Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Position Description:

APAC Linux Build team is responsible for installing, deploying and configuring Red Hat Enterprise Linux (RHEL) for various lines of businesses across APAC. The team plays a central role in collaborating with the project management teams, application owners and other infrastructure teams to provide Enterprise compute services.

A Linux build engineer role is responsible to build servers physical and virtual, provide LOB specific customizations including HA Clustering, provide OS level support for DC migrations and collaborate with project managers to implement solutions that meet business requirements. This role exposes candidate to hardcore technical and troubleshooting skills, working with vendors such as Redhat, Dell and HP.

Key Responsibilities:

• Build and configure servers as per design documents and complete post build tasks and QA checks.
• Work with project management team, application teams, and other infrastructure teams to deliver server builds and configurations
• Provide OS level support and assist in planning for DC migrations projects - VM Migrations, Physical servers Lift and Shift
• Troubleshooting and configuration of the technical environment. Escalating and liaising with additional internal/external groups when required, resulting in satisfactory resolution
• Create, review, maintain and update documentation

Key Requirements:

• 12+ years of experience in RHEL Administration and Configuration
• Strong technical skills and experience in Unix environment: RHEL9 and RHEL8 build, configuration, troubleshooting
• Strong technical skills and experience on Red Hat pacemaker cluster build, configuration, troubleshooting
• Fair understanding on various infrastructure components: Cloud(VMware), Storage(NAS/SAN/EFS), Network(Baronet/DMZ)
• Fair understanding on hardware level: HP, Dell consoles.
• Strong troubleshooting and problem solving skills
• Good written and verbal communication skills to work with project stakeholders
• A good team player
• Scripting experience preferred: Shell scripting/python/Ansible, etc.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

About Us
The National University of Singapore invites applications for Research Assistant (Engineer) in the Alice Lee Centre for Nursing Studies, Yong Loo Lin School of Medicine. The Alice Lee Centre for Nursing studies consist of a team of passionate and committed faculty, who takes pride in conducting multi-disciplinary and innovative research in different aspects of healthcare. Our commitment enables the translation of research into impactful healthcare outcomes and improve lives. More information on the department is available at https://medicine.nus.edu.sg/nursing/

The Role
In this position, you will be working on software engineering for implementing source code to develop a stand-alone mobile app-based platform for the collection, analysis of
data related to managing heart conditions. You will work closely with software engineers, data analysts, project managers and industry partners to produce software design and architectures for prototyping and validating platforms towards managingwellness for end users.

Responsibilities

What Will The Role Include
• Collaborate with the design team, other software engineers and product managers to design, build, enhance, and test new features
• Write clean and maintainable code that is properly tested and reviewed
• Understand the product thoroughly; Analyse, design and develop functionalities based on product requirements
• Work with researchers to implement and develop parallel and distributed systems
• Identify and fix problems to improve stability and user experience
• Explore and evaluate the practicality of new technologies to improve existing processes and/or products
• Participate in regular development meetings and client engagement events

Qualifications

• Bachelor's or Master’s degree in Computer Science, and Computer Engineering
• 2-3 years of front-end software engineering experience; candidate should prepare their software engineer portfolio repository for review
• Experience with iOS mobile app development is a must
• Knowledge of at least one of the server-side languages (Java, .NET, Python, Docker, Flask)
• Proficiency with fundamental front-end languages such as HTML, CSS, React Native, Flutter and JavaScript
• Understanding of JavaScript frameworks such as Angular JS, React
• Experience with prototyping software (Figma Developer Mode) is a must
• Candidate should be organized, meticulous, independent and has good communications skills
• Candidate should be able to work independently as well as be a player in multidisciplinary teams

Application

Remuneration will be commensurate with the candidate’s qualifications and experience. Preference will be given to those with previous experience in project management and relevant research. Informal enquiries are welcome and should be made to Dr Abhinit Kumar Ambastha, E-mail: [email protected]
Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of three (3) referees to the NUS Career Portal.

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

We are a design and build contractor in the construction industry

We also provide project management services in the construction industry.

Roles and Responsibility:

1. To assist project manager in managing construction projects in industrial /residential sectors

2. To assist project manager in managing client ,consultants , subcontractors and peers in project delivery context

3. To be responsible for progress reporting

Skill & Certification

5. Attained Degree or diploma is construction disciplines

6. Attained Safety Course for project manager certificate

7. Proficient in project Microsoft project

8. Proficient in autocad software

9. Min 1 to 3 years experience in construction industry.

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Excellent execution on assembly process for 1st NPI success and smooth transfer process from NPI to HVM

• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with multi-functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and package

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and apply key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:

• Bachelors/ Masters in Engineering
  
• Showcase leadership experience/potential
  
• Have engaged in projects during internships
• Great teammate
  
• Showcase critical thinking
• Keen interest in Semiconductor industry

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

This project aims to investigate the performance of cementitious materials and 3D printed concrete against ballistic impact. The researcher will be required to cast and fabricate the various cementitious materials and 3D printed concrete, prepare the logistics and perform the relevant ballistics tests.

Job Requirements

The research fellow should have at least 3 years relevant experience in the following two areas:
• 3D concrete printing;
• Conducting laboratory ballistic tests.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

As a Software Engineer in the Thales Embedded Product Development Team, you will participate in the design, implementation, validation and deployment of embedded applications products to the major OEM smartphone customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Proficient in C/Java programming languages
• Degree in Electrical/Electronics/Computer Engineering or related fields
• Team player with good communication and collaborative skills, ability to work independently and proactively.
• Knowledge of embedded technology/ecosystem, software security or Javacard will be a plus
• Prior experience as software engineer will be a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

Job responsibilities:

• Report to, and provide support to the Lead/ Senior Instrumentation Engineer on assigned projects and report to the Head - Instrumentation Engineering at the basis level.
• Be familiar with and implement Company work processes, procedures and quality policy as appropriate on assigned areas of projects.
• Be aware of Company contractual requirements and Scope Boundaries
• Responsible for work assigned by the Lead / Senior Engineers through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements relevant to his/ her assigned scope of work. Specific duties could include:
• Prepare requisitions, specifications and datasheets as assigned.
• Evaluate vendor offers and prepare Technical Bid Evaluation Report for assigned packages.
• Populate Instrument database such as SPI/Aveva Instrumentation.
• Prepare and Issue documents such as Instrument Index, Hazardous Are registers etc
• Provide inputs to designers to develop design/drafting deliverables such as cable block diagrams, wiring diagrams, Layouts and review these deliverables
• Assist in preparation of control system deliverables such as I/O lists, Control narratives, Cause and Effect Matrix etc.
• Review and provide technical inputs on Instrumentation Engineering related technical matters to interfacing disciplines
• Review and provide technical inputs to equipment/ package related technical matters
• Be responsible for and manage the Instrumentation Engineering technical interfaces with equipment and package suppliers, in coordination with the Lead/ Senior Instrumentation Engineer, for assigned areas to ensure that the equipment and packages comply with the technical requirements & specifications of and to monitor the compliance to Client’s Basis of Design, Standards & Project Specifications.
• Continuously seek to improve discipline working methods, tools and procedures and contribute actively to “Discipline Development” and “Experience Transfer”.

Work experience requirements:

• Minimum of 3 years of work experience in instrumentation engineering activities such as preparation of data sheets, specifications, Technical Bid Evaluation reports etc in a reputed engineering consultancy.
• Applicants with less than 5 years of relevant Instrumentation Engineering experience may be considered for junior positions.

Qualifications:

• Bachelor’s Degree in Instrumentation/Electrical/Chemical Engineering with relevant work experience as per above.

Other skills:

• A self-starter who can work independently, make sound decisions, analyse problems and provide focused solutions.
• Good understanding and knowledge of oil and natural gas industry standards such as, but not limited to, API (American Petroleum Institute), ISO (International Organisation for Standardisation),IEC, NORSOK, EU Directives ATEx, IECex requirements and other relevant standards related to Instrumentation Engineering.
• Effective verbal and written communication skills in English
• Experience in engineering of Oil and Gas offshore projects would be an advantage.
• Experience in SPI/Aveva Instrumentation would be an advantage.
• Applicant shall have strong computer literacy in commonly used business software applications such MS Word, MS excel, Teams etc.
  
  We regret that only shortlisted candidates will be notified.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Job Responsibilities:

• Design and commissioning of building electrical systems including, fire alarm, EVCS, power distribution, lighting, lightning protection etc.
• Perform Lighting Power Budget calculations.
• Understand and design Single Line Diagram and perform electrical load calculations.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements and site supervision.
• Participate in Testing & Commissioning phase of completed electrical installations.

Experienced Electrical Engineer with minimum 5 years of relevant experience is welcomed to apply.

Requirements:

• An electrical engineering degree recognised by the PEB of Singapore.
• Familiar with statutory code and requirements.
• Minimum 5 years of work experience as a Electrical design Consultant in an M&E consultancy firm.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated Research Engineer to join our team, specializing in the hands-on experimentation and characterization of materials. The successful candidate will work closely with the research team to conduct materials characterization, perform electrochemical testing, and contribute to the development of innovative solutions for lithium battery recycling. This role requires a candidate with hands-on experience in material science techniques and electrochemical methods.
Key Responsibilities:

1. Perform experiments and characterization of materials using analytical techniques such as ICP, XRD, and FTIR.
2. Conduct electrochemical analysis, including cyclic voltammetry, LSV and other related techniques.
3. Prepare samples for testing and ensure proper calibration and maintenance of equipment.
4. Analyze and interpret experimental data, providing clear and concise reports to the research team.
5. Collaborate with cross-functional teams to ensure experimental objectives are achieved.
6. Maintain accurate records of experiments and uphold laboratory safety protocols.
7. Assist in troubleshooting and optimizing experimental procedures as needed.
8. Assist in lab procurement activities.

Qualifications

1. Bachelor’s or Master’s degree in Materials Science and Engineering, Chemical Engineering, or a related field.
2. Hands-on experience with material characterization techniques such as ICP, XRD, SEM and FTIR.
3. Proficiency in electrochemical methods is highly preferred.
4. Strong analytical and problem-solving skills with attention to detail.
5. Effective communication skills, both written and verbal, to document and present findings.
6. Ability to work independently as well as collaboratively within a team.
7. Knowledge of laboratory safety protocols and best practices.
8. Experience in data analysis and interpretation software (e.g., Origin).
9. Familiarity with additional characterization techniques is an added advantage.
10. Prior experience in an R&D or industrial laboratory setting.

A. Overall Purpose Of The Job

As a member of the Service Desk team, this position serves as a single point of contact for all IT issues and requests reported by users through the different support channels (phone, email, Self-Service Portal, Tech Concierge Desk). It is responsible for providing support (remotely or onsite) on company supported computer software, applications, and platforms.

B. Key Responsibilities

The scope of responsibilities includes the following:

• Serve as the first point of contact for users experiencing technical issues via different support channels (phone, email, Self-Service Portal, Tech Concierge Desk).
• Diagnose, troubleshoot, and resolve hardware, software, and network issues efficiently. ● Log incidents and requests accurately in the service management tool, categorizing and prioritizing them based on urgency and documenting with event timeline.
• Escalate unresolved issues to relevant next level support team (L2/L3)
• Ensure effective management of all incident priorities including Major Incidents, Priority 1,2,3 and 4 and service requests through various communication channels, including phone, email, and in-person interactions at the concierge desk .
• Act as an Incident Manager and drive end-to-end Major Incident and Priority 1 incident management process
• Monitor ticket, email, chat, phone queues and agent performance to ensure adherence to service level agreements (SLAs) and quality standards
• Handle user account lifecycle management (Joiner, Mover & Leaver), access provisioning in accordance with company IT security policies.
• Perform regular out of office hours on call duties as per operational needs
• Oversee DSAT feedbacks and take corrective action
• Handle account provisioning across various system platforms (Active Directory, GSuite email account, Windows, Linux etc) for staff and generic accounts such as service accounts, admin account or FTP.
• Oversee daily cessation activities and evaluate any potential issues to ensure compliance with audit requirements.
• Provide reports upon stakeholder requests to list the active users or users associated with a specific application.
• Manage and process IT service requests, assist in projects including user profiling setup, software installation, and system configuration

● Assist in DWS (Digital Workplace Services) BAU tasks and projects such as but not limited to the following:

• OS imaging, deployment, upgrade, and tracking (Windows and Mac)
• Endpoint device management
• Hardware refresh
• Maintain up-to-date knowledge base articles for common issues, troubleshooting steps, and SOPs used by the Service Desk team
• Collaborate with cross-functional teams (Product Managers, Engineering, Architects, etc.), and business stakeholders and ensure proper escalation to improve service delivery and user experience.
• Communicate effectively with end-users, keeping them informed of the status of incidents and requests.
• Monitor alerts triggered from servers, databases, or systems and inform the respective teams for necessary actions.

C. Job Profile

• Required Qualifications
• Degree/Diploma in Computer Science, Information Technology, or related field • Proven work experience in an IT support function such as a Service Desk Agent, Desktop Support Engineer, or other similar roles
• Working knowledge and experience on ITSM ticketing tools (ServiceNow, etc.) • Working knowledge and experience on computer hardware, OS, software, and applications both in Windows and Mac environments.
• Comfortable in supporting users over the phone, onsite, or remotely using remote access tools such as Teamviewer
• Possess an ITIL v3 and above Foundation certification is an advantage
• Knowledge of user access management processes and tools such as Sailpoint or OKTA is a plus.

Required Competencies

• Excellent written and verbal communication skills
• A minimum of 5 years of experience in a 24X7 service desk or technical support role
• Good interpersonal and problem-solving skills
• Able to multitask and prioritize the tasks accordingly
• Pragmatic and flexible mindset to succeed in an ever-changing and dynamic environment • Capacity to learn and adapt to new technologies fast
• Ability to proactively carry out tasks independently or with minimal supervision
• Clearly and calmly communicating with team members or stakeholders to manage expectations and coordinate efforts during high-stress situations.

About the Role:
Are you passionate about ensuring the delivery of high-quality, impactful solutions? As a QA Engineer, you’ll play a critical role in transforming personalized healthcare by ensuring our cutting-edge AI and telehealth solutions meet the highest standards. Working closely with our Head of Engineering and a dynamic team, you’ll design and execute rigorous testing processes to support the development of game-changing healthcare technology for Asia.

This isn’t just about testing—it’s about building the future of healthcare. From ensuring the scalability of AI-driven relationship management to verifying personalized health insights and tailored treatments, you’ll help redefine what’s possible in telehealth.

Why Join Us?
This is more than just a job—it’s a mission. While there may be trade-offs in compensation, we offer the chance to be part of something transformative. You’ll take ownership of QA processes for impactful projects, working with a passionate team dedicated to using technology and innovation to change lives.

What You’ll Do:

• Review quality specifications and technical design documents to provide timely and meaningful feedback.
• Develop and maintain detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate quality testing activities across our engineering projects.
• Design and execute manual and automated test cases to validate AI and telehealth solutions.
• Identify, document, and track software defects to resolution, ensuring timely fixes.
• Collaborate with developers and the Head of Engineering to ensure seamless integration of QA processes into the development lifecycle.
• Continuously improve QA processes, tools, and techniques to support scalable, high-quality solutions.

Who You Are:

• You are passionate about delivering high-quality solutions that make a meaningful difference.
• You have experience in developing and executing manual and automated test cases.
• You’re skilled in reviewing technical design documents and creating test plans and cases.
• You’re familiar with QA tools, methodologies, and frameworks.
• You thrive in fast-paced, high-growth environments and enjoy building solutions from scratch.
• You have strong analytical and problem-solving skills and are detail-oriented.
• Experience in healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions matter.
• Ownership over impactful QA projects with the freedom to shape testing strategies.
• Flexibility to work remotely with occasional travel across Asia to collaborate with the team.
• An opportunity to join a mission-driven team passionate about making a real difference in healthcare.

Why Join Us?

• Impact: Play a pivotal role in ensuring the quality of transformative healthcare solutions.
• Ownership: Full responsibility over QA processes and the freedom to shape testing methodologies.
• Flexibility: Work remotely, with opportunities for travel across Asia.
• Mission-Driven: Join a team passionate about changing lives through technology and innovation.

Join us, and let’s redefine healthcare together.

The O&M Engineer is responsible for the operation and maintenance (O&M) of all PV systems in our portfolio. He/she shall maintain high system performance standards and promptly address any faults to minimise downtime. The role also includes contributions to customer care, communications design, and contractual matters, aligning with the broader objectives of the organisation.

In addition, the O&M Engineer is expected to adhere to both local and international solar O&M standards, ensuring compliance with best practices and regulatory requirements. He/she should actively identify and integrate technological advancements to enhance the O&M scope, optimise system performance, and reduce downtime.

The O&M Engineer will:

• Conduct detailed diagnostics and troubleshooting for PV system performance issues, ensuring minimal downtime.
• Monitor PV systems and respond to faults and breakdowns.
• Analyse operational data to identify trends, inefficiencies, or potential risks to system performance.
• Supervise and guide technicians during maintenance, repair, and troubleshooting activities.
• Record faults, alarms, and maintenance actions in the company’s internal tracking system.
• Prepare comprehensive maintenance and performance reports for internal stakeholders and clients.
• Plan and implement preventive and corrective maintenance schedules.
• Ensure compliance with local and international solar O&M standards such as SS601, IEC62446 and IEC61724.
• Ensure compliance with safety standards (ISO45001) and quality management protocols (ISO9001) during all on-site activities.

Requirements

• Degree or Diploma in Engineering, preferably Electrical or Renewable Energy.
• 2-4 years of relevant experience in Solar PV or electrical systems.
• Strong knowledge of PV systems, inverters, and related equipment.
• Experience with SCADA systems and performance monitoring tools is a plus.
• Excellent problem-solving skills and the ability to work under pressure.