Job description;-

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop (i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide on site and remote technical support to clients.

· Conduct training for Junior and Trainee Service Engineers and provide Technical Support

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

• Assist in all AC jobs/projects/contract
• Review all the design/checking of calculations for the company
• Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents
• Act on behalf of the company to maintain reputation and goodwill with the clients
• Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects
• Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects
• Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients
• Promote the employer’s profile and capabilities in the procurement of projects and business development
• Be a management representative of the company for both site and office projects
• Review the design/checking of calculations
• Carry out planning, design drafting, cost estimate etc for the company’s project
• Prepare proposal and performance on tendering works for Consultancy
• Oversee authority’s submission and update of each project
• To cover duties for other Senior/ Design engineers
• Assist in technical design and drafting
• Any other ad-hoc duties as assigned by superior

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all works including all civil and architectural works, plumbing, sanitary, drainage, irrigation and sewer system, commuters facilities, road works, trial trenches and utilities diversion etc.
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems systems and gantry crane and submit evaluation report endorsed by a PE
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works associated to micro-tunneling and mining, Flyover works, sewer diversion (including shaft construction and pipe-jacking operations.

Requirements:

• Diploma or Degree in Civil and Structural Engineering
• At least 4 years’ of experience, of which 3 years experience in either geotechnical works or airport construction.
• Possess a valid RTO cert by IES Singapore

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products
• Will be stationed full time at precast yard.
• Require valid RTO Certification
• Must have SSSS certification

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Job Description & Requirements

• To study and familiarise with the whole development’s organisation, Site conditions, Conditions of Contract, Conditions of Sub-contract, M&E Specification/Drawings, Architectural, Interior, Structural and Specialist drawings, Coordination of M&E, Architectural, Interior, Structural and Specialist elements
• To carry out site supervision and inspection cords of all works done, including records of test inspections, status of workof the works including any off-site manufacturing as instructed by the consultant team so as to ensure that the installation works are constructed in compliance with the design intent, specification, working/approved drawings and quality of works required under the terms of the contract.
• To ensure timely submissions and check all drawings (including authority submission drawings and shop drawings)
• To monitor project progress of the works on site and at any off-site manufacturing facilities and report delays immediately.
• To provide standing supervision as and when directed by the consultant team.
• To maintain proper site records and updated daily res, safety, site diary, materials and equipment onsite, labour, dayworks, provisional quantities, etc.
• To check that the contractor executes preliminaries items.
• To check services routes and contractor’s setting out and report any deviations to the consultant team.
• To verify reports and monitor the progress of work on site, verify the contractors’ progress report and present the report to the DM (Development Manager) in such format that the progress payment claim by the contractor can be easily evaluated.
• To monitor all variations works as instructed or approved by consultant team.
• To attend site progress meetings/technical meetings/consultants’ meetings.
• To attend to contractor’s queries and co-ordinate works of main contractor and direct contractors.
• To inspect completed works and ensure works are carried out in accordance to statutory requirements
• To undertake any other duties related to the project including supervision of M&E works as and when instructed by the consultant team.
• To compile relevant equipment, material, inspection and test certificates submitted by the contractors and pass them to the DM as required for the project records and the clients’ hand-over package.
• To compile Punch List or Defect List with the contractors and ensure that the contractors carry out rectification work diligently to clear all defects during the Maintenance Period.
• To witness all the inspection, testing and commissioning sessions performed by the subcontractors to ensure compliance with designs and specifications.
• Project duration approx. 26 month

Job Requirements

• Possess at least a recognised Diploma/Nitec in Electrical and/or Mechanical Engineering/ Building
• Preferably Registered resident technical officer with IES / ACES
• Minimum 5 years of experience as RTO on local project,.
• A good team player and experience in assisting the consultant team / Resident Engineer in supervision.

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s

expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet

targets

• Preparing cost estimates and ensuring appropriate materials and tools are available

• Providing technical advice and suggestions for improvement on particular projects

• Diagnosing and troubleshooting equipment as required.

• Negotiating with suppliers and vendors to ensure the best contracts.

• Authorizing technical drawings and engineering plans.

• Attend technical meeting with authorities and consultants

• Ensuring environmental, safety, and health practices are carried out at all times

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· 3-5 years of relevant working experience

· Lighting experience is not necessary but would be an asset with experience in lighting control

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

1. Coordinate by managing schedules, filing important documents and communicating relevant information

2. Ensure the adequacy of stocks planning

3. Respond to complaints from customers and give after-sales support when requested

4. Monitor the sales progress, forecasting, prepare sales reports, report account progress, quarterly report.

5. Handle the processing of all orders

6. Inform clients of unforeseen delays or problems

7. Prepare, organizing of Promotion Plan, Execute accordingly

8. Manage all distribution channels clients on products.

9. Taking Orders and other Ad-Hoc Duties

[Order Number: 623341]

Responsibilities:

• Design and implement motion prediction, decision making and motion planning solution for self-driving vehicle
• Driving scenario analysis, Software-In-the-Loop simulation, behaviour/strategy design and motion planning
• Algorithm implementation and software validation
• On-road performance verification
• Code review
• Write professional design and technical documents
• Other ad-hoc duties as assigned

Requirements:

• Good programming skill on C++, with 3+ years software development professional experience
• Good knowledge on robotics decision system, e.g., Finite State Machine, Behaviour Tree, Expert System, POMDP etc.
• Familiar with path planning algorithms, e.g., A*, D*, RRT etc.
• Familiar with common DNN methods, understand typical network training process, and experience on at least one deep learning framework (pytorch/caffe/tensorflow)

To Apply, please kindly email your updated resume to [email protected]

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Gary Ho Cheng Xuan
EA Personnel Reg. No.: R1549767
EA Licence No.: 07C5771

Job Description

• Tracks sales data of companies in the Asean & Oceania region
• Researches competitive products by identifying and evaluating product characteristics, market share, pricing, and advertising; maintaining research databases
• Tracks product line sales and costs by analyzing companies in the Asean & Oceania region
• Monitors budgets by comparing and analyzing actual results with plans and forecasts of companies in the Asean & Oceania region
• Supports management by providing sales data, market trends, forecasts, account analyses, and new product information
• Supports management by organizing regional meetings, and preparing regional reports
• Liaises with global manufacturing plants for the supply of goods
• Centre of contact between Japan Global Business Headquarter and Regional Business Headquarter

Find Out Even More At: https://tinyurl.com/mindflex-fulltime

Office Location: 28 Sin Ming Lane, Midview City (Bright Hill/Marymount/Bishan MRT)

Quick Apply: You may send your Resume/CV to [email protected] or apply via MyCareersFuture.

About Us:

MindFlex Education Pte Ltd is Singapore's #1 Education Agency. Our team is highly focused on bringing the best value to our clients, whilst building an enjoyable and vibrant office culture. Cultivating and caring about our personnel remains at the heart of our company. We promote a fun-filled family-like environment with strictly no office politics and no overtime culture.

We are currently expanding and looking for fresh & energetic talent to join our team. If you are a great team player with a good sense of responsibility and work ethic, do apply to this posting and we would love to get in touch with you!

Job Scope:

- Handle Day-To-Day Business Operations of Singapore's #1 Education Agency

- Attend to interested clients via various forms of warm leads (form orders, calls, WhatsApp...etc)

(no cold-calling or anything of that sort!)

- Assist clients in shortlisting and recommending suitable tutor profiles based on their criterias

- Coordinate and arrange 1st tuition lesson for clients and tutors

- Follow-up with any necessary administrative support and after-sales service

- Familiarize with and utilize custom-made company software which is focused on automation

Job Requirements:

- Friendly, Passionate and Energetic Team Player

- Organized and Good Administrative Skills

- Responsible and Strong Work Ethic

- Decent Typing Speed and Computer Skills

- Polite, Patient and Calm Personality

- Able to Commit for Minimum of 1 Year

- Poly & University Fresh Graduates are welcome, no experience required

Salary:

- Competitive salary structured towards helping employees grow with the company

- $2,800-$4,300/Month + CPF (inclusive of team incentives)

- Base starts from $2,500-$3,500/Month

- Attractive regular team incentives from $300-$800/Month

- Clear Salary Progression, Annual Salary Review (Minimum 5-10% Increase)

- Management positions start from $4,000/Month base salary (for candidates identified with leadership potential)

Working Hours:

- 4 Weekdays, 1 Weekend OR 3 Weekdays 2 Weekend

- 9.00am - 6.30pm

- Strictly No Overtime and No Bring-Work-Home Culture

Why Choose Us:

- Fun Working Environment

- Casual Working Attire, Relaxed Setting

- Spacious Office with Modern & Fun Entertainment Facilities (Pool Table, Playstation 5, Karaoke Set, Board Games...etc)

- Company Meals / Outings / Events / Bonding Activities

- Full Leave Benefits: PH, Annual Leave, Sick Leave

- Strictly No Office Politics / Drama

- Great and Enjoyable Company Culture

- Career Progression and Extremely Low Staff Turnover Rate

- New Bright Hill MRT (Brown-Line) at Doorstep of Office

Others:

- Shortlisted candidates will be contacted for a short interview over Zoom or Face-to-Face

- Signing of Non-Compete contract will be required upon successful employment

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbent's charge.

Responsibilities

• Support automation maintenance team in performing regular preventive/corrective/ predictive /conditions based / ad hoc / reliability centred based maintenance on storage systems, equipment, and packaging machines that would ensure optimal operation with minimal disruption to supply chain's operation.
• Support Automation Maintenance Lead on complex diagnostics and repair malfunctioning complex logistics and packaging equipment.
• Support installation, modification, upgrade, and maintenance of storage systems and packaging equipment in project phase as team representative.
• Support automation team in maintaining industrial control systems for automated equipment ( Software / hardware)
• Deep Dive and Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.
• Provide engineering support for the modifications of robotic and automation systems.
• Work closely with operations and automation teams to ensure that all automation equipment and processes meet safety standards and comply with company policies.
• Support in prepare reports about system performance and breakdowns from technicians, for management.
• To be able to support Automation Maintenance Lead and technicians in identifying and resolving process related issues.
• Work with Team to formulate work instructions / safety risk assessment / Continuous improvement projects.
• Ability to calculate and identify bottlenecks in process flow to prevent bottlenecks and formulate backup plans with the operations team as a preventive measure.
• Any other ad hoc duties as assigned.

• Bachelor Degree is preferable
• Major in Mechanical or Mechatronics or Automation Control
• 3 years'+ working experience in Integrator/ automation equipment manufacture/ warehouse automation project. Or 5 years+ after service experience in automation project
• Familiar with AutoCAD
• Familiar with devices in automation
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting.

• Work location: 7 Sunview Rd, Singapore 627618
• Working hours: 4 days work 3 days off rotating shift work (8am - 8pm, 8pm - 8am)

Responsibilities :

• Provide technical support to customer for the use of Industrial UPS and DC Systems and Battery.

• Coordinate with end-users for on-site installation, commission, repair and maintenance.

• Work closely with customers and engineers to ensure on-site work are carried out in safe manner, adhering to safety measures.

• Provide training to customers for start up and operational of UPS and DC Systems.

• Follow up on maintenance contract and ensure work is carried out timely and on schedule.

Requirements :

• Diploma or Degree in Electrical / Electronics Engineering.

• 5 years of relevant experience in UPS /DC power industry.

• Self motivated and team player with strong sense of responsibility.

• Good interpersonal, communication and presentation skills.

• Able to travel overseas within Asia within short notice.

Other info:

· Company specialized in electrical power

· Salary $4000 to $5000

· 5-day work

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Find Out Even More At: https://tinyurl.com/mindflex-fulltime

Office Location: 28 Sin Ming Lane, Midview City (Bright Hill/Marymount/Bishan MRT)

Quick Apply: You may send your Resume/CV to [email protected] or apply via MyCareersFuture.

About Us:

MindFlex Education Pte Ltd is Singapore's #1 Education Agency. Our team is highly focused on bringing the best value to our clients, whilst building an enjoyable and vibrant office culture. Cultivating and caring about our personnel remains at the heart of our company. We promote a fun-filled family-like environment with strictly no office politics and no overtime culture.

We are currently expanding and looking for fresh & energetic talent to join our team. If you are a great team player with a good sense of responsibility and work ethic, do apply to this posting and we would love to get in touch with you!

Job Scope:

- Handle Day-To-Day Business Operations of Singapore's #1 Education Agency

- Attend to interested clients via various forms of warm leads (form orders, calls, WhatsApp...etc)

(no cold-calling or anything of that sort!)

- Assist clients in shortlisting and recommending suitable tutor profiles based on their criterias

- Coordinate and arrange 1st tuition lesson for clients and tutors

- Follow-up with any necessary administrative support and after-sales service

- Familiarize with and utilize custom-made company software which is focused on automation

Job Requirements:

- Friendly, Passionate and Energetic Team Player

- Organized and Good Administrative Skills

- Responsible and Strong Work Ethic

- Decent Typing Speed and Computer Skills

- Polite, Patient and Calm Personality

- Able to Commit for Minimum of 1 Year

- Poly & University Fresh Graduates are welcome, no experience required

Salary:

- Competitive salary structured towards helping employees grow with the company

- $2,800-$4,300/Month + CPF (inclusive of team incentives)

- Base starts from $2,500-$3,500/Month

- Attractive regular team incentives from $300-$800/Month

- Clear Salary Progression, Annual Salary Review (Minimum 5-10% Increase)

- Management positions start from $4,000/Month base salary (for candidates identified with leadership potential)

Working Hours:

- 4 Weekdays, 1 Weekend OR 3 Weekdays 2 Weekend

- 9.00am - 6.30pm

- Strictly No Overtime and No Bring-Work-Home Culture

Why Choose Us:

- Fun Working Environment

- Casual Working Attire, Relaxed Setting

- Spacious Office with Modern & Fun Entertainment Facilities (Pool Table, Playstation 5, Karaoke Set, Board Games...etc)

- Company Meals / Outings / Events / Bonding Activities

- Full Leave Benefits: PH, Annual Leave, Sick Leave

- Strictly No Office Politics / Drama

- Great and Enjoyable Company Culture

- Career Progression and Extremely Low Staff Turnover Rate

- New Bright Hill MRT (Brown-Line) at Doorstep of Office

Others:

- Shortlisted candidates will be contacted for a short interview over Zoom or Face-to-Face

- Signing of Non-Compete contract will be required upon successful employment