Job Scope:

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

Requirements:

• Fresh Graduates are welcome
• Min Diploma in Construction related major.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Responsibilities:

• Reports to the Utility Manager and coordinates with subcontractors and the construction team on excavation, services diversion, and reinstatement works.
• Provides progress updates for on-site activities, supervises subcontractors' work to ensure it meets the plan, timeline, and quality standards.
• Ensures compliance with statutory requirements, procedures, and safety regulations for utilities and M&E work.
• Assists engineers with work programming, scheduling, and progress monitoring.
• Performs other tasks as assigned by the supervisor.

Requirement:

• Degree in Civil Engineering or equivalent
• Minimum 3 years experience
• Prefer candidate with sound knowledge of Auto CAD.

Responsibilities:

• Perform software development activities including requirements gathering and analysis, planning, systems design, development and implementation, documentation, testing and deployment.
• Participate and follow in all areas of the software development lifecycle from requirements definition to deployment.
• Document and demonstrate solutions by developing documentation, flowcharts, wireframes, diagrams, charts, UI/UX, code comments and code reviews.
• Recommend and evaluate detailed design of system components/libraries to ensure reusability and flexibility is practiced, where applicable.
• Develop and Implement the software in accordance to the coding standards and design patterns specified in the design document
• Debug, troubleshoot and resolve bugs and complex issues.
• Research and evaluate new software technology stacks for project and product development.
• Report to and work closely with Team Lead / Project Manager for projects deliverables
• Provide operational support, ongoing maintenance and enhancement.

Requirements

• Bachelor’s degree or above with solid programming skills in C# is highly desired.
• Good working knowledge on Microsoft technologies like .Net, .Net Core, Service-Oriented architecture, Entity Framework, nHibernate, ASP.NET, WPF, WCF and MS SQL.
• Familiarity with software design patterns, such as MVC and MVVM.
• Working knowledge on cloud DevOps
• Experience with Python or React would be advantageous.
• A good innovative team player with strong sense of integrity & accountability.
• Great communication skills.
• Must have willingness to learn new technologies.
• Excellent problem solving and analytical thinking skills.
• Fresh graduates are welcome to apply

What we offer:

• An attractive remuneration package will commensurate your experience and qualification.
• Work with a team who are generous in knowledge sharing, friendly, smart, passionate, and funny too.
• Business casual dress throughout the week.
• Professional training opportunities. We believe learning is a lifelong journey. We offer everyone the internal and external training opportunity to grow employee’s technical skills.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Salary: $4,500 - $7,000

We are looking for a skilled Network Engineer to join our engineering team. You’ll be responsible for designing, implementing, and managing network systems and data center infrastructure.

What You’ll Do:

• Design and implement network systems, ensuring they meet client requirements.
• Install and terminate network equipment (copper, fiber, switches, routers, firewalls, etc.).
• Test, configure, and manage servers (VMware), SAN storage, and network infrastructure.
• Conduct factory acceptance tests (FAT) and provide reports.
• Deliver training and presentations to customers.

What You’ll Need:

• Bachelor's degree in Computer Science, Networking, or a related field.
• 5+ years of relevant experience.
• Strong documentation, organizational, and troubleshooting skills.
• Certifications:Cisco (CCNP preferred).
• NetApp/EMC (NCDA preferred).
• VMware (VCIX6-DCV preferred).

For interested applicants, kindly click “apply”

EA Personnel Name: Melody Sim
EA Personnel No: R2095899
EA License No: 16C8443

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Responsibilities:

• Perform software development activities including requirements gathering and analysis, planning, systems design, development and implementation, documentation, testing and deployment.
• Participate and follow in all areas of the software development lifecycle from requirements definition to deployment.
• Document and demonstrate solutions by developing documentation, flowcharts, wireframes, diagrams, charts, UI/UX, code comments and code reviews.
• Recommend and evaluate detailed design of system components/libraries to ensure reusability and flexibility is practiced, where applicable.
• Develop and Implement the software in accordance to the coding standards and design patterns specified in the design document
• Debug, troubleshoot and resolve bugs and complex issues.
• Research and evaluate new software technology stacks for project and product development.
• Report to and work closely with Team Lead / Project Manager for projects deliverables
• Provide operational support, ongoing maintenance and enhancement.

Requirements

• Bachelor’s degree or above with solid programming skills in C# is highly desired.
• Good working knowledge on Microsoft technologies like .Net, .Net Core, Service-Oriented architecture, Entity Framework, nHibernate, ASP.NET, WPF, WCF and MS SQL.
• Familiarity with software design patterns, such as MVC and MVVM.
• Working knowledge on cloud DevOps
• Experience with Python or React would be advantageous.
• A good innovative team player with strong sense of integrity & accountability.
• Great communication skills.
• Must have willingness to learn new technologies.
• Excellent problem solving and analytical thinking skills.
• Fresh graduates are welcome to apply

What we offer:

• An attractive remuneration package will commensurate your experience and qualification.
• Work with a team who are generous in knowledge sharing, friendly, smart, passionate, and funny too.
• Business casual dress throughout the week.
• Professional training opportunities. We believe learning is a lifelong journey. We offer everyone the internal and external training opportunity to grow employee’s technical skills.

Salary Range: $3,800 - $5,500

The System Engineer designs, configures, and documents telecommunication systems such as IP Infrastructure, WLAN, CCTV, Radar, and other technologies. Reporting to the Engineering Manager, this role involves technical design, drawing preparation, and ensuring client requirements are met.

Responsibilities

• Design and document telecommunication systems based on client needs.
• Prepare engineering drawings and oversee their quality and compliance with standards.
• Support system configuration, testing, and factory acceptance processes.
• Train clients and commissioning engineers, and assist with equipment assembly and integration.

Requirements

• Diploma in Telecommunications or a related field with 4–5 years of relevant experience.
• Strong documentation, time management, and communication skills.
• Proficiency in AutoCAD and experience with site commissioning or coverage tools is a plus.

EA Personnel Name: Melody Sim

EA Personnel No: R2095899

EA License No: 16C8443

Details:

• General secretarial and clerical functions relating in particular to Conveyancing works.
• Maintenance of files and records.
• Render any clerical and secretarial assistance as and when or where the company requires.

Requirements:

• No experience is welcome to apply.
• Good communication skills, enthusiasm, and a positive and energetic attitude.
• Proficient in Microsoft Office Applications.
• Willing to work in a fast-paced environment.
• Good Organization skills and the ability to work independently.

We offer attractive salaries, good teams and a good environment to work in.

Kindly write in your full resume and expected remuneration to HR at [email protected]

Only candidates who have been shortlisted for interviews will be contacted via email.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Summary:

• Basic salary up to $4500
• Commission + Variable bonus
• Transport allowances or reimbursement
• 5 days work week @ 8.30 - 5.30pm
• Location: Tai Seng (walkable from MRT station)
• Opportunity to travel overseas
• Sales or engineering experience / background

Key Responsibilities:

• Identify and approach potential clients via cold calling, proposal emails, networking and etc
• Establish and maintain relationships with clients to foster long-term business
• Prepare quotes and proposal tailored to client's needs
• Use knowledge of products and services to recommend solutions
• Coordinate with internal departments to resolve operational issues
• Address customer concerns related to products
• Other ad hoc duties

Key Requirements:

• Min Nitec in Electrical / Electronic engineering or equivalent
• 2 year of sales / engineering experience
• Willing to travel overseas

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Responsibilities:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply ，as training will be provided.

•Knowledgeable in basic Autocad software

•Has positive attitude and sense of responsibilities

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Responsibilities:

• Perform and manage software development activities including requirements gathering and analysis, planning, systems design, development and implementation, documentation, testing and deployment.
• Participate and manage in all areas of the software development lifecycle from requirements definition to deployment.
• Document and demonstrate solutions by developing documentation, flowcharts, wireframes, diagrams, charts, UI/UX, code comments and code reviews.
• Recommend and evaluate detailed design of system components/libraries to ensure reusability and flexibility is practiced, where applicable.
• Develop and Implement the software in accordance to the coding standards and design patterns specified in the design document
• Debug, troubleshoot and resolve bugs and complex issues.
• Research and evaluate new software technology stacks for project and product development.
• Report to and coordinate closely with Team Lead / Project Manager for projects deliverables.
• Provide operational support, ongoing maintenance and enhancement.
• Provide guidance to junior engineers.

Requirements

• Bachelor’s degree with solid programming skills in C# is highly desired.
• Strong working knowledge on Microsoft technologies like .Net, service-oriented architecture, Entity Framework, nHibernate, ASP.NET, WPF, WCF and MS SQL.
• Strong OOP design experience.
• Working experience in healthcare domain, HL7, DICOM is a plus.
• Working knowledge on cloud DevOps
• Familiarity with software design patterns, such as MVC and MVVM.
• Able to work independently with minimum supervision.
• Experience with Python or React would be advantageous.
• A good innovative team player with strong sense of integrity & accountability.
• Great communication skills.
• Must have willingness to learn new technologies.
• Excellent problem solving and analytical thinking skills.

What we offer:

• An attractive remuneration package will commensurate your experience and qualification.
• Work with a team who are generous in knowledge sharing, friendly, smart, passionate, and funny too.
• Business casual dress throughout the week.
• Professional training opportunities. We believe learning is a lifelong journey. We offer everyone the internal and external training opportunity to grow employee’s technical skills.

Responsibilities:

• Perform and manage software development activities including requirements gathering and analysis, planning, systems design, development and implementation, documentation, testing and deployment.
• Participate and manage in all areas of the software development lifecycle from requirements definition to deployment.
• Document and demonstrate solutions by developing documentation, flowcharts, wireframes, diagrams, charts, UI/UX, code comments and code reviews.
• Recommend and evaluate detailed design of system components/libraries to ensure reusability and flexibility is practiced, where applicable.
• Develop and Implement the software in accordance to the coding standards and design patterns specified in the design document
• Debug, troubleshoot and resolve bugs and complex issues.
• Research and evaluate new software technology stacks for project and product development.
• Report to and coordinate closely with Team Lead / Project Manager for projects deliverables.
• Provide operational support, ongoing maintenance and enhancement.
• Provide guidance to junior engineers.

Requirements

• Bachelor’s degree with solid programming skills in C# is highly desired.
• Strong working knowledge on Microsoft technologies like .Net, service-oriented architecture, Entity Framework, nHibernate, ASP.NET, WPF, WCF and MS SQL.
• Strong OOP design experience.
• Working experience in healthcare domain, HL7, DICOM is a plus.
• Working knowledge on cloud DevOps
• Familiarity with software design patterns, such as MVC and MVVM.
• Able to work independently with minimum supervision.
• Experience with Python or React would be advantageous.
• A good innovative team player with strong sense of integrity & accountability.
• Great communication skills.
• Must have willingness to learn new technologies.
• Excellent problem solving and analytical thinking skills.

What we offer:

• An attractive remuneration package will commensurate your experience and qualification.
• Work with a team who are generous in knowledge sharing, friendly, smart, passionate, and funny too.
• Business casual dress throughout the week.
• Professional training opportunities. We believe learning is a lifelong journey. We offer everyone the internal and external training opportunity to grow employee’s technical skills.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.