Key Responsibilities

• Perform tool build, integration, testing and troubleshooting
• Ensure tool remains up for Process and other hardware qualifications.
• Work with Clean Room Facilities group to specify facilities requirements.
• Understand facilities availability and needs of the tool and work with the facilities group to manage & troubleshoot any facilities related issues.
• High level technical knowledge in at least one R&D discipline (Optic, Electronic, Motion, SEM): (1) Support R&D module owner in “Off & On Tool” Module Integration, Calibration and Qualification (2) Qualify Module performance to spec (on & off tool) (3) Support R&D Development (C&F) activities
• Qualification of non-system components (isolated from application)
• Define & execute Qualification plans; Define, execute and qualify calibration procedures (off and on tool).
• Performs all standard service activities through Tier I. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to customer tool issues by communicating with other engineers and participating in escalation conference calls.
• May participate in projects to reduce costs and increase uptime.
• Verifies operational quality of system equipment. Assists senior engineers as needed.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers.
• Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Assumes responsibility for complete customer satisfaction within work area.
• Assists in planning, communicating, and coordinating support plans with customer management.
• Manage external customers and support tool issues at customer site
• Complies with all safety procedures and consistently demonstrates safety as a value.

Requirements

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools (CVD, PVD, Etch)
• Relevant education qualification in Engineering
• Ability to work with deadlines and with all levels of internal and external stakeholders including customers
• Ability to work in cleanroom work environment

Work Location

• Science Park II

Work location: Loyang Way

Working Week: 5.5 days

Working Hours: 9 am to 6 pm, Monday to Friday

Saturday: 9 am to 1 pm Saturday

Monthly Salary: S$15,000 to S$16,500

Key Responsibilities:

1. Drive strategic and technical innovation decisions, ensuring the company stays at the forefront of the metal packaging industry.
2. Drive innovation/invention and design to enable manufacturing lines to run more efficiently with reduced downtime, less material waste, and greater output per unit of time.
3. Drive operational excellence through innovation and provide practical solutions that enhance productivity and minimize operational costs for the company.
4. Lead the product development team to define and influence the direction of future industry innovations.
5. Comply with safety and metal packaging regulations and requirements.

Job Requirements:

1. Bachelor’s degree in engineering - mechanical manufacturing technology and equipment (highly preferred).
2. Strong leadership skills to shape the direction of product development and operational excellence are key to contributing to the company’s growth and success in a competitive market.
3. Minimum of 18-20 years of hands-on experience in the metal packaging machine design sector.
4. Proven track record of working on various complex projects, ranging from machine design to integrating cutting-edge technologies that improve operational efficiency and product quality.
5. Proven 2-3 patent designs being published and recognized by the industry – for example, it has become the industry benchmark, setting new standards for quality and performance.
6. Strong interpersonal and communication skills in written and verbal English and Chinese, as you must communicate frequently with internal stakeholders in China and external stakeholders across China and Asia.

Job Responsibilities:

• To manufacture production units to meet performance objectives with minimum supervision
• To perform simple maintenance and calibration of test means or equipment whenever necessary with the support of Test Engineering dept.
• Manage the WIP level
• Accurate reporting of any anomalies encountered during production process. Detect and alert in case of default or results deviations (even if still within the good range)
• To involve in 5S and Kaizen initiatives
• To support administrative works (Raise PR, Document Archiving Process) and production task as per assigned by team lead/supervisor

Job Requirements:

• NITEC/Diploma in Electronics Engineering
• Ability to understand and follow manufacturing/technical instructions
• Ability to operate complex test tools
• Ability to read or interpret test results

Other Information:

• Working Hours: 5 Days, Shift work may be expected
• Working Location: Changi

We are a signage manufacturing company at Loyang Drive. We are seeking to employ a sales support Admin.

Job Requirements

• Proficient in MS office & able to converse in bilingual.
• Able to converse on phone and thru email.
• Neat & consistent in filing and record.
• Able to work in fast pace environment.

Job Responsibilities

• To prepare delivery order and memo forms for daily works.
• To follow up with client for date of delivery and or installations.
• To assist to brief and arrange teams for delivery and or installations.
• To arrange for drivers to assist in collection/pick up or delivery.
• Ad hoc admin jobs assign.

Interested applicants, please WhatsApp to 90097956 or email to [email protected]

(A) Specific:

• Responsible for on-site / off-site / remote troubleshooting, installation and commissioning of IT related solutions.
• Provide service support and maintenance to HQ & Site Office.
• Troubleshoot Desktop / Server / Network / Security / Printer.
• Perform routine maintenance tasks which includes update patches, asset tracking, and status update.
• Liaise with distributors / vendors on application and technical information.
• Prepare and update multimedia slideshow or festival E-Card.

(B) Safety:

• To follow the safety procedures, rules and regulation and eliminate or reduce hazard at the workplace.

(A) Education, Qualifications & Special Training:

• NITEC or Diploma in Information Technology / Computer Science.
• Job holder without the above qualification but with relevant experience would be considered
• Fresh graduates are welcome. Training will be provided.

(B) Knowledge & Skills:

• Required skills - Microsoft Outlook, Excel, Word and Power Point.
• In-depth knowledge of hardware and software.
• Up-to-date knowledge of the latest IT and software trends.
• Good working attitude, self-motivated and able to work independently.
• Ability to quickly establish good working relationships.
• Good communication skills (verbal and written).

(C) Experience:

• At least 1 year IT helpdesk support experience in technical support on network and application as well as troubleshooting desktop, server, network, security and printer.

Statement Of Purpose (Overall Purpose of Job)

Handle and provide IT duties within the Company.
*

Major Duties & Responsibilities*
(A) Specific :

• Responsible for on-site / off-site / remote troubleshooting, installation and commissioning of IT related solutions.
• To provide service support and maintenance to HQ & Site Office.
• Maintain and troubleshooting Desktop / Notebook / Server / Network / Printer.
• Perform routine maintenance tasks, which includes update patches, fixed asset tracking and status update.
• Maintain hardware and software inventory records for audit and asset management purposes.
• Protect the organizations value by keeping information confidential.
• Plan, develop and manage procedure for the smooth operations.
• Liaise with distributor/vendors on application and technical support.
• Prepare and update multimedia slideshow or festival E-Card.

(B) General :

• Handle and provide IT support within the Company.
• Manage and support daily operations and ad hoc requests and requirements.
• Others duties as assigned.

(C) Safety:

• Follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• NITEC, Diploma in Information Technology / Computer Science.
• Job holder without the above qualification but with relevant experience would be considered.

(B) Knowledge & Skills :

• Good working attitude, self-motivated and able to work independently.
• Required skill(s) : Microsoft Outlook, Excel, Word, Power Point.
• In-depth knowledge of hardware and software.
• Ability to quickly establish good working relationships.
• Good communication skills (Verbal and written).

(C) Experience :

• Possess at least 1 year IT helpdesk support experience.
• Experience in providing technical support on network and application issues.
• Maintain and troubleshooting Desktop / Server / Network / Printer.

Statement Of Purpose (Overall Purpose of Job)

Handle and provide IT duties within the Company.
*

Major Duties & Responsibilities*
(A) Specific :

• Responsible for on-site / off-site / remote troubleshooting, installation and commissioning of IT related solutions.
• To provide service support and maintenance to HQ & Site Office.
• Maintain and troubleshooting Desktop / Notebook / Server / Network / Printer.
• Perform routine maintenance tasks, which includes update patches, fixed asset tracking and status update.
• Maintain hardware and software inventory records for audit and asset management purposes.
• Protect the organizations value by keeping information confidential.
• Plan, develop and manage procedure for the smooth operations.
• Liaise with distributor/vendors on application and technical support.
• Prepare and update multimedia slideshow or festival E-Card.

(B) General :

• Handle and provide IT support within the Company.
• Manage and support daily operations and ad hoc requests and requirements.
• Others duties as assigned.

(C) Safety:

• Follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• NITEC, Diploma in Information Technology / Computer Science.
• Job holder without the above qualification but with relevant experience would be considered.

(B) Knowledge & Skills :

• Good working attitude, self-motivated and able to work independently.
• Required skill(s) : Microsoft Outlook, Excel, Word, Power Point.
• In-depth knowledge of hardware and software.
• Ability to quickly establish good working relationships.
• Good communication skills (Verbal and written).

(C) Experience :

• Possess at least 1 year IT helpdesk support experience.
• Experience in providing technical support on network and application issues.
• Maintain and troubleshooting Desktop / Server / Network / Printer.

Job Description:

• Establish sales channels;
• Expand the customer base and maximize the market coverage;
• Promote and sell company’s range of fire protection products;
• Attend to sales enquiries and prepare sales quotation;
• Providing pre-sales technical assistance and product education;
• Assist in formulating business strategies and identify new business opportunities;
• Preparing and negotiating tender and contract terms and conditions to meet both client and company needs;
• Providing after-sales support services;
• Build & maintain good relationship with clients;
• Supporting marketing activities by attending trade shows, conferences and other marketing events;
• Making technical presentation and demonstrating how a product meets client’s needs.

Requirements:

• Diploma or Degree in Business Management or any related field
• Hardworking, proactive, self-motivated with good working attitude
• Aggressive and strong customer-oriented service mentality
• Possess strong communication and interpersonal skills
• At least have 3 years of working experience

Job Description:

• Serve as the first point of contact for IT support within the company, addressing technical issues and queries.
• Install, configure, and maintain hardware, software, and network systems.
• Monitor IT infrastructure, ensuring seamless operations of computer systems and networks.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Support IT requirements for manufacturing systems, ensuring minimal downtime.
• Document IT processes, incidents, and resolutions for future reference.
• Assist with maintaining cybersecurity protocols and data backups.
• Provide basic training and guidance to employees on IT systems and tools.

Requirements:

• Diploma or Degree in Information Technology, Computer Science, or any related field.
• Basic knowledge of hardware, software, and networking fundamentals.
• Familiarity with troubleshooting tools and IT service management practices.
• Knowledge of basic IT support tools.
• Strong problem-solving skills and attention to detail.
• Excellent communication and interpersonal skills.

Job Description:

• Provide first-level technical support for hardware, software, and network issues.
• Assist in the setup, configuration, and maintenance of IT equipment such as computers, printers, and other peripherals.
• Monitor and maintain local area networks (LAN), internet connections, and other IT infrastructure.
• Troubleshoot technical issues reported by employees and escalate more complex issues to senior IT staff when necessary.
• Support the implementation and deployment of IT solutions of the company.
• Maintain accurate records of IT support requests and resolutions.
• Assist in ensuring data security and proper system backups.
• Provide basic training to employees on IT systems and best practices.

Requirements:

• Diploma or Degree in Information Technology, Computer Science, or a related field.
• Basic understanding of computer hardware, operating systems, and network troubleshooting.
• Familiarity with Microsoft Office software and other common business software.
• Knowledge of basic IT support tools.
• Strong problem-solving skills and attention to detail.
• Excellent communication and interpersonal skills.

Responsibility

· Provide IT support and perform initial troubleshooting or escalate to our outsourced IT specialists for complicated cases, or provide alternatives to resolves the cases.

· Support HQ and project sites regarding IT-related issues.

· Monitor and maintain in-house networks and servers.

· Manage and maintain computer hardware and software systems, Inventory, and deployment to users.

· Upgrade, install and configure new hardware and software to meet company objectives.

· Create user accounts and set up email accounts for new staff.

· Perform diagnostic tests and debugging procedures to optimize computer systems.

· Document processes, as well as backing up and archiving data.

· Develop data retrieval and recovery procedures.

· Perform any ad-hoc assignment as instructed by superiors.

Requirements

· ITE, Diploma or Higher qualification in computer science, information technology, information systems, or related fields.

· Preferable with at least 1-2 years of relevant working experience in a similar role.

· Responsible, meticulous, fast learner.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

- Attend to and perform daily support, maintenance and troubleshooting onsite and offsite

• Provide on site support for various systems, network and desktop troubleshooting, to ensure that the service meets the SLA

• To work with product team on any system enhancement or troubleshooting.

Requirements:

• Diploma in IT or relevant discipline.

• Prefer experience in desktop support and good working knowledge in Windows OS, Basic Networking.

• Experience in customer support environment will be advantageous.

• Good technical, analytical and troubleshooting skills, with strong customer-oriented attitude and inter-personal skills,

• Willing to travel to multiple sites

• Willing to work alternate shift hours: 2 days work and 2 days off rotational shift (AM Shift: 8AM to 8PM; PM Shift 8PM to 8AM)

• Perform product assembly, equipment and machine sub-module assembly according to specifications
• Generate require documentation from Bill of Materials (BOM) and assembly drawings
• Running simulations or conducting basic analyses to support design decisions.
• Assisting engineers in creating and updating technical drawings, schematics, and other design documents.
• Support and involvement in PD, NPI and MP phases
• Generate PFMEA, technical reports and perform Failure Analysis (FA) on products
• Hand on electrical hard wiring & components installation
• Conducting research on new technologies, materials, or manufacturing processes that could benefit the project.
• Maintaining organized records of design documents, test results, and other relevant paperwork.
• Liaising with other departments such as manufacturing, quality assurance, and supply chain to ensure smooth collaboration.
• Perform 5S and ad hoc duties as requested

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

The Role: BOM Engineer

Responsibilities

• Responsible for RFQ costing preparation:
• Evaluate BOM and Drawing Package from customer.
• Prepare BOM and manage RFQ with costing team
• Compile cost
• Responsible for BOM completeness, costing and uploading to SAP.

Requirements

• Min Diploma in Mechanical / Mechatronics Engineering or its equivalent.
• 3 to 5 years of relevant experience in assembly / automation manufacturing environment.
• Possess MS Office skills and proficient with SAP
• Understanding of complex Bill of Materials (thousand liners)
• Understanding of mechanical drawings.
• Strong leadership with good communication skills
  
  Candidates who did not meet the above requirements may be considered for the Assistant Engineer role.

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

We regret that only shortlisted candidates will be notified.

Thank you for applying!

Able to commit from Jan - April 2025.

Responsibilities:

• Expands personal product knowledge on electronics components.
• Supporting buyers in pricing updates in the systems.
• Manage supplier's delivery schedules, ensuring on-time delivery to customers.
• Review sales orders and generate purchase orders to supplier.

Key Responsibilities

Continual improvement - Works on continual improvement projects for digital tool space
Communication - Internally Communicates complex information to others.
Troubleshooting - Provides guidance with troubleshooting gaining knowledge on issues and actions. Deployment, configuration, and propagation of DTs
Daily work - Maintains the FSS system, monitors alarms, propagates models, and adjusts model limits. Main point of contract for issue escalation at the site
Mentoring - Works with others on DT usage while gaining insite on tools, signals, and systems.

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline. Have some knowledge of Applied's products and applications.

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary

A Senior Geotechnical Engineer position is available with Fugro Marine Geotechnical Team. The Marine Geotechnical service line is responsible for acquiring and interpreting accurate geotechnical data which enables our clients to make informed decisions during the engineering, design and construction phases of infrastructure development projects, ultimately reducing project risk and costs.

Reporting to a Principal Geotechnical Engineer / Engineering Manager, the Senior Geotechnical Engineer will take responsibility for independently delivering the findings of offshore site characterisation projects whilst managing a small engineering team in the future. From time to time you will also lead site based teams which is predominantly on dedicated geotechnical drilling vessels.

This position will be based in the Singapore office and serving all projects in the Asia Pacific Region.

About the Role

• Assisting the Engineering and Reporting Manager and Principal Engineers in the technical direction, resource management, planning, mentoring and training of a team of geotechnical engineers
• Communicate directly with Clients and Fugro’s project management team to ensure requirements are met
• Technically manage a portfolio of various sized projects, ensuring compliance with the specification, and delivery of projects to programme dates and within budget
• Perform offshore stints either as a Lead Geotechnical Engineer or for the purposes of training and mentoring junior staff
• Delegate and distribute project responsibilities to junior staff and oversee their work
• Provide geotechnical consultancy services
• Review and approval of data provided by laboratory and geotechnical engineers

About you

• A degree in Civil Engineering, Engineering Geology, Geotechnical Engineering
• Demonstrable experience within the Geotechnical Engineering profession, with relevant experience within the onshore or marine sector
• Willingness and ability to be part of offshore data acquisition campaigns
• Computer literate, capable of using spreadsheets preferably including macros and SharePoint
• Capable of generating a safe, productive and quality-based culture within the team
• Strong communication skills, both written and verbal
• A good team player and able to form working relationships with clients and colleagues at all levels

What we offer

Competitive salary with Annual Wage Supplement

Generous paid-leave

Career & training opportunities (international opportunities possible)

Company shuttle from various pick-up at MRT stations across Singapore

Collective health insurance and outpatient benefits;

Employee Assistance Programme (EAP) to provide help when you need extra support.

Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘Creating a safe and liveable world together’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

As the Senior System Software Engineer, you will be the technical lead for our scientific instrument system software development. You will be working closely with hardware/mechatronics engineers to define and develop low level communication protocol, motion control and device drivers and firmware to support our scientific instrument system design, development, test, and manufacturing. You also work closely with hardware/firmware/software engineers to define and develop the automated system to support our cutting-edge virus identification equipment. This opportunity will allow you to grow and command the system software design and development of one of the most innovative and leading scientific instruments in the industry.

Roles and Responsibilities

• Design and develop system software architecture for Borries instrument system.
• Work very closely with the system hardware engineering team on dissecting system requirements, conducting system analysis, design, and review, to ensure our system design can best meet the requirements in term of functionality, performance and reliability.
• Responsible for defining and documenting the system software requirement, architecture, design, unit test, integration test, and development plan to ensure our system software design and development plan can best meet the requirements.
• Responsible for implementing and testing the system software, tracking its issues until its resolution, to ensure our product can best meet customers’ requirements and delivery timeline.

Qualifications

Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.

Job Requirements / Special Skill sets

• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware.
• Solid programming skills in C/C++/C#
• Familiar with Python, Linux and Qt would be an advantage.
• Background in image processing/computer vision/machine learning including programming new image processing algorithm and machine learning tools would be an advantage.
• Solid knowledge and extensive working experience in GUI software design would be an advantage.
• Strong analytical and presentation skills, as well as high creativity, flexibility, and ability to think 'out of the box'.
• Strong oral and written communication skills.
• Ability to work with other functional teams, especially in a multi-site environment.
• At least 3 years of experience with system/architecture development on an equipment system.

Job Description & Requirements:

• Develop detailed manufacturing processes, including assembly procedures, testing protocols, and quality control checks.
• Create efficient process flows to minimize waste and maximize productivity.
• Continuously analyse and improve existing processes to reduce costs, increase yield, and enhance quality.
• Design and procure necessary manufacturing equipment and tooling.
• Determine the required production capacity and allocate resources accordingly.
• Plan and design the manufacturing facility layout for optimal workflow and efficiency.
• Oversee pilot production runs to identify and address potential issues.
• Validate processes to ensure they meet product specifications and quality standards.
• Implement quality control measures to ensure product consistency.
• Drive continuous improvement initiatives to enhance product quality and process efficiency.
• Investigate and resolve quality issues.

Requirements:

• Degree / Diploma in Mechanical/Electrical/Mechatronics
• 1-4 years of relevant experience preferably in Assembly of Equipment or Test area preferably in Semiconductor Industry
• Experience in maintaining the Quality of Work
• Knowledge of Material BOM’s
• Capable of understanding Engineering drawings for Mechatronics-assembly
• Experienced in Manufacturing Engineering Tools (5S, Process Flow, FMEA, System Risk Analysis, DMAIC, 8D, Control Plan, SOP, SOO, Work Instructions, Root Cause Analysis, Capacity versus Demand)
• Experience in Mechanical Fitting, Cable Routing and Installation of Equipment. Preferably in a Semiconductor Equipment Industry.
• Able to use Solid works to design simple fixtures / jigs
• Technical skills must include basic knowledge of mechanical/Electrical/Mechatronics
• Ability to work independently with minimal supervision

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Sales Engineer for the sales of NOV Wireline and Slickline Equipment in the Oil & Gas Industry.

This position is based out of our Loyang Office.

Job Description:

1. To support the growth of the business by providing technical sales support for customers and the regional sales force, including pre and post client interaction throughout the sales process.
2. To support the Regional Sales Manager/Sales Manager in developing and achieving sales plan and maximize sales success.
3. To mentor and guide the peers in technical sales supports, and general sales skills.
4. Develop high level customer relationships for mutual benefit.
5. Maintain and report monthly forecasts on sales orders-in and backlog.
6. Manage collections, report on AR, and act as the escalation point for chasing significantly aging debt.
7. Participate in sales and operational planning activities to ensure market winning lead times and maximize product availability.
8. Ensure compliance with QMS policy and process to ensure the sales process can be audited and remains compliant.
9. Preparation of quotations and supportive information to customer enquiries.
10. Contract review and processing of orders with supportive information and relevant parties.
11. Management of product pricing evaluation.
12. Assist with pricing of products and regional variation to maximize sales potential.
13. Maintain an overview of clients in the region, their contracts and operations.
14. Maintain an overview of competitors, their activities, success and failures, feedback to management.
15. Management of all existing agents on a regional basis.
16. Monthly report to the Management, including quote activity, new orders, new clients, customer feedback and business outlook.
17. Ready for regional travels, including clients visit, seminars etc. (approximately 50%)
18. Other reasonable tasks as directed by your line manager.

Job Requirements:

1. Min Diploma in Engineering or equivalent field.
2. Min 3-5 years experience in similar function and industry.
3. Excellent analytical, written, verbal communications, and documentation skills.
4. Ability to maintain focus and business acumen under sometimes stressful sales/business negotiations.
5. A strong sense of customer focus (internal/external).
6. A candid team player who collaborates with peers to solve problems.
7. Firm and diplomatic when negotiating.
8. Committed to self-improvement and development through the role to achieve career goals.

Work Week & Shift: 6 days, rotating shift

Job Responsibilities:

• Plan, schedule and achieve workshop maintenance production for GSE and/or vehicles
• Manage in-house workforce, and/or outsourced contractor production/shift supervisors, and shift planning

Requirements:

• Able to read, write and communicate in English
• Comfortable with shift work

EA Personnel Name: Nicholas Poh
EA Personnel No: R24123432
EA License No: 16C8443