol, proficient in the configuration of brand network equipment such as Feita and Cisco, and experienced in the operation and maintenance management of computer room is preferred
• Familiar with mainstream systems such as Windows and Mac operating systems, common conference systems and equipments such as Polycom/Cisco/Teams. Experienced in deploying and debugging systems related to AD domain is preferred
• Good communication skills, initiative in work, strong learning ability, teamwork spirit, ability to work under pressure, strong sense of responsibility and service
• More than three years of relevant IT helpdesk experience. Experienced in system research and development with logical thinking is preferred
• Handle common computer hardware and software failures independently
• Accept the occasional business trip and hardworking
• Proficient in both English and Mandarin

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

The successful candidate will be supporting secretarial duties for the Line of Business General Manager, including Line of Business activities

Be Part of Our Success

• Managing calendar of Line of Business General Manager
• Serves as the contact point between the executives and internal/external stakeholders
• Coordinate with internal and external stakeholders to arrange and confirm meeting details, including agendas, attendees
• Record accurate and concise meeting minutes capturing key discussions, decisions and key action items
• Handle travel requests and claims submission for LOB GM, coordinating flight reservations and accommodations
• Ensure all travel arrangements are made efficiently and in compliance with Company Policies and Procedures
• Prepare and edit correspondence, communications, presentations, and other documents
• Lead and manage a team of Executive admins supporting business units within Line of Business
• Maintain high confidentiality, discretion and professionalism in handling sensitive information, documents and discussion
• Work with the team to organize and co-ordinate Line of Business engagement activities/events
• Provide miscellaneous support as needed, and other adhoc tasks

Qualities We Value

• Diploma in any discipline
• Experience as an executive secretary, supporting senior-level management will be advantageous
• Excellent organizational and time management skills, with the ability to prioritize and multitask effectively
• Ability to work effectively both independently and as part of the team
• Strong ability to communicate with different stakeholders to socialize arrangements
• Proficiency in Microsoft Office Suite and Adobe (Word, Excel, PowerPoint, Outlook)
• Working location is in Ang Mo Kio
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.