Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, or PhD with Min. 5 years’ experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.
3. Ability to converse in Mandarin to liaise with HQ.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 5 years in the software development industry or server infrastructure setup
• At least 3-years’ experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 3 years in the software development industry or server infrastructure setup
• At least 1-year of experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Manage oversight and Quality Assurance (QA) of installation technicians for rack, stack and installation of networking equipment.
• Test and commission routers, optical transport equipment, and other network devices in new and existing network nodes across Google's global network.
• Generate implementation plans and provide technical leadership and guidance during deployment activities.
• Work with project management, network engineering, and rest of the Engineering team to identify in advance potential issues in network installations, including in the areas of facility power Alternating Current/Direct Current. (AC/DC), cooling, security/access, rack layout, and cable management.
• Own network documentation, updating, and maintaining network drawings and plans.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience working with field operation technicians, engineers, contractors, or vendors in a telecommunications environment.
• Experience in collaborating across multiple levels and functions.
• Experience in directing field operation technicians, engineers, contractors or vendors in a telecommunications working environment.
• Ability to engage/influence tactical decision-making.

Summary:

• Quality control engineer (manufacturing company)
• Basic salary up to $4500
• Performance bonus
• 5 days work week @ 8.30 am - 6.00pm
• Location: Serangoon

Key Responsibilities:

• Implement procedures to ensure consistent product quality during the manufacaturing process
• Work with process engineer & engineering team on QC requirements
• Regularly inspecting the materials, components and finished products
• Proper record of the inspection and test results
• Work with QA, process and product team on corrective action with quality issues
• Assist with in-process audit and FQC audit
• Other relevant ad hoc duties

Key Requirements:

• Min Diploma in manufacturing / quality engineering
• Min 1 year of relevant experience in electronics products / manufacturing environment
• Knowledge of ISO 9001, 14001, 13485, 45001, FDA requirement

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Responsibilities

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer. On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Qualification

• Bachelor or Masters in Electrical Engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 1-3 or more years of experience in Semiconductor Manufacturing, Process & Equipment Engineering and/or New Product Introduction.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Organized, meticulous, and strong focus on results.
• Excellent analytical skills
• Excellent communication and written skills

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on Shell research project entitled “Integrated Catalytic Plasma and Membrane Design for Low-Temperature High-Value Olefins Production from Light Hydrocarbons”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.
• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

You are responsible for

MR portfolio

• Perform corrective maintenance, supported when necessary by tier-2 support helpdesk
• Demonstrate commitments to meet customer needs and requirements by ensuring all given quality standards
• Submit timely and accurate service data, job sheets, reports, expense claims, radiation film badges, field problem reports and other paperwork as assigned
• Be aware of customer needs and potential commercial leads (Philips Lifecycle Solutions – PLS) through customer visits and provide feedback and recommendations to the management, relevant people within the organization
• Support the District Customer Services & Operations Manager and the Customer Services Account Manager as appropriate with contract renewals etc.
• Use company property with care to ensure optimal results with minimal operational costs
• Keep abreast of new technologies likely to affect PH range of products
• Be a professional representative for PH with respect to customer problems, ensuring personal acceptability by the customer in appearance and behavior in accordance with PH policy and targets
• Accuracy of service records with particular attention to test & inspection results
• Adopting appropriate ESD control while servicing PH equipment
• Usage of appropriate electronic measurement equipment in calibration controlled cycle
• Responsible for reporting identified device safety issues according to applicable PH quality standard policy
• Responsible for reporting customer feedback according to applicable quality standard policy and follow up relevant assigned quality & regulatory training in a timely manner

To succeed in this role, you’ll need a customer-first attitude and the following

• Diploma/Degree in Biomedical or Electronics Engineering or equivalent
• At least 3 years of working experience in service or engineering roles, preferably in the medical device industry
• Good troubleshooting skills
• Good communication and interpersonal skills

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

The Senior Mechanical Engineer is a leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g. software, mechanical, electronics, system, testing etc) to enable development of baselined and software designs that support the product development and product goals of EOS DS.

The Senior Mechanical Engineer exercises in-depth engineering technical knowledge within or across specialist disciplines and the ability to enable strategic alignment. Adherence to governance and standards and mobilising people to achieve business outcomes with the appropriate levels of integrity, safety and ethics is critical to the role.

The Senior Mechanical Engineer exercises initiative and judgement in the interpretation and application of policy and procedures. The Senior Mechanical Engineer may lead a small team and are responsible for managing, developing and guiding staff to achieve their full potential. They provide a high level of support to their team, in consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

Primary Duties:

Specific Functions & Tasks

• Lead and support a multi-disciplinary team to ensure the timely and professional delivery of project outcomes.
• Produce mechanical designs that enable and satisfy defined requirements in the specified time frames.
• Work with systems engineers to ensure that all requirements are identified, captured and analysed.
• Work with project engineers to ensure design solutions are delivered on time and on budget and meet identified requirements.
• Produce mechanical designs that satisfy defined requirements in the specified time frames.
• Develop, review, update, modify, and approve mechanical design plans and work schedules.
• Prepare and review all documentation required to support designs.
• Perform conceptual design, models and drawings of complex mechanical assemblies.
• Perform FEA of models.
• Document designs including calculations, design options and decisions.
• Conduct design reviews with the view to endorse mechanical design.
• Perform test, evaluation, characterisation, verification & validation of mechanical assembles in collaboration with Test Engineers.
• Prototype mechanical assemblies and systems.
• Work closely with other engineering disciplines to ensure cohesive and complete system designs.
• Apply DFX principles (manufacturability, testability, excellence).
• Outline and assign work, review work for technical accuracy and adequacy and provide guidance and mentorship the Mechanical Engineers.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and communicate strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and enable a high level of leadership and deep industry, defence system knowledge, and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence stakeholders through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Champion the assessment and use of rigorous development and problem-solving methods to enable safe, secure, and reliable solutions to engineering problems.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation and verification activities on integrated system designs and prototypes (including formal check points) to verify and provide recommendations for sign-off of all design requirements to the lead engineer and design authorities based on relevant legislative requirements, standards and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to enable and ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Technology Officer.
• Enable EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide deep engineering judgement for progress and the advancement of sound engineering solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Technology Officer, Chief Engineers and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder.
• Uses experience for sound judgements

Responsibilities:

- Respond promptly to and handle customer requests and queries.

- Resolve incidents by troubleshooting system and network problems, diagnosing and resolving hardware/software issues, and analyzing system logs for potential issues.

- Fulfill change requests, service requests, and close problem tickets, including applying OS updates, patches, and configuration changes.

- Conduct preventive maintenance tasks and vulnerability assessments to ensure security compliance and system hardening.

Requirements:

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- Preferred certifications: CCNA, CCNP, CCIE.

- 1-3 years of experience in network and security management.

- Have experience in supporting firewall and network equipment such as Cisco switches, Check Point, and Palo Alto Networks.

- Strong problem-solving skills and a proactive approach to information security.

- Ability to work independently and collaboratively in a team environment.