Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

JOB SUMMARY

Under general direction, the Technical Sales Manager is responsible for managing the technical sales aspects including segment, product line & technology packages, and all relevant technical supporting activities throughout the entire sales process. Successful activities include: collaborating within the sales organization on new customer opportunities, building strong customer relationships, technology training, collecting & analyzing customer/market insights to identify winning technology solutions, and supporting strategic sales growth initiatives. This is a key role within our organization advising and guiding the technical aspects of the sales process while working within a close collaboration with Global Technical Sales Managers (TSMs) to ensure alignment and leverage global insights and strategies.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Build credible & strong relationships by focusing on:

• Advocating, coaching, and training for the segment, product line, and/or specific technology.
• Supporting sales growth opportunities, and proposal development, in a team selling approach with sales managers and sales support operations.
• Actively supporting sales activities: customer technology needs assessment, alignment with engineering standards, technology decision, product sizing, and strategic account planning.
• Face to face interactions with customers and identified markets we serve.
• Developing multiple relationships & communication pathways within a customer
• organization focused on Engineering and Plant Operations.
• Support conference strategies including technical presentations and booth support.
• Maintaining up-to-date understanding of industry trends and technical developments.
• Identifying opportunities & advise on available technology or service solutions.
• Clearly articulate Crown’s technology offerings and advantages.
• Obtaining and coordinating data and recommendations to Sales and Sales

• Segment and Product Line development:

• Collaborate with Global Segment Commercial Leads, Engineering, & other Technical Sales Product Managers to develop cohesive standard global product offerings.
• Develop & Manage standard product line sales tool-kits including sizing programs, sales flow diagrams, mass balances, and a library of sales presentations.
• Assist marketing collateral development on product lines and new innovations.
• Support technology discussions to close the deal in an efficient and professional manner.
• Deliver against sales goals by supporting Sales, Sales Support, & Aftermarket team members.
• Cross functional & global collaboration. Key technical tag for Aftermarket commercial support connecting inquiries into Sales & Engineering as needed.
• Deep understanding of technology/service value and total cost of ownership, TCO.
• Support new innovation launches with technical support & training.
• Contribute to all customer field reports after each customer visits.

• Develop testing protocols for customer piloting work as required.

• Perform other related duties as required and assigned.

QUALIFICATIONS AND SKILLS

• Bachelor’s degree in chemical, or mechanical engineering.

• Master’s degree preferred.

• 5+ years Engineering or Operations experience within the Oilseeds complex, preferably in an Oilseeds Crushing or Vegetable Oil Refining, Palm Processing, Biodiesel, and/or Oleochemical business.

• Demonstrated sales support experience.

• Strong Competitive desire to succeed & win.

• High integrity and ethics.

• Entrepreneurial spirit.

• Excellent written and verbal communication skills.

• Effective at problem solving and conflict resolution.

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Strong attention to detail.

• Technology advocate into customer focus.

• Establish and maintain effective working relationships with co-workers, customers, and vendors.

• Responsive to requests and inquiries from internal and external customers.

• Well-developed presentation skills.

• Knowledge of computers and applications, such as Microsoft Word, Excel, TEAMS and PowerPoint, SharePoint.

• Must be able to communicate in English fluently. Ability to communicate in a second language – European or Asian languages preferred but not required.

• Customer relationship management (CRM) experience a plus.

• Process Modeling experience – ChemCad, Aspen modeling a plus.

• Ability to travel internationally and domestically up to 25% of the time.

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE

The Centre Management System Support, Executive/Senior Executive is responsible for overseeing the upkeep, procurement & maintenance of all exhibits, audio-visual equipment, facilities and essential services for daily operations for centres/museums under Defence Collective Singapore (DCS).

RESPONSIBILITIES

• Maintenance Planning: Planning and implementation of building maintenance programs for architectural, electrical, and mechanical, exhibits and attractions AV lighting systems. Co-ordinate and liaise with internal and external vendors for the execution of maintenance services. Conduct joint inspection rounds with Specialists/Technical Officers on building/Exhibit/AV & lighting defects.
• Safety Compliance: Ensure compliance with safety equipment, work methods, and procedures. Promptly rectify any unsafe situations, adhering to Workplace Safety and Health (WSH) regulations. Be responsible for implementing Company’s SOP and policies including compliance to QEHS policies. Conducting regular checks on the entire building to ensure the prompt removal of fire hazards, proper functioning of fire escapes, fire doors, and obstruction-free access.
• Supervise Works: Control and supervise all AV Lighting and exhibition related works performed by Specialists/Technical Officers and contractors, including those carried out by tenant's fitting out contractors. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set by DCS.
• Repairs and Emergency Situations: Responding to emergency situations & troubleshoot sound and video and ensuring prompt repairs of property facilities. Providing updates to Centre Management team with regards to the situation.
• Procurement: Manage budgetary control of expenditures including preparation of annual budgets and forecast. Conduct tender exercises for OPEX/CAPEX works such as replacement, upgrading or redevelopment works and manage such works according to timeline including putting up of documents and procurement for OPEX/CAPEX requests.
• Daily Operations: Responsible for the coordination of meetings and events such as logistics support, obtaining quotations, raising of invoices etc. Conduct regular inspection of the centre to ensure high standard of cleanliness and service are provided by term contractors related to cleaning, landscape, pest control etc.
• Reports: Monitor and report on the work progress of minor improvement projects or A&A work. Tabulate inspection report and plans for defects rectification.
• Project Management: Procurement of services as well as management of services and projects from inception, execution and to completion. Project lead to manage all aspects of project.
• Event Management: To provide audio, visual and media services for events and activities (e.g. Family Day, celebrations, etc). To help staff (hands-on) on setup of technology in the venues.
• Others: provide training to staff and students on the use of AV and lighting equipment, carry out any ad-hoc duties, handyman work, projects as assigned.

REQUIREMENTS

• Minimum diploma in the audiovisual technology, sound engineering, lighting design technology or any related field, such as digital media or related disciplines.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Possess strong working knowledge with maintenance work, local codes and regulations. Familiar with statutory requirements on building services, facility operations, maintenance, and safety.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Able to work on rotating shifts, weekends, and public holidays.
• Relevant experiences in facilities management/MCST, ACMV, M&E Systems, building automation system (BAS), Certification as Fire Safety Manager will be an added advantage.

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• Able to communicate with Chinese customers and English-speaking vendors.
• A team player

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

The Digital Supply Chain Group of the Resilient Value Chain Division at ARTC is searching for a Senior Research Engineer to lead and support engineering projects focused on operations research using advanced analytics, simulations, and optimization.

Responsibilities:

Innovate and Develop New Solutions:

Design and prototype novel algorithms, tools, and systems to solve complex operational and industrial challenges.

Conduct research and feasibility studies to create innovative, scalable, and efficient engineering solutions that meet industry needs.

Lead the Development Process:

Lead end-to-end development of research concepts into functional engineering prototypes, ensuring they are industry-ready.

Collaborate with cross-functional teams to transition research results into tangible, deployable products or solutions.

Apply Advanced Research in Engineering:

Leverage cutting-edge technologies such as simulations (discrete-event & agent-based), network analysis, and optimization techniques to develop solutions.

Implement machine learning and AI technologies into operational processes to enhance decision-making capabilities.

Conduct Performance Testing and Optimization:

Evaluate the performance and scalability of developed solutions through testing and optimization.

Continuously improve prototypes by analyzing performance data and making necessary adjustments.

Collaborate with Industry Partners:

Work closely with industry partners to ensure that developed solutions align with real-world applications and requirements.

Engage with stakeholders to gather feedback and refine research prototypes for successful industry adoption.

Job Requirements:

• Bachelor or Master Degree in Engineering, Computer Science, Operations Research, or related fields.
• At least 3 years of experience
• Strong foundation in mathematical modeling, algorithm design, and scientific computing.
• Expertise in simulations (discrete-event, agent-based) and optimization techniques.
• Proficiency in programming languages such as Python, C, C++, or MATLAB.
• Familiarity with machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-learn) and optimization libraries (e.g., Gurobi, CPLEX).
• Experience in data structures, algorithm development, and software development best practices.
• Prior experience in operational optimization, such as fleet management, scheduling, or network design, is highly preferred.
• Experience applying research in practical settings such as aerospace, logistics, energy, manufacturing, or supply chain management.
• Familiarity with Industry 4.0 technologies such as advanced robotics, automation, or smart manufacturing.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

Job Responsibilities

• Develop and conduct research in development of high-power density vanadium redox flow battery stack by designing flow fields, manifolds, material treatment etc.
• Design, model, simulate, test, and characterize vanadium redox flow battery stacks of various sizes.
• Perform material and electrochemical characterization (both in-situ and ex-situ techniques such as cell cycling, CV, EIS, segmented cell, polarization tests, pH tracing, spectroscopy, XRD, through plane/ in plane resistivity, etc.) to reduce the stack resistivity and improve the capability to operate at high current density.
• Project management including project planning, progress tracking, manage resources, and work together with interns, research staffs and international collaborators.
• Develop IPs and Publish in high quality journals.

The work requires an in-depth understanding of electrochemistry of flow batteries, simulation/modelling skills, material fabrication, material characterization tools, and engineering integration of various components of vanadium redox flow battery stacks. The candidate should be able to work on dynamic, product-oriented group and manage the multiple tasks independently. Passion for research and multitasking abilities makes you the head of research group at VFlowTech with additional benefits.

Job Requirements

• Bachelor, Master’s Degree or PhD in Power Electronics, Renewable Energy, or relevant faculty.
• Knowledge about solar/photovoltaic (PV), wind, or fuel cell power generation systems.
• Knowledge of microgrid systems and their interactions with distribution systems.
• Experience in hardware-in-loop modeling and simulations.
• Knowledge of different microgrid control architectures, different control modes of inverter-based resources, droop controls, consensus algorithms and their applications on microgrid load power sharing and voltage regulation.
• Experience in analyzing and modeling the dyanamics of a diversity of distributed energy and emerging grid resources (solar, wind turbine, small hydros, microturbines, energy storage, electric vehicle charging, power flow controller, etc.)
• Ability to provide engineering specifications and electrical drawings, to conduct field testing and troubleshooting.
• Extensive knowledge of industry standards, and government regulations.

Desired Skills and Experiences

Power Generation, Cell, Troubleshooting, Written English, Modeling, Electrical, Estimates, Structural Engineering, Simulations, Renewable Energy, API, FEED, Soil, Manufacturing, Electronics, Design Management

Your benefits

· Receive support in your own self-development (regular feedback and coaching sessions, access to personal development material, workshops, start-up presentations, and networking events)

· Make key decisions that impact the future of the company

· Enjoy regular team lunches and social events

· A secured employment in a constantly growing company and a future-proof industry with a multitude of personal development opportunities

· Work in an environmentally conscious company - we see climate action as a responsibility

· Competitive remuneration package

· Dental and Medical Benefits

Our company culture

Our team is diverse, international and shares the drive to make a difference and create change.

· We encourage our team to bring in their ideas and take initiatives that make them proud of

· We foster a rapidly scaling working environment with a very entrepreneurial, innovative and collaborative culture

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan