JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

RESPONSIBIITIES & DUTIES

* To design, write & troubleshoot machine electrical & control systems for factory automation, smart-factory technologies as well as AI platform.

*To design and perform detailed designing for machine electrical control systems for Factory Automation, Smart-Factory Technologies, Machine & Equipment Manufacturing.

*To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

* To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

*To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

*To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

*To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART-FACTORY TECHNOLOGIES & SOLUTIONS

*To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

*To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

*To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

PROGRAMMING SKILLS & REQUIREMENTS

* PLC based system: ladder, functional block, structure text

* PC based system: C++, VB (visual basic)

Job Description

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams, etc.
• Work with 3D design team for 2D deliverables
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization
• Site inspection and clarification
• Change management
• Communication to integrate with project team of engineers and technicians for efficient deliveries

Requirements

• In-depth knowledge of power plant engineering, prefer to have working experience in Singapore.
• Minimum 5 years working experience for Electrical composite plant project
• Familiar with relevant codes, international standards, Singapore local standards, client Design Specifications and procedures.
• procedures, and have a thorough working knowledge of the latest design and analytical techniques
• Familiar with cable interconnections, cable tray routing, cable tray support engineering design, equipment layout, installation materials, cable accessories selection, cable drum schedule, etc
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks and Autocad
• Strong verbal and written communication skills for effective collaboration and reporting.
• Collaborate with different parties for plant engineering coordination.

Responsibilities

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.
• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.
• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.
• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.
• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.
• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.
• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.
• Coordinate and track procurement activities for green marine system components.
• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.
• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.
• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.
• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.
• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.
• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.
• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.
• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.
• Excellent analytical and problem-solving abilities, with a keen attention to detail.
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.
• Strong leadership skills, with the ability to motivate and guide project teams.
• Knowledge of procurement processes and experience in managing supplier relationships.
• Familiarity with industry safety standards and practices, and ship classification society requirements for marine vessels.
• Ability to travel to project sites and work in outdoor or shipyard environments as needed.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

We are looking for a dedicated ITSM Engineer with at least 2-3 years of experience in ITSM to join our growing team. In this role, you will be responsible for implementing and managing IT Service Management (ITSM) processes and tools to improve service delivery and support for our external clients. You will work closely with cross-functional teams to ensure best practices are followed and that our IT services align with business objectives.

Key Responsibilities:

• Design, implement, and optimize ITSM processes, including Incident Management, Change Management, Problem Management, and Service Request Management.
• Administer and support ITSM tools (e.g., BMC, ServiceNow, Jira Service Management) to enhance service delivery and reporting capabilities.
• Collaborate with IT and business teams to define service levels, create service catalogues, and ensure compliance with agreed-upon service level agreements (SLAs).
• Analyse service performance metrics and trends to identify areas for improvement and implement solutions.
• Collaborate with the sales team to understand client requirements and demonstrate how our ITSM solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our ITSM tools.
• Facilitate training sessions and workshops to promote ITSM best practices and tool usage across the organization.
• Assist in the development and maintenance of ITSM documentation, including process flows, user guides, and knowledge articles.
• Participate in continuous improvement initiatives to enhance IT service quality and efficiency.

Job Requirements:

• 2-3 years of experience in Design, Implement or operations of IT Service Management tools or a related role, with a strong focus on ITSM tools and processes.
• Proficiency in ITSM platforms such as BMC, ServiceNow, Jira Service Management, or similar tools in deployment and operations.
• Understanding of ITIL (Information Technology Infrastructure Library) frameworks and best practices.
• Experience with incident, change, and problem management processes.
• Strong analytical and problem-solving skills, with the ability to manage multiple tasks effectively.
• Excellent communication and interpersonal skills, with a collaborative approach to working with teams.
• Experience integrating ITSM tools (e.g., ServiceNow, BMC, Jira) with other enterprise systems (e.g., monitoring tools, CRM, ERP).
• Proficiency in using APIs to connect ITSM tools with other applications to streamline workflows and data exchange.
• Familiarity with integrating third-party services or applications that enhance ITSM capabilities (e.g., chatbots for incident reporting).
• Proficiency in scripting languages (e.g., Python, PowerShell) to automate repetitive tasks and enhance ITSM tool functionality.
• Ability to design and implement automated workflows that enhance service delivery and reduce manual intervention.

Preferred Qualifications:

• ITIL certification or other relevant ITSM tools certifications.
• Familiarity with automation tools and techniques to streamline ITSM processes.
• Experience in project management or agile methodologies.

Work location: Jurong East

General Overview

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time.

Job Responsibilities:

• Prepare method statements,
• Liaise with the stakeholders (e.g. clients, consultants) on permits, drawings, and design matters. Ensure the quality of all construction work performed on site are in accordance with the Company’s Integrated Management System, specifications, and applicable legislative requirements.
• Conduct site inspection/audit on the sub-contractor/vendor to ensure works are following approved method statements and specifications & proper sequence of work.
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Planning and deployment of resources such as manpower, machinery, equipment and material
• Preparation of progress report
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and aim for zero accident in the workplace

Job Requirements:

• Work experience of rigid inclusion, piling, wharf superstructure, drainage works, electrical & communication works, concrete foundation works, etc. for Civil Infrastructure Project
• Diploma / Degree in Engineering (Civil) / Construction Engineering (Civil) / or equivalent.
• Familiar with our local standard and safety aspects in the construction industry.
• Strong team management and leadership skills.
• Problem solving and conflict resolution skills.
• Excellent written and verbal communication skills.
• Contract basis
• 5.5 days working week
• Project site located at Tuas

Halliburton invites qualified candidates to apply for the Software Engineer position.

The Software Engineer will leverage his/her strong software design and programming skills to provide technical leadership and build software solutions to address complex business needs.

Responsibilities

• Design and develop professional quality desktop applications in an agile environment
• Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
• Ensure the Technical Software Development process is optimized and projects are on track
• Define requirements, functional specifications, and testing documentation for various engineering software applications
• Design and develop unit test for code validation and automated regression testing of overall systems validation
• Incorporate lab testing and field testing with various cross-functional teams
• Job role contributes to value creation

Required Education and Skills

1. Bachelor’s degree in Computer Engineering or Computer Science
2. Minimum 3 years of related experience in software development.
3. Self-initiative, independent and a good team player
4. In addition to the above, candidate must have a minimum of 3 years of experience in the following

• Strong development experience using C++
• Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies
• Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
• Developing multi-threaded applications
• Developing Real-Time solutions (applications that run within a fixed-time constraint)
• Developing software using SQL, MS Access DB and MongoDB
• Developing software via Agile software development methodology
• Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
• Developing, debugging, and supporting software applications both locally and in remote locations
• Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
• Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
• Experience in Embedded Software development and Real-Time Operating System is added advantage

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Work Location: 315 Jalan Ahmad Ibrahim Singapore 639940 (company transport provided)

Work Schedule: 7:30 am to 4:30 pm

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to generative design.

Key Responsibilities:

• Deploy, optimize, and integrate generative AI models onto edge devices, ensuring efficient performance in real-world applications.
• Develop robust pipelines and frameworks for AI model inference on edge platforms, considering hardware constraints and latency requirements.
• Optimize AI models for power efficiency, memory footprint, and computational speed, utilizing techniques like quantization, pruning, and model distillation.
• Conduct thorough testing, debugging, and performance validation of deployed models under various real-world conditions.
• Work closely with researchers, data scientists, and software engineers to bridge the gap between research prototypes and deployable solutions.

Job Requirements:

• Master’s degree or above in Computer Science, Electrical Engineering, Artificial Intelligence, or a related discipline.
• Bachelor’s degree holders with relevant industry experience are also encouraged to apply.
• Strong background in machine learning and deep learning, particularly in generative AI models.
• Proficiency with relevant programming languages and frameworks such as Go, Python, C++, and CUDA.

Additional Criteria:

• Industrial experience in relevant areas such as AI deployment, edge computing, or R&D is desirable.
• Ability to work independently with limited supervision and collaborate effectively within a multidisciplinary team.
• Strong problem-solving skills and the ability to adapt to hardware constraints and real-world challenges.
• Familiarity with edge computing platforms (e.g., NVIDIA Jetson, ARM Cortex, and mobile chipsets) and related tools.

We regret that only shortlisted candidates will be notified.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to generative design.

Key Responsibilities:

• Deploy, optimize, and integrate generative AI models onto edge devices, ensuring efficient performance in real-world applications.
• Develop robust pipelines and frameworks for AI model inference on edge platforms, considering hardware constraints and latency requirements.
• Optimize AI models for power efficiency, memory footprint, and computational speed, utilizing techniques like quantization, pruning, and model distillation.
• Conduct thorough testing, debugging, and performance validation of deployed models under various real-world conditions.
• Work closely with researchers, data scientists, and software engineers to bridge the gap between research prototypes and deployable solutions.

Job Requirements:

• Master’s degree or above in Computer Science, Electrical Engineering, Artificial Intelligence, or a related discipline.
• Bachelor’s degree holders with relevant industry experience are also encouraged to apply.
• Strong background in machine learning and deep learning, particularly in generative AI models.
• Proficiency with relevant programming languages and frameworks such as Go, Python, C++, and CUDA.

Additional Criteria:

• Industrial experience in relevant areas such as AI deployment, edge computing, or R&D is desirable.
• Ability to work independently with limited supervision and collaborate effectively within a multidisciplinary team.
• Strong problem-solving skills and the ability to adapt to hardware constraints and real-world challenges.
• Familiarity with edge computing platforms (e.g., NVIDIA Jetson, ARM Cortex, and mobile chipsets) and related tools.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Descritption:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion.
• Patrol / Check machine condition / Report / Service proposal w quotation & manage prospectives / secure order / execute maitenance job by team
• Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis

Job Requirement

• Minimum 3 year experience in aftersales service
• Experience in handling compressor/Valve/Pump
• Minimum diploma in Mechanical engineering

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics