This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

IT SECURITY engineer

We are a leading Regional IT and Cyber Security system integrator headquartered in Singapore with a presence in Malaysia & the Philippines. We are hiring talented individuals with a positive attitude to join us. We run SOC, a cybersecurity consultancy, and other professional services to local and regional customers.

Primary Functions:

· Responsible for providing technical assistance and support related to computer systems, hardware, or software

· Responds to queries, run diagnostic programs, isolate the problem, and determines and implements a solution

· To ensure that clients get prompt and quality service

· To document troubleshooting and problem-resolution steps

· To participate and provide knowledge transfer to customers when necessary

· Professional services implementation including but not limited to Linux, Wintel Server, Networking, CyberSecurity project implementation

· Create training manuals, documentation, and knowledge transfer documents

· Install and modify computer & Infrastructure based on in-house best practices

· To implement security control on the system and network devices

· Follow up with customers to ensure the issue has been resolved

· Provide technical assistance and support for queries and issues related to computer systems, Local area network (LAN), Wide area network (WAN), and other hardware/software via phone, email, and/or onsite according to stipulated SLA

Requirements and Skills:

· Diploma holder in IT and other IT Security certifications will be a plus

· Minimum 1-year experience in IT

· Fresh graduates are welcome as we will provide relevant training

· A good understanding of IT network, data storage, network, Wintel Server

· Resourceful, creative, independent, and able to work well in a team

· Required to work on-site when necessary

· Taking ownership of technical issues and working with customers and partners to resolve more advanced issues when necessary.

· Good written and verbal skills; excellent phone and email manners.

· Understanding of TCP/IP, OSI Layer, network security, Internet, DNS, network routing, switching, SMTP email, Linux, and Microsoft Windows

Other Information:

· Office Location: 67 Ayer Rajah Crescent #02-10 S139950

· Working hours: Mon-Friday, 9 am-6 pm

· Depending on the season and customer request may require to work outside working hours

· Monthly basic salary commensurate with qualifications and experiences

· Other benefits such as annual leave, medical, insurance, training opportunities, regional exposures, etc

· Additional performance bonus based on individual contribution towards company strategy and its financial performance

Contact: [email protected]

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Over 6 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Responsibilities:

Operate, maintain, and improve various systems in the factory to ensure stable supply and quality for customers.
Handle operation and maintenance tasks for the ice machine and boiler system.
Perform operation and maintenance work for process pipelines and exhaust systems.
Carry out operation and maintenance activities for air conditioning and fire protection systems.
Manage the operation and maintenance of the clean room system.
Lead system improvement projects and execute HOOKUP planning.

Requirements:

Possess a Bachelor's Degree in Environmental Engineering, Chemical Engineering, Aerospace Engineering, Nuclear Engineering, Mechanical Engineering, Electrical and Electronic Engineering, or a related field.
Have a minimum of 1 year of working experience in a similar role.
Possess problem-solving and troubleshooting skills.
Excellent critical thinking skills and a high level of numeracy.
Demonstrate good communication and interpersonal skills.
Capable of working independently and handling stress effectively.
Must be willing to perform rotation shifts.

Job Description:

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Collaborate with the team to create technical designs for frontend architectures using React and React Native.
• Develop and maintain frontend components and features for our main products.
• Participate in the development of management platforms related to marketing activities.
• Optimize frontend performance and implement server-side rendering techniques.
• Contribute to the improvement of development processes and coding standards.
• Stay up to date with the latest frontend technologies and best practices.\

Requirements:

• Bachelor's in Computer Science, Engineering or a related field
• Minimum 5 years of experience in Frontend Engineering.
• Experience in React or React Native.
• Experience with frontend performance optimization and server-side rendering.
• Familiarity with build tools like Webpack and Vite.
• Knowledge of Node.js and CSS.
• Excellent problem-solving and debugging skills.
• Strong attention to detail and ability to deliver high-quality code.
• Good communication and collaboration skills.
• Passion for staying up to date with the latest frontend technologies and trends.

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

Role Summary

We are seeking a CIM System Engineer to support the development and deployment of CIM (Computer Integrated Manufacturing) system solutions for 12" fab operations. The role will involve creating automation solutions, establishing key procedures, and enhancing operational efficiency through advanced automation.

Key Responsibilities

• Develop CIM system solutions to automate processes in 12" fab operations.
• Integrate and implement automated system solutions to optimize manufacturing efficiency.
• Establish procedures for the operation and development of fully automated systems, ensuring smooth deployment.
• Implement and optimize automation systems to enhance productivity and reduce operational costs.
• Introduce predictive maintenance and monitoring systems to ensure continuous operation and minimize downtime.

Qualifications

• Bachelor’s or higher degree in Computer Science, Electrical, Mechanical, or Industrial Engineering.
• Experience with CIM, MES, FactoryWork300, C++, C#, Java, ASP.Net, .Net, or other automation technologies.
• Excellent interpersonal, written, and verbal communication skills.
• Ability to effectively multitask and solve complex problems efficiently.
• Enthusiastic, with a strong collaborative team-player mindset.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Job Summary:

We are seeking a highly skilled and experienced Senior Sales Engineer to lead our front sales activities in the Polymer and Crystallization (POFC) sectors. The ideal candidate will have a strong technical background, excellent communication skills, and a proven track record in sales.

Main Tasks and Key Responsibilities:

• Undertake sales and marketing of Sulzer Polymer and Crystallization Technology in Japan.
• Focal point for Sulzer Crystallization Technology in Southeast Asia.
• Develop and execute sales strategies to achieve sales targets and expand our customer base in the Polymer and Crystallization markets.
• Identify and engage with potential clients, understanding their needs and providing tailored solutions.
• Conduct technical presentations to showcase the benefits and features of Sulzer Polymer and Crystallization Technology.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer prior to order stage.
• Co-ordinate all proposal activities with Process, and Product-line Management teams to ensure customer requirements are met.
• Deliver sales proposals, negotiate contracts, and close deals.
• Follow up projects monthly and update CRM daily.
• Assist Project Management and Engineering during project execution.
• Stay updated on industry trends, market conditions, and competitor activities.
• Involved in organization of marketing activities such as tradeshow, conference and digital content.
• Any other duties that are assigned by superior.
• 40% travelling is expected.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Roles & Responsibilities:

1. Coordination with Construction team/ Design Consultant/PE/construction subcontractor, etc. for Detail Design Development.

2. Carry out detailed analysis and design of civil, structural, and geotechnical works.

3. Prepare design calculation reports and structural drawings for authorities' submissions.

4. Planning relevant temporary civil structure, plan & section required for the Traffic diversion, such as Drain diversion, Retaining wall, shop drawing development.

5. Review and planning for ERSS system for Underground structure using Diaphragm wall such as KP, Decking, Strutting, decking, etc.

6. Check/Rectification of all the structural drawing/ shop drawing if required

Requirements and relevant experience are as below:

1. Bachelor’s / Master’s Degree of Civil Engineering or close discipline from a recognized Institution.

2. Strong engineering fundamental and analytical skills in geotechnical and structural analysis and design works is an advantage.

3. Good knowledge of the application of design and drafting software.

4. Minimum 5 years of experience in Civil and Structural Engineering especially for LTA Project.

5. Be well-aware of Traffic Diversion, Temp. Drain Diversion, and authority approval procedure.

6. Be well-aware of Underground Structure/Construction Sequences and related civil design works.

7. Be well-aware of Eurocode, LTA CDC, and relevant design specification/standards.

* Candidates who has experience as CS engineer (Design) in D&B contractor side would be an advantage.

* Interested applicants are required to submit their detailed CV and state their current and expected salary.

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.

As a Full Stack Developer, you will design, develop, and deploy robust, secure, and user-centric applications while leveraging the power of cloud technologies. You will work across the entire tech stack, ensuring our applications are scalable, efficient, and aligned with business goals.

Location:

Singapore

Key Responsibilities:

• Develop Full-Stack Applications: Design, build, and maintain responsive front-end interfaces and secure, scalable back-end services.
• Cloud Integration: Leverage cloud platforms (AWS, Azure, Google Cloud) to develop and deploy cloud-native solutions, ensuring optimal scalability and performance.
• Collaborate Across Teams: Work closely with product managers, designers, and DevOps engineers to deliver seamless user experiences.
• Optimize Performance: Ensure applications perform reliably under high usage, implementing best practices for scalability and security.
• Innovate: Stay ahead of industry trends and bring new ideas to enhance our offerings.

Requirements:

• 8+ years in full-stack development with expertise in front-end frameworks (React, Angular, or Vue.js) and back-end technologies (Node.js, Python, Go, etc.).
• Hands-on experience with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of CI/CD pipelines and DevOps tools.
• Proficiency in building RESTful APIs and microservices architecture.
• Familiarity with containerization (Docker, Kubernetes) and serverless computing.
• Experience with both SQL and NoSQL databases.
• Excellent problem-solving and analytical abilities.
• Strong communication skills to work effectively with cross-functional teams.
• Self-motivated, team-oriented, and driven to innovate.
• A natural curiosity for new technologies and trends in cloud computing and software development.

We are a global leader in sports vision technology, powered by a team that believes in failing fast, learning faster, and winning as a team. At Rapsodo, you'll thrive in a culture driven by customer focus, achieving more with less, and redefining what's possible. If you are eager to work independently while contributing to a dynamic, innovative, and passionate team, we encourage you to submit your application.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

• Manage Field Service Representatives, the regional schedule as well as the local Service organization business goals and objectives
• Work closely with his team of field service staff in Singapore and beyond, to schedule, dispatch & coordinate their work assignments, and resolve scheduling conflicts
• Make data-driven decisions based on reporting from the company’s CRM system (C4C)
• Disseminate information to the field and maintain intradepartmental communication through written correspondence and regular conference calls
• Ensure compliance of field service staff with safety and performance standards, company and department policies, as well as business objectives
• Develop service quality standards, skills certification criteria, performance objectives and metrics related to field service
• Monitor staff performance and initiate correction action to resolve performance deficiencies through coaching, training, motivating, and disciplining
• Travel with field service representatives on a periodic basis to evaluate and improve performance
• Solicit customer feedback on SLM Solutions service performance through regular telephone interviews, e-mail correspondence and customer site visits
• Evaluate service requirements of the install base and maintain regional assignments and proper resource allocation to ensure satisfactory customer response
• Maintain complete and accurate records of field service activities
• Analyze field service performance data,produce status and summary reports as required
• Establish policies and procedures for producing effective service response and problem resolution for SLM Solutions customers
• Provide direction to field service staff to ensure complete implementation and compliance with department processes

Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

AIDRIVERS is paving the way to revolutionize mobility with advancing robotics and automotive technology in industrial applications making it; efficient, safer and smarter.

In this role, you will collaborate with our team of world-class engineers and researchers with diverse backgrounds in areas such as robotics, mechatronics and autonomous navigation software stack.

Responsibilities Includes:

• Awareness and knowledge of sensors, communication technologies, or control devices for various automation solutions

• Use of appropriate communication protocol such as Ethernet, CAN Bus and wireless

• Design, develop, or implement control logics or algorithms for electromechanical or pneumatic devices or systems

• Conduct studies to determine the feasibility and performance benefits of new mechatronic systems

• Calibrate sensors, automated systems, control systems, or system components to maximize efficiency of automation

• Consider safety, reliability and accuracy of the system at all times

• PLC programming for embedded logic programming

• Design Unit, Integration and Regression test cases

• Test commissioning and result documentation and reporting using appropriate means

Skill set required:

Essential:

• BSc/ Eng level or higher qualification or above in mechatronics engineering from a respected organisation

• 2+ years’ experience in the field.

• Experience and understanding of CAN, Ethernet and other communications technologies

• Experience of controller programming languages: structural or ladder logic

• Able to understand electrical systems and schematics

• Familiarity / working with sensors and sensor calibration

• Good English spoken and written skills

• Desire to learn and improve all the time

Desirable:

• Experience and working knowledge of automotive systems

• Experience / knowledge of hydraulic and pneumatic systems

• Experience of programming languages C, C++

• Experience IFM PLC

Job Capsule

In accordance with established policies, procedures and standards, is responsible for the activities related to an assigned organizational element, program, project or task. Will normally plan, conduct and supervise engineering design reviews and analysis assignments involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or scientific field. Project work and assignments may be broad in nature requiring ingenuity and cross functional coordination.

Job Duties/Roles

1. Provides day-to-day leadership of Engineering staff assigned. Assigns projects to Engineers and monitors the progress of all assigned projects. Ensures the delivery of high quality service and maintenance of good customer relations.

2. Devises new approaches to problems encountered and makes recommendations for changes in methods, procedures or design where necessary.

3. Monitors the technical quality, content, consistency, continuity and timeliness of action of all assigned projects.

4. Applies intensive and diversified knowledge of engineering principles and practices in broad areas of technical responsibility. Performs engineering reviews and analyses when necessary. Reviews other engineers' work and provides appropriate guidance and training when necessary.

5. Participates in the development and changes of Rules. Advises assigned staff in matters related to the application of Rules and Regulations.

6. Prepares written response to clients in accordance with established procedures.

7. Maintains liaison with other engineering specialists internally and externally.

8. Monitors the performance, development potential and training needs of engineers assigned. Keeps management informed of manpower needs.

9. Develops or assists in the development of qualification statements, proposals, bids and other presentation materials.

10. Implements and maintains the ABS Health, Safety, Quality & Environmental Management Systems within assigned area of responsibility.

11. Prepares accurate billing to clients.

Knowledge, Skills and Abilities Required (KSAR)

1. Should have advanced practical industry related experience.

2. Knowledge of related technical disciplines.

3. Knowledge of applicable Rules and Regulations and impact of Rule applications and interpretations.

4. Knowledge of company business policies and procedures.

5. The human relations skills necessary to maintain positive client contacts and provide leadership and motivation to subordinate staff and peers.

6. Ability to effectively communicate orally and in writing.

7. Ability to identify, analyze and solve complex or unique engineering problems.

8. Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.

9. A working knowledge of the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Who Are We?

HoYoverse is committed to providing immersive virtual world experiences to players around the world. We have brought fans popular games including Genshin Impact, Honkai: Star Rail, Honkai Impact 3rd, Tears of Themis, and Zenless Zone Zero, as well as a wide range of entertainment content.
‌
Community is at the heart of everything we do. We are devoted to engaging fans and fostering an enthusiastic and inclusive global community that provides access and encouragement for people to share their passion for ACG (Animation, Comics, and Games) through their own creativity and skills.
‌
Pushing the boundaries of imagination, we consistently explore cutting-edge game development technologies, and have accumulated leading technical capabilities in cel shading, cloud gaming, and other fields.
‌
In the future, we will continue to expand our content production, technology research, and publishing duties through operations in offices in Singapore, Montreal, Los Angeles, Tokyo, Seoul, and other areas.

When you apply to a position with HoYoverse, we will process your personal data. To learn more about how we process your data, we encourage you to review our comprehensive Global Applicant and Candidate Privacy Policy. This policy provides detailed insights into how your information is collected, used, and protected throughout the application process.

What You Will Do:

• Collaborate with top-tier game R&D teams to implement comprehensive risk management strategies, ensuring quality assurance from the design phase through to the game launch.
• Experience the gameplay design, leveraging your extensive gaming experience to provide constructive feedback aimed at elevating the user experience.
• Utilize a range of tools and methodologies to conduct thorough and meticulous game testing. Follow up on issue resolutions to ensure a seamless game launch.
• Uphold and maintain stringent standards at all times, continually striving to enhance R&D processes. This effort aims to improve team efficiency and the quality of outputs, thereby contributing to the development of first-rate products.

What We Are Looking For:

• Passion for games and extensive gaming experience, with high standards for game quality. Hardcore gamers are preferred.
• Exceptional logical thinking skills with a strong aptitude for learning; be patient, detail-oriented, accountable, and adept at identifying and resolving issues.
• Strong communication skills, coupled with the ability to drive progress and collaborate effectively within a team; ability to perform well under pressure.

Bonus Points:

• Foundational knowledge in computer science and programming skills.

We are an equal opportunity employer that believes diverse backgrounds are key to bringing our concepts to life. If you're looking to play a key role in creating the best immersive virtual world experience for our users, we invite you to join our team.

Job Responsibilities

• Ensure the smooth operation of assigned systems, being available for on-call duties and overtime work for emergency handling or urgent needs.
• Perform routine system maintenance and upgrades.
• Efficiently handle user requests and provide excellent customer support to resolve IT-related issues.
• Take responsibility for or assist in project implementation.

Job Requirements

• Possess at least a bachelor's degree in information technology engineering, computer science, applied mathematics and others engineering related.
• Preferred qualifications include relevant certification(s) or work experience in the following areas:

1 year+ experience in VDI (Virtual Desktop Infrastructure) administration; Or,

1 year+ experience in Windows server/IIS/AD administration; Or,

1 year+ experience in OA (Office Automation) helpdesk-related roles.

1 year+ of cabling-related experience.

• Basic knowledge of Windows server administration is required.
• Basic knowledge of VDI administration is required.
• Experience in Windows file server, print server, DNS, and AD administration is preferred.
• Experience in VDI management is preferred.
• Demonstrates a positive and aggressive mindset, with the ability to thrive in a high-pressure work environment.

Job Responsibilities

• Ensure the smooth operation of assigned systems, being available for on-call duties and overtime work for emergency handling or urgent needs.
• Perform routine system maintenance and upgrades.
• Efficiently handle user requests and provide excellent customer support to resolve IT-related issues.
• Take responsibility for or assist in project implementation.

Job Requirements

• Possess at least a bachelor's degree in information technology engineering, computer science, applied mathematics and others engineering related.
• Preferred qualifications include relevant certification(s) or work experience in the following areas:

1. 1-year + Cisco network administration experiences; or
2. Cisco certification, like CCNP, CCIE, etc.; or
3. 1-year + IT working experiences in semiconductor factory.

• Possess basic knowledge of Windows/Unix operations.
• Experience in network management or certifications in related fields are preferred, especially Cisco-related experience.
• Demonstrates a positive and aggressive mindset, with the ability to thrive in a high-pressure work environment.

Responsibilities:

1、Responsible for the research and development of algorithms for wireless IC such as baseband algorithm, positioning algorithm, bioradar algorithm, and motor control algorithm.

2、Complete design documents, support hardware development, participate in testing, analyze and solve various problems encountered in actual development.

Requirements:

1. Majors in signal processing, microelectronics, communication, computer, control, automation, applied mathematics, etc.

2. Master's degree or above.

3. Experience in wireless IC design is a plus.

4. Good English skills, communication skills, and willingness to work with a global team;

5. Good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment.

6. Fresh MS graduates are welcome.