The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Project Overview

SMART M3S is undertaking a project that includes three key work streams:

1) Content: Developing an ontology encompassing various activities, actors, and processes arranged systematically. This involves:

• Extracting content from databases like the Department of Labor's O*Net.
• Human Curation and editing.
• Utilizing Large Language Models(LLMs) for content generation.
• Applying machine learning and statistical techniques to identify clusters of similar activities.

2) Software Tools: Creating a suite of software tools to :

• Browse, edit, and search the online knowledge base.
• Extract content from diverse sources.
• Facilitate human review.
• Integrate LLMs for content generation.
• Support applications demonstrating the ontology's usefulness.

3) Applications: Developing proof-of-concept applications by the end of the one-year project to showcase the ontology's utility. Potential areas include:

• Rapid identification of use cases for generative AI tools.
• Automated generation of detailed workflows and task assignments.
• Stimulating human creativity to address business and societal challenges like climate change and democratic processes.

Responsibilities

The Full Stack Developer will perform the following:

• Design, develop and maintain software tools essential for creating and managing the ontology and its applications.
• Work closely with a multidisciplinary team of researchers, developers, and content specialists.
• Integrate Large Language Models into software applications to enhance functionality.
• Optimize existing codebases for performance and scalability.
• Conduct code reviews, write unit tests, and ensure software reliability.

Requirements

• Bachelor's Degree with proven experience and a strong portfolio
• Deep knowledge and hands-on experience with the following technologies:

1) Frontend:

• Next.js
• TypeScript
• MUI (Material-UI)
• D3.js

2) Backend:

• Node.js
• Firebase and Firebase Cloud Firestore

3) Testing:

• Jest
• Cypress
• Proficiency in LLM Prompt Engineering.
• Excellent analytical and problem-solving skills.
• Ability to work independently and collaboratively in a team environment.
• Strong verbal and written communication skills.

_________________________________________________________________

Applicants are required to complete the following as part of the screening process:

1) Clone and Optimize

-Clone this code sandbox (https://codesandbox.io/p/sandbox/react-usestate-update-nested-in-another-usestate-functional-update-r4lwq0?file=%2Fsrc%2FApp.js)

-Optimize the code for performance and readability.

2) Submit Solution:

-Provide the URL to your optimized solution.

-Include a detailed description of the optimizations made and the reasoning behind them.

GitHub Respository: Link to your GitHub profile showcasing relevant projects.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to conduct research characterizing airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Experience in applying data analytics, machine learning and handling big data
• Experience in applying Pythons functions of matplotlib, and numPy, pandas, statsmodels
• Fast learner - capable of conducting independent research and proficient literature search, review & summary with strong background in Chemical Engineering / Chemistry / Physics
• Experience in operating instruments measuring physical and/or chemical properties of airborne pollutants
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

The role of the Principal Engineer is to assist the Head of MRO in planning and supervise MRO engineer. This role also needs to ensure and adherence to safety regulations, industry standards and trade compliance activities is carried out.

Primary Duties:

Reporting to Head of MRO, you will have the following key responsibilities:

• Assist the MRO Head in planning and executing MRO strategies, ensuring all activities align with organizational goals.
• Supervise MRO engineers, providing guidance and support to foster a high-performance culture within the team.
• Coordinate and liaise with customers on any MRO related matters.
• Identify areas for process improvement and implement best practices to enhance operational efficiency and reduce downtime.
• Ensure adherence to safety regulations, industry standards, and organizational policies throughout MRO operations.
• Assist in the development and management of the MRO budget, tracking expenditure and identifying cost-saving opportunities.
• Analyze maintenance metrics and performance indicators to inform decision-making and improve reliability of equipment.
• Liaise with suppliers and service providers to ensure timely availability of parts and services needed for maintenance activities.
• Support the training and development of MRO staff to enhance skills and knowledge in maintenance practices.
• Ensure adherence to all domestic and international trade regulations, including customs laws, export controls, and sanctions.
• Perform regular audits of trade activities and transactions and prepare reports for management and regulatory bodies.
• Oversee the maintenance of accurate and comprehensive records related to trade compliance activities

Key Attributes and Skills:

• Strong leadership and interpersonal skills.
• Excellent analytical and problem-solving Abilities.
• Strong organization skills with the ability to manage multiple priorities.
• Effective communication skills, both written and verbal.

Qualifications and Experience and Requirements:

• Bachelor’s degree in Electronics, Electrical, Mechanical Engineering, or a related field.
• Strong knowledge of international trade regulations, export controls, and customs compliance. (e.g. ITAR) or a related role is an advantage.
• Occasional overseas travelling is required.

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

About your role

• Collaborate with senior application engineers and robotics experts to implement robotic software solutions for various industrial applications.
• Assist in configuring robotic systems to meet specific client needs, ensuring optimal performance and functionality.
• Support the integration of robotic hardware, sensors, and software components to create comprehensive industrial automation solutions.
• Participate in the creation of detailed technical documentation, including user manuals, guides, and system specifications.
• Assist in troubleshooting technical issues and providing timely solutions to ensure smooth operation of robotic systems.
• Collaborate with cross-functional teams to gather requirements, provide technical insights, and ensure successful project execution.
• Learn and develop expertise in the company’s proprietary robotic systems and technologies.
• Stay informed about the latest developments in industrial robotics and automation to contribute fresh ideas to projects.
• Adapt and learn quickly to new tools, technologies, and processes as required.

Requirements

• Bachelor's degree in Engineering, Robotics, Computer Science, or a related field.
• Basic understanding of industrial robotics concepts and principles.
• Strong problem-solving skills and an ability to work collaboratively in a team environment.
• Interest in automation, robotics, and industrial applications.
• Good communication skills to effectively share ideas and collaborate with team members.
• Attention to detail and a commitment to producing high-quality work.
• Open to travel overseas for deployments.

Nice to Have

• Familiarity with robotic hardware components and sensors.
• Previous experience with robotic programming or automation projects.
• Understanding of control systems and sensors used in industrial automation.
• Knowledge of CAD software for basic mechanical design tasks.
• Passion for technology, robotics, and innovation.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Please apply here: https://talent.sage.hr/jobs/b0aa80ab-6951-4717-b49e-37ac3c199206

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Machine Learning Research Engineers with the following backgrounds:

- Generative Modelling (particularly LLMs and multi-Agent systems)

- Data science

- High-performance Computing

- Data-driven personalised healthcare

- Model-based personalised healthcare (e.g. pharmokinetic modelling)

- Translational and regulatory expertise in medical devices

As a Machine Learning Research Engineer, the successful candidate will contribute to the programme by developing and implementing novel machine learning algorithms with focus on security and data privacy, as well as translating recent AI advancements to the healthcare setting.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Responsibilities

1. Classify the received Parts into self-repair/outside-repair/Stage/Scrap/Return and place them on the corresponding racks of each Category, and convert the ePMS Level 1 order into a Level 2 order.
2. Open bidding and repair the Parts to be sent to the manufacturer for repair, and convert the ePMS second-level order into a third-level order and issue a warehouse receipt.
3. Each unit listed on the front of the maintenance will be sent to the Parts for repair, and after completion, the ePMS secondary order will be converted into a closed case and returned to the warehouse
4. FAB Urgent case support : The original factory has no ingredients, or the unit price is very high and the seasoning is urgently needed
5. Track and manage the progress of the repaired items sent by the manufacturer for repair, and control the Parts Repair work for Cycle time; provide USER query
6. Key/Special Component Sourcing (for Parts that are discontinued or unreasonably priced).
7. Parts Sourcing / Replacement Solution for Old Discontinued Machines

Qualifications

1. Possess at least a Bachelor's Degree in Electrical and Electronic Engineering.
2. Minimum 2 years relevant work experience in semiconductor related technology equipment maintenance.
3. Knowledge of Servo control loop will be an advantage.
4. Good communication and interpersonal skills.
5. Able to work independently and able to handle stress effectively.

Please apply here: https://talent.sage.hr/jobs/55729b46-20ca-4792-9df2-360f30fbb5e3

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Research Software Engineers with the following backgrounds and experience:

- Full-stack Software Development

- Distributed Systems

- Hospital Information Systems and Healthcare Applications

- Cybersecurity and Software Security

- High-performance Computing

- Network/System Administration

As a Research Software Engineer, the successful candidate will contribute to these developments by producing software tools, platforms and libraries as vehicles to carry out impactful research, develop engaging and interactive demonstrators and translate early-stage research prototypes into robust and usable applications.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Engineer (Terminal Operations Maintenance)

As a key member in the Terminal Operations team, you will assist to oversee the maintenance activities of the terminal with specific attention to quality, safety and emergency, compliance with regulatory / insurance / statutory requirements, and other administrative functions, hence, ensures division remains a profit centre for the organisation.

Job Responsibilities:

· Develop and oversee preventive maintenance schedules to ensure fuel storage tanks, pipelines, and associated equipment function optimally.

· Coordinate regular inspections and manage maintenance activities and resources to avoid disruptions in storage operations.

· Ensure the availability of the terminal and equipment is maximised.

· Ensure all maintenance work complies with industry regulations, environmental standards, and safety protocols.

· Conduct risk assessments and implement safety procedures, emergency response plans, and training for team members.

· Coordinate and lead relevant functional stakeholders on diagnostic checks and perform repairs on mechanical, electrical, and control systems associated with storage tanks and fuel distribution.

· Respond swiftly to any issues to minimize downtime and maintain operational efficiency.

· Maintain detailed records of maintenance activities, inspections, and repairs, and prepare reports on facility performance and safety compliance.

· Ensure documentation is current for regulatory audits, inspections, and internal reviews.

· Assist Tank Management leadership in formulating and executing of Tank Management Maintenance Strategy.

· Lead and update the Maintenance Management System of all maintenance master data such as assets master, equipment master, maintenance checklists, maintenance schedules.

· Identify opportunities to improve efficiency and reduce costs, while enhancing the reliability and safety of fuel storage operations.

· Stay updated on industry best practices, new technologies, and regulatory changes to keep maintenance practices current.

· Foster a safety-first culture by providing ongoing training on protocols, equipment usage, and emergency response.

Job Requirements:

All Candidates

• Fresh graduates are welcome to apply.
• Degree or Diploma in Mechanical Engineering or equivalent.
• 2 to 3 years of relevant experience is a plus.
• Demonstrates strong management and leadership qualities, with the ability to work independently and think critically.
• Self-motivated, resourceful, and committed to continuous self-improvement, with strong analytical and communication skills.
• Possesses good working knowledge of safety and statutory requirements.
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve maintenance issues under time-sensitive conditions.
• Available to be on standby after office hours in response to any emergency.

Experienced Candidates

• Prior experience in a supervisory or lead role, especially in maintenance, with proven team coordination and communication skills is advantageous.
• Strong technical aptitude in maintaining and repairing fuel storage systems, including tanks, pumps, valves, and piping.
• Ability to interpret technical drawings, schematics, and manuals related to fuel storage systems.
• Competence in conducting risk assessments, identifying potential hazards, and implementing preventive safety measures.
• Experience in Maintenance, Repair, and Overhaul (MRO) activities.
• Familiar with using maintenance management systems such as Maximo and SAP.

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is recruiting a Research Engineer. The successful candidate will work on experiments and numerical modelling of 3D breaking waves and wave-current interaction. The candidate should have strong knowledge background in terms of waves, currents, turbulence, etc. Experience with experiments and CFD model will be advantageous. Only shortlisted applicants will be notified.

Job Requirements

• Possess at least a Masters degree in Civil Engineering with related research experience.
• Candidates with background in fluid mechanics, coastal and ocean engineering, experimental methods are encouraged to apply.
• Strong written and spoken communications.
• Good in quantitative analysis.
• Strong written and spoken communications.
• Good knowledge of CFD analysis and programming skill is an advantage.
• Open to fixed-term contract.

Job Summary :

We are seeking a highly skilled Developer for the role of Project Manager - The ideal candidate will have extensive experience in PEGA frameworks, case management, user experience, data and integration, application development, and platform.

Required Skills :

Technical Skills :

• PEGA Frameworks , Pega Case Management , Pega User Experience , Pega Data and Integration , Pega Application Development .

Roles & Responsibilities :

• Project Manager of 8-12 years experiences and Pega 5-8 years of experience.
• Leading a team of Pega Developers
• Support existing Pega application with ticket resolution within the defined SLA
• Develop and implement PEGA-based solutions to meet business requirements as part of enhancements and/or service requests
• Provide expertise in PEGA frameworks, ensuring robust and scalable application architecture.
• Utilize PEGA Case Management to streamline and automate business processes, enhancing operational efficiency.
• Design intuitive and user-friendly interfaces using PEGA User Experience principles.
• Integrate PEGA applications with various data sources and external systems to ensure seamless data flow.
• Collaborate with cross-functional teams to define and implement integration strategies and solutions.
• Conduct thorough testing and debugging of PEGA applications to ensure high performance and reliability.
• Provide technical support and troubleshooting for PEGA applications, addressing any issues promptly.
• Document all development processes, configurations, and changes for future reference and compliance.
• Stay updated with the latest PEGA platform updates and industry best practices to continuously improve solutions.
• Contribute to the overall success of the project by delivering high-quality solutions that meet client expectations.
• Demonstrate expertise in PEGA Case Management, including the ability to design and implement complex workflows.
• Showcase proficiency in PEGA User Experience, creating user-centric designs that enhance usability.
• Have experience in PEGA Data and Integration, ensuring seamless connectivity with various data sources.
• Exhibit strong skill in PEGA Application Development, from initial design to final deployment.

Certification(s) Required :

• Certified Pega System Architect (CSA), Certified Pega Senior System Architect (CSSA)

• To service existing accounts, activate and develop new user’s accounts
• To provide after-sales-support to customers
• Providing technical support to customers if necessary (training will be provided)
• Products demonstration & presentation
• Attractive renumeration/commission schemes
• ITE/DIPLOMA with 3 to 5 years outdoor sales experience
• Ability to communicate in Mandarin & English; Product presentation in English

Our client is a global leader committed to continuously deliver innovations to customers’ businesses worldwide, for creating innovative and fulfilling workplaces by effectively adopting information and knowledge through digital transformation (DX). They have pioneered numerous technologies and accumulated expertise since their establishment in 1962, to build an environment that encourages the use of one’s creativity to maximize organizational strengths. Their portfolio includes conducting R&D, manufacturing and sales of world-class workflow solutions, IT services, and printing equipment such as digital multifunction printers (MFPs). They also offer business process outsourcing (BPO) services as well as marketing and implementation support of Enterprise Resource Planning (ERP) systems.

PURPOSE:

The candidate is responsible for 2nd and 3rd level technical support for Managed Print Services offerings, technologies and also Project based activities as the Technical Lead. This is a regional role that is both customer and internal facing across Fujifilm APAC entities.

RESPONSIBILITIES & TASKS:

• As part of the team, you will be involved in managing tickets from start to finish to support country based technical staff.
• Support business side as an SME including meetings with customer IT teams.
• Manage the technical aspects of product launch which involves installing, testing, learning and understanding the software, understanding its purpose and the preparation of required documents and training material as well deliver required training to meet the business needs.
• Evaluate innovation opportunities of existing service offerings, bringing technological aspects of product integration and value add services.
• Providing technical support on deals from RFP, contracting, implementation through to BAU where needed.
• You will also support UAT and release management of the core software used for service delivery.
• Responsibilities will varies based on business dynamics and expected adoption to changing requirements and demands is necessary.

Additional Roles & Responsibilities:

Based on your performance, you will undertake a larger responsibility in leading key service initiative and solution 3rd level support that is key to FujiFilm business.

• Be part of the leading team in supporting Guardia 3rd level operation support across countries’ implementation.
• Undertake key feature testing and validation of ALL regional services that falls under the purview of the Technology Management team.
• Provide Technical Service support during BAU for all customer account in the region.
• Provide Technical leadership in key customers projects.

Requirements:

• At least 8 years’ experience in a technical lead role.
• Good experience and understanding of Microsoft Infrastructure Technology platforms like DNS, DHCP and AD services.
• At least 5 years proven experience in troubleshooting technology incidents and problem management.
• Degree in information technology, engineering or equivalent
• ITIL, TOGAF and Infrastructure/Network Security technologies certification would be an advantage.
• Cloud technology experience, esp Azure and AWS
• Experience with Ysoft SafeQ 6
• Good understanding of PKI technologies and concepts
• Experience in delivering training
• Experience in leading technology transformation projects in a cross functional domain experts’ environment
• Experience with Windows Server environment
• Experience with IIS and MSQL
• Knowledge of networking, ports, and protocols.

Interested candidates who wish to apply for the position, please click "Apply".

EA Licence No: 11C5502

EA Registration Number: R23118280

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

We are seeking a driven and resourceful Sales Coordinator to boost sales of our innovative early childhood education products. This role focuses on both B2B (Preschools) and B2C (Parents) marketing channels and offers attractive commission-based earnings for the right candidate.

Your Role at a Glance:

• Promote our products through word-of-mouth, traditional marketing, and creative outreach strategies.
• Develop and execute targeted referral programs to drive growth among parents and preschools.
• Leverage social media platforms to expand brand visibility and product awareness.
• Build and nurture relationships with preschools (B2B) and parents (B2C) to enhance sales opportunities.

Are you the one?

• Proven experience in traditional marketing, word-of-mouth campaigns, and referral program execution.
• Existing contacts in preschools (B2B) and parent communities (B2C).
• Excellent communication, persuasion, and relationship-building skills.
• Self-motivated, able to work independently as a freelancer.
• Comfortable with a commission-based pay structure and driven by results.

If you have a strong network within preschools and parent communities, along with the marketing skills to make an impact, we want to hear from you!

Apply only if you are comfortable with commission-based earnings and possess the relevant experience and contacts.

Looking forward to your applications!

Send in your resumes to: [email protected]

We are looking for Shared Services Support Specialist, they are responsible for ensuring smooth onboarding of new employees by providing necessary IT equipment, managing access cards, and assisting with facilities and tenant management. This role also supports organizing company events and coordinating cafeteria operations to ensure a positive and productive workplace environment.

Roles & Responsibilities

1. IT Onboarding:

• Coordinate with HR and IT departments to ensure new employees are set up with the necessary IT equipment (laptops, phones, software, etc.) and user accounts.
• Assist in troubleshooting IT-related issues for new employees during their first days.
• Ensure smooth access to internal systems, tools, and network setups for new hires.

2. Access Card Management:

• Issue and manage access cards for employees, contractors, and visitors.
• Maintain access control records, ensuring security protocols are followed for issuing, retrieving, and deactivating cards.
• Work with security and facilities teams to ensure smooth access for staff and visitors.

3. Facilities and Tenant Management:

• Oversee the maintenance and operation of office spaces, including managing office supplies, furniture, and equipment.
• Collaborate with vendors and service providers to ensure the facilities are running smoothly and meet company requirements.
• Assist in managing relationships with tenants or other external partners in the office building.
• Report maintenance issues and ensure timely resolution.

4. Event Organization:

• Assist in planning, organizing, and coordinating internal company events such as team-building activities, town halls, and corporate celebrations.
• Coordinate event logistics including venue booking, catering, materials preparation, and attendee communication.
• Work with cross-functional teams to execute event plans successfully.

5. Cafeteria Support:

• Provide assistance in the management of the cafeteria or employee food services, ensuring employees have access to quality meals, snacks, and beverages.
• Monitor cafeteria services to ensure cleanliness and high standards.
• Help organize special catering for events or company-wide meetings as needed.

Any ad-hoc duties as assigned.

Requirements

• Minimum Nitec Cert
• Previous experience in IT support, facilities management, or event planning is preferred.
• Strong communication skills and the ability to interact with employees across various levels.
• Organizational skills with attention to detail and the ability to manage multiple tasks.
• Proficiency in Microsoft Office (Excel, Word, PowerPoint) and experience with basic IT troubleshooting.
• Experience with access control systems or similar security tools is a plus.
• Ability to work independently and as part of a team.
• Only Singaporeans are able to apply.

RESPONSIBILITIES:

• Work with customer NPI engineer to understand the newly introduced product base on the design requirement, pre-review the process and actively feedback for potential improvement, and ensure flawless transfer.
• Coordinate NPI activities to different function (Product/Process Engineering Team) prior build.
• Work with Production team to validate process method and parts to be used prior site pilot to make sure all requirements are met.
• Work with Technical support team to make sure all production line requirement (e.g. Jig, fixture, torque drivers etc.) are met.
• Design the in-house fixture/jigs if applicable and provide the design requirement to technical support team for fabrication.
• Provide technical support to production to solve issues encountered during the site pilot and Material Validation Build.
• Ensure smooth handover to mass run by conduct training to related team on new process / WI.
• Ensure all issues and operation feedback are captured, reviewed and follow up for proper closure. Identify opportunity for improvement.
• Assists customer and internal team for Kaizen projects, including 8D and CAPA.
• Performs other related duties as assigned.

REQUIREMENTS:

• Bachelor’s degree in Manufacturing Engineering Technology, or related field required.
• Minimum 2 years experience in manufacturing engineering or relevant field
• Prefer to have server/storage product experience

Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]

------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.