Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiate, implement, and manage the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes adhere to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation
• Make recommendations for improving plant operations and solving production-related problems.
• Train respective subordinates
• Conduct employee performance reviews based on job descriptions
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Job Requirements:

• Higher NITEC in Mechanical Engineering.
• Advanced skills using company software
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Administer and configure infrastructure systems and applications (e.g. Active
• Directory Services, Data Centre, video conferencing, audio system, telephony, server storage, backup, etc.), network devices (Firewall, routers, VPN, internet proxy, wireless, etc.), desktop, mobile devices and other remote devices.
• Ensure systems are backed up automatically, recovery plans and disaster recovery plans and patches are carried out successfully and monitor the systems’ resources usage closely.
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met.
• Draft and update technical documentation such as administration & user guides.
• Provide technical support to both Local and Overseas branches’ users over the LAN and WAN without compromising security.
• Provide L2 support and participate as a team lead or member in projects.

Job Requirements:

• Diploma or Degree in Computer Science, Information Technology, OR/AND Certification in CCNA
• Minimum of 1year of relevant experience
• Proficient in enterprise networking, including WAN, LAN, and VPN optimization implementation and support
• Skilled in administering Microsoft Server 2012 and later, Microsoft 365, and Google Suite products/services
• Familiar with internet architecture designs such as TCP/IP, DNS, DHCP, Proxy and Firewall
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller
• Strong knowledge of Cyber Risk and Cyber Security; familiarity with PDPA is highly advantageous
• Experience with Veeam, VMware, and UNIX/Linux is highly advantageous
• Experience in API/Web Programming and Database Administration is highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Location: pandan road

Working hours: 8.30am to 6.00pm (Mon – Fri)

Company transport is provided from Clementi MRT (one way) Basic salary: up to $4700/mth depending on years of experience

Mobile reimbursement of up to $50/mth

Job Highlights & Staff Benefits

* Subsidiary of a Company listed on SGX-ST with a stable revenue stream and growth

* potential

* Annual performance bonus

* Annual increment

* Team bonding activities and birthday vouchers

* Leave, Medical and Dental benefits

* Education sponsorship and fully paid external training

* As a key member of the IT Team, the candidate will play a pivotal role in maintaining and

* optimizing infrastructure systems across multiple locations, locally and overseas.

Responsibilities:

* Administer and configure infrastructure systems and applications (e.g. Active

* Directory Services, Data Centre, video conferencing, audio system, telephony, server

* storage, backup, etc.), network devices (Firewall, routers, VPN, internet proxy,

* wireless, etc.), desktop, mobile devices and other remote devices.

* Ensure systems are backed up automatically, recovery plans and disaster recovery

* plans and patches are carried out successfully and monitor the systems’ resources

* usage closely.

* Liaise with external vendors to ensure Service Level Agreements (SLA) are met.

* Draft and update technical documentation such as administration & user guides.

* Provide technical support to both Local and Overseas branches’ users over the LAN

* and WAN without compromising security.

* Source for products/solutions and vendors/suppliers for required projects.

* Provide L1/L2 support and participate as a team lead or member in projects.

* Requirements:

* Diploma or Degree in Computer Science, Information Technology, OR/AND

* Certification in CCNA

* Minimum of one year of relevant experience

* Proficient in enterprise networking, including WAN, LAN, and VPN optimization

* implementation and support

* Skilled in administering Microsoft Server 2012 and later, Microsoft 365, and Google

* Suite products/services

* Familiar with internet architecture designs such as TCP/IP, DNS, DHCP, Proxy and

* Firewall

* Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless

* AP Controller

* Strong knowledge of CyberRisk and CyberSecurity; familiarity with PDPA is highly

* preferred

* Experience with Veeam, VMware, and UNIX/Linux is an added advantage

* Experience in API/Web Programming and Database Administration is an added

* advantage

* Able to converse in English and Mandarin due to the need to liaise with

* overseas counterparts

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Electrical / Mechanical Engineering.
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

Summary:

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

You will join the 'Thales Gemalto Digital First' project team to push forward the vision of 'Banking as a Service', combining card digitization, onboarding and risk evaluation platforms all in one for financial institutions to deliver optimized mobile-first experience for their customers.

You will be part of the driving force of our DevSecOps transformation, where we envision multiple teams working together on the same code base allowing full autonomy in solving problems presented by our customers.

Responsibilities:

• Implement solutions using Gitlab as a platform for source code, continuous integration and deployment
• Implement frontend component to provide generic secure services and cloud solution
• Be responsible for development/testing/deployment for the overall solution
• Participate in the design, implementation, maintenance, validation and documentation within a Scrum Team.
• Ensure quality metrics are met in terms of performance, scalability, maintainability, reliability.

Requirements:

• Minimum 5 years of relevant work experience in either JavaScript and TypeScript
• Knowledge on Java, version control system (Mercurial/GIT), build system (Jenkins/GITLAB)
• Familiar with agile methodology (Scrum)
• Understand the concept of DevSecOps
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills
• Knowledge in Kubernetes, Splunk, DataDog is a plus
• Knowledge in Docker, NoSQL (DynamoDB/MongoDB), MySQL is a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

OUR COMPANY

RegASK is an AI-driven solution enabling end-to-end intelligent regulatory workflow orchestration: automating regulatory intelligence with curated content and actionable insights, smart documentation and a connected community of over 1,700+ subject matter experts for streamlined regulatory execution globally. RegASK augments Regulatory Affairs teams, combining AI efficiency and community-driven intelligence to streamline compliance across the product lifecycle. The RegASK team is highly diverse, with more than 10 nationalities across 3 continents, entrepreneurial and very agile, We are currently recruiting highly motivated individuals to expand its team and support its ambitious growth plans.

If you are a doer who enjoys working across industries and continents, autonomous in your working style, and eager to problem solve, we would love to hear from you.

THE POSITION

Title: Senior Full Stack Engineer

We are seeking a Senior Full Stack Engineer to work closely with the product team in order to translate their requirements and stories to web applications and functionalities in the platform.

In this role, you will benefit from the mentorship of highly skilled experts and you will be working in a fast-paced environment managing multiple projects at once, which involve stakeholders across the company.

Responsibilities:

• Join the product development team to help translate the requirements and designs into web applications or services using Node.js, Express, React, Mongo and other tools/frameworks as required
• Build scalable architectures to meet different use cases
• Work with QA team to create unit and integration tests to ensure code quality
• Weigh in on feasibility and timelines for feature development and development milestones
• Take charge of existing code base and help refactoring to meet standards where required
• Ensure proper and adequate documentation
• Align to the company’s Culture and show great team work abilities

Requirements:

• 8-10 years of experience, building web applications and services
• 3-5 years of experience with MERN stack, Python a plus
• Experience with production grade deployment a plus
• Ability to work collaboratively
• An eye for detail and the ability to develop adaptive code that can keep up with new requirements
• Strong communication skills

If you are excited about this opportunity and believe you have the skills and qualifications to excel as our Senior Full Stack Engineer, please submit your resume for consideration.

We appreciate all applications, but only selected candidates will be contacted for an interview.

Thank you for considering joining the RegASK team. We look forward to reviewing your application!

Position Summary / Project Description

Data Engineer for cloud migration projects (Primarily utilizing AWS, IDMC, Databricks and Tableau)

Role and Responsibilities

• Develop ETL (Extract, Transform, Load) processes to cleanse, transform, and enrich data, making it suitable for analytical purposes using Databricks' Spark capabilities and Informatica IDMC for data transformation and quality.

• Monitor and optimize data processing and query performance in both AWS and Databricks environments, making necessary adjustments to meet performance and scalability requirements. Utilize Informatica IDMC for optimizing data workflows.

• Implement security best practices and data encryption methods to protect sensitive data in both AWS and Databricks, while ensuring compliance with data privacy regulations. Employ Informatica IDMC for data governance and compliance.

• Implement automation for routine tasks, such as data ingestion, transformation, and monitoring, using AWS services like AWS Step Functions, AWS Lambda, Databricks Jobs, and Informatica IDMC for workflow automation.

• Maintain clear and comprehensive documentation of data infrastructure, pipelines, and configurations in both AWS and Databricks environments, with metadata management facilitated by Informatica IDMC.

• Collaborate with cross-functional teams, including data scientists, analysts, and software engineers, to understand data requirements and deliver appropriate solutions across AWS, Databricks, and Informatica IDMC.

• Identify and resolve data-related issues and provide support to ensure data availability and integrity in both AWS, Databricks, and Informatica IDMC environments.

• Optimize AWS, Databricks, and Informatica resource usage to control costs while meeting performance and scalability requirements.

• Stay up-to-date with AWS, Databricks, Informatica IDMC services, and data engineering best practices to recommend and implement new technologies and techniques.

Requirements / Qualifications

• Bachelor’s or master’s degree in computer science, data engineering, or a related field.

• Minimum 4 years of experience in data engineering, with expertise in AWS services, Databricks, and/or Informatica IDMC.

• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.

• Evaluate potential technical solutions and make recommendations to resolve data issues especially on performance assessment for complex data transformations and long running data processes.

• Strong knowledge of SQL and NoSQL databases.

• Familiarity with data modeling and schema design.

• Excellent problem-solving and analytical skills.

• Strong communication and collaboration skills.

• AWS certifications, Databricks certifications, and Informatica certifications are a plus.

Summary of the role

As a Technical Consulting Analyst, you will manage customer relationships, communicate complex Revenue Management and Dynamic Pricing concepts, and ensure customer satisfaction by solving problems and maintaining trust. You will develop business acumen in airline practices, train customers on best practices, and analyze data to provide insightful reports. Additionally, you will identify upsell opportunities, participate in pre-sales engagements, and contribute to internal and team growth by networking.

In this role you’ll / Your main responsibilities:

• Manage and deliver activities related to Revenue Management and Dynamic Pricing.
• Communicate complex concepts to various audiences.
• Anticipate and eliminate any roadblock to customer satisfaction and business adoption, identify and mitigate with your customer any risk on the project delivery, scope or timeline, articulate and justify accordingly the relevant alternatives and remedies.
• Maintain customer trust.
• Understand airline business practices and our capabilities, identify and implement best practices.
• Train customers on best practices.
• Understand and explain the methodology used in our solutions.
• Analyze and present large datasets to customers.
• Develop business adoption roadmaps.
• Identify upsell opportunities.
• Participate in pre-sales engagements.

About the ideal candidate

• Master’s or university degree in business management, engineering, or operations research.
• Experience in the airline industry (preferably in revenue management, pricing, network planning, or sales and marketing).
• Experience in information technology (preferably in travel and tourism).
• Skills in data science and visualization, and operations research.
• Curious and eager to learn.
• Passionate about the airline industry.
• Customer-centric.
• Accountable and results-driven.
• Flexible, open to changes, and proactive.

Seeking a Frontend Software Engineer to design and implement user interface components for dynamic web applications in ReactJS.

This role involves translating wireframes and mockups into clean, efficient code and collaborating with cross-functional teams to ensure seamless integration with backend services.

You will be responsible for building reusable components, optimizing performance across devices and browsers, and contributing to the development of high-quality, scalable applications.

This is a permanent full-time role

YOUR NEW JOB

• Transform designs into high-quality, responsive Frontend code using ReactJS, HTML5, CSS3, WebSocket
• Develop, test, deploy, & maintain Frontend user interface components with a focus on usability & scalability
• Leverage modern web technologies to create dynamic, interactive web applications
• Build reusable components and frontend libraries to streamline future development
• Optimize web components for performance across a wide array of web-capable devices & browsers
• Collaborate with the design team to enhance overall UI/UX experiences
• Integrate APIs using RESTful services for seamless backend communication
• Work with cross-functional teams to plan, design, & maintain web-based applications built on Java technologies
• Deploy production systems and provide support post-implementation.
• Engage in all phases of the software development lifecycle, ensuring quality and consistency
• Investigate and resolve system issues, ensuring minimal downtime at all times
• Analyze service interdependencies (applications, systems, databases) to identify & address inefficiencies
• Propose and document opportunities for application & process improvements
• Deliver timely solutions while adhering to high development standards

WHAT IS NEEDED FROM YOU

• 3 years hands-on fulltime working experience in ReactJS
• Proven experience in developing web applications, web forms, & enterprise workflows
• 2+ years of expertise in systems analysis, design, and programming
• Hands-on proficiency in:
  Modern JavaScript frameworks such as ReactJS, with a solid understanding of core principles
  JavaScript, including DOM manipulation and modern ECMAScript features
  TypeScript or other type-safe JavaScript variants
  Advanced HTML5 and CSS3
  CSS pre-processors (e.g., SASS, SCSS, LESS) and bundlers (e.g., Webpack)
  RESTful API integration
  Basic knowledge of data structures and algorithms
  Version control systems like Git
• Strong skills in benchmarking and performance optimization
• Fluency in English and Mandarin for effective business communication with Client & Internally

WHAT WILL MAKE YOU STAND OUT

• Experience coding for Mobile Gaming applications
• Mobile App Development Experience (React Native, iOS, Android)
• Experience with WebSocket
• Familiarity with JQuery
• Knowledge of UI/UX design principles
• Understanding of npm & its usage
• Hands-on experience with AWS Services
• Setting up CI/CD Pipelines
• Writing Unit Tests or End To End Testing

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

We are looking for a talented and ambitious candidate to join our team in developing next-generation quantum sensors. The position will focus on modeling the dynamics and fabricating cryogenic components for the superconducting levitation of ferromagnetic particles.

This levitated, freely precessing particle forms a system of correlated spins, capable of rapidly averaging out quantum uncertainty. By harnessing this system, we aim to develop quantum sensors with sensitivities that exceed the standard quantum limit.

This position is based in the Quantum Innovation Centre (Q.Inc) and Institute of Materials Research and Engineering (IMRE). The successful candidate will contribute to a range of innovative activities, including:

Key Responsibilities:

• Modeling the dynamics of the levitated particle
• Microfabrication of the particle, silicon pocket, and superconducting materials
• Learning to operate a dilution refrigerator

Job Requirements:

• Bachelor's or master’s in physics, Applied Physics, Precise Instrumentation, or related fields
• Past experience in the job activities listed above is preferred, but a strong willingness to learn is sufficient. Trainings will be provided.
• Strong motivation for multidisciplinary research
• Prior experience in superconductivity and/or quantum sensing is highly preferred
• Basic programming skills (e.g., Python, MATLAB)
• Mechanical design
• Ability to work as a team and communicate effectively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Position: Project Engineer (Civil and Structural)

Responsibilities:

· To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

· Prepare method statements, design plans, and specifications.

· Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

· Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

· Determine project requirements and estimate resources such as manpower, materials and equipment.

· Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

· Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

· Other job duties as assigned.

Requirements:

• Candidate must possess a Bachelor's Degree in Engineering (Civil and Structural).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologies, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”) series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to the body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1.Understand systematic knowledge training and advanced training projects.

2.Handle physiological signal processing, including chip selection and architecture design, gain and filtering scheme design, embedded development, board making, and testing.

3.Design multi-circuit functional modules and establish the connection between the designed signals and the human body.

Job Requirement:

1.Bachelor's degree or above, majoring in electronic engineering, microelectronics, automation control, electronic information, mechanical engineering, physics, etc., or having project experience in electronics, sensors, etc., with excellent academic performance and solid professional basic knowledge.

2.Skilled in using electronic design software, with a good foundation in analog and digital electronics.

3.Focused, with a curiosity to explore the nature of things and a pursuit of technological excellence.

4.Clear-minded, good at problem-solving, able to quickly track the world's latest scientific research results, and capable of stimulating innovation.

5.Candidates who have participated in electronic design competitions and won awards, and have experience in electronic or sensor-related projects are preferred.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.